[PATCH 1/8] xfstests: Add Log Attribute Replay test

[Dave Chinner <david@fromorbit.com>]

From: Allison Henderson <allison.henderson@oracle.com>

This patch adds tests to exercise the log attribute error
inject and log replay. These tests aim to cover cases where attributes
are added, removed, and overwritten in each format (shortform, leaf,
node). Error inject is used to replay these operations from the log.

dchinner: sanitise md5sum input to just attr values.
dchinner: correct md5sums.
dchinner: ensure replace tests use different values so recovery can
          determine the replace was replayed correctly.
dchinner: don't remove corpse in _cleanup - scratch devices don't
	  require cleanup, and if the test fails we want to leave
	  the broken state for post-mortem analysis.
dchinner: only run on v5 filesystems.

Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
---
 tests/xfs/600     | 179 +++++++++++++++++++++++++++++++++++++++++++
 tests/xfs/600.out | 188 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 367 insertions(+)
 create mode 100755 tests/xfs/600
 create mode 100644 tests/xfs/600.out

diff --git a/tests/xfs/600 b/tests/xfs/600
new file mode 100755
index 00000000..0ff41e13
--- /dev/null
+++ b/tests/xfs/600
@@ -0,0 +1,179 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2022, Oracle and/or its affiliates.  All Rights Reserved.
+#
+# FS QA Test 600
+#
+# Log attribute replay test
+#
+. ./common/preamble
+_begin_fstest auto quick attr
+
+# get standard environment, filters and checks
+. ./common/filter
+. ./common/attr
+. ./common/inject
+
+_cleanup()
+{
+	rm -rf $tmp.*
+	test -w /sys/fs/xfs/debug/larp && \
+		echo 0 > /sys/fs/xfs/debug/larp
+}
+
+test_attr_replay()
+{
+	testfile=$testdir/$1
+	attr_name=$2
+	attr_value=$3
+	flag=$4
+	error_tag=$5
+
+	# Inject error
+	_scratch_inject_error $error_tag
+
+	# Set attribute
+	echo "$attr_value" | ${ATTR_PROG} -$flag "$attr_name" $testfile 2>&1 | \
+			    _filter_scratch
+
+	# FS should be shut down, touch will fail
+	touch $testfile 2>&1 | _filter_scratch
+
+	# Remount to replay log
+	_scratch_remount_dump_log >> $seqres.full
+
+	# FS should be online, touch should succeed
+	touch $testfile
+
+	# Verify attr recovery
+	$ATTR_PROG -l $testfile | _filter_scratch
+	echo -n "$attr_name: "
+	$ATTR_PROG -q -g $attr_name $testfile | md5sum;
+
+	echo ""
+}
+
+create_test_file()
+{
+	filename=$testdir/$1
+	count=$2
+	attr_value=$3
+
+	touch $filename
+
+	for i in `seq $count`
+	do
+		$ATTR_PROG -s "attr_name$i" -V $attr_value $filename >> \
+			$seqres.full
+	done
+}
+
+# real QA test starts here
+_supported_fs xfs
+
+_require_scratch
+_require_scratch_xfs_crc
+_require_attrs
+_require_xfs_io_error_injection "larp"
+_require_xfs_io_error_injection "da_leaf_split"
+_require_xfs_io_error_injection "attr_leaf_to_node"
+_require_xfs_sysfs debug/larp
+test -w /sys/fs/xfs/debug/larp || _notrun "larp knob not writable"
+
+# turn on log attributes
+echo 1 > /sys/fs/xfs/debug/larp
+
+attr16="0123456789ABCDEF"
+attr64="$attr16$attr16$attr16$attr16"
+attr256="$attr64$attr64$attr64$attr64"
+attr1k="$attr256$attr256$attr256$attr256"
+attr4k="$attr1k$attr1k$attr1k$attr1k"
+attr8k="$attr4k$attr4k"
+attr16k="$attr8k$attr8k"
+attr32k="$attr16k$attr16k"
+attr64k="$attr32k$attr32k"
+
+echo "*** mkfs"
+_scratch_mkfs >/dev/null
+
+echo "*** mount FS"
+_scratch_mount
+
+testdir=$SCRATCH_MNT/testdir
+mkdir $testdir
+
+# empty, inline
+create_test_file empty_file1 0
+test_attr_replay empty_file1 "attr_name" $attr64 "s" "larp"
+test_attr_replay empty_file1 "attr_name" $attr64 "r" "larp"
+
+# empty, internal
+create_test_file empty_file2 0
+test_attr_replay empty_file2 "attr_name" $attr1k "s" "larp"
+test_attr_replay empty_file2 "attr_name" $attr1k "r" "larp"
+
+# empty, remote
+create_test_file empty_file3 0
+test_attr_replay empty_file3 "attr_name" $attr64k "s" "larp"
+test_attr_replay empty_file3 "attr_name" $attr64k "r" "larp"
+
+# inline, inline
+create_test_file inline_file1 1 $attr16
+test_attr_replay inline_file1 "attr_name2" $attr64 "s" "larp"
+test_attr_replay inline_file1 "attr_name2" $attr64 "r" "larp"
+
+# inline, internal
+create_test_file inline_file2 1 $attr16
+test_attr_replay inline_file2 "attr_name2" $attr1k "s" "larp"
+test_attr_replay inline_file2 "attr_name2" $attr1k "r" "larp"
+
+# inline, remote
+create_test_file inline_file3 1 $attr16
+test_attr_replay inline_file3 "attr_name2" $attr64k "s" "larp"
+test_attr_replay inline_file3 "attr_name2" $attr64k "r" "larp"
+
+# extent, internal
+create_test_file extent_file1 1 $attr1k
+test_attr_replay extent_file1 "attr_name2" $attr1k "s" "larp"
+test_attr_replay extent_file1 "attr_name2" $attr1k "r" "larp"
+
+# extent, inject error on split
+create_test_file extent_file2 3 $attr1k
+test_attr_replay extent_file2 "attr_name4" $attr1k "s" "da_leaf_split"
+
+# extent, inject error on fork transition
+create_test_file extent_file3 3 $attr1k
+test_attr_replay extent_file3 "attr_name4" $attr1k "s" "attr_leaf_to_node"
+
+# extent, remote
+create_test_file extent_file4 1 $attr1k
+test_attr_replay extent_file4 "attr_name2" $attr64k "s" "larp"
+test_attr_replay extent_file4 "attr_name2" $attr64k "r" "larp"
+
+# remote, internal
+create_test_file remote_file1 1 $attr64k
+test_attr_replay remote_file1 "attr_name2" $attr1k "s" "larp"
+test_attr_replay remote_file1 "attr_name2" $attr1k "r" "larp"
+
+# remote, remote
+create_test_file remote_file2 1 $attr64k
+test_attr_replay remote_file2 "attr_name2" $attr64k "s" "larp"
+test_attr_replay remote_file2 "attr_name2" $attr64k "r" "larp"
+
+# replace shortform with different value
+create_test_file sf_file 2 $attr64
+test_attr_replay sf_file "attr_name2" $attr16 "s" "larp"
+
+# replace leaf with different value
+create_test_file leaf_file 3 $attr1k
+test_attr_replay leaf_file "attr_name2" $attr256 "s" "larp"
+
+# replace node with a different value
+create_test_file node_file 1 $attr64k
+$ATTR_PROG -s "attr_name2" -V $attr1k $testdir/node_file \
+		>> $seqres.full
+test_attr_replay node_file "attr_name2" $attr256 "s" "larp"
+
+echo "*** done"
+status=0
+exit
diff --git a/tests/xfs/600.out b/tests/xfs/600.out
new file mode 100644
index 00000000..fe25ea3e
--- /dev/null
+++ b/tests/xfs/600.out
@@ -0,0 +1,188 @@
+QA output created by 600
+*** mkfs
+*** mount FS
+attr_set: Input/output error
+Could not set "attr_name" for SCRATCH_MNT/testdir/empty_file1
+touch: cannot touch 'SCRATCH_MNT/testdir/empty_file1': Input/output error
+Attribute "attr_name" has a 65 byte value for SCRATCH_MNT/testdir/empty_file1
+attr_name: cfbe2a33be4601d2b655d099a18378fc  -
+
+attr_remove: Input/output error
+Could not remove "attr_name" for SCRATCH_MNT/testdir/empty_file1
+touch: cannot touch 'SCRATCH_MNT/testdir/empty_file1': Input/output error
+attr_name: attr_get: No data available
+Could not get "attr_name" for /mnt/scratch/testdir/empty_file1
+d41d8cd98f00b204e9800998ecf8427e  -
+
+attr_set: Input/output error
+Could not set "attr_name" for SCRATCH_MNT/testdir/empty_file2
+touch: cannot touch 'SCRATCH_MNT/testdir/empty_file2': Input/output error
+Attribute "attr_name" has a 1025 byte value for SCRATCH_MNT/testdir/empty_file2
+attr_name: 9fd415c49d67afc4b78fad4055a3a376  -
+
+attr_remove: Input/output error
+Could not remove "attr_name" for SCRATCH_MNT/testdir/empty_file2
+touch: cannot touch 'SCRATCH_MNT/testdir/empty_file2': Input/output error
+attr_name: attr_get: No data available
+Could not get "attr_name" for /mnt/scratch/testdir/empty_file2
+d41d8cd98f00b204e9800998ecf8427e  -
+
+attr_set: Input/output error
+Could not set "attr_name" for SCRATCH_MNT/testdir/empty_file3
+touch: cannot touch 'SCRATCH_MNT/testdir/empty_file3': Input/output error
+Attribute "attr_name" has a 65536 byte value for SCRATCH_MNT/testdir/empty_file3
+attr_name: 7f6fd1b6d872108bd44bd143cbcdfa19  -
+
+attr_remove: Input/output error
+Could not remove "attr_name" for SCRATCH_MNT/testdir/empty_file3
+touch: cannot touch 'SCRATCH_MNT/testdir/empty_file3': Input/output error
+attr_name: attr_get: No data available
+Could not get "attr_name" for /mnt/scratch/testdir/empty_file3
+d41d8cd98f00b204e9800998ecf8427e  -
+
+attr_set: Input/output error
+Could not set "attr_name2" for SCRATCH_MNT/testdir/inline_file1
+touch: cannot touch 'SCRATCH_MNT/testdir/inline_file1': Input/output error
+Attribute "attr_name1" has a 16 byte value for SCRATCH_MNT/testdir/inline_file1
+Attribute "attr_name2" has a 65 byte value for SCRATCH_MNT/testdir/inline_file1
+attr_name2: cfbe2a33be4601d2b655d099a18378fc  -
+
+attr_remove: Input/output error
+Could not remove "attr_name2" for SCRATCH_MNT/testdir/inline_file1
+touch: cannot touch 'SCRATCH_MNT/testdir/inline_file1': Input/output error
+Attribute "attr_name1" has a 16 byte value for SCRATCH_MNT/testdir/inline_file1
+attr_name2: attr_get: No data available
+Could not get "attr_name2" for /mnt/scratch/testdir/inline_file1
+d41d8cd98f00b204e9800998ecf8427e  -
+
+attr_set: Input/output error
+Could not set "attr_name2" for SCRATCH_MNT/testdir/inline_file2
+touch: cannot touch 'SCRATCH_MNT/testdir/inline_file2': Input/output error
+Attribute "attr_name2" has a 1025 byte value for SCRATCH_MNT/testdir/inline_file2
+Attribute "attr_name1" has a 16 byte value for SCRATCH_MNT/testdir/inline_file2
+attr_name2: 9fd415c49d67afc4b78fad4055a3a376  -
+
+attr_remove: Input/output error
+Could not remove "attr_name2" for SCRATCH_MNT/testdir/inline_file2
+touch: cannot touch 'SCRATCH_MNT/testdir/inline_file2': Input/output error
+Attribute "attr_name1" has a 16 byte value for SCRATCH_MNT/testdir/inline_file2
+attr_name2: attr_get: No data available
+Could not get "attr_name2" for /mnt/scratch/testdir/inline_file2
+d41d8cd98f00b204e9800998ecf8427e  -
+
+attr_set: Input/output error
+Could not set "attr_name2" for SCRATCH_MNT/testdir/inline_file3
+touch: cannot touch 'SCRATCH_MNT/testdir/inline_file3': Input/output error
+Attribute "attr_name2" has a 65536 byte value for SCRATCH_MNT/testdir/inline_file3
+Attribute "attr_name1" has a 16 byte value for SCRATCH_MNT/testdir/inline_file3
+attr_name2: 7f6fd1b6d872108bd44bd143cbcdfa19  -
+
+attr_remove: Input/output error
+Could not remove "attr_name2" for SCRATCH_MNT/testdir/inline_file3
+touch: cannot touch 'SCRATCH_MNT/testdir/inline_file3': Input/output error
+Attribute "attr_name1" has a 16 byte value for SCRATCH_MNT/testdir/inline_file3
+attr_name2: attr_get: No data available
+Could not get "attr_name2" for /mnt/scratch/testdir/inline_file3
+d41d8cd98f00b204e9800998ecf8427e  -
+
+attr_set: Input/output error
+Could not set "attr_name2" for SCRATCH_MNT/testdir/extent_file1
+touch: cannot touch 'SCRATCH_MNT/testdir/extent_file1': Input/output error
+Attribute "attr_name2" has a 1025 byte value for SCRATCH_MNT/testdir/extent_file1
+Attribute "attr_name1" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file1
+attr_name2: 9fd415c49d67afc4b78fad4055a3a376  -
+
+attr_remove: Input/output error
+Could not remove "attr_name2" for SCRATCH_MNT/testdir/extent_file1
+touch: cannot touch 'SCRATCH_MNT/testdir/extent_file1': Input/output error
+Attribute "attr_name1" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file1
+attr_name2: attr_get: No data available
+Could not get "attr_name2" for /mnt/scratch/testdir/extent_file1
+d41d8cd98f00b204e9800998ecf8427e  -
+
+attr_set: Input/output error
+Could not set "attr_name4" for SCRATCH_MNT/testdir/extent_file2
+touch: cannot touch 'SCRATCH_MNT/testdir/extent_file2': Input/output error
+Attribute "attr_name4" has a 1025 byte value for SCRATCH_MNT/testdir/extent_file2
+Attribute "attr_name2" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file2
+Attribute "attr_name3" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file2
+Attribute "attr_name1" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file2
+attr_name4: 9fd415c49d67afc4b78fad4055a3a376  -
+
+attr_set: Input/output error
+Could not set "attr_name4" for SCRATCH_MNT/testdir/extent_file3
+touch: cannot touch 'SCRATCH_MNT/testdir/extent_file3': Input/output error
+Attribute "attr_name4" has a 1025 byte value for SCRATCH_MNT/testdir/extent_file3
+Attribute "attr_name2" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file3
+Attribute "attr_name3" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file3
+Attribute "attr_name1" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file3
+attr_name4: 9fd415c49d67afc4b78fad4055a3a376  -
+
+attr_set: Input/output error
+Could not set "attr_name2" for SCRATCH_MNT/testdir/extent_file4
+touch: cannot touch 'SCRATCH_MNT/testdir/extent_file4': Input/output error
+Attribute "attr_name2" has a 65536 byte value for SCRATCH_MNT/testdir/extent_file4
+Attribute "attr_name1" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file4
+attr_name2: 7f6fd1b6d872108bd44bd143cbcdfa19  -
+
+attr_remove: Input/output error
+Could not remove "attr_name2" for SCRATCH_MNT/testdir/extent_file4
+touch: cannot touch 'SCRATCH_MNT/testdir/extent_file4': Input/output error
+Attribute "attr_name1" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file4
+attr_name2: attr_get: No data available
+Could not get "attr_name2" for /mnt/scratch/testdir/extent_file4
+d41d8cd98f00b204e9800998ecf8427e  -
+
+attr_set: Input/output error
+Could not set "attr_name2" for SCRATCH_MNT/testdir/remote_file1
+touch: cannot touch 'SCRATCH_MNT/testdir/remote_file1': Input/output error
+Attribute "attr_name2" has a 1025 byte value for SCRATCH_MNT/testdir/remote_file1
+Attribute "attr_name1" has a 65536 byte value for SCRATCH_MNT/testdir/remote_file1
+attr_name2: 9fd415c49d67afc4b78fad4055a3a376  -
+
+attr_remove: Input/output error
+Could not remove "attr_name2" for SCRATCH_MNT/testdir/remote_file1
+touch: cannot touch 'SCRATCH_MNT/testdir/remote_file1': Input/output error
+Attribute "attr_name1" has a 65536 byte value for SCRATCH_MNT/testdir/remote_file1
+attr_name2: attr_get: No data available
+Could not get "attr_name2" for /mnt/scratch/testdir/remote_file1
+d41d8cd98f00b204e9800998ecf8427e  -
+
+attr_set: Input/output error
+Could not set "attr_name2" for SCRATCH_MNT/testdir/remote_file2
+touch: cannot touch 'SCRATCH_MNT/testdir/remote_file2': Input/output error
+Attribute "attr_name2" has a 65536 byte value for SCRATCH_MNT/testdir/remote_file2
+Attribute "attr_name1" has a 65536 byte value for SCRATCH_MNT/testdir/remote_file2
+attr_name2: 7f6fd1b6d872108bd44bd143cbcdfa19  -
+
+attr_remove: Input/output error
+Could not remove "attr_name2" for SCRATCH_MNT/testdir/remote_file2
+touch: cannot touch 'SCRATCH_MNT/testdir/remote_file2': Input/output error
+Attribute "attr_name1" has a 65536 byte value for SCRATCH_MNT/testdir/remote_file2
+attr_name2: attr_get: No data available
+Could not get "attr_name2" for /mnt/scratch/testdir/remote_file2
+d41d8cd98f00b204e9800998ecf8427e  -
+
+attr_set: Input/output error
+Could not set "attr_name2" for SCRATCH_MNT/testdir/sf_file
+touch: cannot touch 'SCRATCH_MNT/testdir/sf_file': Input/output error
+Attribute "attr_name1" has a 64 byte value for SCRATCH_MNT/testdir/sf_file
+Attribute "attr_name2" has a 17 byte value for SCRATCH_MNT/testdir/sf_file
+attr_name2: 9a6eb1bc9da3c66a9b495dfe2fe8a756  -
+
+attr_set: Input/output error
+Could not set "attr_name2" for SCRATCH_MNT/testdir/leaf_file
+touch: cannot touch 'SCRATCH_MNT/testdir/leaf_file': Input/output error
+Attribute "attr_name2" has a 257 byte value for SCRATCH_MNT/testdir/leaf_file
+Attribute "attr_name3" has a 1024 byte value for SCRATCH_MNT/testdir/leaf_file
+Attribute "attr_name1" has a 1024 byte value for SCRATCH_MNT/testdir/leaf_file
+attr_name2: f4ea5799d72a0a9bf2d56a685c9cba7a  -
+
+attr_set: Input/output error
+Could not set "attr_name2" for SCRATCH_MNT/testdir/node_file
+touch: cannot touch 'SCRATCH_MNT/testdir/node_file': Input/output error
+Attribute "attr_name2" has a 257 byte value for SCRATCH_MNT/testdir/node_file
+Attribute "attr_name1" has a 65536 byte value for SCRATCH_MNT/testdir/node_file
+attr_name2: f4ea5799d72a0a9bf2d56a685c9cba7a  -
+
+*** done
-- 
2.35.1