From: "zhangyi (F)" <yi.zhang@huawei.com>
To: eguan@redhat.com, fstests@vger.kernel.org
Cc: linux-unionfs@vger.kernel.org, miklos@szeredi.hu,
amir73il@gmail.com, yi.zhang@huawei.com, miaoxie@huawei.com,
yangerkun@huawei.com
Subject: [xfstests PATCH v2 2/5] overlay: hook filesystem check helper
Date: Wed, 31 Jan 2018 18:27:56 +0800 [thread overview]
Message-ID: <20180131102759.40997-3-yi.zhang@huawei.com> (raw)
In-Reply-To: <20180131102759.40997-1-yi.zhang@huawei.com>
Hook filesystem check helper to _check_test_fs and _check_scratch_fs for
constants underlying dirs of overlay filesystem, and introduce scratch
check helpers for optionally lower/upper/work dirs. These helpers works
only if fsck.overlay exists.
[ _check_test_fs/_check_scratch_fs part picked from Amir's patch, thanks ]
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
---
common/overlay | 128 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
common/rc | 4 +-
2 files changed, 130 insertions(+), 2 deletions(-)
diff --git a/common/overlay b/common/overlay
index d741a7e..0e45ddd 100644
--- a/common/overlay
+++ b/common/overlay
@@ -152,6 +152,14 @@ _require_scratch_overlay_feature()
_scratch_unmount
}
+# Require the same scratch device as _require_scratch, but do not check
+# the constants OVL_LOWER/OVL_UPPER/OVL_WORK dirs, should use together
+# with optionally lower/upper/work dirs and do check explicitly after test.
+_require_overlay_scratch_dirs()
+{
+ _require_scratch_nocheck
+}
+
# Helper function to check underlying dirs of overlay filesystem
_overlay_fsck_dirs()
{
@@ -165,3 +173,123 @@ _overlay_fsck_dirs()
$FSCK_OVERLAY_PROG -o lowerdir=$lowerdir -o upperdir=$upperdir \
-o workdir=$workdir $*
}
+
+_overlay_check_dirs()
+{
+ local lowerdir=$1
+ local upperdir=$2
+ local workdir=$3
+ local err=0
+
+ _overlay_fsck_dirs $* $FSCK_OPTIONS >>$tmp.fsck 2>&1
+ if [ $? -ne 0 ]; then
+ _log_err "_overlay_check_fs: overlayfs on $lowerdir,$upperdir,$workdir is inconsistent"
+
+ echo "*** fsck.overlay output ***" >>$seqres.full
+ cat $tmp.fsck >>$seqres.full
+ echo "*** end fsck.overlay output" >>$seqres.full
+
+ echo "*** mount output ***" >>$seqres.full
+ _mount >>$seqres.full
+ echo "*** end mount output" >>$seqres.full
+
+ err=1
+ fi
+ rm -f $tmp.fsck
+
+ return $err
+}
+
+# Check the same mnt/dev of _check_overlay_scratch_fs, but check optionally
+# lower/upper/work dirs of overlay filesystem, should use together with
+# _require_overlay_scratch_dirs
+_overlay_check_scratch_dirs()
+{
+ local lowerdir=$1
+ local upperdir=$2
+ local workdir=$3
+ shift 3
+
+ # Need to umount overlay for scratch dir check
+ local ovl_mounted=`_is_mounted $SCRATCH_MNT`
+ [ -z "$ovl_mounted" ] || $UMOUNT_PROG $SCRATCH_MNT
+
+ # Check dirs with extra overlay options
+ _overlay_check_dirs $lowerdir $upperdir $workdir $*
+ local ret=$?
+
+ if [ $ret -eq 0 -a -n "$ovl_mounted" ]; then
+ # overlay was mounted, remount with extra mount options
+ _overlay_scratch_mount_dirs $lowerdir $upperdir \
+ $workdir $*
+ ret=$?
+ fi
+
+ return $ret
+}
+
+_overlay_check_fs()
+{
+ # Aligns arguments for _overlay_base_mount
+ local ovl_mnt=$1
+ shift 1
+
+ local base_dev=$3
+ local base_mnt=$4
+
+ [ "$FSTYP" = overlay ] || return 0
+
+ # Base fs needs to be mounted to check overlay dirs
+ local base_fstype=""
+ local ovl_mounted=""
+
+ [ -z "$base_dev" ] || \
+ base_fstype=`_fs_type $base_dev`
+
+ # If base fstype is set, base fs is mounted, mount otherwise
+ if [ -z "$base_fstype" ]; then
+ _overlay_base_mount $*
+ else
+ # Need to umount overlay for dir check
+ ovl_mounted=`_is_mounted $ovl_mnt`
+ [ -z "$ovl_mounted" ] || $UMOUNT_PROG $ovl_mnt
+ fi
+
+ _overlay_check_dirs $base_mnt/$OVL_LOWER $base_mnt/$OVL_UPPER \
+ $base_mnt/$OVL_WORK
+ local ret=$?
+
+ if [ -z "$base_fstype" ]; then
+ _overlay_base_unmount "$base_dev" "$base_mnt"
+ elif [ $ret -eq 0 -a -n "$ovl_mounted" ]; then
+ # overlay was mounted, remount besides extra mount options
+ _overlay_mount $base_mnt $ovl_mnt
+ ret=$?
+ fi
+
+ if [ $ret != 0 ]; then
+ status=1
+ if [ "$iam" != "check" ]; then
+ exit 1
+ fi
+ return 1
+ fi
+
+ return 0
+}
+
+_check_overlay_test_fs()
+{
+ _overlay_check_fs "$TEST_DIR" \
+ OVL_BASE_TEST_DEV OVL_BASE_TEST_DIR \
+ "$OVL_BASE_TEST_DEV" "$OVL_BASE_TEST_DIR" \
+ $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS
+}
+
+_check_overlay_scratch_fs()
+{
+ _overlay_check_fs "$SCRATCH_MNT" \
+ OVL_BASE_SCRATCH_DEV OVL_BASE_SCRATCH_MNT \
+ "$OVL_BASE_SCRATCH_DEV" "$OVL_BASE_SCRATCH_MNT" \
+ $OVL_BASE_MOUNT_OPTIONS $SELINUX_MOUNT_OPTIONS
+}
diff --git a/common/rc b/common/rc
index 3351f00..7b84bb5 100644
--- a/common/rc
+++ b/common/rc
@@ -2585,7 +2585,7 @@ _check_test_fs()
# no way to check consistency for GlusterFS
;;
overlay)
- # no way to check consistency for overlay
+ _check_overlay_test_fs
;;
pvfs2)
;;
@@ -2643,7 +2643,7 @@ _check_scratch_fs()
# no way to check consistency for GlusterFS
;;
overlay)
- # no way to check consistency for overlay
+ _check_overlay_scratch_fs
;;
pvfs2)
;;
--
2.5.0
next prev parent reply other threads:[~2018-01-31 10:19 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-31 10:27 [xfstests PATCH v2 0/5] overlay: add overlay filesystem dirs check zhangyi (F)
2018-01-31 10:27 ` [xfstests PATCH v2 1/5] common/rc: improve mounted check helper zhangyi (F)
2018-02-06 15:21 ` Eryu Guan
2018-01-31 10:27 ` zhangyi (F) [this message]
2018-02-06 15:53 ` [xfstests PATCH v2 2/5] overlay: hook filesystem " Eryu Guan
2018-02-06 20:34 ` Amir Goldstein
2018-02-07 4:13 ` Eryu Guan
2018-02-08 12:46 ` zhangyi (F)
2018-01-31 10:27 ` [xfstests PATCH v2 3/5] overlay/003: fix fs check failure zhangyi (F)
2018-01-31 10:27 ` [xfstests PATCH v2 4/5] overlay: skip check for tests finished with corrupt filesystem zhangyi (F)
2018-01-31 10:27 ` [xfstests PATCH v2 5/5] overlay: correct scratch dirs check zhangyi (F)
2018-01-31 15:50 ` Amir Goldstein
2018-02-06 16:11 ` Eryu Guan
2018-02-06 16:14 ` [xfstests PATCH v2 0/5] overlay: add overlay filesystem " Eryu Guan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180131102759.40997-3-yi.zhang@huawei.com \
--to=yi.zhang@huawei.com \
--cc=amir73il@gmail.com \
--cc=eguan@redhat.com \
--cc=fstests@vger.kernel.org \
--cc=linux-unionfs@vger.kernel.org \
--cc=miaoxie@huawei.com \
--cc=miklos@szeredi.hu \
--cc=yangerkun@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox