From: Russell King <rmk+kernel@arm.linux.org.uk>
To: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>,
David Airlie <airlied@linux.ie>,
dri-devel@lists.freedesktop.org, Rob Clark <robdclark@gmail.com>,
Darren Etheridge <darren.etheridge@gmail.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Subject: [PATCH RFC v3 3/4] DRM: Armada: convert Armada hardware cursor support to RGB+transparency
Date: Mon, 10 Jun 2013 23:50:52 +0100 [thread overview]
Message-ID: <E1UmAvM-0006Eb-OL@rmk-PC.arm.linux.org.uk> (raw)
In-Reply-To: <20130609190612.GM18614@n2100.arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/gpu/drm/armada/Kconfig | 6 +-
drivers/gpu/drm/armada/armada_crtc.c | 186 +++++++++++++++++++++++----------
drivers/gpu/drm/armada/armada_crtc.h | 5 +-
3 files changed, 135 insertions(+), 62 deletions(-)
diff --git a/drivers/gpu/drm/armada/Kconfig b/drivers/gpu/drm/armada/Kconfig
index 6f64642..c401339 100644
--- a/drivers/gpu/drm/armada/Kconfig
+++ b/drivers/gpu/drm/armada/Kconfig
@@ -15,8 +15,8 @@ config DRM_ARMADA
kernel mode setting and buffer management to userspace.
config DRM_ARMADA_CURSOR
- bool "Enable hardware cursor support for Marvell Armada DRM"
+ bool "Enable hardware RGB+T cursor support for Marvell Armada DRM"
depends on DRM_ARMADA != n
help
- Add support for hardware cursor support on the Marvell
- Armada devices.
+ Add support for RGB+transparency hardware cursor support on
+ the Marvell Armada devices.
diff --git a/drivers/gpu/drm/armada/armada_crtc.c b/drivers/gpu/drm/armada/armada_crtc.c
index 4a71ba0..b833014 100644
--- a/drivers/gpu/drm/armada/armada_crtc.c
+++ b/drivers/gpu/drm/armada/armada_crtc.c
@@ -369,8 +369,19 @@ void armada_drm_crtc_irq(struct armada_crtc *dcrtc, u32 stat)
val = readl_relaxed(base + LCD_SPU_ADV_REG);
val &= ~(0xfff << 20 | 0xfff);
val |= dcrtc->v[i].spu_adv_reg;
- writel_relaxed(val, dcrtc->base + LCD_SPU_ADV_REG);
+ writel_relaxed(val, base + LCD_SPU_ADV_REG);
}
+
+ if (stat & DUMB_FRAMEDONE && dcrtc->cursor_update) {
+ writel_relaxed(dcrtc->cursor_hw_pos, base + LCD_SPU_HWC_OVSA_HPXL_VLN);
+ writel_relaxed(dcrtc->cursor_hw_sz, base + LCD_SPU_HWC_HPXL_VLN);
+ armada_updatel(CFG_HWC_ENA,
+ CFG_HWC_ENA | CFG_HWC_1BITMOD | CFG_HWC_1BITENA,
+ base + LCD_SPU_DMA_CTRL0);
+ dcrtc->cursor_update = false;
+ armada_drm_crtc_disable_irq(dcrtc, DUMB_FRAMEDONE_ENA);
+ }
+
spin_unlock(&dcrtc->irq_lock);
/* Only on frame 0 IRQs (start of progressive / odd frame) */
@@ -481,6 +492,9 @@ static int armada_drm_crtc_mode_set(struct drm_crtc *crtc,
val = adj->crtc_hsync_start;
dcrtc->v[1].spu_adv_reg = val << 20 | val;
+ /* Always enable RGB hardware cursor mode */
+ dcrtc->v[1].spu_adv_reg |= ADV_HWC32ENABLE;
+
if (interlaced) {
/* Odd interlaced frame */
dcrtc->v[0].spu_v_h_total = dcrtc->v[1].spu_v_h_total +
@@ -627,6 +641,103 @@ static const struct drm_crtc_helper_funcs armada_crtc_helper_funcs = {
};
#ifdef CONFIG_DRM_ARMADA_CURSOR
+static void armada_load_cursor_rgb(void __iomem *base, uint32_t *pix,
+ unsigned stride, unsigned width, unsigned height)
+{
+ uint32_t r, g, b, addr;
+ unsigned y, n;
+
+ for (r = g = b = addr = n = y = 0; y < height; y++) {
+ uint32_t *p = &pix[y * stride];
+ unsigned x;
+
+ for (x = 0; x < width; x++, p++) {
+ r >>= 8;
+ r |= 0xff000000 & (*p << 8);
+ g >>= 8;
+ g |= 0xff000000 & (*p << 16);
+ b >>= 8;
+ b |= 0xff000000 & (*p << 24);
+ if (x == 0 || y == 0) {
+ b |= 0xff000000;
+ g |= 0xff000000;
+ r &= ~0xff000000;
+ }
+ if (++n == 4) {
+ writel_relaxed(r,
+ base + LCD_SPU_SRAM_WRDAT);
+ writel_relaxed(addr |
+ SRAM_WRITE | SRAM_HWC32_RAMR,
+ base + LCD_SPU_SRAM_CTRL);
+ writel_relaxed(g,
+ base + LCD_SPU_SRAM_WRDAT);
+ writel_relaxed(addr |
+ SRAM_WRITE | SRAM_HWC32_RAMG,
+ base + LCD_SPU_SRAM_CTRL);
+ writel_relaxed(b,
+ base + LCD_SPU_SRAM_WRDAT);
+ writel_relaxed(addr |
+ SRAM_WRITE | SRAM_HWC32_RAMB,
+ base + LCD_SPU_SRAM_CTRL);
+ addr += 1;
+ if ((addr & 255) == 0)
+ addr += 0xf00;
+ n = 0;
+ }
+ }
+ }
+ if (n) {
+ r >>= 8 * (4 - n);
+ g >>= 8 * (4 - n);
+ b >>= 8 * (4 - n);
+ writel_relaxed(r, base + LCD_SPU_SRAM_WRDAT);
+ writel_relaxed(addr | SRAM_WRITE | SRAM_HWC32_RAMR,
+ base + LCD_SPU_SRAM_CTRL);
+ writel_relaxed(g, base + LCD_SPU_SRAM_WRDAT);
+ writel_relaxed(addr | SRAM_WRITE | SRAM_HWC32_RAMG,
+ base + LCD_SPU_SRAM_CTRL);
+ writel_relaxed(b, base + LCD_SPU_SRAM_WRDAT);
+ writel_relaxed(addr | SRAM_WRITE | SRAM_HWC32_RAMB,
+ base + LCD_SPU_SRAM_CTRL);
+ }
+}
+
+static void armada_load_cursor_alpha(void __iomem *base, uint32_t *pix,
+ unsigned stride, unsigned width, unsigned height)
+{
+ uint32_t data, addr, ram_cmd = SRAM_WRITE | SRAM_HWC32_TRAN;
+ unsigned y, n;
+
+ for (data = addr = n = y = 0; y < height; y++) {
+ uint32_t *p = &pix[y * stride];
+ unsigned x;
+
+ for (x = 0; x < width; x++, p++) {
+ data >>= 2;
+ if (*p >= 0x80000000)
+ data |= 0x40000000;
+ if (x == 0 || y == 0)
+ data |= 0x40000000;
+ if (++n == 16) {
+ writel_relaxed(data,
+ base + LCD_SPU_SRAM_WRDAT);
+ writel_relaxed(addr |
+ SRAM_WRITE | SRAM_HWC32_TRAN,
+ base + LCD_SPU_SRAM_CTRL);
+ addr += 1;
+ if ((addr & 255) == 0)
+ addr += 0xf00;
+ n = 0;
+ }
+ }
+ }
+ if (n) {
+ data >>= 2 * (16 - n);
+ writel_relaxed(data, base + LCD_SPU_SRAM_WRDAT);
+ writel_relaxed(addr | ram_cmd, base + LCD_SPU_SRAM_CTRL);
+ }
+}
+
static int armada_drm_crtc_cursor_update(struct armada_crtc *dcrtc, bool reload)
{
uint32_t xoff, xscr, w = dcrtc->cursor_w, s;
@@ -672,6 +783,8 @@ static int armada_drm_crtc_cursor_update(struct armada_crtc *dcrtc, bool reload)
if (!dcrtc->cursor_obj || !h || !w) {
spin_lock_irq(&dcrtc->irq_lock);
+ armada_drm_crtc_disable_irq(dcrtc, DUMB_FRAMEDONE_ENA);
+ dcrtc->cursor_update = false;
armada_updatel(0, CFG_HWC_ENA, dcrtc->base + LCD_SPU_DMA_CTRL0);
spin_unlock_irq(&dcrtc->irq_lock);
return 0;
@@ -680,70 +793,29 @@ static int armada_drm_crtc_cursor_update(struct armada_crtc *dcrtc, bool reload)
armada_updatel(CFG_CSB_256x32, CFG_PDWN256x32,
dcrtc->base + LCD_SPU_SRAM_PARA1);
- if (dcrtc->cursor_lw != w || dcrtc->cursor_lh != h || reload) {
+ if (dcrtc->cursor_hw_sz != (h << 16 | w) || reload) {
struct armada_gem_object *obj = dcrtc->cursor_obj;
- uint32_t *pix, *p, col2 = 0, col3 = 0;
- unsigned x, y, d, n, a;
-
- dcrtc->cursor_lw = w;
- dcrtc->cursor_lh = h;
+ uint32_t *pix;
- pix = obj->addr;
+ spin_lock_irq(&dcrtc->irq_lock);
+ armada_drm_crtc_disable_irq(dcrtc, DUMB_FRAMEDONE_ENA);
+ dcrtc->cursor_update = false;
+ armada_updatel(0, CFG_HWC_ENA, dcrtc->base + LCD_SPU_DMA_CTRL0);
+ spin_unlock_irq(&dcrtc->irq_lock);
/* Set the top-left corner of the cursor image */
+ pix = obj->addr;
pix += yoff * s + xoff;
-
- a = 2 << 14 | 15 << 8;
- for (d = n = y = 0; y < h; y++) {
- for (x = 0, p = &pix[y * s]; x < w; x++, p++) {
- uint32_t v = *p;
- unsigned b;
-
- if ((v & 0xff000000) != 0xff000000) {
- b = 0; /* transparent */
- } else if (col2 == v) {
- b = 2; /* color 2 */
- } else if (col3 == v) {
- b = 3; /* color 3 */
- } else if (col2 == 0) {
- col2 = v;
- b = 2; /* alloc color 2 */
- } else if (col3 == 0) {
- col3 = v;
- b = 3; /* alloc color 3 */
- } else {
- /* fail */
- b = 1; /* inverse (!) */
- }
-
- d |= b << n;
- n += 2;
-
- if (n == 32) {
- writel_relaxed(d, dcrtc->base + LCD_SPU_SRAM_WRDAT);
- writel_relaxed(a, dcrtc->base + LCD_SPU_SRAM_CTRL);
- a++;
- d = n = 0;
- }
- }
- }
-
- if (n) {
- writel_relaxed(d, dcrtc->base + LCD_SPU_SRAM_WRDAT);
- writel_relaxed(a, dcrtc->base + LCD_SPU_SRAM_CTRL);
- }
-
- writel_relaxed(col2, dcrtc->base + LCD_SPU_ALPHA_COLOR1);
- writel_relaxed(col3, dcrtc->base + LCD_SPU_ALPHA_COLOR2);
- writel_relaxed(h << 16 | w, dcrtc->base + LCD_SPU_HWC_HPXL_VLN);
+ armada_load_cursor_rgb(dcrtc->base, pix, s, w, h);
+ armada_load_cursor_alpha(dcrtc->base, pix, s, w, h);
}
- writel_relaxed(yscr << 16 | xscr, dcrtc->base + LCD_SPU_HWC_OVSA_HPXL_VLN);
-
+ /* Reload the cursor position, size and enable in the IRQ handler */
spin_lock_irq(&dcrtc->irq_lock);
- armada_updatel(CFG_HWC_ENA,
- CFG_HWC_ENA | CFG_HWC_1BITMOD | CFG_HWC_1BITENA,
- dcrtc->base + LCD_SPU_DMA_CTRL0);
+ dcrtc->cursor_hw_pos = yscr << 16 | xscr;
+ dcrtc->cursor_hw_sz = h << 16 | w;
+ dcrtc->cursor_update = true;
+ armada_drm_crtc_enable_irq(dcrtc, DUMB_FRAMEDONE_ENA);
spin_unlock_irq(&dcrtc->irq_lock);
return 0;
diff --git a/drivers/gpu/drm/armada/armada_crtc.h b/drivers/gpu/drm/armada/armada_crtc.h
index 16e9d93..817f29e 100644
--- a/drivers/gpu/drm/armada/armada_crtc.h
+++ b/drivers/gpu/drm/armada/armada_crtc.h
@@ -45,16 +45,17 @@ struct armada_crtc {
uint32_t spu_adv_reg;
} v[2];
bool interlaced;
+ bool cursor_update;
struct armada_overlay *overlay;
struct armada_gem_object *cursor_obj;
int cursor_x;
int cursor_y;
+ uint32_t cursor_hw_pos;
+ uint32_t cursor_hw_sz;
uint32_t cursor_w;
uint32_t cursor_h;
- uint32_t cursor_lw;
- uint32_t cursor_lh;
int dpms;
uint32_t cfg_dma_ctrl0;
--
1.7.4.4
next prev parent reply other threads:[~2013-06-10 22:50 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-09 19:06 [RFC v2 0/8] rmk's Dove DRM/TDA19988 Cubox driver Russell King - ARM Linux
2013-06-09 19:29 ` [PATCH RFC 2/8] DRM: Armada: Add Armada DRM driver Russell King
2013-06-10 11:10 ` Sebastian Hesselbarth
2013-06-10 21:48 ` Russell King - ARM Linux
2013-06-10 21:56 ` Sebastian Hesselbarth
2013-06-10 15:57 ` Rob Clark
2013-06-10 17:06 ` Russell King - ARM Linux
2013-06-10 19:59 ` Rob Clark
2013-06-10 20:08 ` Russell King - ARM Linux
2013-06-10 21:01 ` Rob Clark
2013-06-10 21:15 ` Russell King - ARM Linux
2013-06-10 22:49 ` Rob Clark
2013-06-10 22:56 ` Russell King - ARM Linux
2013-06-10 23:17 ` Rob Clark
2013-06-10 23:24 ` Dave Airlie
2013-06-10 23:35 ` Rob Clark
2013-06-10 23:36 ` Russell King - ARM Linux
2013-06-10 23:48 ` Dave Airlie
2013-06-10 23:56 ` Russell King - ARM Linux
2013-06-12 13:48 ` Russell King - ARM Linux
2013-06-12 13:56 ` Rob Clark
2013-06-12 16:49 ` Russell King - ARM Linux
2013-06-12 17:05 ` Russell King - ARM Linux
2013-06-12 19:40 ` Russell King - ARM Linux
2013-06-12 23:00 ` Russell King - ARM Linux
2013-06-13 0:17 ` Rob Clark
2013-06-13 11:19 ` Russell King - ARM Linux
2013-06-13 11:50 ` Russell King - ARM Linux
2013-06-13 13:03 ` Russell King - ARM Linux
2013-06-14 14:23 ` Daniel Vetter
2013-06-14 14:42 ` Russell King - ARM Linux
2013-06-14 19:50 ` Daniel Vetter
2013-06-14 22:15 ` Russell King - ARM Linux
2013-06-14 22:36 ` Daniel Vetter
2013-06-14 13:53 ` Daniel Vetter
2013-06-14 14:27 ` Russell King - ARM Linux
2013-06-13 12:52 ` Rob Clark
2013-06-13 12:58 ` Daniel Vetter
2013-06-12 20:04 ` Rob Clark
2013-06-10 23:38 ` Russell King - ARM Linux
2013-06-10 23:49 ` Rob Clark
2013-06-10 22:01 ` Daniel Vetter
2013-06-10 22:32 ` Russell King - ARM Linux
2013-06-10 23:12 ` Rob Clark
2013-06-11 7:33 ` Daniel Vetter
2013-06-11 8:08 ` Ville Syrjälä
2013-06-10 21:38 ` Russell King - ARM Linux
2013-06-09 19:30 ` [PATCH RFC 3/8] drm/i2c: nxp-tda998x: fix EDID reading on TDA19988 devices Russell King
2013-06-09 19:31 ` [PATCH RFC 4/8] drm/i2c: nxp-tda998x: ensure VIP output mux is properly set Russell King
2013-06-09 19:32 ` [PATCH RFC 5/8] drm/i2c: nxp-tda998x: fix npix/nline programming Russell King
2013-06-09 20:02 ` Sebastian Hesselbarth
2013-06-09 19:34 ` [PATCH RFC 6/8] drm/i2c: nxp-tda998x: prepare for video input configuration Russell King
2013-06-09 19:35 ` [PATCH RFC 7/8] drm/i2c: nxp-tda998x: add video and audio " Russell King
2013-06-09 19:36 ` [PATCH RFC 8/8] DRM: Armada: add support for drm tda19988 driver Russell King
2013-06-09 19:43 ` [RFC v2 0/8] rmk's Dove DRM/TDA19988 Cubox driver Russell King - ARM Linux
2013-06-10 22:47 ` [RFC v3 0/4] " Russell King - ARM Linux
2013-06-10 22:48 ` [PATCH RFC v3 1/4] DRM: Armada: Add Armada DRM driver Russell King
2013-06-10 22:49 ` [PATCH RFC v3 2/4] DRM: Armada: Add support for hardware cursors Russell King
2013-06-10 22:50 ` Russell King [this message]
2013-06-10 22:51 ` [PATCH RFC v3 4/4] DRM: Armada: convert hardware cursor support to 64x32 or 32x64 ARGB Russell King
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1UmAvM-0006Eb-OL@rmk-PC.arm.linux.org.uk \
--to=rmk+kernel@arm.linux.org.uk \
--cc=airlied@linux.ie \
--cc=darren.etheridge@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=robdclark@gmail.com \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox