From: "Darrick J. Wong" <djwong@kernel.org>
To: Dave Chinner <david@fromorbit.com>
Cc: fstests@vger.kernel.org
Subject: Re: [PATCH 1/3] fstests: filter quota warnings
Date: Mon, 16 May 2022 14:09:54 -0700 [thread overview]
Message-ID: <YoK9okOa5PPSg1wy@magnolia> (raw)
In-Reply-To: <YoJtGrvDeeOmvFw0@magnolia>
On Mon, May 16, 2022 at 08:26:18AM -0700, Darrick J. Wong wrote:
> On Mon, May 16, 2022 at 04:08:05PM +1000, Dave Chinner wrote:
> > From: Dave Chinner <dchinner@redhat.com>
> >
> > Quota warning code has been removed from the upstream kernel and now
> > returns -EINVAL errors. Seeing as we can't set warnings anymore and
> > they have always been non-functional in the kernel, just remove the
> > calls to set warnings filter those errors out so those tests pass
> > again.
> >
> > Signed-off-by: Dave Chinner <dchinner@redhat.com>
> > ---
> > tests/xfs/050 | 9 ---------
> > tests/xfs/153 | 9 ---------
> > tests/xfs/299 | 9 ---------
> > 3 files changed, 27 deletions(-)
> >
> > diff --git a/tests/xfs/050 b/tests/xfs/050
> > index 1847611b..2220e470 100755
> > --- a/tests/xfs/050
> > +++ b/tests/xfs/050
> > @@ -84,9 +84,6 @@ _exercise()
> > _qsetup $1
> >
> > echo "Using type=$type id=$id" >>$seqres.full
> > -
> > - $XFS_QUOTA_PROG -x -c "warn -$type 65535 -d" $SCRATCH_DEV
> > -
> > echo
> > echo "*** report no quota settings" | tee -a $seqres.full
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > @@ -113,7 +110,6 @@ _exercise()
> > _file_as_id $SCRATCH_MNT/softie3 $id $type 1024 0
> > _file_as_id $SCRATCH_MNT/softie4 $id $type 1024 0
> > _qmount
> > - $XFS_QUOTA_PROG -x -c "warn -i -$type 0 $id" $SCRATCH_DEV
>
> I don't think we can revert this line from commit e5bbd47e
> ("xfs/{050,299}: clear quota warnings in between checks") because any
> kernel released in the past two years will increment the warning
> counter, and not resetting it to zero between tests means the golden
> output will break.
>
> We could, however, use more sed magic to force the warning counts in the
> repquota output to be zero, which (I think) enables these changes to
> move forward.
...or, redirecting stdout and stderr to /dev/null makes the test pass on
really old, 5.18, and 5.19-next kernels:
$XFS_QUOTA_PROG -x -c "warn -i -$type 0 $id" $SCRATCH_DEV &>> /dev/null
--D
> --D
>
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > -c "repquota -birnN -$type" $SCRATCH_DEV |
> > _filter_quota_report | LC_COLLATE=POSIX sort -ru
> > @@ -122,8 +118,6 @@ _exercise()
> > echo "*** push past the soft block limit" | tee -a $seqres.full
> > _file_as_id $SCRATCH_MNT/softie $id $type $bsize 300
> > _qmount
> > - $XFS_QUOTA_PROG -x -c "warn -i -$type 0 $id" \
> > - -c "warn -b -$type 0 $id" $SCRATCH_DEV
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > -c "repquota -birnN -$type" $SCRATCH_DEV |
> > _filter_quota_report | LC_COLLATE=POSIX sort -ru
> > @@ -136,8 +130,6 @@ _exercise()
> > _file_as_id $SCRATCH_MNT/hard$i $id $type 1024 0
> > done
> > _qmount
> > - $XFS_QUOTA_PROG -x -c "warn -b -$type 0 $id" \
> > - -c "warn -i -$type 0 $id" $SCRATCH_DEV
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > -c "repquota -birnN -$type" $SCRATCH_DEV |
> > _filter_quota_report | LC_COLLATE=POSIX sort -ru
> > @@ -149,7 +141,6 @@ _exercise()
> > echo "ls -l $SCRATCH_MNT" >>$seqres.full
> > ls -l $SCRATCH_MNT >>$seqres.full
> > _qmount
> > - $XFS_QUOTA_PROG -x -c "warn -b -$type 0 $id" $SCRATCH_DEV
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > -c "repquota -birnN -$type" $SCRATCH_DEV |
> > _filter_and_check_blks | LC_COLLATE=POSIX sort -ru
> > diff --git a/tests/xfs/153 b/tests/xfs/153
> > index 8e1430c0..dbe26b68 100755
> > --- a/tests/xfs/153
> > +++ b/tests/xfs/153
> > @@ -89,9 +89,6 @@ run_tests()
> > _qsetup $1
> >
> > echo "Using type=$type id=$id" >>$seqres.full
> > -
> > - $XFS_QUOTA_PROG -x -c "warn -$type 65535 -d" $SCRATCH_DEV
> > -
> > echo
> > echo "*** report no quota settings" | tee -a $seqres.full
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > @@ -122,7 +119,6 @@ run_tests()
> > _file_as_id $SCRATCH_MNT/softie4 0 $type 1024 0
> > _scratch_umount_idmapped
> > _qmount
> > - $XFS_QUOTA_PROG -x -c "warn -i -$type 0 $id" $SCRATCH_DEV
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > -c "repquota -birnN -$type" $SCRATCH_DEV |
> > _filter_quota_report | LC_COLLATE=POSIX sort -ru
> > @@ -133,8 +129,6 @@ run_tests()
> > _file_as_id $SCRATCH_MNT/softie 0 $type $bsize 300
> > _scratch_umount_idmapped
> > _qmount
> > - $XFS_QUOTA_PROG -x -c "warn -i -$type 0 $id" \
> > - -c "warn -b -$type 0 $id" $SCRATCH_DEV
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > -c "repquota -birnN -$type" $SCRATCH_DEV |
> > _filter_quota_report | LC_COLLATE=POSIX sort -ru
> > @@ -149,8 +143,6 @@ run_tests()
> > _scratch_umount_idmapped
> > done
> > _qmount
> > - $XFS_QUOTA_PROG -x -c "warn -b -$type 0 $id" \
> > - -c "warn -i -$type 0 $id" $SCRATCH_DEV
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > -c "repquota -birnN -$type" $SCRATCH_DEV |
> > _filter_quota_report | LC_COLLATE=POSIX sort -ru
> > @@ -164,7 +156,6 @@ run_tests()
> > echo "ls -l $SCRATCH_MNT" >>$seqres.full
> > ls -l $SCRATCH_MNT >>$seqres.full
> > _qmount
> > - $XFS_QUOTA_PROG -x -c "warn -b -$type 0 $id" $SCRATCH_DEV
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > -c "repquota -birnN -$type" $SCRATCH_DEV |
> > _filter_and_check_blks | LC_COLLATE=POSIX sort -ru
> > diff --git a/tests/xfs/299 b/tests/xfs/299
> > index a3077b0c..4b9df3c6 100755
> > --- a/tests/xfs/299
> > +++ b/tests/xfs/299
> > @@ -70,9 +70,6 @@ _exercise()
> > _qsetup $1
> >
> > echo "Using type=$type id=$id" >>$seqres.full
> > -
> > - $XFS_QUOTA_PROG -x -c "warn -$type 65535 -d" $SCRATCH_DEV
> > -
> > echo
> > echo "*** report no quota settings" | tee -a $seqres.full
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > @@ -99,7 +96,6 @@ _exercise()
> > _file_as_id $SCRATCH_MNT/softie3 $id $type 1024 0
> > _file_as_id $SCRATCH_MNT/softie4 $id $type 1024 0
> > _qmount
> > - $XFS_QUOTA_PROG -x -c "warn -i -$type 0 $id" $SCRATCH_DEV
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > -c "repquota -birnN -$type" $SCRATCH_DEV |
> > _filter_quota_report | LC_COLLATE=POSIX sort -ru
> > @@ -108,8 +104,6 @@ _exercise()
> > echo "*** push past the soft block limit" | tee -a $seqres.full
> > _file_as_id $SCRATCH_MNT/softie $id $type $bsize 200
> > _qmount
> > - $XFS_QUOTA_PROG -x -c "warn -i -$type 0 $id" \
> > - -c "warn -b -$type 0 $id" $SCRATCH_DEV
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > -c "repquota -birnN -$type" $SCRATCH_DEV |
> > _filter_quota_report | LC_COLLATE=POSIX sort -ru
> > @@ -122,8 +116,6 @@ _exercise()
> > _file_as_id $SCRATCH_MNT/hard$i $id $type 1024 0
> > done
> > _qmount
> > - $XFS_QUOTA_PROG -x -c "warn -b -$type 0 $id" \
> > - -c "warn -i -$type 0 $id" $SCRATCH_DEV
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > -c "repquota -birnN -$type" $SCRATCH_DEV |
> > _filter_quota_report | LC_COLLATE=POSIX sort -ru
> > @@ -135,7 +127,6 @@ _exercise()
> > echo "ls -l $SCRATCH_MNT" >>$seqres.full
> > ls -l $SCRATCH_MNT >>$seqres.full
> > _qmount
> > - $XFS_QUOTA_PROG -x -c "warn -b -$type 0 $id" $SCRATCH_DEV
> > $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
> > -c "repquota -birnN -$type" $SCRATCH_DEV |
> > _filter_and_check_blks | LC_COLLATE=POSIX sort -ru
> > --
> > 2.35.1
> >
next prev parent reply other threads:[~2022-05-16 21:15 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-16 6:08 [PATCH 0/3] fstests: test updates for XFS 5.19 kernel mods Dave Chinner
2022-05-16 6:08 ` [PATCH 1/3] fstests: filter quota warnings Dave Chinner
2022-05-16 15:26 ` Darrick J. Wong
2022-05-16 21:09 ` Dave Chinner
2022-05-16 21:09 ` Darrick J. Wong [this message]
2022-05-16 6:08 ` [PATCH 2/3] xfs/122: add attribute log formats to test output Dave Chinner
2022-05-16 15:27 ` Darrick J. Wong
2022-05-16 6:08 ` [PATCH 3/3] xfs/348: golden output is not correct Dave Chinner
2022-05-16 15:29 ` Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YoK9okOa5PPSg1wy@magnolia \
--to=djwong@kernel.org \
--cc=david@fromorbit.com \
--cc=fstests@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox