From: "Bill O'Donnell" <billodo@redhat.com>
To: Eric Sandeen <sandeen@sandeen.net>
Cc: fstests@vger.kernel.org
Subject: Re: [PATCH v3] xfs/424: test xfs_db to ensure type size taken into account with new type
Date: Mon, 17 Jul 2017 14:48:01 -0500 [thread overview]
Message-ID: <20170717194801.GA22123@redhat.com> (raw)
In-Reply-To: <e5a07a86-0081-7c7a-9807-a24c199c3abb@sandeen.net>
On Mon, Jul 17, 2017 at 02:41:04PM -0500, Eric Sandeen wrote:
>
>
> On 07/17/2017 01:53 PM, Bill O'Donnell wrote:
> > xfs_db should take type size into account when setting type.
> > If type size isn't updated whenever type is set, a false crc
> > error can occur due to the stale size. This test checks for
> > that false crc error.
> >
> > Signed-off-by: Bill O'Donnell <billodo@redhat.com>
> > ---
> > v2: Clarify commit message and test comments. Add a few more test cases.
> > v3: Add more test cases. Use _scratch_xfs_db instead of $XFS_DB_PROG to
> > accomodate fses with external logs. Remove superfluous daddr and type
> > commands.
> >
> > tests/xfs/424 | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > tests/xfs/424.out | 1 +
> > tests/xfs/group | 1 +
> > 3 files changed, 95 insertions(+)
> > create mode 100755 tests/xfs/424
> > create mode 100644 tests/xfs/424.out
> >
> > diff --git a/tests/xfs/424 b/tests/xfs/424
> > new file mode 100755
> > index 00000000..8415ecd1
> > --- /dev/null
> > +++ b/tests/xfs/424
> > @@ -0,0 +1,93 @@
> > +#! /bin/bash
> > +# FS QA Test 424
> > +#
> > +# xfs_db should take type size into account when setting type.
> > +# If type size isn't updated whenever type is set, a false crc
> > +# error can occur due to the stale size. This test checks for
> > +# that false crc error.
> > +#
> > +#-----------------------------------------------------------------------
> > +# Copyright (c) 2017 Red Hat, Inc. All Rights Reserved.
> > +#
> > +# This program is free software; you can redistribute it and/or
> > +# modify it under the terms of the GNU General Public License as
> > +# published by the Free Software Foundation.
> > +#
> > +# This program is distributed in the hope that it would be useful,
> > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > +# GNU General Public License for more details.
> > +#
> > +# You should have received a copy of the GNU General Public License
> > +# along with this program; if not, write the Free Software Foundation,
> > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> > +#-----------------------------------------------------------------------
> > +#
> > +
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + rm -f $tmp.*
> > +}
> > +
> > +_filter_dbval()
> > +{
> > + awk '{ print $4 }'
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +# Modify as appropriate
> > +_supported_os Linux
> > +_supported_fs xfs
> > +_require_scratch
> > +
> > +# real QA test starts here
> > +_scratch_unmount >> $seqres.full 2>&1
> > +
> > +# for different sector sizes, ensure no CRC errors are falsely reported.
> > +
> > +# Supported types include: agf, agfl, agi, attr3, bmapbta,
> > +# bmapbtd, bnobt, cntbt, data, dir3, dqblk, inobt, inodata,
> > +# inode, log, rtbitmap, rtsummary, sb, symlink, text, finobt.
> > +# For various sector sizes, test some types that involve type size.
> > +for SECTOR_SIZE in 512 1024 2048 4096; do
> > + $MKFS_XFS_PROG -f -s size=$SECTOR_SIZE $SCRATCH_DEV > /dev/null
> > +
> > + for TYPE in agf agi agfl sb; do
> > + DADDR=`_scratch_xfs_db -c "$TYPE" -c "daddr" | _filter_dbval`
> > + _scratch_xfs_db -c "daddr $DADDR" -c "type $TYPE"
> > + done
> > +
> > + for TYPE in inodata data log text rtbitmap rtsummary; do
> > + DADDR=`_scratch_xfs_db -c "sb" -c "addr rootino" -c "daddr" | _filter_dbval`
> > + _scratch_xfs_db -c "daddr $DADDR" -c "type $TYPE"
> > + done
>
> Ok, I don't understand this part. For each of those types, you get the address of
> the root inode, then set it to the type - including types which are... not inodes?
For this case, where addr set to rootino, the types included indeed work fine, but
"type inode" yields crc error(s). :/
It might make more sense to just leave the inodata data log text rtbitmap rtsummary
types out of the test.
fs_db> sb
xfs_db> addr rootino
xfs_db> daddr
current daddr is 96
xfs_db> type inode
Metadata corruption detected at xfs_inode block 0x60/0x200
Metadata corruption detected at xfs_inode block 0x60/0x200
. . .
>
> (sure, type text & type data can be anything, but the others are specific data
> types...)
>
> > +
> > + DADDR=`_scratch_xfs_db -c "agf" -c "addr bnoroot" -c "daddr" | _filter_dbval`
> > + _scratch_xfs_db -c "daddr $DADDR" -c "type bnobt"
> > + DADDR=`_scratch_xfs_db -c "agf" -c "addr cntroot" -c "daddr" | _filter_dbval`
> > + _scratch_xfs_db -c "daddr $DADDR" -c "type cntbt"
> > + DADDR=`_scratch_xfs_db -c "agi" -c "addr root" -c "daddr" | _filter_dbval`
> > + _scratch_xfs_db -c "daddr $DADDR" -c "type inobt"
> > + DADDR=`_scratch_xfs_db -c "agi" -c "addr free_root" -c "daddr" | _filter_dbval`
> > + _scratch_xfs_db -c "daddr $DADDR" -c "type finobt"
>
> to test the generic data & text types, you could just do:
>
> + _scratch_xfs_db -c "daddr $DADDR" -c "type text"
> + _scratch_xfs_db -c "daddr $DADDR" -c "type data"
>
> here. They don't hae CRCs anyway so if the test is truly to "test for crc errors"
> then maybe it's not needed, but it can't hurt to actually iterate through each type
> that's possible.
>
> > +done
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/xfs/424.out b/tests/xfs/424.out
> > new file mode 100644
> > index 00000000..d879a949
> > --- /dev/null
> > +++ b/tests/xfs/424.out
> > @@ -0,0 +1 @@
> > +QA output created by 424
> > diff --git a/tests/xfs/group b/tests/xfs/group
> > index ffdb0615..75c8280c 100644
> > --- a/tests/xfs/group
> > +++ b/tests/xfs/group
> > @@ -421,3 +421,4 @@
> > 421 auto quick clone dedupe
> > 422 dangerous_scrub dangerous_online_repair
> > 423 dangerous_scrub
> > +424 auto quick db
> >
next prev parent reply other threads:[~2017-07-17 19:48 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-12 18:31 [PATCH] xfs/424: test xfs_db to ensure sector size taken into account with new type Bill O'Donnell
2017-07-12 19:02 ` Eric Sandeen
2017-07-14 14:27 ` [PATCH] xfs/424: test xfs_db to ensure type " Bill O'Donnell
2017-07-14 15:42 ` Eric Sandeen
2017-07-14 16:47 ` Bill O'Donnell
2017-07-14 19:01 ` Eric Sandeen
2017-07-14 19:11 ` Bill O'Donnell
2017-07-14 19:58 ` Bill O'Donnell
2017-07-14 21:43 ` Eric Sandeen
2017-07-14 17:39 ` Darrick J. Wong
2017-07-17 18:53 ` [PATCH v3] " Bill O'Donnell
2017-07-17 19:41 ` Eric Sandeen
2017-07-17 19:48 ` Bill O'Donnell [this message]
2017-07-17 20:23 ` Eric Sandeen
2017-07-17 22:09 ` [PATCH v4] " Bill O'Donnell
2017-07-20 4:08 ` Eryu Guan
2017-07-21 14:53 ` [PATCH v5] " Bill O'Donnell
2017-07-24 11:54 ` Eryu Guan
2017-07-24 15:00 ` Bill O'Donnell
2017-07-24 15:07 ` [PATCH v6] " Bill O'Donnell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170717194801.GA22123@redhat.com \
--to=billodo@redhat.com \
--cc=fstests@vger.kernel.org \
--cc=sandeen@sandeen.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox