From: Xiao Yang <yangx.jy@cn.fujitsu.com>
To: Ira Weiny <ira.weiny@intel.com>
Cc: <fstests@vger.kernel.org>, <darrick.wong@oracle.com>
Subject: Re: [PATCH v3 6/6] xfs/260: Move and update xfs/260
Date: Wed, 1 Jul 2020 08:57:50 +0800 [thread overview]
Message-ID: <5EFBDF8E.6080007@cn.fujitsu.com> (raw)
In-Reply-To: <20200630204153.GW2617015@iweiny-DESK2.sc.intel.com>
On 2020/7/1 4:41, Ira Weiny wrote:
> On Tue, Jun 30, 2020 at 09:59:51PM +0800, Xiao Yang wrote:
>> 1) Both ext4 and xfs have supported inode DAX flag so move it to generic.
>> 2) Modifying inode DAX flag on flies does not take effect immediately so
>> make files inherit the DAX flag of parent directory.
>> 3) Setting/clearing inode DAX flag have no chance to change S_DAX flag if
>> mount with dax option so remove the related subtest.
>>
>> Signed-off-by: Xiao Yang<yangx.jy@cn.fujitsu.com>
>> Signed-off-by: Ira Weiny<ira.weiny@intel.com>
>> ---
>> tests/{xfs/260 => generic/603} | 63 +++++++++++++++++-----------------
>> tests/generic/603.out | 2 ++
>> tests/generic/group | 1 +
>> tests/xfs/260.out | 2 --
>> tests/xfs/group | 1 -
>> 5 files changed, 34 insertions(+), 35 deletions(-)
>> rename tests/{xfs/260 => generic/603} (60%)
>> create mode 100644 tests/generic/603.out
>> delete mode 100644 tests/xfs/260.out
>>
>> diff --git a/tests/xfs/260 b/tests/generic/603
>> similarity index 60%
>> rename from tests/xfs/260
>> rename to tests/generic/603
>> index 7afc20f1..f40048f9 100755
>> --- a/tests/xfs/260
>> +++ b/tests/generic/603
>> @@ -2,7 +2,7 @@
>> # SPDX-License-Identifier: GPL-2.0
>> # Copyright (c) 2017 Red Hat Inc. All Rights Reserved.
>> #
>> -# FS QA Test 260
>> +# FS QA Test 603
>> #
>> # Test per-inode DAX flag by mmap direct/buffered IO.
>> #
>> @@ -28,7 +28,7 @@ _cleanup()
>> # remove previous $seqres.full before test
>> rm -f $seqres.full
>>
>> -_supported_fs xfs
>> +_supported_fs generic
>> _supported_os Linux
>> _require_scratch_dax_mountopt "dax"
>> _require_test_program "feature"
>> @@ -36,68 +36,72 @@ _require_test_program "t_mmap_dio"
>> _require_scratch_dax_iflag
>> _require_xfs_io_command "falloc"
>>
>> -prep_files()
>> +SRC_DIR=$SCRATCH_MNT/src
>> +SRC_FILE=$SRC_DIR/tf_s
>> +DST_DIR=$SCRATCH_MNT/dst
>> +DST_FILE=$DST_DIR/tf_d
>> +
>> +prep_directories()
>> {
>> - rm -f $SCRATCH_MNT/tf_{s,d}
>> + mkdir -p $SRC_DIR $DST_DIR
>> +}
>>
>> +prep_files()
>> +{
>> + rm -f $SRC_FILE $DST_FILE
>> $XFS_IO_PROG -f -c "falloc 0 $tsize" \
>> - $SCRATCH_MNT/tf_{s,d}>> $seqres.full 2>&1
>> + $SRC_FILE $DST_FILE>> $seqres.full 2>&1
>> }
>>
>> t_both_dax()
>> {
>> + $XFS_IO_PROG -c "chattr +x" $SRC_DIR $DST_DIR
>> prep_files
>> - $XFS_IO_PROG -c "chattr +x" $SCRATCH_MNT/tf_{s,d}
>> # with O_DIRECT first
>> - $here/src/t_mmap_dio $SCRATCH_MNT/tf_{s,d} $1 "dio both dax"
>> + $here/src/t_mmap_dio $SRC_FILE $DST_FILE \
>> + $1 "dio both dax"
>>
>> prep_files
>> - $XFS_IO_PROG -c "chattr +x" $SCRATCH_MNT/tf_{s,d}
>> # again with buffered IO
>> - $here/src/t_mmap_dio -b $SCRATCH_MNT/tf_{s,d} \
>> + $here/src/t_mmap_dio -b $SRC_FILE $DST_FILE \
>> $1 "buffered both dax"
>> }
>>
>> t_nondax_to_dax()
>> {
>> + $XFS_IO_PROG -c "chattr -x" $SRC_DIR
>> + $XFS_IO_PROG -c "chattr +x" $DST_DIR
>> prep_files
>> - $XFS_IO_PROG -c "chattr -x" $SCRATCH_MNT/tf_s
>> - $XFS_IO_PROG -c "chattr +x" $SCRATCH_MNT/tf_d
>> - $here/src/t_mmap_dio $SCRATCH_MNT/tf_{s,d} \
>> + $here/src/t_mmap_dio $SRC_FILE $DST_FILE \
>> $1 "dio nondax to dax"
>>
>> prep_files
>> - $XFS_IO_PROG -c "chattr -x" $SCRATCH_MNT/tf_s
>> - $XFS_IO_PROG -c "chattr +x" $SCRATCH_MNT/tf_d
>> - $here/src/t_mmap_dio -b $SCRATCH_MNT/tf_{s,d} \
>> + $here/src/t_mmap_dio -b $SRC_FILE $DST_FILE \
>> $1 "buffered nondax to dax"
>> }
>>
>> t_dax_to_nondax()
>> {
>> + $XFS_IO_PROG -c "chattr +x" $SRC_DIR
>> + $XFS_IO_PROG -c "chattr -x" $DST_DIR
>> prep_files
>> - $XFS_IO_PROG -c "chattr +x" $SCRATCH_MNT/tf_s
>> - $XFS_IO_PROG -c "chattr -x" $SCRATCH_MNT/tf_d
>> - $here/src/t_mmap_dio $SCRATCH_MNT/tf_{s,d} \
>> + $here/src/t_mmap_dio $SRC_FILE $DST_FILE \
>> $1 "dio dax to nondax"
>>
>> prep_files
>> - $XFS_IO_PROG -c "chattr +x" $SCRATCH_MNT/tf_s
>> - $XFS_IO_PROG -c "chattr -x" $SCRATCH_MNT/tf_d
>> - $here/src/t_mmap_dio -b $SCRATCH_MNT/tf_{s,d} \
>> + $here/src/t_mmap_dio -b $SRC_FILE $DST_FILE \
>> $1 "buffered dax to nondax"
>> }
>>
>> t_both_nondax()
>> {
>> + $XFS_IO_PROG -c "chattr -x" $SRC_DIR $DST_DIR
>> prep_files
>> - $XFS_IO_PROG -c "chattr -x" $SCRATCH_MNT/tf_{s,d}
>> - $here/src/t_mmap_dio $SCRATCH_MNT/tf_{s,d} \
>> + $here/src/t_mmap_dio $SRC_FILE $DST_FILE \
>> $1 "dio both nondax"
>>
>> prep_files
>> - $XFS_IO_PROG -c "chattr -x" $SCRATCH_MNT/tf_{s,d}
>> - $here/src/t_mmap_dio -b $SCRATCH_MNT/tf_{s,d} \
>> + $here/src/t_mmap_dio -b $SRC_FILE $DST_FILE \
>> $1 "buffered both nondax"
>> }
>>
>> @@ -112,6 +116,7 @@ t_dax_flag_mmap_dio()
>>
>> do_tests()
>> {
>> + prep_directories
>> # less than page size
>> t_dax_flag_mmap_dio 1024
>> # page size
>> @@ -124,15 +129,9 @@ do_tests()
>> # make xfs aligned for PMD fault testing
>> _scratch_mkfs_geom $(_get_hugepagesize) 1>> $seqres.full 2>&1
>>
>> -# mount with dax option
>> -_scratch_mount "-o dax"
>> -
>> tsize=$((128 * 1024 * 1024))
>>
>> -do_tests
>> -_scratch_unmount
>> -
>> -# mount again without dax option
>> +# mount without dax option
> NIT: we could mention that this defaults to the dax=inode state for the FS
> now... but I don't think it is absolutely necessary.
Hi Ira,
I am ok to add the nit. :-)
In addition, I actaully simplify the code your provided so do you have
any comment on this change.?
Best Regards,
Xiao Yang
> Reviewed-by: Ira Weiny<ira.weiny@intel.com>
>
>
>> export MOUNT_OPTIONS=""
>> _scratch_mount
>> do_tests
>> diff --git a/tests/generic/603.out b/tests/generic/603.out
>> new file mode 100644
>> index 00000000..6810da89
>> --- /dev/null
>> +++ b/tests/generic/603.out
>> @@ -0,0 +1,2 @@
>> +QA output created by 603
>> +Silence is golden
>> diff --git a/tests/generic/group b/tests/generic/group
>> index d9ab9a31..1d0d5606 100644
>> --- a/tests/generic/group
>> +++ b/tests/generic/group
>> @@ -605,3 +605,4 @@
>> 600 auto quick quota
>> 601 auto quick quota
>> 602 auto quick encrypt
>> +603 auto attr quick dax
>> diff --git a/tests/xfs/260.out b/tests/xfs/260.out
>> deleted file mode 100644
>> index 18ca517c..00000000
>> --- a/tests/xfs/260.out
>> +++ /dev/null
>> @@ -1,2 +0,0 @@
>> -QA output created by 260
>> -Silence is golden
>> diff --git a/tests/xfs/group b/tests/xfs/group
>> index daf54add..71c30898 100644
>> --- a/tests/xfs/group
>> +++ b/tests/xfs/group
>> @@ -257,7 +257,6 @@
>> 257 auto quick clone
>> 258 auto quick clone
>> 259 auto quick
>> -260 auto attr quick dax
>> 261 auto quick quota
>> 262 dangerous_fuzzers dangerous_scrub dangerous_online_repair
>> 263 auto quick quota
>> --
>> 2.21.0
>>
>>
>>
>
> .
>
next prev parent reply other threads:[~2020-07-01 0:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-30 13:59 [PATCH v3 0/6] Make fstests support new behavior of DAX Xiao Yang
2020-06-30 13:59 ` [PATCH v3 1/6] common/rc: Introduce new helpers for DAX mount options and FS_XFLAG_DAX Xiao Yang
2020-06-30 13:59 ` [PATCH v3 2/6] fstests: Use _require_scratch_dax_mountopt() and _require_scratch_dax_iflag() Xiao Yang
2020-06-30 13:59 ` [PATCH v3 3/6] common/rc: Remove unused _require_scratch_dax() Xiao Yang
2020-06-30 13:59 ` [PATCH v3 4/6] generic/223: Don't clear all mkfs options for _scratch_mkfs_geom() roughly Xiao Yang
2020-06-30 13:59 ` [PATCH v3 5/6] generic/413, xfs/260: Improve format operation for PMD fault testing Xiao Yang
2020-06-30 13:59 ` [PATCH v3 6/6] xfs/260: Move and update xfs/260 Xiao Yang
2020-06-30 20:41 ` Ira Weiny
2020-07-01 0:57 ` Xiao Yang [this message]
2020-07-01 16:07 ` Ira Weiny
2020-06-30 20:34 ` [PATCH v3 0/6] Make fstests support new behavior of DAX Ira Weiny
2020-07-01 1:10 ` Xiao Yang
2020-07-01 16:07 ` Ira Weiny
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5EFBDF8E.6080007@cn.fujitsu.com \
--to=yangx.jy@cn.fujitsu.com \
--cc=darrick.wong@oracle.com \
--cc=fstests@vger.kernel.org \
--cc=ira.weiny@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox