* [PATCH 4/6] Take --git-dir into consideration during bash completion.
@ 2006-11-05 11:21 Shawn O. Pearce
0 siblings, 0 replies; only message in thread
From: Shawn O. Pearce @ 2006-11-05 11:21 UTC (permalink / raw)
To: Junio C Hamano; +Cc: git
If the user has setup a command line of "git --git-dir=baz" then
anything we complete must be performed within the scope of "baz"
and not the current working directory.
This is useful with commands such as "git --git-dir=git.git log m"
to complete out "master" and view the log for the master branch of
the git.git repository. As a nice side effect this also works for
aliases within the target repository, just as git would honor them.
Unfortunately because we still examine arguments by absolute position
in most of the more complex commands (e.g. git push) using --git-dir
with those commands will probably still cause completion to fail.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
---
contrib/completion/git-completion.bash | 123 ++++++++++++++++++--------------
1 files changed, 70 insertions(+), 53 deletions(-)
diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash
index 5f1be46..f258f2f 100755
--- a/contrib/completion/git-completion.bash
+++ b/contrib/completion/git-completion.bash
@@ -19,15 +19,20 @@
# source ~/.git-completion.sh
#
+__gitdir ()
+{
+ echo "${__git_dir:-$(git rev-parse --git-dir 2>/dev/null)}"
+}
+
__git_refs ()
{
- local cmd i is_hash=y
- if [ -d "$1" ]; then
+ local cmd i is_hash=y dir="${1:-$(__gitdir)}"
+ if [ -d "$dir" ]; then
cmd=git-peek-remote
else
cmd=git-ls-remote
fi
- for i in $($cmd "$1" 2>/dev/null); do
+ for i in $($cmd "$dir" 2>/dev/null); do
case "$is_hash,$i" in
y,*) is_hash=n ;;
n,*^{}) is_hash=y ;;
@@ -40,13 +45,13 @@ __git_refs ()
__git_refs2 ()
{
- local cmd i is_hash=y
- if [ -d "$1" ]; then
+ local cmd i is_hash=y dir="${1:-$(__gitdir)}"
+ if [ -d "$dir" ]; then
cmd=git-peek-remote
else
cmd=git-ls-remote
fi
- for i in $($cmd "$1" 2>/dev/null); do
+ for i in $($cmd "$dir" 2>/dev/null); do
case "$is_hash,$i" in
y,*) is_hash=n ;;
n,*^{}) is_hash=y ;;
@@ -59,14 +64,14 @@ __git_refs2 ()
__git_remotes ()
{
- local i ngoff IFS=$'\n'
+ local i ngoff IFS=$'\n' d="$(__gitdir)"
shopt -q nullglob || ngoff=1
shopt -s nullglob
- for i in .git/remotes/*; do
- echo ${i#.git/remotes/}
+ for i in "$d/remotes"/*; do
+ echo ${i#$d/remotes/}
done
[ "$ngoff" ] && shopt -u nullglob
- for i in $(git repo-config --list); do
+ for i in $(git --git-dir="$d" repo-config --list); do
case "$i" in
remote.*.url=*)
i="${i#remote.}"
@@ -95,7 +100,7 @@ __git_complete_file ()
;;
esac
COMPREPLY=($(compgen -P "$pfx" \
- -W "$(git-ls-tree "$ls" \
+ -W "$(git --git-dir="$(__gitdir)" ls-tree "$ls" \
| sed '/^100... blob /s,^.* ,,
/^040000 tree /{
s,^.* ,,
@@ -105,7 +110,7 @@ __git_complete_file ()
-- "$cur"))
;;
*)
- COMPREPLY=($(compgen -W "$(__git_refs .)" -- "$cur"))
+ COMPREPLY=($(compgen -W "$(__git_refs)" -- "$cur"))
;;
esac
}
@@ -113,7 +118,7 @@ __git_complete_file ()
__git_aliases ()
{
local i IFS=$'\n'
- for i in $(git repo-config --list); do
+ for i in $(git --git-dir="$(__gitdir)" repo-config --list); do
case "$i" in
alias.*)
i="${i#alias.}"
@@ -125,7 +130,8 @@ __git_aliases ()
__git_aliased_command ()
{
- local word cmdline=$(git repo-config --get "alias.$1")
+ local word cmdline=$(git --git-dir="$(__gitdir)" \
+ repo-config --get "alias.$1")
for word in $cmdline; do
if [ "${word##-*}" ]; then
echo $word
@@ -137,7 +143,7 @@ __git_aliased_command ()
_git_branch ()
{
local cur="${COMP_WORDS[COMP_CWORD]}"
- COMPREPLY=($(compgen -W "-l -f -d -D $(__git_refs .)" -- "$cur"))
+ COMPREPLY=($(compgen -W "-l -f -d -D $(__git_refs)" -- "$cur"))
}
_git_cat_file ()
@@ -159,7 +165,7 @@ _git_cat_file ()
_git_checkout ()
{
local cur="${COMP_WORDS[COMP_CWORD]}"
- COMPREPLY=($(compgen -W "-l -b $(__git_refs .)" -- "$cur"))
+ COMPREPLY=($(compgen -W "-l -b $(__git_refs)" -- "$cur"))
}
_git_diff ()
@@ -170,7 +176,7 @@ _git_diff ()
_git_diff_tree ()
{
local cur="${COMP_WORDS[COMP_CWORD]}"
- COMPREPLY=($(compgen -W "-r -p -M $(__git_refs .)" -- "$cur"))
+ COMPREPLY=($(compgen -W "-r -p -M $(__git_refs)" -- "$cur"))
}
_git_fetch ()
@@ -188,7 +194,7 @@ _git_fetch ()
case "$cur" in
*:*)
cur=$(echo "$cur" | sed 's/^.*://')
- COMPREPLY=($(compgen -W "$(__git_refs .)" -- "$cur"))
+ COMPREPLY=($(compgen -W "$(__git_refs)" -- "$cur"))
;;
*)
local remote
@@ -221,10 +227,10 @@ _git_log ()
*..*)
local pfx=$(echo "$cur" | sed 's/\.\..*$/../')
cur=$(echo "$cur" | sed 's/^.*\.\.//')
- COMPREPLY=($(compgen -P "$pfx" -W "$(__git_refs .)" -- "$cur"))
+ COMPREPLY=($(compgen -P "$pfx" -W "$(__git_refs)" -- "$cur"))
;;
*)
- COMPREPLY=($(compgen -W "$(__git_refs .)" -- "$cur"))
+ COMPREPLY=($(compgen -W "$(__git_refs)" -- "$cur"))
;;
esac
}
@@ -232,7 +238,7 @@ _git_log ()
_git_merge_base ()
{
local cur="${COMP_WORDS[COMP_CWORD]}"
- COMPREPLY=($(compgen -W "$(__git_refs .)" -- "$cur"))
+ COMPREPLY=($(compgen -W "$(__git_refs)" -- "$cur"))
}
_git_pull ()
@@ -280,7 +286,7 @@ _git_push ()
COMPREPLY=($(compgen -W "$(__git_refs "$remote")" -- "$cur"))
;;
*)
- COMPREPLY=($(compgen -W "$(__git_refs2 .)" -- "$cur"))
+ COMPREPLY=($(compgen -W "$(__git_refs2)" -- "$cur"))
;;
esac
;;
@@ -291,56 +297,67 @@ _git_reset ()
{
local cur="${COMP_WORDS[COMP_CWORD]}"
local opt="--mixed --hard --soft"
- COMPREPLY=($(compgen -W "$opt $(__git_refs .)" -- "$cur"))
+ COMPREPLY=($(compgen -W "$opt $(__git_refs)" -- "$cur"))
}
_git_show ()
{
local cur="${COMP_WORDS[COMP_CWORD]}"
- COMPREPLY=($(compgen -W "$(__git_refs .)" -- "$cur"))
+ COMPREPLY=($(compgen -W "$(__git_refs)" -- "$cur"))
}
_git ()
{
- if [ $COMP_CWORD = 1 ]; then
+ local i c=1 command __git_dir
+
+ while [ $c -lt $COMP_CWORD ]; do
+ i="${COMP_WORDS[c]}"
+ case "$i" in
+ --git-dir=*) __git_dir="${i#--git-dir=}" ;;
+ --bare) __git_dir="." ;;
+ --version|--help|-p|--paginate) ;;
+ *) command="$i"; break ;;
+ esac
+ c=$((++c))
+ done
+
+ if [ $c -eq $COMP_CWORD -a -z "$command" ]; then
COMPREPLY=($(compgen \
- -W "--version $(git help -a|egrep '^ ') \
+ -W "--git-dir= --version \
+ $(git help -a|egrep '^ ') \
$(__git_aliases)" \
-- "${COMP_WORDS[COMP_CWORD]}"))
- else
- local command="${COMP_WORDS[1]}"
- local expansion=$(__git_aliased_command "$command")
+ return;
+ fi
- if [ "$expansion" ]; then
- command="$expansion"
- fi
+ local expansion=$(__git_aliased_command "$command")
+ [ "$expansion" ] && command="$expansion"
- case "$command" in
- branch) _git_branch ;;
- cat-file) _git_cat_file ;;
- checkout) _git_checkout ;;
- diff) _git_diff ;;
- diff-tree) _git_diff_tree ;;
- fetch) _git_fetch ;;
- log) _git_log ;;
- ls-remote) _git_ls_remote ;;
- ls-tree) _git_ls_tree ;;
- merge-base) _git_merge_base ;;
- pull) _git_pull ;;
- push) _git_push ;;
- reset) _git_reset ;;
- show) _git_show ;;
- show-branch) _git_log ;;
- whatchanged) _git_log ;;
- *) COMPREPLY=() ;;
- esac
- fi
+ case "$command" in
+ branch) _git_branch ;;
+ cat-file) _git_cat_file ;;
+ checkout) _git_checkout ;;
+ diff) _git_diff ;;
+ diff-tree) _git_diff_tree ;;
+ fetch) _git_fetch ;;
+ log) _git_log ;;
+ ls-remote) _git_ls_remote ;;
+ ls-tree) _git_ls_tree ;;
+ merge-base) _git_merge_base ;;
+ pull) _git_pull ;;
+ push) _git_push ;;
+ reset) _git_reset ;;
+ show) _git_show ;;
+ show-branch) _git_log ;;
+ whatchanged) _git_log ;;
+ *) COMPREPLY=() ;;
+ esac
}
_gitk ()
{
local cur="${COMP_WORDS[COMP_CWORD]}"
- COMPREPLY=($(compgen -W "--all $(__git_refs .)" -- "$cur"))
+ COMPREPLY=($(compgen -W "--all $(__git_refs)" -- "$cur"))
}
complete -o default -o nospace -F _git git
--
1.4.3.3.g9621
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2006-11-05 11:22 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-11-05 11:21 [PATCH 4/6] Take --git-dir into consideration during bash completion Shawn O. Pearce
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox