[PATCH 0/3] Teach git-replay(1) to linearize merge commits

[PATCH 0/3] Teach git-replay(1) to linearize merge commits

[Toon Claes]

As an alternative to dscho's patch series to replay merges[1], add
option to git-replay(1) to linearize merges. This mimics wath
git-rebase(1) does too with --no-rebase-merges (the default).

The first two patches do some refactoring. The third patch implements
the actual change. I was kindly helped by dscho to implement this
change.

The --linearize option is only added to git-replay(1) and not to
git-history(1) because in my opinion doesn't make much sense to do so,
but I'm happy to hear if anyone disagrees.

This series might conflict with Kristoffer's series to make
documentation changes[2], but should be trivial to resolve. And I don't
think there's a conflict with Patrick's series on adding "drop" to
git-history(1)[3].

dscho's series to replay merges[1] need a bit of rework to fit on top of
this, but I'm happy to help figuring that out.

[1]: <pull.2106.git.1778107405.gitgitgadget@gmail.com>
[2]: <V2_CV_doc_replay_config.767@msgid.xyz>
[3]: <20260603-b4-pks-history-drop-v2-0-742cb5b5176d@pks.im>

Signed-off-by: Toon Claes <toon@iotcl.com>
---
Johannes Schindelin (1):
      replay: offer an option to linearize the commit topology

Toon Claes (2):
      replay: refactor enum replay_mode into a bool
      replay: add helper to put entry into mapped_commits

 Documentation/git-replay.adoc |   5 ++
 builtin/replay.c              |   4 ++
 replay.c                      | 109 +++++++++++++++++++++++-------------------
 replay.h                      |   5 ++
 t/t3650-replay-basics.sh      |  22 +++++++++
 5 files changed, 97 insertions(+), 48 deletions(-)



---
base-commit: 9ac3f193c05c2237e2b14ebaa1149e9fc8a1abe0
change-id: 20260604-toon-git-replay-drop-merges-807fa008d395

[PATCH 1/3] replay: refactor enum replay_mode into a bool

[Toon Claes]

In 2760ee4983 (replay: add --revert mode to reverse commit changes,
2026-03-26) the enum `replay_mode` was introduced. This has two possible
values:

 - The value `REPLAY_MODE_REVERT` is used when option `--revert` is
   passed to git-replay(1). When using this value the commits are
   possible in reverse order and the inverse of the changes are applied.

 - The value `REPLAY_MODE_PICK` is used when either option `--onto` or
   `--advance` is used. In both cases the commits are pocessed in normal
   order, and the changes are applied as-is.

Since there are only two possible values of this enum, simplify the code
by converting the enum into a bool. This avoid adding code paths that
check for invalid vaues of the enum, and shortens code where the value
is checked with a ternary operator.

Signed-off-by: Toon Claes <toon@iotcl.com>
---
 replay.c | 59 +++++++++++++++++++++++++----------------------------------
 1 file changed, 25 insertions(+), 34 deletions(-)

diff --git a/replay.c b/replay.c
index 4ef8abb607..1f8e5b083b 100644
--- a/replay.c
+++ b/replay.c
@@ -18,11 +18,6 @@
  */
 #define the_repository DO_NOT_USE_THE_REPOSITORY
 
-enum replay_mode {
-	REPLAY_MODE_PICK,
-	REPLAY_MODE_REVERT,
-};
-
 static const char *short_commit_name(struct repository *repo,
 				     struct commit *commit)
 {
@@ -81,7 +76,7 @@ static struct commit *create_commit(struct repository *repo,
 				    struct tree *tree,
 				    struct commit *based_on,
 				    struct commit *parent,
-				    enum replay_mode mode)
+				    bool reverse)
 {
 	struct object_id ret;
 	struct object *obj = NULL;
@@ -98,15 +93,13 @@ static struct commit *create_commit(struct repository *repo,
 
 	commit_list_insert(parent, &parents);
 	extra = read_commit_extra_headers(based_on, exclude_gpgsig);
-	if (mode == REPLAY_MODE_REVERT) {
+	if (reverse) {
 		generate_revert_message(&msg, based_on, repo);
 		/* For revert, use current user as author (NULL = use default) */
-	} else if (mode == REPLAY_MODE_PICK) {
+	} else {
 		find_commit_subject(message, &orig_message);
 		strbuf_addstr(&msg, orig_message);
 		author = get_author(message);
-	} else {
-		BUG("unexpected replay mode %d", mode);
 	}
 	reset_ident_date();
 	if (commit_tree_extended(msg.buf, msg.len, &tree->object.oid, parents,
@@ -269,7 +262,7 @@ static struct commit *pick_regular_commit(struct repository *repo,
 					  struct commit *onto,
 					  struct merge_options *merge_opt,
 					  struct merge_result *result,
-					  enum replay_mode mode,
+					  bool reverse,
 					  enum replay_empty_commit_action empty)
 {
 	struct commit *base, *replayed_base;
@@ -287,7 +280,21 @@ static struct commit *pick_regular_commit(struct repository *repo,
 	replayed_base_tree = repo_get_commit_tree(repo, replayed_base);
 	pickme_tree = repo_get_commit_tree(repo, pickme);
 
-	if (mode == REPLAY_MODE_PICK) {
+	if (reverse) {
+		/* Revert: swap base and pickme to reverse the diff */
+		const char *pickme_name = short_commit_name(repo, pickme);
+		merge_opt->branch1 = short_commit_name(repo, replayed_base);
+		merge_opt->branch2 = xstrfmt("parent of %s", pickme_name);
+		merge_opt->ancestor = pickme_name;
+
+		merge_incore_nonrecursive(merge_opt,
+					  pickme_tree,
+					  replayed_base_tree,
+					  base_tree,
+					  result);
+
+		free((char *)merge_opt->branch2);
+	} else {
 		/* Cherry-pick: normal order */
 		merge_opt->branch1 = short_commit_name(repo, replayed_base);
 		merge_opt->branch2 = short_commit_name(repo, pickme);
@@ -303,22 +310,6 @@ static struct commit *pick_regular_commit(struct repository *repo,
 					  result);
 
 		free((char *)merge_opt->ancestor);
-	} else if (mode == REPLAY_MODE_REVERT) {
-		/* Revert: swap base and pickme to reverse the diff */
-		const char *pickme_name = short_commit_name(repo, pickme);
-		merge_opt->branch1 = short_commit_name(repo, replayed_base);
-		merge_opt->branch2 = xstrfmt("parent of %s", pickme_name);
-		merge_opt->ancestor = pickme_name;
-
-		merge_incore_nonrecursive(merge_opt,
-					  pickme_tree,
-					  replayed_base_tree,
-					  base_tree,
-					  result);
-
-		free((char *)merge_opt->branch2);
-	} else {
-		BUG("unexpected replay mode %d", mode);
 	}
 	merge_opt->ancestor = NULL;
 	merge_opt->branch2 = NULL;
@@ -341,7 +332,7 @@ static struct commit *pick_regular_commit(struct repository *repo,
 		}
 	}
 
-	return create_commit(repo, result->tree, pickme, replayed_base, mode);
+	return create_commit(repo, result->tree, pickme, replayed_base, reverse);
 }
 
 void replay_result_release(struct replay_result *result)
@@ -381,13 +372,13 @@ int replay_revisions(struct rev_info *revs,
 	char *revert;
 	const char *ref;
 	struct object_id old_oid;
-	enum replay_mode mode = REPLAY_MODE_PICK;
+	bool reverse;
 	int ret;
 
 	advance = xstrdup_or_null(opts->advance);
 	revert = xstrdup_or_null(opts->revert);
-	if (revert)
-		mode = REPLAY_MODE_REVERT;
+	reverse = !!revert;
+
 	set_up_replay_mode(revs->repo, &revs->cmdline, opts->onto,
 			   &detached_head, &advance, &revert, &onto, &update_refs);
 
@@ -430,8 +421,8 @@ int replay_revisions(struct rev_info *revs,
 			die(_("replaying merge commits is not supported yet!"));
 
 		last_commit = pick_regular_commit(revs->repo, commit, replayed_commits,
-						  mode == REPLAY_MODE_REVERT ? last_commit : onto,
-						  &merge_opt, &result, mode, opts->empty);
+						  reverse ? last_commit : onto,
+						  &merge_opt, &result, reverse, opts->empty);
 		if (!last_commit)
 			break;
 

-- 
2.53.0.1323.g189a785ab5

[PATCH 2/3] replay: add helper to put entry into mapped_commits

[Toon Claes]

The function replay_revisions() in replay.c is rather lengthy. Extract
the logic to put commit entry into mapped_commits into a helper
function.

Signed-off-by: Toon Claes <toon@iotcl.com>
---
 replay.c | 31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/replay.c b/replay.c
index 1f8e5b083b..7921d7dba3 100644
--- a/replay.c
+++ b/replay.c
@@ -243,9 +243,9 @@ static void set_up_replay_mode(struct repository *repo,
 	strset_clear(&rinfo.positive_refs);
 }
 
-static struct commit *mapped_commit(kh_oid_map_t *replayed_commits,
-				    struct commit *commit,
-				    struct commit *fallback)
+static struct commit *get_mapped_commit(kh_oid_map_t *replayed_commits,
+					struct commit *commit,
+					struct commit *fallback)
 {
 	khint_t pos;
 	if (!commit)
@@ -256,6 +256,21 @@ static struct commit *mapped_commit(kh_oid_map_t *replayed_commits,
 	return kh_value(replayed_commits, pos);
 }
 
+static void put_mapped_commit(kh_oid_map_t *replayed_commits,
+			      struct commit *commit,
+			      struct commit *new_commit)
+{
+	khint_t pos;
+	int ret;
+
+	pos = kh_put_oid_map(replayed_commits, commit->object.oid, &ret);
+	if (ret == 0)
+		BUG("Duplicate rewritten commit: %s\n",
+		    oid_to_hex(&commit->object.oid));
+
+	kh_value(replayed_commits, pos) = new_commit;
+}
+
 static struct commit *pick_regular_commit(struct repository *repo,
 					  struct commit *pickme,
 					  kh_oid_map_t *replayed_commits,
@@ -276,7 +291,7 @@ static struct commit *pick_regular_commit(struct repository *repo,
 		base_tree = lookup_tree(repo, repo->hash_algo->empty_tree);
 	}
 
-	replayed_base = mapped_commit(replayed_commits, base, onto);
+	replayed_base = get_mapped_commit(replayed_commits, base, onto);
 	replayed_base_tree = repo_get_commit_tree(repo, replayed_base);
 	pickme_tree = repo_get_commit_tree(repo, pickme);
 
@@ -414,8 +429,6 @@ int replay_revisions(struct rev_info *revs,
 	replayed_commits = kh_init_oid_map();
 	while ((commit = get_revision(revs))) {
 		const struct name_decoration *decoration;
-		khint_t pos;
-		int hr;
 
 		if (commit->parents && commit->parents->next)
 			die(_("replaying merge commits is not supported yet!"));
@@ -427,11 +440,7 @@ int replay_revisions(struct rev_info *revs,
 			break;
 
 		/* Record commit -> last_commit mapping */
-		pos = kh_put_oid_map(replayed_commits, commit->object.oid, &hr);
-		if (hr == 0)
-			BUG("Duplicate rewritten commit: %s\n",
-			    oid_to_hex(&commit->object.oid));
-		kh_value(replayed_commits, pos) = last_commit;
+		put_mapped_commit(replayed_commits, commit, last_commit);
 
 		/* Update any necessary branches */
 		if (ref)

-- 
2.53.0.1323.g189a785ab5

[PATCH 3/3] replay: offer an option to linearize the commit topology

[Toon Claes]

From: Johannes Schindelin <Johannes.Schindelin@gmx.de>

One of the stated goals of git-replay(1) is to allow implementing the
git-rebase(1) functionality on the server side.

The default mode of git-rebase(1) is to act as if `--no-rebase-merges`
was given. This mode drops merge commits instead of replaying them, and
linearized the commit history into a sequence of the
regular (single-parent) commits.

Add option `--linearize` to git-replay(1) do the same.

Co-authored-by: Toon Claes <toon@iotcl.com>
---
 Documentation/git-replay.adoc |  5 +++++
 builtin/replay.c              |  4 ++++
 replay.c                      | 25 +++++++++++++++++++------
 replay.h                      |  5 +++++
 t/t3650-replay-basics.sh      | 22 ++++++++++++++++++++++
 5 files changed, 55 insertions(+), 6 deletions(-)

diff --git a/Documentation/git-replay.adoc b/Documentation/git-replay.adoc
index a32f72aead..41c96c7061 100644
--- a/Documentation/git-replay.adoc
+++ b/Documentation/git-replay.adoc
@@ -88,6 +88,11 @@ incompatible with `--contained` (which is a modifier for `--onto` only).
 +
 The default mode can be configured via the `replay.refAction` configuration variable.
 
+--linearize::
+	In this mode, `git replay` imitates `git rebase --no-rebase-merges`,
+	i.e. it cherry-picks only non-merge commits, each one on top of the
+	previous one.
+
 <revision-range>::
 	Range of commits to replay; see "Specifying Ranges" in
 	linkgit:git-rev-parse[1]. In `--advance=<branch>` or
diff --git a/builtin/replay.c b/builtin/replay.c
index 39e3a86f6c..fedfe46dc6 100644
--- a/builtin/replay.c
+++ b/builtin/replay.c
@@ -111,6 +111,8 @@ int cmd_replay(int argc,
 			     N_("mode"),
 			     N_("control ref update behavior (update|print)"),
 			     PARSE_OPT_NONEG),
+		OPT_BOOL(0, "linearize", &opts.linearize,
+			 N_("ignore merge commits instead of replaying them")),
 		OPT_END()
 	};
 
@@ -132,6 +134,8 @@ int cmd_replay(int argc,
 				  opts.contained, "--contained");
 	die_for_incompatible_opt2(!!opts.ref, "--ref",
 				  !!opts.contained, "--contained");
+	die_for_incompatible_opt2(!!opts.revert, "--revert",
+				  opts.linearize, "--linearize");
 
 	/* Parse ref action mode from command line or config */
 	ref_mode = get_ref_action_mode(repo, ref_action);
diff --git a/replay.c b/replay.c
index 7921d7dba3..3e36908131 100644
--- a/replay.c
+++ b/replay.c
@@ -277,12 +277,16 @@ static struct commit *pick_regular_commit(struct repository *repo,
 					  struct commit *onto,
 					  struct merge_options *merge_opt,
 					  struct merge_result *result,
+					  struct commit *replayed_base,
 					  bool reverse,
 					  enum replay_empty_commit_action empty)
 {
-	struct commit *base, *replayed_base;
+	struct commit *base;
 	struct tree *pickme_tree, *base_tree, *replayed_base_tree;
 
+	if (replayed_base && reverse)
+		BUG("Linearizing commits is not supported when replaying in reverse");
+
 	if (pickme->parents) {
 		base = pickme->parents->item;
 		base_tree = repo_get_commit_tree(repo, base);
@@ -291,7 +295,8 @@ static struct commit *pick_regular_commit(struct repository *repo,
 		base_tree = lookup_tree(repo, repo->hash_algo->empty_tree);
 	}
 
-	replayed_base = get_mapped_commit(replayed_commits, base, onto);
+	if (!replayed_base)
+		replayed_base = get_mapped_commit(replayed_commits, base, onto);
 	replayed_base_tree = repo_get_commit_tree(repo, replayed_base);
 	pickme_tree = repo_get_commit_tree(repo, pickme);
 
@@ -430,12 +435,20 @@ int replay_revisions(struct rev_info *revs,
 	while ((commit = get_revision(revs))) {
 		const struct name_decoration *decoration;
 
-		if (commit->parents && commit->parents->next)
+		if (opts->linearize && (!commit->parents || commit->parents->next))
+			; /* map current commit to the same as the previous commit */
+		else if (commit->parents && commit->parents->next)
 			die(_("replaying merge commits is not supported yet!"));
+		else {
+			struct commit *to_pick = reverse ? last_commit : onto;
+			last_commit =
+				pick_regular_commit(revs->repo, commit,
+						    replayed_commits, to_pick,
+						    &merge_opt, &result,
+						    opts->linearize ? last_commit : NULL,
+						    reverse, opts->empty);
+		}
 
-		last_commit = pick_regular_commit(revs->repo, commit, replayed_commits,
-						  reverse ? last_commit : onto,
-						  &merge_opt, &result, reverse, opts->empty);
 		if (!last_commit)
 			break;
 
diff --git a/replay.h b/replay.h
index 1851a07705..07e6fdcca3 100644
--- a/replay.h
+++ b/replay.h
@@ -62,6 +62,11 @@ struct replay_revisions_options {
 	 * Defaults to REPLAY_EMPTY_COMMIT_DROP.
 	 */
 	enum replay_empty_commit_action empty;
+
+	/*
+	 * Whether to linearize the commits (i.e. drop merge commits).
+	 */
+	int linearize;
 };
 
 /* This struct is used as an out-parameter by `replay_revisions()`. */
diff --git a/t/t3650-replay-basics.sh b/t/t3650-replay-basics.sh
index 3353bc4a4d..c781a3bb1b 100755
--- a/t/t3650-replay-basics.sh
+++ b/t/t3650-replay-basics.sh
@@ -565,4 +565,26 @@ test_expect_success '--onto with --ref rejects multiple revision ranges' '
 	test_grep "cannot be used with multiple revision ranges" err
 '
 
+test_expect_success 'linearize the commit topology' '
+	test_tick &&
+	N=$(git commit-tree -m N -p L -p I L:) &&
+	N=$(git commit-tree -m N-child -p $N L:) &&
+	git update-ref refs/heads/N $N &&
+
+	git replay --ref-action=print --linearize \
+		--onto A B..refs/heads/N >out &&
+
+	test_line_count = 1 out &&
+	read N1 N2 N3 N4 <out &&
+
+	cat >expect <<-EOF &&
+	* N-child
+	* I
+	* L
+	o A
+	EOF
+	git log --format=%s --graph --boundary A...$N3 >actual &&
+	test_cmp expect actual
+'
+
 test_done

-- 
2.53.0.1323.g189a785ab5

Re: [PATCH 3/3] replay: offer an option to linearize the commit topology

[Junio C Hamano]

Toon Claes <toon@iotcl.com> writes:

> From: Johannes Schindelin <Johannes.Schindelin@gmx.de>
>
> One of the stated goals of git-replay(1) is to allow implementing the
> git-rebase(1) functionality on the server side.
>
> The default mode of git-rebase(1) is to act as if `--no-rebase-merges`
> was given. This mode drops merge commits instead of replaying them, and
> linearized the commit history into a sequence of the
> regular (single-parent) commits.

"linearized" -> "linearizes"?

>
> Add option `--linearize` to git-replay(1) do the same.

"do the same" -> "to do the same"?

> Co-authored-by: Toon Claes <toon@iotcl.com>

There is no sign-off by any of the authors?

> @@ -430,12 +435,20 @@ int replay_revisions(struct rev_info *revs,
>  	while ((commit = get_revision(revs))) {
>  		const struct name_decoration *decoration;
>  
> -		if (commit->parents && commit->parents->next)
> +		if (opts->linearize && (!commit->parents || commit->parents->next))
> +			; /* map current commit to the same as the previous commit */

This uses the same treatment on either root commits or merge
commits?  If this were a mistake and this wants to handle merges but
not roots, shouldn't it be more like

		if (opts->linearize && (commit->parents && commit->parents->next))
			; /* map the merge to the previous */

> +		else if (commit->parents && commit->parents->next)
>  			die(_("replaying merge commits is not supported yet!"));

And because the next one is also about merges, perhaps the early
part of this if/else if cascade can be written

		if (commit->parents && commit->parents->next) {
			/* We have a merge */
			if (!opts->linearize)
				die(_("can't replay a merge (yet)"));
			; /* map current to the previous */
		} else {
			...

wouldn't it?

If the "map current to prev" is applicable to root, any root are
mapped to the last_commit in the above, and if we saw a root as the
first thing in the loop, last_commit is NULL, we do not do anything
here, and after the if/else if/else cascade, we see last_commit is
NULL and break out of the loop.

> +		else {
> +			struct commit *to_pick = reverse ? last_commit : onto;
> +			last_commit =
> +				pick_regular_commit(revs->repo, commit,
> +						    replayed_commits, to_pick,
> +						    &merge_opt, &result,
> +						    opts->linearize ? last_commit : NULL,
> +						    reverse, opts->empty);
> +		}
>  
> -		last_commit = pick_regular_commit(revs->repo, commit, replayed_commits,
> -						  reverse ? last_commit : onto,
> -						  &merge_opt, &result, reverse, opts->empty);
>  		if (!last_commit)
>  			break;

> diff --git a/replay.h b/replay.h
> index 1851a07705..07e6fdcca3 100644
> --- a/replay.h
> +++ b/replay.h
> @@ -62,6 +62,11 @@ struct replay_revisions_options {
>  	 * Defaults to REPLAY_EMPTY_COMMIT_DROP.
>  	 */
>  	enum replay_empty_commit_action empty;
> +
> +	/*
> +	 * Whether to linearize the commits (i.e. drop merge commits).
> +	 */
> +	int linearize;
>  };
>  
>  /* This struct is used as an out-parameter by `replay_revisions()`. */
> diff --git a/t/t3650-replay-basics.sh b/t/t3650-replay-basics.sh
> index 3353bc4a4d..c781a3bb1b 100755
> --- a/t/t3650-replay-basics.sh
> +++ b/t/t3650-replay-basics.sh
> @@ -565,4 +565,26 @@ test_expect_success '--onto with --ref rejects multiple revision ranges' '
>  	test_grep "cannot be used with multiple revision ranges" err
>  '
>  
> +test_expect_success 'linearize the commit topology' '
> +	test_tick &&
> +	N=$(git commit-tree -m N -p L -p I L:) &&
> +	N=$(git commit-tree -m N-child -p $N L:) &&
> +	git update-ref refs/heads/N $N &&
> +
> +	git replay --ref-action=print --linearize \
> +		--onto A B..refs/heads/N >out &&
> +
> +	test_line_count = 1 out &&
> +	read N1 N2 N3 N4 <out &&
> +
> +	cat >expect <<-EOF &&
> +	* N-child
> +	* I
> +	* L
> +	o A
> +	EOF
> +	git log --format=%s --graph --boundary A...$N3 >actual &&
> +	test_cmp expect actual
> +'

Perhaps we would want to have a test that replays all the way down
to the root commit?

Re: [PATCH 3/3] replay: offer an option to linearize the commit topology

[Toon Claes]

Junio C Hamano <gitster@pobox.com> writes:

> Toon Claes <toon@iotcl.com> writes:
>
>> From: Johannes Schindelin <Johannes.Schindelin@gmx.de>
>>
>> One of the stated goals of git-replay(1) is to allow implementing the
>> git-rebase(1) functionality on the server side.
>>
>> The default mode of git-rebase(1) is to act as if `--no-rebase-merges`
>> was given. This mode drops merge commits instead of replaying them, and
>> linearized the commit history into a sequence of the
>> regular (single-parent) commits.
>
> "linearized" -> "linearizes"?

Thanks.

>>
>> Add option `--linearize` to git-replay(1) do the same.
>
> "do the same" -> "to do the same"?

Ack.

>> Co-authored-by: Toon Claes <toon@iotcl.com>
>
> There is no sign-off by any of the authors?

My bad. I'll add mine.

@Johannes, can I re-add yours? I've removed it because I've made some
changes on top of the patch you wrote, but if you agree, I'll add your
Sign-off back.

>> @@ -430,12 +435,20 @@ int replay_revisions(struct rev_info *revs,
>>  	while ((commit = get_revision(revs))) {
>>  		const struct name_decoration *decoration;
>>  
>> -		if (commit->parents && commit->parents->next)
>> +		if (opts->linearize && (!commit->parents || commit->parents->next))
>> +			; /* map current commit to the same as the previous commit */
>
> This uses the same treatment on either root commits or merge
> commits?  If this were a mistake and this wants to handle merges but
> not roots, shouldn't it be more like
>
> 		if (opts->linearize && (commit->parents && commit->parents->next))
> 			; /* map the merge to the previous */
>
>> +		else if (commit->parents && commit->parents->next)
>>  			die(_("replaying merge commits is not supported yet!"));
>
> And because the next one is also about merges, perhaps the early
> part of this if/else if cascade can be written
>
> 		if (commit->parents && commit->parents->next) {
> 			/* We have a merge */
> 			if (!opts->linearize)
> 				die(_("can't replay a merge (yet)"));
> 			; /* map current to the previous */
> 		} else {
> 			...
>
> wouldn't it?

The way it was written in v1 was maybe a bit too smart and hard to
follow. I agree with your suggestion and will adopt this (with some
tweaks) in the next version.

> If the "map current to prev" is applicable to root, any root are
> mapped to the last_commit in the above, and if we saw a root as the
> first thing in the loop, last_commit is NULL, we do not do anything
> here, and after the if/else if/else cascade, we see last_commit is
> NULL and break out of the loop.

Yes, good observation. I did not test this.

> Perhaps we would want to have a test that replays all the way down
> to the root commit?

I'll add it.

-- 
Cheers,
Toon

[PATCH v2 0/3] Teach git-replay(1) to linearize merge commits

[Toon Claes]

As an alternative to dscho's patch series to replay merges[1], add
option to git-replay(1) to linearize merges. This mimics wath
git-rebase(1) does too with --no-rebase-merges (the default).

The first two patches do some refactoring. The third patch implements
the actual change. I was kindly helped by dscho to implement this
change.

The --linearize option is only added to git-replay(1) and not to
git-history(1) because in my opinion doesn't make much sense to do so,
but I'm happy to hear if anyone disagrees.

This series might conflict with Kristoffer's series to make
documentation changes[2], but should be trivial to resolve. And I don't
think there's a conflict with Patrick's series on adding "drop" to
git-history(1)[3].

dscho's series to replay merges[1] need a bit of rework to fit on top of
this, but I'm happy to help figuring that out. We've been discussing to
either name the option --flatten or --linearize, but I've decided on
"linearize" because the documentation of git-rebase(1) also mentions
"linearize".

[1]: <pull.2106.git.1778107405.gitgitgadget@gmail.com>
[2]: <V2_CV_doc_replay_config.767@msgid.xyz>
[3]: <20260603-b4-pks-history-drop-v2-0-742cb5b5176d@pks.im>

Signed-off-by: Toon Claes <toon@iotcl.com>
---
Changes in v2:
- Restructured the conditions to detect merge commits and added a line
  of comment why the loop continues.
- Rewrote tests to use the history from the setup step and added a few
  test cases.
- Re-added Johannes's Signed-off-by trailer. Johannes gave me the
  patches with this trailer, and if I understand correctly, I can keep
  it. Please let me know if that wrong.
- Link to v1: https://patch.msgid.link/20260608-toon-git-replay-drop-merges-v1-0-e3ee71fce7b4@iotcl.com

---
Johannes Schindelin (1):
      replay: offer an option to linearize the commit topology

Toon Claes (2):
      replay: refactor enum replay_mode into a bool
      replay: add helper to put entry into mapped_commits

 Documentation/git-replay.adoc |   5 ++
 builtin/replay.c              |   4 ++
 replay.c                      | 114 ++++++++++++++++++++++++------------------
 replay.h                      |   5 ++
 t/t3650-replay-basics.sh      |  26 ++++++++++
 5 files changed, 105 insertions(+), 49 deletions(-)

Range-diff versus v1:

1:  7f3bc6f425 ! 1:  0975b142e3 replay: refactor enum replay_mode into a bool
    @@ Commit message
     
          - The value `REPLAY_MODE_REVERT` is used when option `--revert` is
            passed to git-replay(1). When using this value the commits are
    -       possible in reverse order and the inverse of the changes are applied.
    +       processed in reverse order and the inverse of the changes are
    +       applied.
     
          - The value `REPLAY_MODE_PICK` is used when either option `--onto` or
    -       `--advance` is used. In both cases the commits are pocessed in normal
    -       order, and the changes are applied as-is.
    +       `--advance` is used. In both cases the commits are processed in
    +       normal order, and the changes are applied as-is.
     
         Since there are only two possible values of this enum, simplify the code
    -    by converting the enum into a bool. This avoid adding code paths that
    -    check for invalid vaues of the enum, and shortens code where the value
    +    by converting the enum into a bool. This avoids adding code paths that
    +    check for invalid values of the enum, and shortens code where the value
         is checked with a ternary operator.
     
         Signed-off-by: Toon Claes <toon@iotcl.com>
2:  0868871c78 ! 2:  db88193624 replay: add helper to put entry into mapped_commits
    @@ Commit message
         replay: add helper to put entry into mapped_commits
     
         The function replay_revisions() in replay.c is rather lengthy. Extract
    -    the logic to put commit entry into mapped_commits into a helper
    -    function.
    +    the logic to put a commit entry into mapped_commits into a helper
    +    function put_mapped_commit().
    +
    +    While at it, rename mapped_commit() to get_mapped_commit() to pair with
    +    this new function.
     
         Signed-off-by: Toon Claes <toon@iotcl.com>
     
3:  a432ae753b ! 3:  d0c220ec8e replay: offer an option to linearize the commit topology
    @@ Commit message
     
         The default mode of git-rebase(1) is to act as if `--no-rebase-merges`
         was given. This mode drops merge commits instead of replaying them, and
    -    linearized the commit history into a sequence of the
    +    linearizes the commit history into a sequence of the
         regular (single-parent) commits.
     
    -    Add option `--linearize` to git-replay(1) do the same.
    +    Add option `--linearize` to git-replay(1) to do the same.
     
         Co-authored-by: Toon Claes <toon@iotcl.com>
    +    Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
    +    Signed-off-by: Toon Claes <toon@iotcl.com>
     
      ## Documentation/git-replay.adoc ##
     @@ Documentation/git-replay.adoc: incompatible with `--contained` (which is a modifier for `--onto` only).
    @@ replay.c: int replay_revisions(struct rev_info *revs,
      		const struct name_decoration *decoration;
      
     -		if (commit->parents && commit->parents->next)
    -+		if (opts->linearize && (!commit->parents || commit->parents->next))
    -+			; /* map current commit to the same as the previous commit */
    -+		else if (commit->parents && commit->parents->next)
    - 			die(_("replaying merge commits is not supported yet!"));
    -+		else {
    +-			die(_("replaying merge commits is not supported yet!"));
    ++		if (commit->parents && commit->parents->next) {
    ++			if (!opts->linearize)
    ++				die(_("replaying merge commits is not supported yet!"));
    ++			/*
    ++			 * When linearizing, a merge commit itself is not picked,
    ++			 * but refs that point to it might need updating.
    ++			 */
    ++		} else {
     +			struct commit *to_pick = reverse ? last_commit : onto;
     +			last_commit =
     +				pick_regular_commit(revs->repo, commit,
    @@ t/t3650-replay-basics.sh: test_expect_success '--onto with --ref rejects multipl
      	test_grep "cannot be used with multiple revision ranges" err
      '
      
    -+test_expect_success 'linearize the commit topology' '
    -+	test_tick &&
    -+	N=$(git commit-tree -m N -p L -p I L:) &&
    -+	N=$(git commit-tree -m N-child -p $N L:) &&
    -+	git update-ref refs/heads/N $N &&
    ++test_expect_success 'replay merge commit fails' '
    ++	echo "fatal: replaying merge commits is not supported yet!" >expect &&
    ++	test_must_fail git replay --ref-action=print --onto main I..P 2>actual &&
    ++	test_cmp expect actual
    ++'
    ++
    ++test_expect_success 'replay to rebase merge commit with --linearize' '
    ++	git replay --ref-action=print --linearize --onto main I..topic-with-merge >result &&
    ++
    ++	test_line_count = 1 result &&
    ++
    ++	git log --format=%s $(cut -f 3 -d " " result) >actual &&
    ++	test_write_lines O N J M L B A >expect &&
    ++	test_cmp expect actual
    ++'
     +
    -+	git replay --ref-action=print --linearize \
    -+		--onto A B..refs/heads/N >out &&
    ++test_expect_success 'replay to rebase merge commit with --linearize down to root commit' '
    ++	git replay --ref-action=print --linearize --onto main A..topic-with-merge >result &&
     +
    -+	test_line_count = 1 out &&
    -+	read N1 N2 N3 N4 <out &&
    ++	test_line_count = 1 result &&
     +
    -+	cat >expect <<-EOF &&
    -+	* N-child
    -+	* I
    -+	* L
    -+	o A
    -+	EOF
    -+	git log --format=%s --graph --boundary A...$N3 >actual &&
    ++	git log --format=%s $(cut -f 3 -d " " result) >actual &&
    ++	test_write_lines O N J I M L B A >expect &&
     +	test_cmp expect actual
     +'
     +


---
base-commit: 9ac3f193c05c2237e2b14ebaa1149e9fc8a1abe0
change-id: 20260604-toon-git-replay-drop-merges-807fa008d395

[PATCH v2 1/3] replay: refactor enum replay_mode into a bool

[Toon Claes]

In 2760ee4983 (replay: add --revert mode to reverse commit changes,
2026-03-26) the enum `replay_mode` was introduced. This has two possible
values:

 - The value `REPLAY_MODE_REVERT` is used when option `--revert` is
   passed to git-replay(1). When using this value the commits are
   processed in reverse order and the inverse of the changes are
   applied.

 - The value `REPLAY_MODE_PICK` is used when either option `--onto` or
   `--advance` is used. In both cases the commits are processed in
   normal order, and the changes are applied as-is.

Since there are only two possible values of this enum, simplify the code
by converting the enum into a bool. This avoids adding code paths that
check for invalid values of the enum, and shortens code where the value
is checked with a ternary operator.

Signed-off-by: Toon Claes <toon@iotcl.com>
---
 replay.c | 59 +++++++++++++++++++++++++----------------------------------
 1 file changed, 25 insertions(+), 34 deletions(-)

diff --git a/replay.c b/replay.c
index 4ef8abb607..1f8e5b083b 100644
--- a/replay.c
+++ b/replay.c
@@ -18,11 +18,6 @@
  */
 #define the_repository DO_NOT_USE_THE_REPOSITORY
 
-enum replay_mode {
-	REPLAY_MODE_PICK,
-	REPLAY_MODE_REVERT,
-};
-
 static const char *short_commit_name(struct repository *repo,
 				     struct commit *commit)
 {
@@ -81,7 +76,7 @@ static struct commit *create_commit(struct repository *repo,
 				    struct tree *tree,
 				    struct commit *based_on,
 				    struct commit *parent,
-				    enum replay_mode mode)
+				    bool reverse)
 {
 	struct object_id ret;
 	struct object *obj = NULL;
@@ -98,15 +93,13 @@ static struct commit *create_commit(struct repository *repo,
 
 	commit_list_insert(parent, &parents);
 	extra = read_commit_extra_headers(based_on, exclude_gpgsig);
-	if (mode == REPLAY_MODE_REVERT) {
+	if (reverse) {
 		generate_revert_message(&msg, based_on, repo);
 		/* For revert, use current user as author (NULL = use default) */
-	} else if (mode == REPLAY_MODE_PICK) {
+	} else {
 		find_commit_subject(message, &orig_message);
 		strbuf_addstr(&msg, orig_message);
 		author = get_author(message);
-	} else {
-		BUG("unexpected replay mode %d", mode);
 	}
 	reset_ident_date();
 	if (commit_tree_extended(msg.buf, msg.len, &tree->object.oid, parents,
@@ -269,7 +262,7 @@ static struct commit *pick_regular_commit(struct repository *repo,
 					  struct commit *onto,
 					  struct merge_options *merge_opt,
 					  struct merge_result *result,
-					  enum replay_mode mode,
+					  bool reverse,
 					  enum replay_empty_commit_action empty)
 {
 	struct commit *base, *replayed_base;
@@ -287,7 +280,21 @@ static struct commit *pick_regular_commit(struct repository *repo,
 	replayed_base_tree = repo_get_commit_tree(repo, replayed_base);
 	pickme_tree = repo_get_commit_tree(repo, pickme);
 
-	if (mode == REPLAY_MODE_PICK) {
+	if (reverse) {
+		/* Revert: swap base and pickme to reverse the diff */
+		const char *pickme_name = short_commit_name(repo, pickme);
+		merge_opt->branch1 = short_commit_name(repo, replayed_base);
+		merge_opt->branch2 = xstrfmt("parent of %s", pickme_name);
+		merge_opt->ancestor = pickme_name;
+
+		merge_incore_nonrecursive(merge_opt,
+					  pickme_tree,
+					  replayed_base_tree,
+					  base_tree,
+					  result);
+
+		free((char *)merge_opt->branch2);
+	} else {
 		/* Cherry-pick: normal order */
 		merge_opt->branch1 = short_commit_name(repo, replayed_base);
 		merge_opt->branch2 = short_commit_name(repo, pickme);
@@ -303,22 +310,6 @@ static struct commit *pick_regular_commit(struct repository *repo,
 					  result);
 
 		free((char *)merge_opt->ancestor);
-	} else if (mode == REPLAY_MODE_REVERT) {
-		/* Revert: swap base and pickme to reverse the diff */
-		const char *pickme_name = short_commit_name(repo, pickme);
-		merge_opt->branch1 = short_commit_name(repo, replayed_base);
-		merge_opt->branch2 = xstrfmt("parent of %s", pickme_name);
-		merge_opt->ancestor = pickme_name;
-
-		merge_incore_nonrecursive(merge_opt,
-					  pickme_tree,
-					  replayed_base_tree,
-					  base_tree,
-					  result);
-
-		free((char *)merge_opt->branch2);
-	} else {
-		BUG("unexpected replay mode %d", mode);
 	}
 	merge_opt->ancestor = NULL;
 	merge_opt->branch2 = NULL;
@@ -341,7 +332,7 @@ static struct commit *pick_regular_commit(struct repository *repo,
 		}
 	}
 
-	return create_commit(repo, result->tree, pickme, replayed_base, mode);
+	return create_commit(repo, result->tree, pickme, replayed_base, reverse);
 }
 
 void replay_result_release(struct replay_result *result)
@@ -381,13 +372,13 @@ int replay_revisions(struct rev_info *revs,
 	char *revert;
 	const char *ref;
 	struct object_id old_oid;
-	enum replay_mode mode = REPLAY_MODE_PICK;
+	bool reverse;
 	int ret;
 
 	advance = xstrdup_or_null(opts->advance);
 	revert = xstrdup_or_null(opts->revert);
-	if (revert)
-		mode = REPLAY_MODE_REVERT;
+	reverse = !!revert;
+
 	set_up_replay_mode(revs->repo, &revs->cmdline, opts->onto,
 			   &detached_head, &advance, &revert, &onto, &update_refs);
 
@@ -430,8 +421,8 @@ int replay_revisions(struct rev_info *revs,
 			die(_("replaying merge commits is not supported yet!"));
 
 		last_commit = pick_regular_commit(revs->repo, commit, replayed_commits,
-						  mode == REPLAY_MODE_REVERT ? last_commit : onto,
-						  &merge_opt, &result, mode, opts->empty);
+						  reverse ? last_commit : onto,
+						  &merge_opt, &result, reverse, opts->empty);
 		if (!last_commit)
 			break;
 

-- 
2.53.0.1323.g189a785ab5

[PATCH v2 2/3] replay: add helper to put entry into mapped_commits

[Toon Claes]

The function replay_revisions() in replay.c is rather lengthy. Extract
the logic to put a commit entry into mapped_commits into a helper
function put_mapped_commit().

While at it, rename mapped_commit() to get_mapped_commit() to pair with
this new function.

Signed-off-by: Toon Claes <toon@iotcl.com>
---
 replay.c | 31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/replay.c b/replay.c
index 1f8e5b083b..7921d7dba3 100644
--- a/replay.c
+++ b/replay.c
@@ -243,9 +243,9 @@ static void set_up_replay_mode(struct repository *repo,
 	strset_clear(&rinfo.positive_refs);
 }
 
-static struct commit *mapped_commit(kh_oid_map_t *replayed_commits,
-				    struct commit *commit,
-				    struct commit *fallback)
+static struct commit *get_mapped_commit(kh_oid_map_t *replayed_commits,
+					struct commit *commit,
+					struct commit *fallback)
 {
 	khint_t pos;
 	if (!commit)
@@ -256,6 +256,21 @@ static struct commit *mapped_commit(kh_oid_map_t *replayed_commits,
 	return kh_value(replayed_commits, pos);
 }
 
+static void put_mapped_commit(kh_oid_map_t *replayed_commits,
+			      struct commit *commit,
+			      struct commit *new_commit)
+{
+	khint_t pos;
+	int ret;
+
+	pos = kh_put_oid_map(replayed_commits, commit->object.oid, &ret);
+	if (ret == 0)
+		BUG("Duplicate rewritten commit: %s\n",
+		    oid_to_hex(&commit->object.oid));
+
+	kh_value(replayed_commits, pos) = new_commit;
+}
+
 static struct commit *pick_regular_commit(struct repository *repo,
 					  struct commit *pickme,
 					  kh_oid_map_t *replayed_commits,
@@ -276,7 +291,7 @@ static struct commit *pick_regular_commit(struct repository *repo,
 		base_tree = lookup_tree(repo, repo->hash_algo->empty_tree);
 	}
 
-	replayed_base = mapped_commit(replayed_commits, base, onto);
+	replayed_base = get_mapped_commit(replayed_commits, base, onto);
 	replayed_base_tree = repo_get_commit_tree(repo, replayed_base);
 	pickme_tree = repo_get_commit_tree(repo, pickme);
 
@@ -414,8 +429,6 @@ int replay_revisions(struct rev_info *revs,
 	replayed_commits = kh_init_oid_map();
 	while ((commit = get_revision(revs))) {
 		const struct name_decoration *decoration;
-		khint_t pos;
-		int hr;
 
 		if (commit->parents && commit->parents->next)
 			die(_("replaying merge commits is not supported yet!"));
@@ -427,11 +440,7 @@ int replay_revisions(struct rev_info *revs,
 			break;
 
 		/* Record commit -> last_commit mapping */
-		pos = kh_put_oid_map(replayed_commits, commit->object.oid, &hr);
-		if (hr == 0)
-			BUG("Duplicate rewritten commit: %s\n",
-			    oid_to_hex(&commit->object.oid));
-		kh_value(replayed_commits, pos) = last_commit;
+		put_mapped_commit(replayed_commits, commit, last_commit);
 
 		/* Update any necessary branches */
 		if (ref)

-- 
2.53.0.1323.g189a785ab5

[PATCH v2 3/3] replay: offer an option to linearize the commit topology

[Toon Claes]

From: Johannes Schindelin <Johannes.Schindelin@gmx.de>

One of the stated goals of git-replay(1) is to allow implementing the
git-rebase(1) functionality on the server side.

The default mode of git-rebase(1) is to act as if `--no-rebase-merges`
was given. This mode drops merge commits instead of replaying them, and
linearizes the commit history into a sequence of the
regular (single-parent) commits.

Add option `--linearize` to git-replay(1) to do the same.

Co-authored-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Toon Claes <toon@iotcl.com>
---
 Documentation/git-replay.adoc |  5 +++++
 builtin/replay.c              |  4 ++++
 replay.c                      | 30 +++++++++++++++++++++++-------
 replay.h                      |  5 +++++
 t/t3650-replay-basics.sh      | 26 ++++++++++++++++++++++++++
 5 files changed, 63 insertions(+), 7 deletions(-)

diff --git a/Documentation/git-replay.adoc b/Documentation/git-replay.adoc
index a32f72aead..41c96c7061 100644
--- a/Documentation/git-replay.adoc
+++ b/Documentation/git-replay.adoc
@@ -88,6 +88,11 @@ incompatible with `--contained` (which is a modifier for `--onto` only).
 +
 The default mode can be configured via the `replay.refAction` configuration variable.
 
+--linearize::
+	In this mode, `git replay` imitates `git rebase --no-rebase-merges`,
+	i.e. it cherry-picks only non-merge commits, each one on top of the
+	previous one.
+
 <revision-range>::
 	Range of commits to replay; see "Specifying Ranges" in
 	linkgit:git-rev-parse[1]. In `--advance=<branch>` or
diff --git a/builtin/replay.c b/builtin/replay.c
index 39e3a86f6c..fedfe46dc6 100644
--- a/builtin/replay.c
+++ b/builtin/replay.c
@@ -111,6 +111,8 @@ int cmd_replay(int argc,
 			     N_("mode"),
 			     N_("control ref update behavior (update|print)"),
 			     PARSE_OPT_NONEG),
+		OPT_BOOL(0, "linearize", &opts.linearize,
+			 N_("ignore merge commits instead of replaying them")),
 		OPT_END()
 	};
 
@@ -132,6 +134,8 @@ int cmd_replay(int argc,
 				  opts.contained, "--contained");
 	die_for_incompatible_opt2(!!opts.ref, "--ref",
 				  !!opts.contained, "--contained");
+	die_for_incompatible_opt2(!!opts.revert, "--revert",
+				  opts.linearize, "--linearize");
 
 	/* Parse ref action mode from command line or config */
 	ref_mode = get_ref_action_mode(repo, ref_action);
diff --git a/replay.c b/replay.c
index 7921d7dba3..81033fb889 100644
--- a/replay.c
+++ b/replay.c
@@ -277,12 +277,16 @@ static struct commit *pick_regular_commit(struct repository *repo,
 					  struct commit *onto,
 					  struct merge_options *merge_opt,
 					  struct merge_result *result,
+					  struct commit *replayed_base,
 					  bool reverse,
 					  enum replay_empty_commit_action empty)
 {
-	struct commit *base, *replayed_base;
+	struct commit *base;
 	struct tree *pickme_tree, *base_tree, *replayed_base_tree;
 
+	if (replayed_base && reverse)
+		BUG("Linearizing commits is not supported when replaying in reverse");
+
 	if (pickme->parents) {
 		base = pickme->parents->item;
 		base_tree = repo_get_commit_tree(repo, base);
@@ -291,7 +295,8 @@ static struct commit *pick_regular_commit(struct repository *repo,
 		base_tree = lookup_tree(repo, repo->hash_algo->empty_tree);
 	}
 
-	replayed_base = get_mapped_commit(replayed_commits, base, onto);
+	if (!replayed_base)
+		replayed_base = get_mapped_commit(replayed_commits, base, onto);
 	replayed_base_tree = repo_get_commit_tree(repo, replayed_base);
 	pickme_tree = repo_get_commit_tree(repo, pickme);
 
@@ -430,12 +435,23 @@ int replay_revisions(struct rev_info *revs,
 	while ((commit = get_revision(revs))) {
 		const struct name_decoration *decoration;
 
-		if (commit->parents && commit->parents->next)
-			die(_("replaying merge commits is not supported yet!"));
+		if (commit->parents && commit->parents->next) {
+			if (!opts->linearize)
+				die(_("replaying merge commits is not supported yet!"));
+			/*
+			 * When linearizing, a merge commit itself is not picked,
+			 * but refs that point to it might need updating.
+			 */
+		} else {
+			struct commit *to_pick = reverse ? last_commit : onto;
+			last_commit =
+				pick_regular_commit(revs->repo, commit,
+						    replayed_commits, to_pick,
+						    &merge_opt, &result,
+						    opts->linearize ? last_commit : NULL,
+						    reverse, opts->empty);
+		}
 
-		last_commit = pick_regular_commit(revs->repo, commit, replayed_commits,
-						  reverse ? last_commit : onto,
-						  &merge_opt, &result, reverse, opts->empty);
 		if (!last_commit)
 			break;
 
diff --git a/replay.h b/replay.h
index 1851a07705..07e6fdcca3 100644
--- a/replay.h
+++ b/replay.h
@@ -62,6 +62,11 @@ struct replay_revisions_options {
 	 * Defaults to REPLAY_EMPTY_COMMIT_DROP.
 	 */
 	enum replay_empty_commit_action empty;
+
+	/*
+	 * Whether to linearize the commits (i.e. drop merge commits).
+	 */
+	int linearize;
 };
 
 /* This struct is used as an out-parameter by `replay_revisions()`. */
diff --git a/t/t3650-replay-basics.sh b/t/t3650-replay-basics.sh
index 3353bc4a4d..64e0731188 100755
--- a/t/t3650-replay-basics.sh
+++ b/t/t3650-replay-basics.sh
@@ -565,4 +565,30 @@ test_expect_success '--onto with --ref rejects multiple revision ranges' '
 	test_grep "cannot be used with multiple revision ranges" err
 '
 
+test_expect_success 'replay merge commit fails' '
+	echo "fatal: replaying merge commits is not supported yet!" >expect &&
+	test_must_fail git replay --ref-action=print --onto main I..P 2>actual &&
+	test_cmp expect actual
+'
+
+test_expect_success 'replay to rebase merge commit with --linearize' '
+	git replay --ref-action=print --linearize --onto main I..topic-with-merge >result &&
+
+	test_line_count = 1 result &&
+
+	git log --format=%s $(cut -f 3 -d " " result) >actual &&
+	test_write_lines O N J M L B A >expect &&
+	test_cmp expect actual
+'
+
+test_expect_success 'replay to rebase merge commit with --linearize down to root commit' '
+	git replay --ref-action=print --linearize --onto main A..topic-with-merge >result &&
+
+	test_line_count = 1 result &&
+
+	git log --format=%s $(cut -f 3 -d " " result) >actual &&
+	test_write_lines O N J I M L B A >expect &&
+	test_cmp expect actual
+'
+
 test_done

-- 
2.53.0.1323.g189a785ab5