From: Qu Wenruo <quwenruo@cn.fujitsu.com>
To: Tsutomu Itoh <t-itoh@jp.fujitsu.com>,
linux-btrfs@vger.kernel.org, fstests@vger.kernel.org
Subject: Re: [PATCH v2] fstests: btrfs: Add regression test for reserved space leak.
Date: Wed, 5 Aug 2015 09:39:35 +0800 [thread overview]
Message-ID: <55C16957.1010802@cn.fujitsu.com> (raw)
In-Reply-To: <55C16631.1060505@jp.fujitsu.com>
Tsutomu Itoh wrote on 2015/08/05 10:26 +0900:
> On 2015/08/05 10:08, Qu Wenruo wrote:
>> The regression is introduced in v4.2-rc1, with the big btrfs qgroup
>> change.
>> The problem is, qgroup reserved space is never freed, causing even we
>> increase the limit, we can still hit the EDQUOT much faster than it
>> should.
>>
>> Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
>> Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
>> ---
>> tests/btrfs/089 | 88 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>> tests/btrfs/089.out | 5 +++
>> tests/btrfs/group | 1 +
>> 3 files changed, 94 insertions(+)
>> create mode 100755 tests/btrfs/089
>> create mode 100644 tests/btrfs/089.out
>>
>> diff --git a/tests/btrfs/089 b/tests/btrfs/089
>> new file mode 100755
>> index 0000000..82db96c
>> --- /dev/null
>> +++ b/tests/btrfs/089
>> @@ -0,0 +1,88 @@
>> +#! /bin/bash
>> +# FS QA Test 089
>> +#
>> +# Regression test for btrfs qgroup reserved space leak.
>> +#
>> +# Due to qgroup reserved space leak, EDQUOT can be trigged even it's not
>> +# over limit after previous write.
>> +#
>> +#-----------------------------------------------------------------------
>> +# Copyright (c) 2015 Fujitsu. All Rights Reserved.
>> +#
>> +# This program is free software; you can redistribute it and/or
>> +# modify it under the terms of the GNU General Public License as
>> +# published by the Free Software Foundation.
>> +#
>> +# This program is distributed in the hope that it would be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; if not, write the Free Software Foundation,
>> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
>> +#-----------------------------------------------------------------------
>> +#
>> +
>> +seq=`basename $0`
>> +seqres=$RESULT_DIR/$seq
>> +echo "QA output created by $seq"
>> +
>> +here=`pwd`
>> +tmp=/tmp/$$
>> +status=1 # failure is the default!
>> +trap "_cleanup; exit \$status" 0 1 2 3 15
>> +
>> +_cleanup()
>> +{
>> + cd /
>> + rm -f $tmp.*
>> +}
>> +
>> +# get standard environment, filters and checks
>> +. ./common/rc
>> +. ./common/filter
>> +
>> +# real QA test starts here
>> +
>> +# Modify as appropriate.
>> +_supported_fs btrfs
>> +_supported_os Linux
>> +_require_scratch
>> +_need_to_be_root
>> +
>> +# Use big blocksize to ensure there is still enough space left
>> +# for metadata reserve after hitting EDQUOT
>> +BLOCKSIZE=$(( 2 * 1024 * 1024 ))
>> +FILESIZE=$(( 128 * 1024 * 1024 )) # 128Mbytes
>> +
>> +# The last block won't be able to finish write, as metadata takes
>> +# $NODESIZE space, causing the last block triggering EDQUOT
>> +LENGTH=$(( $FILESIZE - $BLOCKSIZE ))
>> +
>> +_scratch_mkfs >>$seqres.full 2>&1
>> +_scratch_mount
>> +_require_fs_space $SCRATCH_MNT $(($FILESIZE * 2 / 1024))
>> +
>> +_run_btrfs_util_prog quota enable $SCRATCH_MNT
>> +_run_btrfs_util_prog qgroup limit $FILESIZE 5 $SCRATCH_MNT
>> +
>> +$XFS_IO_PROG -f -c "pwrite -b $BLOCKSIZE 0 $LENGTH" \
>> + $SCRATCH_MNT/foo | _filter_xfs_io
>> +
>> +# A sync is needed to trigger a commit_transaction.
>> +# As the reserved space freeing happens at commit_transaction time,
>> +# without a transaction commit, no reserved space needs freeing and
>> +# won't trigger the bug.
>> +sync
>
> Isn't '$BTRFS_UTIL_PROG filesystem sync' better instead of 'sync'?
>
> Thanks,
> Tsutomu
Hi, Tsutomu-san,
Yes, I did use such method before, but Dave said it's better to use
unified interface to sync a filesystem other than the specialized one.
So I still use sync as Dave said.
Thanks,
Qu
>
>> +
>> +# Double the limit to allow further write
>> +_run_btrfs_util_prog qgroup limit $(($FILESIZE * 2)) 5 $SCRATCH_MNT
>> +
>> +# Test whether further write can succeed
>> +$XFS_IO_PROG -f -c "pwrite -b $BLOCKSIZE $LENGTH $LENGTH" \
>> + $SCRATCH_MNT/foo | _filter_xfs_io
>> +
>> +# success, all done
>> +status=0
>> +exit
>> diff --git a/tests/btrfs/089.out b/tests/btrfs/089.out
>> new file mode 100644
>> index 0000000..396888f
>> --- /dev/null
>> +++ b/tests/btrfs/089.out
>> @@ -0,0 +1,5 @@
>> +QA output created by 089
>> +wrote 132120576/132120576 bytes at offset 0
>> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
>> +wrote 132120576/132120576 bytes at offset 132120576
>> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
>> diff --git a/tests/btrfs/group b/tests/btrfs/group
>> index ffe18bf..225b532 100644
>> --- a/tests/btrfs/group
>> +++ b/tests/btrfs/group
>> @@ -91,6 +91,7 @@
>> 086 auto quick clone
>> 087 auto quick send
>> 088 auto quick metadata
>> +089 auto quick qgroup
>> 090 auto quick metadata
>> 091 auto quick qgroup
>> 092 auto quick send
>>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2015-08-05 1:39 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-05 1:08 [PATCH v2] fstests: btrfs: Add regression test for reserved space leak Qu Wenruo
2015-08-05 1:26 ` Tsutomu Itoh
2015-08-05 1:39 ` Qu Wenruo [this message]
2015-08-05 1:57 ` Dave Chinner
2015-08-05 2:52 ` Tsutomu Itoh
2015-08-05 2:59 ` Qu Wenruo
2015-08-05 3:10 ` Dave Chinner
2015-08-05 4:04 ` Tsutomu Itoh
2015-08-05 7:46 ` Filipe David Manana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55C16957.1010802@cn.fujitsu.com \
--to=quwenruo@cn.fujitsu.com \
--cc=fstests@vger.kernel.org \
--cc=linux-btrfs@vger.kernel.org \
--cc=t-itoh@jp.fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox