[PATCH v3 1/2] drm/probe_helper: extract two helper functions

[PATCH v3 1/2] drm/probe_helper: extract two helper functions

[Dmitry Baryshkov]

Extract drm_kms_helper_enable_hpd() and drm_kms_helper_disable_hpd(),
two helpers that enable and disable HPD handling on all device's
connectors.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/drm_probe_helper.c | 68 ++++++++++++++++++------------
 1 file changed, 41 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 95aeeed33cf5..ab787d71fa66 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -222,6 +222,45 @@ drm_connector_mode_valid(struct drm_connector *connector,
 	return ret;
 }
 
+static void drm_kms_helper_disable_hpd(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
+
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
+		const struct drm_connector_helper_funcs *funcs =
+			connector->helper_private;
+
+		if (funcs && funcs->disable_hpd)
+			funcs->disable_hpd(connector);
+	}
+	drm_connector_list_iter_end(&conn_iter);
+}
+
+static bool drm_kms_helper_enable_hpd(struct drm_device *dev)
+{
+	bool poll = false;
+	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
+
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
+		const struct drm_connector_helper_funcs *funcs =
+			connector->helper_private;
+
+		if (funcs && funcs->enable_hpd)
+			funcs->enable_hpd(connector);
+
+		if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
+					 DRM_CONNECTOR_POLL_DISCONNECT))
+			poll = true;
+	}
+	drm_connector_list_iter_end(&conn_iter);
+
+	return poll;
+}
+
 #define DRM_OUTPUT_POLL_PERIOD (10*HZ)
 /**
  * drm_kms_helper_poll_enable - re-enable output polling.
@@ -241,26 +280,12 @@ drm_connector_mode_valid(struct drm_connector *connector,
 void drm_kms_helper_poll_enable(struct drm_device *dev)
 {
 	bool poll = false;
-	struct drm_connector *connector;
-	struct drm_connector_list_iter conn_iter;
 	unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
 
 	if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
 		return;
 
-	drm_connector_list_iter_begin(dev, &conn_iter);
-	drm_for_each_connector_iter(connector, &conn_iter) {
-		const struct drm_connector_helper_funcs *funcs =
-			connector->helper_private;
-
-		if (funcs && funcs->enable_hpd)
-			funcs->enable_hpd(connector);
-
-		if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
-					 DRM_CONNECTOR_POLL_DISCONNECT))
-			poll = true;
-	}
-	drm_connector_list_iter_end(&conn_iter);
+	poll = drm_kms_helper_enable_hpd(dev);
 
 	if (dev->mode_config.delayed_event) {
 		/*
@@ -810,24 +835,13 @@ EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
 
 static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
 {
-	struct drm_connector *connector;
-	struct drm_connector_list_iter conn_iter;
-
 	if (!dev->mode_config.poll_enabled)
 		return;
 
 	if (fini)
 		dev->mode_config.poll_enabled = false;
 
-	drm_connector_list_iter_begin(dev, &conn_iter);
-	drm_for_each_connector_iter(connector, &conn_iter) {
-		const struct drm_connector_helper_funcs *funcs =
-			connector->helper_private;
-
-		if (funcs && funcs->disable_hpd)
-			funcs->disable_hpd(connector);
-	}
-	drm_connector_list_iter_end(&conn_iter);
+	drm_kms_helper_disable_hpd(dev);
 
 	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
 }
-- 
2.39.0

[PATCH v3 2/2] drm/probe_helper: sort out poll_running vs poll_enabled

[Dmitry Baryshkov]

There are two flags attemting to guard connector polling:
poll_enabled and poll_running. While poll_enabled semantics is clearly
defined and fully adhered (mark that drm_kms_helper_poll_init() was
called and not finalized by the _fini() call), the poll_running flag
doesn't have such clearliness.

This flag is used only in drm_helper_probe_single_connector_modes() to
guard calling of drm_kms_helper_poll_enable, it doesn't guard the
drm_kms_helper_poll_fini(), etc. Change it to only be set if the polling
is actually running. Tie HPD enablement to this flag.

This fixes the following warning reported after merging the HPD series:

Hot plug detection already enabled
WARNING: CPU: 2 PID: 9 at drivers/gpu/drm/drm_bridge.c:1257 drm_bridge_hpd_enable+0x94/0x9c [drm]
Modules linked in: videobuf2_memops snd_soc_simple_card snd_soc_simple_card_utils fsl_imx8_ddr_perf videobuf2_common snd_soc_imx_spdif adv7511 etnaviv imx8m_ddrc imx_dcss mc cec nwl_dsi gov
CPU: 2 PID: 9 Comm: kworker/u8:0 Not tainted 6.2.0-rc2-15208-g25b283acd578 #6
Hardware name: NXP i.MX8MQ EVK (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_bridge_hpd_enable+0x94/0x9c [drm]
lr : drm_bridge_hpd_enable+0x94/0x9c [drm]
sp : ffff800009ef3740
x29: ffff800009ef3740 x28: ffff000009331f00 x27: 0000000000001000
x26: 0000000000000020 x25: ffff800001148ed8 x24: ffff00000a8fe000
x23: 00000000fffffffd x22: ffff000005086348 x21: ffff800001133ee0
x20: ffff00000550d800 x19: ffff000005086288 x18: 0000000000000006
x17: 0000000000000000 x16: ffff8000096ef008 x15: 97ffff2891004260
x14: 2a1403e194000000 x13: 97ffff2891004260 x12: 2a1403e194000000
x11: 7100385f29400801 x10: 0000000000000aa0 x9 : ffff800008112744
x8 : ffff000000250b00 x7 : 0000000000000003 x6 : 0000000000000011
x5 : 0000000000000000 x4 : ffff0000bd986a48 x3 : 0000000000000001
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000250000
Call trace:
 drm_bridge_hpd_enable+0x94/0x9c [drm]
 drm_bridge_connector_enable_hpd+0x2c/0x3c [drm_kms_helper]
 drm_kms_helper_poll_enable+0x94/0x10c [drm_kms_helper]
 drm_helper_probe_single_connector_modes+0x1a8/0x510 [drm_kms_helper]
 drm_client_modeset_probe+0x204/0x1190 [drm]
 __drm_fb_helper_initial_config_and_unlock+0x5c/0x4a4 [drm_kms_helper]
 drm_fb_helper_initial_config+0x54/0x6c [drm_kms_helper]
 drm_fbdev_client_hotplug+0xd0/0x140 [drm_kms_helper]
 drm_fbdev_generic_setup+0x90/0x154 [drm_kms_helper]
 dcss_kms_attach+0x1c8/0x254 [imx_dcss]
 dcss_drv_platform_probe+0x90/0xfc [imx_dcss]
 platform_probe+0x70/0xcc
 really_probe+0xc4/0x2e0
 __driver_probe_device+0x80/0xf0
 driver_probe_device+0xe0/0x164
 __device_attach_driver+0xc0/0x13c
 bus_for_each_drv+0x84/0xe0
 __device_attach+0xa4/0x1a0
 device_initial_probe+0x1c/0x30
 bus_probe_device+0xa4/0xb0
 deferred_probe_work_func+0x90/0xd0
 process_one_work+0x200/0x474
 worker_thread+0x74/0x43c
 kthread+0xfc/0x110
 ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---

Reported-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Fixes: c8268795c9a9 ("drm/probe-helper: enable and disable HPD on connectors")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Tested-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/drm_probe_helper.c | 42 +++++++++++++++---------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index ab787d71fa66..8127be134c39 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -282,7 +282,8 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
 	bool poll = false;
 	unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
 
-	if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
+	if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll ||
+	    dev->mode_config.poll_running)
 		return;
 
 	poll = drm_kms_helper_enable_hpd(dev);
@@ -304,6 +305,8 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
 
 	if (poll)
 		schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
+
+	dev->mode_config.poll_running = true;
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_enable);
 
@@ -592,10 +595,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 	}
 
 	/* Re-enable polling in case the global poll config changed. */
-	if (drm_kms_helper_poll != dev->mode_config.poll_running)
-		drm_kms_helper_poll_enable(dev);
-
-	dev->mode_config.poll_running = drm_kms_helper_poll;
+	drm_kms_helper_poll_enable(dev);
 
 	if (connector->status == connector_status_disconnected) {
 		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n",
@@ -735,8 +735,11 @@ static void output_poll_execute(struct work_struct *work)
 	changed = dev->mode_config.delayed_event;
 	dev->mode_config.delayed_event = false;
 
-	if (!drm_kms_helper_poll)
+	if (!drm_kms_helper_poll && dev->mode_config.poll_running) {
+		drm_kms_helper_disable_hpd(dev);
+		dev->mode_config.poll_running = false;
 		goto out;
+	}
 
 	if (!mutex_trylock(&dev->mode_config.mutex)) {
 		repoll = true;
@@ -833,19 +836,6 @@ bool drm_kms_helper_is_poll_worker(void)
 }
 EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
 
-static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
-{
-	if (!dev->mode_config.poll_enabled)
-		return;
-
-	if (fini)
-		dev->mode_config.poll_enabled = false;
-
-	drm_kms_helper_disable_hpd(dev);
-
-	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
-}
-
 /**
  * drm_kms_helper_poll_disable - disable output polling
  * @dev: drm_device
@@ -862,7 +852,12 @@ static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
  */
 void drm_kms_helper_poll_disable(struct drm_device *dev)
 {
-	drm_kms_helper_poll_disable_fini(dev, false);
+	if (dev->mode_config.poll_running)
+		drm_kms_helper_disable_hpd(dev);
+
+	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
+
+	dev->mode_config.poll_running = false;
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_disable);
 
@@ -900,7 +895,12 @@ EXPORT_SYMBOL(drm_kms_helper_poll_init);
  */
 void drm_kms_helper_poll_fini(struct drm_device *dev)
 {
-	drm_kms_helper_poll_disable_fini(dev, true);
+	if (!dev->mode_config.poll_enabled)
+		return;
+
+	drm_kms_helper_poll_disable(dev);
+
+	dev->mode_config.poll_enabled = false;
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_fini);
 
-- 
2.39.0

Re: [PATCH v3 1/2] drm/probe_helper: extract two helper functions

[Neil Armstrong]

On 24/01/2023 11:45, Dmitry Baryshkov wrote:
> Extract drm_kms_helper_enable_hpd() and drm_kms_helper_disable_hpd(),
> two helpers that enable and disable HPD handling on all device's
> connectors.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   drivers/gpu/drm/drm_probe_helper.c | 68 ++++++++++++++++++------------
>   1 file changed, 41 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> index 95aeeed33cf5..ab787d71fa66 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -222,6 +222,45 @@ drm_connector_mode_valid(struct drm_connector *connector,
>   	return ret;
>   }
>   
> +static void drm_kms_helper_disable_hpd(struct drm_device *dev)
> +{
> +	struct drm_connector *connector;
> +	struct drm_connector_list_iter conn_iter;
> +
> +	drm_connector_list_iter_begin(dev, &conn_iter);
> +	drm_for_each_connector_iter(connector, &conn_iter) {
> +		const struct drm_connector_helper_funcs *funcs =
> +			connector->helper_private;
> +
> +		if (funcs && funcs->disable_hpd)
> +			funcs->disable_hpd(connector);
> +	}
> +	drm_connector_list_iter_end(&conn_iter);
> +}
> +
> +static bool drm_kms_helper_enable_hpd(struct drm_device *dev)
> +{
> +	bool poll = false;
> +	struct drm_connector *connector;
> +	struct drm_connector_list_iter conn_iter;
> +
> +	drm_connector_list_iter_begin(dev, &conn_iter);
> +	drm_for_each_connector_iter(connector, &conn_iter) {
> +		const struct drm_connector_helper_funcs *funcs =
> +			connector->helper_private;
> +
> +		if (funcs && funcs->enable_hpd)
> +			funcs->enable_hpd(connector);
> +
> +		if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
> +					 DRM_CONNECTOR_POLL_DISCONNECT))
> +			poll = true;
> +	}
> +	drm_connector_list_iter_end(&conn_iter);
> +
> +	return poll;
> +}
> +
>   #define DRM_OUTPUT_POLL_PERIOD (10*HZ)
>   /**
>    * drm_kms_helper_poll_enable - re-enable output polling.
> @@ -241,26 +280,12 @@ drm_connector_mode_valid(struct drm_connector *connector,
>   void drm_kms_helper_poll_enable(struct drm_device *dev)
>   {
>   	bool poll = false;
> -	struct drm_connector *connector;
> -	struct drm_connector_list_iter conn_iter;
>   	unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
>   
>   	if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
>   		return;
>   
> -	drm_connector_list_iter_begin(dev, &conn_iter);
> -	drm_for_each_connector_iter(connector, &conn_iter) {
> -		const struct drm_connector_helper_funcs *funcs =
> -			connector->helper_private;
> -
> -		if (funcs && funcs->enable_hpd)
> -			funcs->enable_hpd(connector);
> -
> -		if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
> -					 DRM_CONNECTOR_POLL_DISCONNECT))
> -			poll = true;
> -	}
> -	drm_connector_list_iter_end(&conn_iter);
> +	poll = drm_kms_helper_enable_hpd(dev);
>   
>   	if (dev->mode_config.delayed_event) {
>   		/*
> @@ -810,24 +835,13 @@ EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
>   
>   static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
>   {
> -	struct drm_connector *connector;
> -	struct drm_connector_list_iter conn_iter;
> -
>   	if (!dev->mode_config.poll_enabled)
>   		return;
>   
>   	if (fini)
>   		dev->mode_config.poll_enabled = false;
>   
> -	drm_connector_list_iter_begin(dev, &conn_iter);
> -	drm_for_each_connector_iter(connector, &conn_iter) {
> -		const struct drm_connector_helper_funcs *funcs =
> -			connector->helper_private;
> -
> -		if (funcs && funcs->disable_hpd)
> -			funcs->disable_hpd(connector);
> -	}
> -	drm_connector_list_iter_end(&conn_iter);
> +	drm_kms_helper_disable_hpd(dev);
>   
>   	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
>   }

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH v3 1/2] drm/probe_helper: extract two helper functions

[Jani Nikula]

On Tue, 24 Jan 2023, Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote:
> Extract drm_kms_helper_enable_hpd() and drm_kms_helper_disable_hpd(),
> two helpers that enable and disable HPD handling on all device's
> connectors.

Thanks for separating this, it makes the other patch easier to read.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>


>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  drivers/gpu/drm/drm_probe_helper.c | 68 ++++++++++++++++++------------
>  1 file changed, 41 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> index 95aeeed33cf5..ab787d71fa66 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -222,6 +222,45 @@ drm_connector_mode_valid(struct drm_connector *connector,
>  	return ret;
>  }
>  
> +static void drm_kms_helper_disable_hpd(struct drm_device *dev)
> +{
> +	struct drm_connector *connector;
> +	struct drm_connector_list_iter conn_iter;
> +
> +	drm_connector_list_iter_begin(dev, &conn_iter);
> +	drm_for_each_connector_iter(connector, &conn_iter) {
> +		const struct drm_connector_helper_funcs *funcs =
> +			connector->helper_private;
> +
> +		if (funcs && funcs->disable_hpd)
> +			funcs->disable_hpd(connector);
> +	}
> +	drm_connector_list_iter_end(&conn_iter);
> +}
> +
> +static bool drm_kms_helper_enable_hpd(struct drm_device *dev)
> +{
> +	bool poll = false;
> +	struct drm_connector *connector;
> +	struct drm_connector_list_iter conn_iter;
> +
> +	drm_connector_list_iter_begin(dev, &conn_iter);
> +	drm_for_each_connector_iter(connector, &conn_iter) {
> +		const struct drm_connector_helper_funcs *funcs =
> +			connector->helper_private;
> +
> +		if (funcs && funcs->enable_hpd)
> +			funcs->enable_hpd(connector);
> +
> +		if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
> +					 DRM_CONNECTOR_POLL_DISCONNECT))
> +			poll = true;
> +	}
> +	drm_connector_list_iter_end(&conn_iter);
> +
> +	return poll;
> +}
> +
>  #define DRM_OUTPUT_POLL_PERIOD (10*HZ)
>  /**
>   * drm_kms_helper_poll_enable - re-enable output polling.
> @@ -241,26 +280,12 @@ drm_connector_mode_valid(struct drm_connector *connector,
>  void drm_kms_helper_poll_enable(struct drm_device *dev)
>  {
>  	bool poll = false;
> -	struct drm_connector *connector;
> -	struct drm_connector_list_iter conn_iter;
>  	unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
>  
>  	if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
>  		return;
>  
> -	drm_connector_list_iter_begin(dev, &conn_iter);
> -	drm_for_each_connector_iter(connector, &conn_iter) {
> -		const struct drm_connector_helper_funcs *funcs =
> -			connector->helper_private;
> -
> -		if (funcs && funcs->enable_hpd)
> -			funcs->enable_hpd(connector);
> -
> -		if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT |
> -					 DRM_CONNECTOR_POLL_DISCONNECT))
> -			poll = true;
> -	}
> -	drm_connector_list_iter_end(&conn_iter);
> +	poll = drm_kms_helper_enable_hpd(dev);
>  
>  	if (dev->mode_config.delayed_event) {
>  		/*
> @@ -810,24 +835,13 @@ EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
>  
>  static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
>  {
> -	struct drm_connector *connector;
> -	struct drm_connector_list_iter conn_iter;
> -
>  	if (!dev->mode_config.poll_enabled)
>  		return;
>  
>  	if (fini)
>  		dev->mode_config.poll_enabled = false;
>  
> -	drm_connector_list_iter_begin(dev, &conn_iter);
> -	drm_for_each_connector_iter(connector, &conn_iter) {
> -		const struct drm_connector_helper_funcs *funcs =
> -			connector->helper_private;
> -
> -		if (funcs && funcs->disable_hpd)
> -			funcs->disable_hpd(connector);
> -	}
> -	drm_connector_list_iter_end(&conn_iter);
> +	drm_kms_helper_disable_hpd(dev);
>  
>  	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
>  }

-- 
Jani Nikula, Intel Open Source Graphics Center

Re: [PATCH v3 2/2] drm/probe_helper: sort out poll_running vs poll_enabled

[Neil Armstrong]

Hi,

On 24/01/2023 11:45, Dmitry Baryshkov wrote:
> There are two flags attemting to guard connector polling:
> poll_enabled and poll_running. While poll_enabled semantics is clearly
> defined and fully adhered (mark that drm_kms_helper_poll_init() was
> called and not finalized by the _fini() call), the poll_running flag
> doesn't have such clearliness.
> 
> This flag is used only in drm_helper_probe_single_connector_modes() to
> guard calling of drm_kms_helper_poll_enable, it doesn't guard the
> drm_kms_helper_poll_fini(), etc. Change it to only be set if the polling
> is actually running. Tie HPD enablement to this flag.
> 
> This fixes the following warning reported after merging the HPD series:

Seems this patchset is ready to be applied to drm-misc-next, if it's ok
for everyone I'll apply it later today.

Thanks,
Neil

> 
> Hot plug detection already enabled
> WARNING: CPU: 2 PID: 9 at drivers/gpu/drm/drm_bridge.c:1257 drm_bridge_hpd_enable+0x94/0x9c [drm]
> Modules linked in: videobuf2_memops snd_soc_simple_card snd_soc_simple_card_utils fsl_imx8_ddr_perf videobuf2_common snd_soc_imx_spdif adv7511 etnaviv imx8m_ddrc imx_dcss mc cec nwl_dsi gov
> CPU: 2 PID: 9 Comm: kworker/u8:0 Not tainted 6.2.0-rc2-15208-g25b283acd578 #6
> Hardware name: NXP i.MX8MQ EVK (DT)
> Workqueue: events_unbound deferred_probe_work_func
> pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> pc : drm_bridge_hpd_enable+0x94/0x9c [drm]
> lr : drm_bridge_hpd_enable+0x94/0x9c [drm]
> sp : ffff800009ef3740
> x29: ffff800009ef3740 x28: ffff000009331f00 x27: 0000000000001000
> x26: 0000000000000020 x25: ffff800001148ed8 x24: ffff00000a8fe000
> x23: 00000000fffffffd x22: ffff000005086348 x21: ffff800001133ee0
> x20: ffff00000550d800 x19: ffff000005086288 x18: 0000000000000006
> x17: 0000000000000000 x16: ffff8000096ef008 x15: 97ffff2891004260
> x14: 2a1403e194000000 x13: 97ffff2891004260 x12: 2a1403e194000000
> x11: 7100385f29400801 x10: 0000000000000aa0 x9 : ffff800008112744
> x8 : ffff000000250b00 x7 : 0000000000000003 x6 : 0000000000000011
> x5 : 0000000000000000 x4 : ffff0000bd986a48 x3 : 0000000000000001
> x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000250000
> Call trace:
>   drm_bridge_hpd_enable+0x94/0x9c [drm]
>   drm_bridge_connector_enable_hpd+0x2c/0x3c [drm_kms_helper]
>   drm_kms_helper_poll_enable+0x94/0x10c [drm_kms_helper]
>   drm_helper_probe_single_connector_modes+0x1a8/0x510 [drm_kms_helper]
>   drm_client_modeset_probe+0x204/0x1190 [drm]
>   __drm_fb_helper_initial_config_and_unlock+0x5c/0x4a4 [drm_kms_helper]
>   drm_fb_helper_initial_config+0x54/0x6c [drm_kms_helper]
>   drm_fbdev_client_hotplug+0xd0/0x140 [drm_kms_helper]
>   drm_fbdev_generic_setup+0x90/0x154 [drm_kms_helper]
>   dcss_kms_attach+0x1c8/0x254 [imx_dcss]
>   dcss_drv_platform_probe+0x90/0xfc [imx_dcss]
>   platform_probe+0x70/0xcc
>   really_probe+0xc4/0x2e0
>   __driver_probe_device+0x80/0xf0
>   driver_probe_device+0xe0/0x164
>   __device_attach_driver+0xc0/0x13c
>   bus_for_each_drv+0x84/0xe0
>   __device_attach+0xa4/0x1a0
>   device_initial_probe+0x1c/0x30
>   bus_probe_device+0xa4/0xb0
>   deferred_probe_work_func+0x90/0xd0
>   process_one_work+0x200/0x474
>   worker_thread+0x74/0x43c
>   kthread+0xfc/0x110
>   ret_from_fork+0x10/0x20
> ---[ end trace 0000000000000000 ]---
> 
> Reported-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
> Fixes: c8268795c9a9 ("drm/probe-helper: enable and disable HPD on connectors")
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Tested-by: Chen-Yu Tsai <wenst@chromium.org>
> Acked-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
> Tested-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
> Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   drivers/gpu/drm/drm_probe_helper.c | 42 +++++++++++++++---------------
>   1 file changed, 21 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> index ab787d71fa66..8127be134c39 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -282,7 +282,8 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
>   	bool poll = false;
>   	unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
>   
> -	if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
> +	if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll ||
> +	    dev->mode_config.poll_running)
>   		return;
>   
>   	poll = drm_kms_helper_enable_hpd(dev);
> @@ -304,6 +305,8 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
>   
>   	if (poll)
>   		schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
> +
> +	dev->mode_config.poll_running = true;
>   }
>   EXPORT_SYMBOL(drm_kms_helper_poll_enable);
>   
> @@ -592,10 +595,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
>   	}
>   
>   	/* Re-enable polling in case the global poll config changed. */
> -	if (drm_kms_helper_poll != dev->mode_config.poll_running)
> -		drm_kms_helper_poll_enable(dev);
> -
> -	dev->mode_config.poll_running = drm_kms_helper_poll;
> +	drm_kms_helper_poll_enable(dev);
>   
>   	if (connector->status == connector_status_disconnected) {
>   		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n",
> @@ -735,8 +735,11 @@ static void output_poll_execute(struct work_struct *work)
>   	changed = dev->mode_config.delayed_event;
>   	dev->mode_config.delayed_event = false;
>   
> -	if (!drm_kms_helper_poll)
> +	if (!drm_kms_helper_poll && dev->mode_config.poll_running) {
> +		drm_kms_helper_disable_hpd(dev);
> +		dev->mode_config.poll_running = false;
>   		goto out;
> +	}
>   
>   	if (!mutex_trylock(&dev->mode_config.mutex)) {
>   		repoll = true;
> @@ -833,19 +836,6 @@ bool drm_kms_helper_is_poll_worker(void)
>   }
>   EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
>   
> -static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
> -{
> -	if (!dev->mode_config.poll_enabled)
> -		return;
> -
> -	if (fini)
> -		dev->mode_config.poll_enabled = false;
> -
> -	drm_kms_helper_disable_hpd(dev);
> -
> -	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
> -}
> -
>   /**
>    * drm_kms_helper_poll_disable - disable output polling
>    * @dev: drm_device
> @@ -862,7 +852,12 @@ static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
>    */
>   void drm_kms_helper_poll_disable(struct drm_device *dev)
>   {
> -	drm_kms_helper_poll_disable_fini(dev, false);
> +	if (dev->mode_config.poll_running)
> +		drm_kms_helper_disable_hpd(dev);
> +
> +	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
> +
> +	dev->mode_config.poll_running = false;
>   }
>   EXPORT_SYMBOL(drm_kms_helper_poll_disable);
>   
> @@ -900,7 +895,12 @@ EXPORT_SYMBOL(drm_kms_helper_poll_init);
>    */
>   void drm_kms_helper_poll_fini(struct drm_device *dev)
>   {
> -	drm_kms_helper_poll_disable_fini(dev, true);
> +	if (!dev->mode_config.poll_enabled)
> +		return;
> +
> +	drm_kms_helper_poll_disable(dev);
> +
> +	dev->mode_config.poll_enabled = false;
>   }
>   EXPORT_SYMBOL(drm_kms_helper_poll_fini);
>   

Re: [PATCH v3 1/2] drm/probe_helper: extract two helper functions

[Neil Armstrong]

Hi,

On Tue, 24 Jan 2023 12:45:47 +0200, Dmitry Baryshkov wrote:
> Extract drm_kms_helper_enable_hpd() and drm_kms_helper_disable_hpd(),
> two helpers that enable and disable HPD handling on all device's
> connectors.
> 
> 

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)

[1/2] drm/probe_helper: extract two helper functions
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=cbf143b282c64e59559cc8351c0b5b1ab4bbdcbe
[2/2] drm/probe_helper: sort out poll_running vs poll_enabled
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=d33a54e3991dfce88b4fc6d9c3360951c2c5660d

-- 
Neil

Re: [Intel-gfx] [PATCH v3 2/2] drm/probe_helper: sort out poll_running vs poll_enabled

[Geert Uytterhoeven]

 	Hi Dmitry,

On Tue, 24 Jan 2023, Dmitry Baryshkov wrote:
> There are two flags attemting to guard connector polling:
> poll_enabled and poll_running. While poll_enabled semantics is clearly
> defined and fully adhered (mark that drm_kms_helper_poll_init() was
> called and not finalized by the _fini() call), the poll_running flag
> doesn't have such clearliness.
>
> This flag is used only in drm_helper_probe_single_connector_modes() to
> guard calling of drm_kms_helper_poll_enable, it doesn't guard the
> drm_kms_helper_poll_fini(), etc. Change it to only be set if the polling
> is actually running. Tie HPD enablement to this flag.
>
> This fixes the following warning reported after merging the HPD series:
>
> Hot plug detection already enabled
> WARNING: CPU: 2 PID: 9 at drivers/gpu/drm/drm_bridge.c:1257 drm_bridge_hpd_enable+0x94/0x9c [drm]
> Modules linked in: videobuf2_memops snd_soc_simple_card snd_soc_simple_card_utils fsl_imx8_ddr_perf videobuf2_common snd_soc_imx_spdif adv7511 etnaviv imx8m_ddrc imx_dcss mc cec nwl_dsi gov
> CPU: 2 PID: 9 Comm: kworker/u8:0 Not tainted 6.2.0-rc2-15208-g25b283acd578 #6
> Hardware name: NXP i.MX8MQ EVK (DT)
> Workqueue: events_unbound deferred_probe_work_func
> pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> pc : drm_bridge_hpd_enable+0x94/0x9c [drm]
> lr : drm_bridge_hpd_enable+0x94/0x9c [drm]
> sp : ffff800009ef3740
> x29: ffff800009ef3740 x28: ffff000009331f00 x27: 0000000000001000
> x26: 0000000000000020 x25: ffff800001148ed8 x24: ffff00000a8fe000
> x23: 00000000fffffffd x22: ffff000005086348 x21: ffff800001133ee0
> x20: ffff00000550d800 x19: ffff000005086288 x18: 0000000000000006
> x17: 0000000000000000 x16: ffff8000096ef008 x15: 97ffff2891004260
> x14: 2a1403e194000000 x13: 97ffff2891004260 x12: 2a1403e194000000
> x11: 7100385f29400801 x10: 0000000000000aa0 x9 : ffff800008112744
> x8 : ffff000000250b00 x7 : 0000000000000003 x6 : 0000000000000011
> x5 : 0000000000000000 x4 : ffff0000bd986a48 x3 : 0000000000000001
> x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000250000
> Call trace:
> drm_bridge_hpd_enable+0x94/0x9c [drm]
> drm_bridge_connector_enable_hpd+0x2c/0x3c [drm_kms_helper]
> drm_kms_helper_poll_enable+0x94/0x10c [drm_kms_helper]
> drm_helper_probe_single_connector_modes+0x1a8/0x510 [drm_kms_helper]
> drm_client_modeset_probe+0x204/0x1190 [drm]
> __drm_fb_helper_initial_config_and_unlock+0x5c/0x4a4 [drm_kms_helper]
> drm_fb_helper_initial_config+0x54/0x6c [drm_kms_helper]
> drm_fbdev_client_hotplug+0xd0/0x140 [drm_kms_helper]
> drm_fbdev_generic_setup+0x90/0x154 [drm_kms_helper]
> dcss_kms_attach+0x1c8/0x254 [imx_dcss]
> dcss_drv_platform_probe+0x90/0xfc [imx_dcss]
> platform_probe+0x70/0xcc
> really_probe+0xc4/0x2e0
> __driver_probe_device+0x80/0xf0
> driver_probe_device+0xe0/0x164
> __device_attach_driver+0xc0/0x13c
> bus_for_each_drv+0x84/0xe0
> __device_attach+0xa4/0x1a0
> device_initial_probe+0x1c/0x30
> bus_probe_device+0xa4/0xb0
> deferred_probe_work_func+0x90/0xd0
> process_one_work+0x200/0x474
> worker_thread+0x74/0x43c
> kthread+0xfc/0x110
> ret_from_fork+0x10/0x20
> ---[ end trace 0000000000000000 ]---
>
> Reported-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
> Fixes: c8268795c9a9 ("drm/probe-helper: enable and disable HPD on connectors")
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Tested-by: Chen-Yu Tsai <wenst@chromium.org>
> Acked-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
> Tested-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
> Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Thanks for your patch!
This gets rids of the warning splats on e.g. Renesas Koelsch and
Salvator-XS, so
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

 						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
 							    -- Linus Torvalds

Re: [Intel-gfx] [PATCH v3 2/2] drm/probe_helper: sort out poll_running vs poll_enabled

[Ville Syrjälä]

On Tue, Jan 24, 2023 at 12:45:48PM +0200, Dmitry Baryshkov wrote:
> There are two flags attemting to guard connector polling:
> poll_enabled and poll_running. While poll_enabled semantics is clearly
> defined and fully adhered (mark that drm_kms_helper_poll_init() was
> called and not finalized by the _fini() call), the poll_running flag
> doesn't have such clearliness.
> 
> This flag is used only in drm_helper_probe_single_connector_modes() to
> guard calling of drm_kms_helper_poll_enable, it doesn't guard the
> drm_kms_helper_poll_fini(), etc. Change it to only be set if the polling
> is actually running. Tie HPD enablement to this flag.

This apparently broke something in i915. I suspect polling
is no longer happening correctly while the device is runtime
suspended.

https://gitlab.freedesktop.org/drm/intel/-/issues/8451

> 
> This fixes the following warning reported after merging the HPD series:
> 
> Hot plug detection already enabled
> WARNING: CPU: 2 PID: 9 at drivers/gpu/drm/drm_bridge.c:1257 drm_bridge_hpd_enable+0x94/0x9c [drm]
> Modules linked in: videobuf2_memops snd_soc_simple_card snd_soc_simple_card_utils fsl_imx8_ddr_perf videobuf2_common snd_soc_imx_spdif adv7511 etnaviv imx8m_ddrc imx_dcss mc cec nwl_dsi gov
> CPU: 2 PID: 9 Comm: kworker/u8:0 Not tainted 6.2.0-rc2-15208-g25b283acd578 #6
> Hardware name: NXP i.MX8MQ EVK (DT)
> Workqueue: events_unbound deferred_probe_work_func
> pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> pc : drm_bridge_hpd_enable+0x94/0x9c [drm]
> lr : drm_bridge_hpd_enable+0x94/0x9c [drm]
> sp : ffff800009ef3740
> x29: ffff800009ef3740 x28: ffff000009331f00 x27: 0000000000001000
> x26: 0000000000000020 x25: ffff800001148ed8 x24: ffff00000a8fe000
> x23: 00000000fffffffd x22: ffff000005086348 x21: ffff800001133ee0
> x20: ffff00000550d800 x19: ffff000005086288 x18: 0000000000000006
> x17: 0000000000000000 x16: ffff8000096ef008 x15: 97ffff2891004260
> x14: 2a1403e194000000 x13: 97ffff2891004260 x12: 2a1403e194000000
> x11: 7100385f29400801 x10: 0000000000000aa0 x9 : ffff800008112744
> x8 : ffff000000250b00 x7 : 0000000000000003 x6 : 0000000000000011
> x5 : 0000000000000000 x4 : ffff0000bd986a48 x3 : 0000000000000001
> x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000250000
> Call trace:
>  drm_bridge_hpd_enable+0x94/0x9c [drm]
>  drm_bridge_connector_enable_hpd+0x2c/0x3c [drm_kms_helper]
>  drm_kms_helper_poll_enable+0x94/0x10c [drm_kms_helper]
>  drm_helper_probe_single_connector_modes+0x1a8/0x510 [drm_kms_helper]
>  drm_client_modeset_probe+0x204/0x1190 [drm]
>  __drm_fb_helper_initial_config_and_unlock+0x5c/0x4a4 [drm_kms_helper]
>  drm_fb_helper_initial_config+0x54/0x6c [drm_kms_helper]
>  drm_fbdev_client_hotplug+0xd0/0x140 [drm_kms_helper]
>  drm_fbdev_generic_setup+0x90/0x154 [drm_kms_helper]
>  dcss_kms_attach+0x1c8/0x254 [imx_dcss]
>  dcss_drv_platform_probe+0x90/0xfc [imx_dcss]
>  platform_probe+0x70/0xcc
>  really_probe+0xc4/0x2e0
>  __driver_probe_device+0x80/0xf0
>  driver_probe_device+0xe0/0x164
>  __device_attach_driver+0xc0/0x13c
>  bus_for_each_drv+0x84/0xe0
>  __device_attach+0xa4/0x1a0
>  device_initial_probe+0x1c/0x30
>  bus_probe_device+0xa4/0xb0
>  deferred_probe_work_func+0x90/0xd0
>  process_one_work+0x200/0x474
>  worker_thread+0x74/0x43c
>  kthread+0xfc/0x110
>  ret_from_fork+0x10/0x20
> ---[ end trace 0000000000000000 ]---
> 
> Reported-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
> Fixes: c8268795c9a9 ("drm/probe-helper: enable and disable HPD on connectors")
> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Tested-by: Chen-Yu Tsai <wenst@chromium.org>
> Acked-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
> Tested-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
> Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  drivers/gpu/drm/drm_probe_helper.c | 42 +++++++++++++++---------------
>  1 file changed, 21 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> index ab787d71fa66..8127be134c39 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -282,7 +282,8 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
>  	bool poll = false;
>  	unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
>  
> -	if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
> +	if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll ||
> +	    dev->mode_config.poll_running)
>  		return;
>  
>  	poll = drm_kms_helper_enable_hpd(dev);
> @@ -304,6 +305,8 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
>  
>  	if (poll)
>  		schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
> +
> +	dev->mode_config.poll_running = true;
>  }
>  EXPORT_SYMBOL(drm_kms_helper_poll_enable);
>  
> @@ -592,10 +595,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
>  	}
>  
>  	/* Re-enable polling in case the global poll config changed. */
> -	if (drm_kms_helper_poll != dev->mode_config.poll_running)
> -		drm_kms_helper_poll_enable(dev);
> -
> -	dev->mode_config.poll_running = drm_kms_helper_poll;
> +	drm_kms_helper_poll_enable(dev);
>  
>  	if (connector->status == connector_status_disconnected) {
>  		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n",
> @@ -735,8 +735,11 @@ static void output_poll_execute(struct work_struct *work)
>  	changed = dev->mode_config.delayed_event;
>  	dev->mode_config.delayed_event = false;
>  
> -	if (!drm_kms_helper_poll)
> +	if (!drm_kms_helper_poll && dev->mode_config.poll_running) {
> +		drm_kms_helper_disable_hpd(dev);
> +		dev->mode_config.poll_running = false;
>  		goto out;
> +	}
>  
>  	if (!mutex_trylock(&dev->mode_config.mutex)) {
>  		repoll = true;
> @@ -833,19 +836,6 @@ bool drm_kms_helper_is_poll_worker(void)
>  }
>  EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
>  
> -static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
> -{
> -	if (!dev->mode_config.poll_enabled)
> -		return;
> -
> -	if (fini)
> -		dev->mode_config.poll_enabled = false;
> -
> -	drm_kms_helper_disable_hpd(dev);
> -
> -	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
> -}
> -
>  /**
>   * drm_kms_helper_poll_disable - disable output polling
>   * @dev: drm_device
> @@ -862,7 +852,12 @@ static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
>   */
>  void drm_kms_helper_poll_disable(struct drm_device *dev)
>  {
> -	drm_kms_helper_poll_disable_fini(dev, false);
> +	if (dev->mode_config.poll_running)
> +		drm_kms_helper_disable_hpd(dev);
> +
> +	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
> +
> +	dev->mode_config.poll_running = false;
>  }
>  EXPORT_SYMBOL(drm_kms_helper_poll_disable);
>  
> @@ -900,7 +895,12 @@ EXPORT_SYMBOL(drm_kms_helper_poll_init);
>   */
>  void drm_kms_helper_poll_fini(struct drm_device *dev)
>  {
> -	drm_kms_helper_poll_disable_fini(dev, true);
> +	if (!dev->mode_config.poll_enabled)
> +		return;
> +
> +	drm_kms_helper_poll_disable(dev);
> +
> +	dev->mode_config.poll_enabled = false;
>  }
>  EXPORT_SYMBOL(drm_kms_helper_poll_fini);
>  
> -- 
> 2.39.0

-- 
Ville Syrjälä
Intel