[PATCH 10/10] t5710: use proper file:// URIs for absolute paths

[Christian Couder <christian.couder@gmail.com>]

In t5710, we frequently construct local file URIs using `file://$(pwd)`.
On Unix-like systems, $(pwd) returns an absolute path starting with a
slash (e.g., `/tmp/repo`), resulting in a valid 3-slash URI with an
empty host (`file:///tmp/repo`).

However, on Windows, $(pwd) returns a path starting with a drive
letter (e.g., `D:/a/repo`). This results in a 2-slash URI
(`file://D:/a/repo`). Standard URI parsers misinterpret this format,
treating `D:` as the host rather than part of the absolute path.

This is to be expected because RFC 8089 says that the `//` prefix with
an empty local host must be followed by an absolute path starting with
a slash.

While this hasn't broken the existing tests (because the old
`promisor.acceptFromServer` logic relies entirely on strict `strcmp()`
without normalizing the URLs), it will break future commits that pass
these URLs through `url_normalize()` or similar functions.

To future-proof the tests and ensure cross-platform URI compliance,
let's introduce a $PWD_URL helper that explicitly guarantees a leading
slash for the path component, ensuring valid 3-slash `file:///` URIs on
all operating systems.

While at it, let's also introduce $ENCODED_PWD_URL to handle spaces in
directory paths (which is needed for URL glob pattern matching).

Then let's replace all instances of `file://$(pwd)` with $PWD_URL across
the test script, and let's simplify the `ENCODED_URL` constructions in
the `sendFields` and `checkFields` tests to use $ENCODED_PWD_URL
directly.

Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
---
 t/t5710-promisor-remote-capability.sh | 55 ++++++++++++++++-----------
 1 file changed, 32 insertions(+), 23 deletions(-)

diff --git a/t/t5710-promisor-remote-capability.sh b/t/t5710-promisor-remote-capability.sh
index bf0eed9f10..3eca6601ca 100755
--- a/t/t5710-promisor-remote-capability.sh
+++ b/t/t5710-promisor-remote-capability.sh
@@ -76,6 +76,17 @@ copy_to_lop () {
 	cp "$path" "$path2"
 }
 
+# On Windows, 'pwd' returns a path like 'D:/foo/bar'. Prepend '/' to turn
+# it into '/D:/foo/bar', which is what git expects in file:// URLs on Windows.
+# On Unix, the path already starts with '/', so this is a no-op.
+pwd_path=$(pwd)
+case "$pwd_path" in
+[a-zA-Z]:*) pwd_path="/$pwd_path" ;;
+esac
+PWD_URL="file://$pwd_path"
+# Same as PWD_URL but with spaces percent-encoded, for use in URL patterns.
+ENCODED_PWD_URL="file://$(echo "$pwd_path" | sed "s/ /%20/g")"
+
 test_expect_success "setup for testing promisor remote advertisement" '
 	# Create another bare repo called "lop" (for Large Object Promisor)
 	git init --bare lop &&
@@ -88,7 +99,7 @@ test_expect_success "setup for testing promisor remote advertisement" '
 	initialize_server 1 "$oid" &&
 
 	# Configure lop as promisor remote for server
-	git -C server remote add lop "file://$(pwd)/lop" &&
+	git -C server remote add lop "$PWD_URL/lop" &&
 	git -C server config remote.lop.promisor true &&
 
 	git -C lop config uploadpack.allowFilter true &&
@@ -104,7 +115,7 @@ test_expect_success "clone with promisor.advertise set to 'true'" '
 	# Clone from server to create a client
 	GIT_NO_LAZY_FETCH=0 git clone -c remote.lop.promisor=true \
 		-c remote.lop.fetch="+refs/heads/*:refs/remotes/lop/*" \
-		-c remote.lop.url="file://$(pwd)/lop" \
+		-c remote.lop.url="$PWD_URL/lop" \
 		-c promisor.acceptfromserver=All \
 		--no-local --filter="blob:limit=5k" server client &&
 
@@ -119,7 +130,7 @@ test_expect_success "clone with promisor.advertise set to 'false'" '
 	# Clone from server to create a client
 	GIT_NO_LAZY_FETCH=0 git clone -c remote.lop.promisor=true \
 		-c remote.lop.fetch="+refs/heads/*:refs/remotes/lop/*" \
-		-c remote.lop.url="file://$(pwd)/lop" \
+		-c remote.lop.url="$PWD_URL/lop" \
 		-c promisor.acceptfromserver=All \
 		--no-local --filter="blob:limit=5k" server client &&
 
@@ -137,7 +148,7 @@ test_expect_success "clone with promisor.acceptfromserver set to 'None'" '
 	# Clone from server to create a client
 	GIT_NO_LAZY_FETCH=0 git clone -c remote.lop.promisor=true \
 		-c remote.lop.fetch="+refs/heads/*:refs/remotes/lop/*" \
-		-c remote.lop.url="file://$(pwd)/lop" \
+		-c remote.lop.url="$PWD_URL/lop" \
 		-c promisor.acceptfromserver=None \
 		--no-local --filter="blob:limit=5k" server client &&
 
@@ -156,8 +167,8 @@ test_expect_success "init + fetch with promisor.advertise set to 'true'" '
 	git -C client init &&
 	git -C client config remote.lop.promisor true &&
 	git -C client config remote.lop.fetch "+refs/heads/*:refs/remotes/lop/*" &&
-	git -C client config remote.lop.url "file://$(pwd)/lop" &&
-	git -C client config remote.server.url "file://$(pwd)/server" &&
+	git -C client config remote.lop.url "$PWD_URL/lop" &&
+	git -C client config remote.server.url "$PWD_URL/server" &&
 	git -C client config remote.server.fetch "+refs/heads/*:refs/remotes/server/*" &&
 	git -C client config promisor.acceptfromserver All &&
 	GIT_NO_LAZY_FETCH=0 git -C client fetch --filter="blob:limit=5k" server &&
@@ -242,7 +253,7 @@ test_expect_success "clone with promisor.acceptfromserver set to 'KnownName'" '
 	# Clone from server to create a client
 	GIT_NO_LAZY_FETCH=0 git clone -c remote.lop.promisor=true \
 		-c remote.lop.fetch="+refs/heads/*:refs/remotes/lop/*" \
-		-c remote.lop.url="file://$(pwd)/lop" \
+		-c remote.lop.url="$PWD_URL/lop" \
 		-c promisor.acceptfromserver=KnownName \
 		--no-local --filter="blob:limit=5k" server client &&
 
@@ -257,7 +268,7 @@ test_expect_success "clone with 'KnownName' and different remote names" '
 	# Clone from server to create a client
 	GIT_NO_LAZY_FETCH=0 git clone -c remote.serverTwo.promisor=true \
 		-c remote.serverTwo.fetch="+refs/heads/*:refs/remotes/lop/*" \
-		-c remote.serverTwo.url="file://$(pwd)/lop" \
+		-c remote.serverTwo.url="$PWD_URL/lop" \
 		-c promisor.acceptfromserver=KnownName \
 		--no-local --filter="blob:limit=5k" server client &&
 
@@ -294,7 +305,7 @@ test_expect_success "clone with promisor.acceptfromserver set to 'KnownUrl'" '
 	# Clone from server to create a client
 	GIT_NO_LAZY_FETCH=0 git clone -c remote.lop.promisor=true \
 		-c remote.lop.fetch="+refs/heads/*:refs/remotes/lop/*" \
-		-c remote.lop.url="file://$(pwd)/lop" \
+		-c remote.lop.url="$PWD_URL/lop" \
 		-c promisor.acceptfromserver=KnownUrl \
 		--no-local --filter="blob:limit=5k" server client &&
 
@@ -311,7 +322,7 @@ test_expect_success "clone with 'KnownUrl' and different remote urls" '
 	# Clone from server to create a client
 	GIT_NO_LAZY_FETCH=0 git clone -c remote.lop.promisor=true \
 		-c remote.lop.fetch="+refs/heads/*:refs/remotes/lop/*" \
-		-c remote.lop.url="file://$(pwd)/serverTwo" \
+		-c remote.lop.url="$PWD_URL/serverTwo" \
 		-c promisor.acceptfromserver=KnownUrl \
 		--no-local --filter="blob:limit=5k" server client &&
 
@@ -326,7 +337,7 @@ test_expect_success "clone with 'KnownUrl' and url not configured on the server"
 	git -C server config promisor.advertise true &&
 	test_when_finished "rm -rf client" &&
 
-	test_when_finished "git -C server config set remote.lop.url \"file://$(pwd)/lop\"" &&
+	test_when_finished "git -C server config set remote.lop.url \"$PWD_URL/lop\"" &&
 	git -C server config unset remote.lop.url &&
 
 	# Clone from server to create a client
@@ -335,7 +346,7 @@ test_expect_success "clone with 'KnownUrl' and url not configured on the server"
 	# missing, so the remote name will be used instead which will fail.
 	test_must_fail env GIT_NO_LAZY_FETCH=0 git clone -c remote.lop.promisor=true \
 		-c remote.lop.fetch="+refs/heads/*:refs/remotes/lop/*" \
-		-c remote.lop.url="file://$(pwd)/lop" \
+		-c remote.lop.url="$PWD_URL/lop" \
 		-c promisor.acceptfromserver=KnownUrl \
 		--no-local --filter="blob:limit=5k" server client &&
 
@@ -347,7 +358,7 @@ test_expect_success "clone with 'KnownUrl' and empty url, so not advertised" '
 	git -C server config promisor.advertise true &&
 	test_when_finished "rm -rf client" &&
 
-	test_when_finished "git -C server config set remote.lop.url \"file://$(pwd)/lop\"" &&
+	test_when_finished "git -C server config set remote.lop.url \"$PWD_URL/lop\"" &&
 	git -C server config set remote.lop.url "" &&
 
 	# Clone from server to create a client
@@ -356,7 +367,7 @@ test_expect_success "clone with 'KnownUrl' and empty url, so not advertised" '
 	# so the remote name will be used instead which will fail.
 	test_must_fail env GIT_NO_LAZY_FETCH=0 git clone -c remote.lop.promisor=true \
 		-c remote.lop.fetch="+refs/heads/*:refs/remotes/lop/*" \
-		-c remote.lop.url="file://$(pwd)/lop" \
+		-c remote.lop.url="$PWD_URL/lop" \
 		-c promisor.acceptfromserver=KnownUrl \
 		--no-local --filter="blob:limit=5k" server client &&
 
@@ -380,13 +391,12 @@ test_expect_success "clone with promisor.sendFields" '
 	GIT_TRACE_PACKET="$(pwd)/trace" GIT_NO_LAZY_FETCH=0 git clone \
 		-c remote.lop.promisor=true \
 		-c remote.lop.fetch="+refs/heads/*:refs/remotes/lop/*" \
-		-c remote.lop.url="file://$(pwd)/lop" \
+		-c remote.lop.url="$PWD_URL/lop" \
 		-c promisor.acceptfromserver=All \
 		--no-local --filter="blob:limit=5k" server client &&
 
 	# Check that fields are properly transmitted
-	ENCODED_URL=$(echo "file://$(pwd)/lop" | sed -e "s/ /%20/g") &&
-	PR1="name=lop,url=$ENCODED_URL,partialCloneFilter=blob:none" &&
+	PR1="name=lop,url=$ENCODED_PWD_URL/lop,partialCloneFilter=blob:none" &&
 	PR2="name=otherLop,url=https://invalid.invalid,partialCloneFilter=blob:limit=10k,token=fooBar" &&
 	test_grep "clone< promisor-remote=$PR1;$PR2" trace &&
 	test_grep "clone> promisor-remote=lop;otherLop" trace &&
@@ -411,15 +421,14 @@ test_expect_success "clone with promisor.checkFields" '
 	GIT_TRACE_PACKET="$(pwd)/trace" GIT_NO_LAZY_FETCH=0 git clone \
 		-c remote.lop.promisor=true \
 		-c remote.lop.fetch="+refs/heads/*:refs/remotes/lop/*" \
-		-c remote.lop.url="file://$(pwd)/lop" \
+		-c remote.lop.url="$PWD_URL/lop" \
 		-c remote.lop.partialCloneFilter="blob:none" \
 		-c promisor.acceptfromserver=All \
 		-c promisor.checkFields=partialcloneFilter \
 		--no-local --filter="blob:limit=5k" server client &&
 
 	# Check that fields are properly transmitted
-	ENCODED_URL=$(echo "file://$(pwd)/lop" | sed -e "s/ /%20/g") &&
-	PR1="name=lop,url=$ENCODED_URL,partialCloneFilter=blob:none" &&
+	PR1="name=lop,url=$ENCODED_PWD_URL/lop,partialCloneFilter=blob:none" &&
 	PR2="name=otherLop,url=https://invalid.invalid,partialCloneFilter=blob:limit=10k,token=fooBar" &&
 	test_grep "clone< promisor-remote=$PR1;$PR2" trace &&
 	test_grep "clone> promisor-remote=lop" trace &&
@@ -449,7 +458,7 @@ test_expect_success "clone with promisor.storeFields=partialCloneFilter" '
 	GIT_TRACE_PACKET="$(pwd)/trace" GIT_NO_LAZY_FETCH=0 git clone \
 		-c remote.lop.promisor=true \
 		-c remote.lop.fetch="+refs/heads/*:refs/remotes/lop/*" \
-		-c remote.lop.url="file://$(pwd)/lop" \
+		-c remote.lop.url="$PWD_URL/lop" \
 		-c remote.lop.token="fooYYY" \
 		-c remote.lop.partialCloneFilter="blob:none" \
 		-c promisor.acceptfromserver=All \
@@ -501,7 +510,7 @@ test_expect_success "clone and fetch with --filter=auto" '
 
 	GIT_TRACE_PACKET="$(pwd)/trace" GIT_NO_LAZY_FETCH=0 git clone \
 		-c remote.lop.promisor=true \
-		-c remote.lop.url="file://$(pwd)/lop" \
+		-c remote.lop.url="$PWD_URL/lop" \
 		-c promisor.acceptfromserver=All \
 		--no-local --filter=auto server client 2>err &&
 
@@ -558,7 +567,7 @@ test_expect_success "clone with promisor.advertise set to 'true' but don't delet
 	# Clone from server to create a client
 	GIT_NO_LAZY_FETCH=0 git clone -c remote.lop.promisor=true \
 		-c remote.lop.fetch="+refs/heads/*:refs/remotes/lop/*" \
-		-c remote.lop.url="file://$(pwd)/lop" \
+		-c remote.lop.url="$PWD_URL/lop" \
 		-c promisor.acceptfromserver=All \
 		--no-local --filter="blob:limit=5k" server client &&
 
-- 
2.53.0.765.g57b94de1f0.dirty