From: "Darrick J. Wong" <djwong@kernel.org>
To: David Disseldorp <ddiss@suse.de>
Cc: fstests@vger.kernel.org
Subject: Re: [PATCH v3] tests: _fail on _scratch_mkfs_sized failure
Date: Mon, 29 Apr 2024 09:05:16 -0700 [thread overview]
Message-ID: <20240429160516.GD360908@frogsfrogsfrogs> (raw)
In-Reply-To: <20240429153751.23515-1-ddiss@suse.de>
On Tue, Apr 30, 2024 at 01:37:52AM +1000, David Disseldorp wrote:
> If _scratch_mkfs_sized() fails, e.g. due to an FS not supporting the
> provided size, tests may subsequently mount and run atop a previously
> created (e.g. non-size-bound) filesystem.
> This can lead to difficult to debug failures, or for some -ENOSPC
> exercising tests, near infinite runtimes. Avoid this by renaming the
> current function to _try_scratch_mkfs_sized() and _fail in the parent
> _scratch_mkfs_sized() wrapper.
>
> Suggested-by: Darrick J. Wong <djwong@kernel.org>
> Signed-off-by: David Disseldorp <ddiss@suse.de>
> ---
> Changes since v2:
> - drop existing test-specific _scratch_mkfs_sized() error handlers
> Changes since v1:
> - call _fail in a wrapper function, instead of adding failure handlers
> to individual test _scratch_mkfs_sized() callers.
>
> common/rc | 9 +++++++--
> tests/btrfs/004 | 3 +--
> tests/btrfs/007 | 3 +--
> tests/ext4/021 | 2 +-
> tests/ext4/059 | 2 +-
> tests/generic/015 | 3 +--
> tests/generic/077 | 2 +-
> tests/generic/083 | 3 +--
> tests/generic/171 | 2 +-
> tests/generic/172 | 2 +-
> tests/generic/173 | 2 +-
> tests/generic/174 | 2 +-
> tests/generic/735 | 2 +-
> tests/xfs/015 | 2 +-
> tests/xfs/057 | 3 +--
> 15 files changed, 21 insertions(+), 21 deletions(-)
>
> diff --git a/common/rc b/common/rc
> index 56f1afb6..c3def066 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -968,8 +968,8 @@ _small_fs_size_mb()
> }
>
> # Create fs of certain size on scratch device
> -# _scratch_mkfs_sized <size in bytes> [optional blocksize]
> -_scratch_mkfs_sized()
> +# _try_scratch_mkfs_sized <size in bytes> [optional blocksize]
> +_try_scratch_mkfs_sized()
> {
> local fssize=$1
> local blocksize=$2
> @@ -1111,6 +1111,11 @@ _scratch_mkfs_sized()
> esac
> }
>
> +_scratch_mkfs_sized()
> +{
> + _try_scratch_mkfs_sized $* || _fail "_scratch_mkfs_sized (size=${1}) failed"
I wonder if you ought to dump all the arguments, but the maintainer did
say to print the *size*. :)
Either way this looks decent to me so
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
--D
> +}
> +
> # Emulate an N-data-disk stripe w/ various stripe units
> # _scratch_mkfs_geom <sunit bytes> <swidth multiplier> [optional blocksize]
> _scratch_mkfs_geom()
> diff --git a/tests/btrfs/004 b/tests/btrfs/004
> index 00a516c3..684f5fdf 100755
> --- a/tests/btrfs/004
> +++ b/tests/btrfs/004
> @@ -157,8 +157,7 @@ workout()
> _scratch_unmount >/dev/null 2>&1
> echo "*** mkfs -dsize=$fsz" >>$seqres.full
> echo "" >>$seqres.full
> - _scratch_mkfs_sized $fsz >>$seqres.full 2>&1 \
> - || _fail "size=$fsz mkfs failed"
> + _scratch_mkfs_sized $fsz >>$seqres.full 2>&1
> _scratch_mount
> # -w ensures that the only ops are ones which cause write I/O
> run_check $FSSTRESS_PROG -d $SCRATCH_MNT -w -p $procs -n 2000 \
> diff --git a/tests/btrfs/007 b/tests/btrfs/007
> index 333524e2..a3a5b185 100755
> --- a/tests/btrfs/007
> +++ b/tests/btrfs/007
> @@ -43,8 +43,7 @@ workout()
> _scratch_unmount >/dev/null 2>&1
> echo "*** mkfs -dsize=$fsz" >>$seqres.full
> echo "" >>$seqres.full
> - _scratch_mkfs_sized $fsz >>$seqres.full 2>&1 \
> - || _fail "size=$fsz mkfs failed"
> + _scratch_mkfs_sized $fsz >>$seqres.full 2>&1
> _scratch_mount "-o noatime"
>
> run_check $FSSTRESS_PROG -d $SCRATCH_MNT -n $ops $FSSTRESS_AVOID -x \
> diff --git a/tests/ext4/021 b/tests/ext4/021
> index a9277abf..62768c60 100755
> --- a/tests/ext4/021
> +++ b/tests/ext4/021
> @@ -24,7 +24,7 @@ _scratch_unmount
>
> # With 4k block size, this amounts to 10M FS instance.
> fssize=$((2560 * $blocksize))
> -_scratch_mkfs_sized $fssize >> $seqres.full 2>&1 || _fail "mkfs failed"
> +_scratch_mkfs_sized $fssize >> $seqres.full 2>&1
> _require_metadata_journaling $SCRATCH_DEV
>
> offset=0
> diff --git a/tests/ext4/059 b/tests/ext4/059
> index 4230bde9..f4864ffc 100755
> --- a/tests/ext4/059
> +++ b/tests/ext4/059
> @@ -23,7 +23,7 @@ _require_scratch_size_nocheck $((1024 * 1024))
> # Initalize a 512M ext4 fs with resize_inode feature disabled
> dev_size=$((512 * 1024 * 1024))
> MKFS_OPTIONS="-O ^resize_inode $MKFS_OPTIONS" _scratch_mkfs_sized $dev_size \
> - >>$seqres.full 2>&1 || _fail "mkfs failed"
> + >>$seqres.full 2>&1
>
> # Force some reserved GDT blocks to trigger the bug
> $DEBUGFS_PROG -w -R "set_super_value s_reserved_gdt_blocks 100" $SCRATCH_DEV \
> diff --git a/tests/generic/015 b/tests/generic/015
> index 10423a29..716a7b1f 100755
> --- a/tests/generic/015
> +++ b/tests/generic/015
> @@ -31,8 +31,7 @@ _require_no_large_scratch_dev
>
> # btrfs needs at least 256MB (with upward round off) to create a non-mixed mode
> # fs. Ref: btrfs-progs: btrfs_min_dev_size()
> -_scratch_mkfs_sized $((256 * 1024 * 1024)) >> $seqres.full 2>&1 \
> - || _fail "mkfs failed"
> +_scratch_mkfs_sized $((256 * 1024 * 1024)) >> $seqres.full 2>&1
> _scratch_mount
> out=$SCRATCH_MNT/fillup.$$
>
> diff --git a/tests/generic/077 b/tests/generic/077
> index 94d89fae..2624e88f 100755
> --- a/tests/generic/077
> +++ b/tests/generic/077
> @@ -50,7 +50,7 @@ _scratch_unmount >/dev/null 2>&1
> echo "*** MKFS ***" >>$seqres.full
> echo "" >>$seqres.full
> fs_size=$((256 * 1024 * 1024))
> -_scratch_mkfs_sized $fs_size >> $seqres.full 2>&1 || _fail "mkfs failed"
> +_scratch_mkfs_sized $fs_size >> $seqres.full 2>&1
> _scratch_mount
> mkdir $SCRATCH_MNT/subdir
>
> diff --git a/tests/generic/083 b/tests/generic/083
> index 2a5af3cc..4cd1c399 100755
> --- a/tests/generic/083
> +++ b/tests/generic/083
> @@ -50,8 +50,7 @@ workout()
> _scratch_mkfs_xfs -dsize=$fsz,agcount=$ags >>$seqres.full 2>&1 \
> || _fail "size=$fsz,agcount=$ags mkfs failed"
> else
> - _scratch_mkfs_sized $fsz >>$seqres.full 2>&1 \
> - || _fail "size=$fsz mkfs failed"
> + _scratch_mkfs_sized $fsz >>$seqres.full 2>&1
> fi
> _scratch_mount
>
> diff --git a/tests/generic/171 b/tests/generic/171
> index f823a454..fb2a6f14 100755
> --- a/tests/generic/171
> +++ b/tests/generic/171
> @@ -42,7 +42,7 @@ sz_bytes=$((nr_blks * 8 * blksz))
> if [ $sz_bytes -lt $((32 * 1048576)) ]; then
> sz_bytes=$((32 * 1048576))
> fi
> -_scratch_mkfs_sized $sz_bytes >> $seqres.full 2>&1 || _fail "mkfs failed"
> +_scratch_mkfs_sized $sz_bytes >> $seqres.full 2>&1
> _scratch_mount >> $seqres.full 2>&1
> rm -rf $testdir
> mkdir $testdir
> diff --git a/tests/generic/172 b/tests/generic/172
> index 383824b9..ab5122fa 100755
> --- a/tests/generic/172
> +++ b/tests/generic/172
> @@ -40,7 +40,7 @@ umount $SCRATCH_MNT
>
> file_size=$((768 * 1024 * 1024))
> fs_size=$((1024 * 1024 * 1024))
> -_scratch_mkfs_sized $fs_size >> $seqres.full 2>&1 || _fail "mkfs failed"
> +_scratch_mkfs_sized $fs_size >> $seqres.full 2>&1
> _scratch_mount >> $seqres.full 2>&1
> rm -rf $testdir
> mkdir $testdir
> diff --git a/tests/generic/173 b/tests/generic/173
> index e1493278..0eb313e2 100755
> --- a/tests/generic/173
> +++ b/tests/generic/173
> @@ -42,7 +42,7 @@ sz_bytes=$((nr_blks * 8 * blksz))
> if [ $sz_bytes -lt $((32 * 1048576)) ]; then
> sz_bytes=$((32 * 1048576))
> fi
> -_scratch_mkfs_sized $sz_bytes >> $seqres.full 2>&1 || _fail "mkfs failed"
> +_scratch_mkfs_sized $sz_bytes >> $seqres.full 2>&1
> _scratch_mount >> $seqres.full 2>&1
> rm -rf $testdir
> mkdir $testdir
> diff --git a/tests/generic/174 b/tests/generic/174
> index c7a177b8..1505453e 100755
> --- a/tests/generic/174
> +++ b/tests/generic/174
> @@ -43,7 +43,7 @@ sz_bytes=$((nr_blks * 8 * blksz))
> if [ $sz_bytes -lt $((32 * 1048576)) ]; then
> sz_bytes=$((32 * 1048576))
> fi
> -_scratch_mkfs_sized $sz_bytes >> $seqres.full 2>&1 || _fail "mkfs failed"
> +_scratch_mkfs_sized $sz_bytes >> $seqres.full 2>&1
> _scratch_mount >> $seqres.full 2>&1
> rm -rf $testdir
> mkdir $testdir
> diff --git a/tests/generic/735 b/tests/generic/735
> index 0ba111a6..89107a61 100755
> --- a/tests/generic/735
> +++ b/tests/generic/735
> @@ -25,7 +25,7 @@ _require_xfs_io_command "falloc"
> _require_xfs_io_command "finsert"
>
> dev_size=$((80 * 1024 * 1024))
> -_scratch_mkfs_sized $dev_size >>$seqres.full 2>&1 || _fail "mkfs failed"
> +_scratch_mkfs_sized $dev_size >>$seqres.full 2>&1
>
> _scratch_mount
> _require_congruent_file_oplen $SCRATCH_MNT 1048576 # finsert at 1M
> diff --git a/tests/xfs/015 b/tests/xfs/015
> index a7f4d243..3896ce1c 100755
> --- a/tests/xfs/015
> +++ b/tests/xfs/015
> @@ -43,7 +43,7 @@ _scratch_mount
> _require_fs_space $SCRATCH_MNT 196608
> _scratch_unmount
>
> -_scratch_mkfs_sized $((96 * 1024 * 1024)) > $tmp.mkfs.raw || _fail "mkfs failed"
> +_scratch_mkfs_sized $((96 * 1024 * 1024)) > $tmp.mkfs.raw
> cat $tmp.mkfs.raw | _filter_mkfs >$seqres.full 2>$tmp.mkfs
> # get original data blocks number and agcount
> . $tmp.mkfs
> diff --git a/tests/xfs/057 b/tests/xfs/057
> index 6af14c80..0cf16701 100755
> --- a/tests/xfs/057
> +++ b/tests/xfs/057
> @@ -51,8 +51,7 @@ echo "Silence is golden."
> sdev=$(_short_dev $SCRATCH_DEV)
>
> # use a small log fs
> -_scratch_mkfs_sized $((1024 * 1024 * 500)) >> $seqres.full 2>&1 ||
> - _fail "mkfs failed"
> +_scratch_mkfs_sized $((1024 * 1024 * 500)) >> $seqres.full 2>&1
> _scratch_mount
>
> # populate the fs with some data and cycle the mount to reset the log head/tail
> --
> 2.35.3
>
>
next prev parent reply other threads:[~2024-04-29 16:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-29 15:37 [PATCH v3] tests: _fail on _scratch_mkfs_sized failure David Disseldorp
2024-04-29 16:05 ` Darrick J. Wong [this message]
2024-04-29 19:02 ` Zorro Lang
2024-04-30 0:25 ` David Disseldorp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240429160516.GD360908@frogsfrogsfrogs \
--to=djwong@kernel.org \
--cc=ddiss@suse.de \
--cc=fstests@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox