From: Ira Weiny <ira.weiny@intel.com>
To: Xiao Yang <yangx.jy@cn.fujitsu.com>
Cc: fstests@vger.kernel.org, darrick.wong@oracle.com
Subject: Re: [PATCH v3 6/6] xfs/260: Move and update xfs/260
Date: Wed, 1 Jul 2020 09:07:03 -0700 [thread overview]
Message-ID: <20200701160702.GA82575@iweiny-DESK2.sc.intel.com> (raw)
In-Reply-To: <5EFBDF8E.6080007@cn.fujitsu.com>
On Wed, Jul 01, 2020 at 08:57:50AM +0800, Xiao Yang wrote:
> On 2020/7/1 4:41, Ira Weiny wrote:
> > On Tue, Jun 30, 2020 at 09:59:51PM +0800, Xiao Yang wrote:
> > > 1) Both ext4 and xfs have supported inode DAX flag so move it to generic.
> > > 2) Modifying inode DAX flag on flies does not take effect immediately so
> > > make files inherit the DAX flag of parent directory.
> > > 3) Setting/clearing inode DAX flag have no chance to change S_DAX flag if
> > > mount with dax option so remove the related subtest.
> > >
> > > Signed-off-by: Xiao Yang<yangx.jy@cn.fujitsu.com>
> > > Signed-off-by: Ira Weiny<ira.weiny@intel.com>
> > > ---
> > > tests/{xfs/260 => generic/603} | 63 +++++++++++++++++-----------------
> > > tests/generic/603.out | 2 ++
> > > tests/generic/group | 1 +
> > > tests/xfs/260.out | 2 --
> > > tests/xfs/group | 1 -
> > > 5 files changed, 34 insertions(+), 35 deletions(-)
> > > rename tests/{xfs/260 => generic/603} (60%)
> > > create mode 100644 tests/generic/603.out
> > > delete mode 100644 tests/xfs/260.out
> > >
> > > diff --git a/tests/xfs/260 b/tests/generic/603
> > > similarity index 60%
> > > rename from tests/xfs/260
> > > rename to tests/generic/603
> > > index 7afc20f1..f40048f9 100755
> > > --- a/tests/xfs/260
> > > +++ b/tests/generic/603
> > > @@ -2,7 +2,7 @@
> > > # SPDX-License-Identifier: GPL-2.0
> > > # Copyright (c) 2017 Red Hat Inc. All Rights Reserved.
> > > #
> > > -# FS QA Test 260
> > > +# FS QA Test 603
> > > #
> > > # Test per-inode DAX flag by mmap direct/buffered IO.
> > > #
> > > @@ -28,7 +28,7 @@ _cleanup()
> > > # remove previous $seqres.full before test
> > > rm -f $seqres.full
> > >
> > > -_supported_fs xfs
> > > +_supported_fs generic
> > > _supported_os Linux
> > > _require_scratch_dax_mountopt "dax"
> > > _require_test_program "feature"
> > > @@ -36,68 +36,72 @@ _require_test_program "t_mmap_dio"
> > > _require_scratch_dax_iflag
> > > _require_xfs_io_command "falloc"
> > >
> > > -prep_files()
> > > +SRC_DIR=$SCRATCH_MNT/src
> > > +SRC_FILE=$SRC_DIR/tf_s
> > > +DST_DIR=$SCRATCH_MNT/dst
> > > +DST_FILE=$DST_DIR/tf_d
> > > +
> > > +prep_directories()
> > > {
> > > - rm -f $SCRATCH_MNT/tf_{s,d}
> > > + mkdir -p $SRC_DIR $DST_DIR
> > > +}
> > >
> > > +prep_files()
> > > +{
> > > + rm -f $SRC_FILE $DST_FILE
> > > $XFS_IO_PROG -f -c "falloc 0 $tsize" \
> > > - $SCRATCH_MNT/tf_{s,d}>> $seqres.full 2>&1
> > > + $SRC_FILE $DST_FILE>> $seqres.full 2>&1
> > > }
> > >
> > > t_both_dax()
> > > {
> > > + $XFS_IO_PROG -c "chattr +x" $SRC_DIR $DST_DIR
> > > prep_files
> > > - $XFS_IO_PROG -c "chattr +x" $SCRATCH_MNT/tf_{s,d}
> > > # with O_DIRECT first
> > > - $here/src/t_mmap_dio $SCRATCH_MNT/tf_{s,d} $1 "dio both dax"
> > > + $here/src/t_mmap_dio $SRC_FILE $DST_FILE \
> > > + $1 "dio both dax"
> > >
> > > prep_files
> > > - $XFS_IO_PROG -c "chattr +x" $SCRATCH_MNT/tf_{s,d}
> > > # again with buffered IO
> > > - $here/src/t_mmap_dio -b $SCRATCH_MNT/tf_{s,d} \
> > > + $here/src/t_mmap_dio -b $SRC_FILE $DST_FILE \
> > > $1 "buffered both dax"
> > > }
> > >
> > > t_nondax_to_dax()
> > > {
> > > + $XFS_IO_PROG -c "chattr -x" $SRC_DIR
> > > + $XFS_IO_PROG -c "chattr +x" $DST_DIR
> > > prep_files
> > > - $XFS_IO_PROG -c "chattr -x" $SCRATCH_MNT/tf_s
> > > - $XFS_IO_PROG -c "chattr +x" $SCRATCH_MNT/tf_d
> > > - $here/src/t_mmap_dio $SCRATCH_MNT/tf_{s,d} \
> > > + $here/src/t_mmap_dio $SRC_FILE $DST_FILE \
> > > $1 "dio nondax to dax"
> > >
> > > prep_files
> > > - $XFS_IO_PROG -c "chattr -x" $SCRATCH_MNT/tf_s
> > > - $XFS_IO_PROG -c "chattr +x" $SCRATCH_MNT/tf_d
> > > - $here/src/t_mmap_dio -b $SCRATCH_MNT/tf_{s,d} \
> > > + $here/src/t_mmap_dio -b $SRC_FILE $DST_FILE \
> > > $1 "buffered nondax to dax"
> > > }
> > >
> > > t_dax_to_nondax()
> > > {
> > > + $XFS_IO_PROG -c "chattr +x" $SRC_DIR
> > > + $XFS_IO_PROG -c "chattr -x" $DST_DIR
> > > prep_files
> > > - $XFS_IO_PROG -c "chattr +x" $SCRATCH_MNT/tf_s
> > > - $XFS_IO_PROG -c "chattr -x" $SCRATCH_MNT/tf_d
> > > - $here/src/t_mmap_dio $SCRATCH_MNT/tf_{s,d} \
> > > + $here/src/t_mmap_dio $SRC_FILE $DST_FILE \
> > > $1 "dio dax to nondax"
> > >
> > > prep_files
> > > - $XFS_IO_PROG -c "chattr +x" $SCRATCH_MNT/tf_s
> > > - $XFS_IO_PROG -c "chattr -x" $SCRATCH_MNT/tf_d
> > > - $here/src/t_mmap_dio -b $SCRATCH_MNT/tf_{s,d} \
> > > + $here/src/t_mmap_dio -b $SRC_FILE $DST_FILE \
> > > $1 "buffered dax to nondax"
> > > }
> > >
> > > t_both_nondax()
> > > {
> > > + $XFS_IO_PROG -c "chattr -x" $SRC_DIR $DST_DIR
> > > prep_files
> > > - $XFS_IO_PROG -c "chattr -x" $SCRATCH_MNT/tf_{s,d}
> > > - $here/src/t_mmap_dio $SCRATCH_MNT/tf_{s,d} \
> > > + $here/src/t_mmap_dio $SRC_FILE $DST_FILE \
> > > $1 "dio both nondax"
> > >
> > > prep_files
> > > - $XFS_IO_PROG -c "chattr -x" $SCRATCH_MNT/tf_{s,d}
> > > - $here/src/t_mmap_dio -b $SCRATCH_MNT/tf_{s,d} \
> > > + $here/src/t_mmap_dio -b $SRC_FILE $DST_FILE \
> > > $1 "buffered both nondax"
> > > }
> > >
> > > @@ -112,6 +116,7 @@ t_dax_flag_mmap_dio()
> > >
> > > do_tests()
> > > {
> > > + prep_directories
> > > # less than page size
> > > t_dax_flag_mmap_dio 1024
> > > # page size
> > > @@ -124,15 +129,9 @@ do_tests()
> > > # make xfs aligned for PMD fault testing
> > > _scratch_mkfs_geom $(_get_hugepagesize) 1>> $seqres.full 2>&1
> > >
> > > -# mount with dax option
> > > -_scratch_mount "-o dax"
> > > -
> > > tsize=$((128 * 1024 * 1024))
> > >
> > > -do_tests
> > > -_scratch_unmount
> > > -
> > > -# mount again without dax option
> > > +# mount without dax option
> > NIT: we could mention that this defaults to the dax=inode state for the FS
> > now... but I don't think it is absolutely necessary.
> Hi Ira,
>
> I am ok to add the nit. :-)
> In addition, I actaully simplify the code your provided so do you have any
> comment on this change.?
No I think what you have here is good. Thanks...
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
>
> Best Regards,
> Xiao Yang
> > Reviewed-by: Ira Weiny<ira.weiny@intel.com>
> >
> >
> > > export MOUNT_OPTIONS=""
> > > _scratch_mount
> > > do_tests
> > > diff --git a/tests/generic/603.out b/tests/generic/603.out
> > > new file mode 100644
> > > index 00000000..6810da89
> > > --- /dev/null
> > > +++ b/tests/generic/603.out
> > > @@ -0,0 +1,2 @@
> > > +QA output created by 603
> > > +Silence is golden
> > > diff --git a/tests/generic/group b/tests/generic/group
> > > index d9ab9a31..1d0d5606 100644
> > > --- a/tests/generic/group
> > > +++ b/tests/generic/group
> > > @@ -605,3 +605,4 @@
> > > 600 auto quick quota
> > > 601 auto quick quota
> > > 602 auto quick encrypt
> > > +603 auto attr quick dax
> > > diff --git a/tests/xfs/260.out b/tests/xfs/260.out
> > > deleted file mode 100644
> > > index 18ca517c..00000000
> > > --- a/tests/xfs/260.out
> > > +++ /dev/null
> > > @@ -1,2 +0,0 @@
> > > -QA output created by 260
> > > -Silence is golden
> > > diff --git a/tests/xfs/group b/tests/xfs/group
> > > index daf54add..71c30898 100644
> > > --- a/tests/xfs/group
> > > +++ b/tests/xfs/group
> > > @@ -257,7 +257,6 @@
> > > 257 auto quick clone
> > > 258 auto quick clone
> > > 259 auto quick
> > > -260 auto attr quick dax
> > > 261 auto quick quota
> > > 262 dangerous_fuzzers dangerous_scrub dangerous_online_repair
> > > 263 auto quick quota
> > > --
> > > 2.21.0
> > >
> > >
> > >
> >
> > .
> >
>
>
>
next prev parent reply other threads:[~2020-07-01 16:07 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-30 13:59 [PATCH v3 0/6] Make fstests support new behavior of DAX Xiao Yang
2020-06-30 13:59 ` [PATCH v3 1/6] common/rc: Introduce new helpers for DAX mount options and FS_XFLAG_DAX Xiao Yang
2020-06-30 13:59 ` [PATCH v3 2/6] fstests: Use _require_scratch_dax_mountopt() and _require_scratch_dax_iflag() Xiao Yang
2020-06-30 13:59 ` [PATCH v3 3/6] common/rc: Remove unused _require_scratch_dax() Xiao Yang
2020-06-30 13:59 ` [PATCH v3 4/6] generic/223: Don't clear all mkfs options for _scratch_mkfs_geom() roughly Xiao Yang
2020-06-30 13:59 ` [PATCH v3 5/6] generic/413, xfs/260: Improve format operation for PMD fault testing Xiao Yang
2020-06-30 13:59 ` [PATCH v3 6/6] xfs/260: Move and update xfs/260 Xiao Yang
2020-06-30 20:41 ` Ira Weiny
2020-07-01 0:57 ` Xiao Yang
2020-07-01 16:07 ` Ira Weiny [this message]
2020-06-30 20:34 ` [PATCH v3 0/6] Make fstests support new behavior of DAX Ira Weiny
2020-07-01 1:10 ` Xiao Yang
2020-07-01 16:07 ` Ira Weiny
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200701160702.GA82575@iweiny-DESK2.sc.intel.com \
--to=ira.weiny@intel.com \
--cc=darrick.wong@oracle.com \
--cc=fstests@vger.kernel.org \
--cc=yangx.jy@cn.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox