* Recommended steps for a "subsystem maintainer" ?
From: Gary Yang @ 2008-11-19 20:47 UTC (permalink / raw)
To: git
Hi,
The doc,http://www.kernel.org/pub/software/scm/git/docs/gitcore-tutorial.html at "Working with Others" recommended steps for a "subsystem maintainer".
See below. But, I do not understand the step 3. Copy over the packed files from "project lead" public repository to your public repository.
The step 1 used git-clone. That means, I got the code including histories as well. Why do I need step 3 to get the packed files?
If I really need the packed files, how do I get it? As an example, I need to get the packed files for http://git.denx.de/?p=u-boot.git;a=summary .
How can I get the files something like, pack-d5ef1966072c86ef5108ac57525b802581de5d21.idx and pack-d5ef1966072c86ef5108ac57525b802581de5d21.pack ?
The snapshot dose not have the packed files. They are all text files.
A recommended work cycle for a "subsystem maintainer" who works on that project and has an own "public repository" goes like this:
1. Prepare your work repository, by git-clone the public repository of the "project lead". The URL used for the initial cloning
is stored in the remote.origin.url configuration variable.
2. Prepare a public repository accessible to others, just like the "project lead" person does.
3. Copy over the packed files from "project lead" public repository to your public repository, unless the "project lead" repository lives on the same machine as yours. In the latter case, you can use objects/info/alternates file to point at the repository you are borrowing from.
4. Push into the public repository from your primary repository. Run git-repack, and possibly git-prune if the transport used for pulling from your repository supports packed repositories.
5. Keep working in your primary repository. Your changes include modifications of your own, patches you receive via e-mails, and merges resulting from pulling the "public" repositories of your "project lead" and possibly your "sub-subsystem maintainers".
You can repack this private repository whenever you feel like.
6. Push your changes to your public repository, and ask your "project lead" and possibly your "sub-subsystem maintainers" to pull from it.
7. Every once in a while, git-repack the public repository. Go back to step 5. and continue working.
Thank you,
Gary
^ permalink raw reply
* [git-p4] Can't submit: Something I do in a wrong way.
From: Evgeniy Ivanov @ 2008-11-19 21:00 UTC (permalink / raw)
To: git
Hi list,
I need a help with git-p4.
There are //1, //2, //3 in perforce's depot, and /dir1 is a client's root.
So:
Root: /dir1/
//1/... //client/1... etc
I've checkouted //1, //2 and //3.
In /git I did "git clone //1; git clone //2", So I have /git/1, /git/2.
Now I run in /git/1 "git-p4 submit commitBr" and choose 'y' to sync,
where comitBr has one more commit than master.
I get "Path /git/1/... is not under client's root /dir1/". Without
syncing it says I have opened files, but when I do in /dir1/1 "p4 -a
revert" I get: "file(s) not opened on this client".
Looks like "git-p4 rebase" works fine.
Also I tried to keep git in the same dir as perforce workspace: I did 1
commit and then failed to do anything, because got strange conflicts.
P.S. Please don't forget to keep me in CC :)
--
Cheers, Evgeniy.
Key fingerprint: F316 B5A1 F6D2 054F CD18 B74A 9540 0ABB 1FE5 67A3
^ permalink raw reply
* Re: removing svn remotes
From: Matt Graham @ 2008-11-19 21:26 UTC (permalink / raw)
To: Björn Steinbrink; +Cc: git
In-Reply-To: <20081119083219.GB3538@atjola.homenet>
On Wed, Nov 19, 2008 at 03:32, Björn Steinbrink <B.Steinbrink@gmx.de> wrote:
> On 2008.11.18 20:47:24 -0500, Matt Graham wrote:
>> Hi,
>> I have a svn repo cloned into a git repo. There are several remote
>> refs that are there that I don't care about and don't want to fetch.
>>
>> git svn fetch --fetch-all gets a bunch of stuff from branches I don't want
>> git svn fetch requires I checkout the branches I care about before fetching
>>
>> git svn fetch doesn't accept a branch name
>> git remote rm isn't able to see the svn remotes
>>
>> Is there a way to either:
>> 1) get rid of the svn remotes that I don't want?
>> 2) fetch only the remotes that I do want?
>
> Uhm, are you talking about remote tracking branches (what "git branch
> -r" shows), or svn-remotes (not sure if git-svn can list them, they're
> in .git/config)?
>
> The behaviour you describe doesn't match my experience with git-svn, so
> maybe you could elaborate a bit on the exact problem?
Sorry the question was not clear.
git branch -r -d
did exactly what I need. I guess I just didn't know how to ask for
it. Another happy discovery.
Using git branch -r -d, I was able to delete my svn-remotes.
Now when I run git svn fetch --fetch-all, it appears to fetch only
from the remaining branches that I didn't delete. I hope that
clarifies it.
thank you!
^ permalink raw reply
* Re: [git-p4] Can't submit: Something I do in a wrong way.
From: Evgeniy Ivanov @ 2008-11-19 22:16 UTC (permalink / raw)
Cc: git
In-Reply-To: <49247E5D.7070601@gmail.com>
Retried and noticed that if I do:
/dir1/1> git-p4 submit --git-dir=../../git/1/ --origin=master
Then everything works fine. Strange, but docs say:
"This requires a Perforce checkout separate to your git
repository. To submit all changes that are in the current git branch but
not in
the "p4" branch (or "origin" if "p4" doesn't exist) simply call
git-p4 submit
in your git repository."
And my approach is a bit vice versa.
Any suggestions? I can go with it, but I want almost forget about thing
that I have perforce :)
Evgeniy Ivanov wrote:
> Hi list,
> I need a help with git-p4.
>
> There are //1, //2, //3 in perforce's depot, and /dir1 is a client's root.
> So:
> Root: /dir1/
> //1/... //client/1... etc
> I've checkouted //1, //2 and //3.
>
> In /git I did "git clone //1; git clone //2", So I have /git/1, /git/2.
> Now I run in /git/1 "git-p4 submit commitBr" and choose 'y' to sync,
> where comitBr has one more commit than master.
> I get "Path /git/1/... is not under client's root /dir1/". Without
> syncing it says I have opened files, but when I do in /dir1/1 "p4 -a
> revert" I get: "file(s) not opened on this client".
> Looks like "git-p4 rebase" works fine.
>
> Also I tried to keep git in the same dir as perforce workspace: I did 1
> commit and then failed to do anything, because got strange conflicts.
>
>
> P.S. Please don't forget to keep me in CC :)
>
>
--
Cheers, Evgeniy.
Key fingerprint: F316 B5A1 F6D2 054F CD18 B74A 9540 0ABB 1FE5 67A3
^ permalink raw reply
* Re: [PATCH] Retain multiple -q/-v occurrences in git pull
From: Tuncer Ayaz @ 2008-11-19 22:47 UTC (permalink / raw)
To: Constantine Plotnikov; +Cc: git, gitster
In-Reply-To: <85647ef50811190346x11aea0fay3a8a7dfd8ddf6abc@mail.gmail.com>
On Wed, Nov 19, 2008 at 12:46 PM, Constantine Plotnikov
<constantine.plotnikov@gmail.com> wrote:
> On Tue, Nov 18, 2008 at 1:09 AM, Tuncer Ayaz <tuncer.ayaz@gmail.com> wrote:
>> To support counting -q/-v options in git pull retain
>> them by concatenating.
>>
> [rest of message cut]
>
> By the way, there is yet another way to invoke git fetch. It is "git
> remote update". Possibly it should support "-v" and "-q" options for
> consistency as well.
Yes, we could add -q to builtin-remote and also make sure that it
passes the already existing -v and maybe a yet-to-be-added -q to
the fetch command.
I want to be first sure what the overall strategy regarding -q/-v is.
Right now we have some code which uses OPT__VERBOSE/OPT__QUIET
and some new code which uses the newly-added OPT__VERBOSITY.
These are the options I can see:
1) Use the old and new macros and decide in each module which one to use
2) Get rid off OPT__VERBOSE and OPT__QUIET and use OPT__VERBOSITY only
3) Think about new ways to handle all of this. Possibly some new print_* macros?
Any opinions?
^ permalink raw reply
* Re: [PATCH] Retain multiple -q/-v occurrences in git pull
From: Tuncer Ayaz @ 2008-11-19 23:00 UTC (permalink / raw)
To: Constantine Plotnikov; +Cc: Junio C Hamano, git
In-Reply-To: <4ac8254d0811191458r2a205be3w4a412553edc9b07f@mail.gmail.com>
[re-sent due to propagated wrong Junio address. sorry.]
On Wed, Nov 19, 2008 at 12:46 PM, Constantine Plotnikov
<constantine.plotnikov@gmail.com> wrote:
> On Tue, Nov 18, 2008 at 1:09 AM, Tuncer Ayaz <tuncer.ayaz@gmail.com> wrote:
>> To support counting -q/-v options in git pull retain
>> them by concatenating.
>>
> [rest of message cut]
>
> By the way, there is yet another way to invoke git fetch. It is "git
> remote update". Possibly it should support "-v" and "-q" options for
> consistency as well.
Yes, we could add -q to builtin-remote and also make sure that it
passes the already existing -v and maybe a yet-to-be-added -q to
the fetch command.
I want to be first sure what the overall strategy regarding -q/-v is.
Right now we have some code which uses OPT__VERBOSE/OPT__QUIET
and some new code which uses the newly-added OPT__VERBOSITY.
These are the options I can see:
1) Use the old and new macros and decide in each module which one to use
2) Get rid off OPT__VERBOSE and OPT__QUIET and use OPT__VERBOSITY only
3) Think about new ways to handle all of this. Possibly some new print_* macros?
Any opinions?
^ permalink raw reply
* Re: Git commit won't add an untracked file given on the command line
From: Junio C Hamano @ 2008-11-19 23:07 UTC (permalink / raw)
To: Daniel Barkalow; +Cc: Johannes Schindelin, Mark Burton, git
In-Reply-To: <alpine.LNX.1.00.0811191247560.19665@iabervon.org>
Daniel Barkalow <barkalow@iabervon.org> writes:
> I don't think that's what Mark wants, in this case. He's looking for the
> ability to have "git commit" act on a temporary index created by adding to
> the parent commit explicitly named files which aren't in the non-temporary
> index.
Ah, I think that it would not be an entirely unreasonable thing to do
(cf. Message-Id: <7vtza4trdp.fsf@gitster.siamese.dyndns.org>).
You can say "git add that/directory" and .gitignore mechanism protects you
from crufts in that/directory, so fearing "git commit that/directory" to
add random junk to the next commit is not a reason to fear it.
But that is a huge behaviour change. For example, I have a handful test
scripts in my t/ directory (all named following the usual t????-*.sh
naming convention) that I do not want to commit. Today, after making
changes to the tracked test scripts, I can rely on "git commit t/" not to
include them in the commit, and I've _learned_ to trust that behaviour.
I'd be surprised if others who have used git for more than a few months
haven't done so as well.
Allowing what Mark wants without any explicit user customization will be a
disaster to the end user experience.
^ permalink raw reply
* Re: Git commit won't add an untracked file given on the command line
From: Mark Burton @ 2008-11-19 23:30 UTC (permalink / raw)
To: Junio C Hamano; +Cc: Daniel Barkalow, Johannes Schindelin, git
In-Reply-To: <7v7i6zs4ay.fsf@gitster.siamese.dyndns.org>
Hi,
> Allowing what Mark wants without any explicit user customization will be a
> disaster to the end user experience.
If the ability to commit a currently untracked file/tree whilst
preserving the index is really worth having (and that's debatable, as
the git user community has survived until now without that capability)
then another option (say, -O) could be added to git-commit that does
what -o does but allows untracked files/trees to be specified - that
way, the current behaviour would remain unchanged and the above
mentioned disaster averted.
Cheers,
Mark
^ permalink raw reply
* Re: Git commit won't add an untracked file given on the command line
From: Junio C Hamano @ 2008-11-19 23:51 UTC (permalink / raw)
To: Mark Burton; +Cc: Daniel Barkalow, Johannes Schindelin, git
In-Reply-To: <20081119233027.17687dd5@crow>
Mark Burton <markb@ordern.com> writes:
>> Allowing what Mark wants without any explicit user customization will be a
>> disaster to the end user experience.
>
> If the ability to commit a currently untracked file/tree whilst
> preserving the index is really worth having (and that's debatable, as
> the git user community has survived until now without that capability)
> then another option (say, -O) could be added to git-commit that does
> what -o does but allows untracked files/trees to be specified - that
> way, the current behaviour would remain unchanged and the above
> mentioned disaster averted.
Heh, I apparently failed to convey what I wanted to say with "without any
explicit user customization" part of my message. IOW, I think you are
saying the same thing as what I wanted to say from the opposite angle.
^ permalink raw reply
* Re: Git commit won't add an untracked file given on the command line
From: Daniel Barkalow @ 2008-11-19 23:52 UTC (permalink / raw)
To: Junio C Hamano; +Cc: Johannes Schindelin, Mark Burton, git
In-Reply-To: <7v7i6zs4ay.fsf@gitster.siamese.dyndns.org>
On Wed, 19 Nov 2008, Junio C Hamano wrote:
> Daniel Barkalow <barkalow@iabervon.org> writes:
>
> > I don't think that's what Mark wants, in this case. He's looking for the
> > ability to have "git commit" act on a temporary index created by adding to
> > the parent commit explicitly named files which aren't in the non-temporary
> > index.
>
> Ah, I think that it would not be an entirely unreasonable thing to do
> (cf. Message-Id: <7vtza4trdp.fsf@gitster.siamese.dyndns.org>).
>
> You can say "git add that/directory" and .gitignore mechanism protects you
> from crufts in that/directory, so fearing "git commit that/directory" to
> add random junk to the next commit is not a reason to fear it.
>
> But that is a huge behaviour change. For example, I have a handful test
> scripts in my t/ directory (all named following the usual t????-*.sh
> naming convention) that I do not want to commit. Today, after making
> changes to the tracked test scripts, I can rely on "git commit t/" not to
> include them in the commit, and I've _learned_ to trust that behaviour.
> I'd be surprised if others who have used git for more than a few months
> haven't done so as well.
>
> Allowing what Mark wants without any explicit user customization will be a
> disaster to the end user experience.
There are two possible limits that would preserve your case while handling
Mark's case: one is to only look at untracked files at all for names that
don't match any tracked files, and the other (independantly) is to treat
names as single filenames instead of patterns for untracked files.
Either of these (or both) should keep the existing behavior for using a
pattern on the command line as a filter for which of the tracked files to
commit (since any pattern of tracked files won't be the name of an
individual untracked file).
-Daniel
*This .sig left intentionally blank*
^ permalink raw reply
* Re: Git commit won't add an untracked file given on the command line
From: Junio C Hamano @ 2008-11-20 0:36 UTC (permalink / raw)
To: Daniel Barkalow; +Cc: Johannes Schindelin, Mark Burton, git
In-Reply-To: <alpine.LNX.1.00.0811191809430.19665@iabervon.org>
Daniel Barkalow <barkalow@iabervon.org> writes:
> There are two possible limits that would preserve your case while handling
> Mark's case: one is to only look at untracked files at all for names that
> don't match any tracked files, and the other (independantly) is to treat
> names as single filenames instead of patterns for untracked files.
>
> Either of these (or both) should keep the existing behavior for using a
> pattern on the command line as a filter for which of the tracked files to
> commit (since any pattern of tracked files won't be the name of an
> individual untracked file).
Perhaps. I am starting to think that "Did you forget to 'git add'?" is
actually the best behaviour we can have ;-)
^ permalink raw reply
* git-status for submodules
From: Chris Frey @ 2008-11-20 3:36 UTC (permalink / raw)
To: git
Hi,
I'm using git 1.6.0.4 and trying to make submodules work for me. The
init/add/update steps are a bit tedious, but workable. The problem I have
is when I make a change in a submodule, then git-status does not show
the change.
For example, assuming a directory structure like: super and super/sub
cd super
vi newsuper
vi existing_file
cd sub
vi newsub
cd ..
git status
This will show newsuper as needing to be added, and existing_file as changed,
but newsub will not appear.
Is there a way to accomplish this?
Thanks,
- Chris
^ permalink raw reply
* Re: Git commit won't add an untracked file given on the command line
From: Miles Bader @ 2008-11-20 5:06 UTC (permalink / raw)
To: Johannes Schindelin; +Cc: Mark Burton, Francis Galiegue, git
In-Reply-To: <alpine.DEB.1.00.0811191036340.30769@pacific.mpi-cbg.de>
Johannes Schindelin <Johannes.Schindelin@gmx.de> writes:
>> I use the staging area a lot, so I think I have a pretty clear idea of
>> what it's "about", but I also often use "commit FILE" or "commit -a" for
>> simple cases; even when splitting a change into multiple commits, it's
>> often more convenient to do "commit FILE..." instead of "add FILE;
>> commit".
>
> What I meant was this: the "commit <file>" paradigm is not what you should
> do most of the time. In order to work with the staging area efficiently,
> you should make staging and committing two separate steps.
>
> So my point is this: stage first, verify, then commit. That saves you a
> lot of embarrassment.
You seem to be saying that you think that using staging area explicitly
is necessary or somehow "more efficient" for making good commits, but on
the face of it, that's simply not true.
I'm extremely careful about committing clean changes, and do a lot of
testing and pre-commit diffing. For complex changes which need to be
split, the staging area is indeed a very useful tool, and I'm very glad
git has it -- but it's hardly necessary for _all_ commits, and my
experience is that in practice, many commits are indeed the simple sort
which for which it's superfluous. My goal is not to "work with the
staging area efficiently", it's to "make good/clean/tested commits,
efficiently".
Obviously this depends on work style, and subject matter. Sometimes one
_needs_ to make biggish changes and split them for commiting, and some
people like to use that work style even when it's not strictly
necessary. Other times, changes are more obviously independent, and can
be done, tested, and commited in a serial fashion without any splitting.
Perhaps, given your work style or the type of work you, you use the
staging area 99% of the time. For your case, maybe any git features
which bypass the staging area are simply unneeded complexity. However,
my own experience suggests that this is not universally true. I'd say I
use the staging area for maybe 50% of commits.
One of the nice thing about git is the way that it tries to cater to
multiple work styles, so it seems wrong to reject a useful feature
simply because you want to "encourage" people to use your preferred work
style, when that work style is not obviously better. [Of course there
can be other good reasons to reject this feature -- maybe it's too
dangerous or mucks up the code.]
> I regularly encounter people who never call "git diff --cached" before
> committing, and guess who introduces all kinds of debug statements and
> other cruft into their commits? Exactly.
[I'm not sure what the point of that was... for the record, no I'm not
one of "those people". When I use the staging area, I use "git diff
--cached"; when I don't use the staging area, I "git diff" instead...]
-Miles
--
Bacchus, n. A convenient deity invented by the ancients as an excuse for
getting drunk.
^ permalink raw reply
* [PATCH] Fix misleading wording for git-cherry-pick
From: Bryan Drewery @ 2008-11-20 5:11 UTC (permalink / raw)
To: gitster; +Cc: git
Documentation for -n implies that -x is normally
used, however this is no longer true.
Signed-off-by: Bryan Drewery <bryan@shatow.net>
---
Documentation/git-cherry-pick.txt | 13 ++++++-------
1 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/Documentation/git-cherry-pick.txt
b/Documentation/git-cherry-pick.txt
index 837fb08..b764130 100644
--- a/Documentation/git-cherry-pick.txt
+++ b/Documentation/git-cherry-pick.txt
@@ -55,13 +55,12 @@ OPTIONS
-n::
--no-commit::
- Usually the command automatically creates a commit with
- a commit log message stating which commit was
- cherry-picked. This flag applies the change necessary
- to cherry-pick the named commit to your working tree
- and the index, but does not make the commit. In addition,
- when this option is used, your index does not have to match
- the HEAD commit. The cherry-pick is done against the
+ Usually the command automatically creates a commit.
+ This flag applies the change necessary to cherry-pick
+ the named commit to your working tree and the index,
+ but does not make the commit. In addition, when this
+ option is used, your index does not have to match the
+ HEAD commit. The cherry-pick is done against the
beginning state of your index.
+
This is useful when cherry-picking more than one commits'
--
1.5.6.4
^ permalink raw reply related
* git-svn confused by "empty" (svn prop change) commit
From: paulfred @ 2008-11-20 3:11 UTC (permalink / raw)
To: git
I've been using git and git-svn to commit to a central SVN repository for
the last several months. It's been working great so far, well enough that
I really, *really* don't want to go back.
But yesterday, someone committed a number of changes to svn:properties,
and there were no tree changes. git-svn now fails to dcommit anything,
instead giving me the following output:
$ git svn dcommit
Committing to https://project.com/svn/trunk ...
No changes
68af7eb26504e324cd6e3a2d50cd0562852a2dca~1 == 68af7eb26504e324cd6e3a2d50cd0562852a2dca
W: 68af7eb26504e324cd6e3a2d50cd0562852a2dca and refs/remotes/trunk differ, using rebase:
:040000 040000 7d76021c10cebf4a0b5c8fdf614bec8e66734a28 197442c7bd8c29cdd11f52ffb18fbd882d1c7f50 M eu
Current branch master is up to date.
# of revisions changed
before:
683a4ed53d8859f184733eaeebc6fcb904aa1e3b
10e85dc1c3b03b77dcabb53b26893b2d30bd56c5
07c1f476b6a5feae410e315cae57d878e898896d
27aad097ace7ec5db128032f29d775791463ddc7
[...several commits omitted...]
751e53e536c98bf9ee1bd8b876c56f06f6b6b059
after:
68af7eb26504e324cd6e3a2d50cd0562852a2dca
683a4ed53d8859f184733eaeebc6fcb904aa1e3b
10e85dc1c3b03b77dcabb53b26893b2d30bd56c5
07c1f476b6a5feae410e315cae57d878e898896d
27aad097ace7ec5db128032f29d775791463ddc7
[...all the same commits again omitted...]
751e53e536c98bf9ee1bd8b876c56f06f6b6b059
If you are attempting to commit merges, try running:
git rebase --interactive --preserve-merges refs/remotes/trunk
Before dcommitting
It's strange that it wanted to rebase, since I had already rebased on top of
remotes/trunk, and I have exactly one commit I'm trying to dcommit. After
rebasing, it appears to bail because 68af7e is in one list and not the other.
Well, 68af7e happens to be the commit with no tree changes, only svn property
changes. And yet "git branch --contains 68af7e" output includes master. (hmm,
but not remotes/trunk. Shouldn't it? master^ == remotes/trunk)
Anyway, git svn rebase continues to pull in new changes from everyone else,
but won't dcommit mine.
Based on a suggestion from irc, I tried --no-rebase, and got:
Attempting to commit more than one change while --no-rebase is enabled.
If these changes depend on each other, re-running without --no-rebase may be required. at /usr/local/libexec/git-core/git-svn line 447.
No changes
68af7eb26504e324cd6e3a2d50cd0562852a2dca~1 == 68af7eb26504e324cd6e3a2d50cd0562852a2dca
Unable to extract revision information from commit 683a4ed53d8859f184733eaeebc6fcb904aa1e3b~1
But I don't know what to do with that error message. Is it looking for the git-svn-id's?
Other (perhaps important) details: I created the repository several months
ago,and only recently put "[svn] noMetadata = true" in my config file because
I'm the only person on the team using git, and nobody else wanted to see the
git-svn-id messages.
This is git version 1.6.0.4.761.g47577 on OS X 10.5.
I suppose I could nuke everything and clone another shallow copy of the code
from some point after the bad commit, but I'd be happy with any kind of
work around that gets me dcommitting again.
Thanks!
--Paul
^ permalink raw reply
* Re: Git.pm
From: Petr Baudis @ 2008-11-20 8:34 UTC (permalink / raw)
To: nadim khemir; +Cc: git
In-Reply-To: <200811191856.44252.nadim@khemir.net>
Hi,
On Wed, Nov 19, 2008 at 06:56:44PM +0100, nadim khemir wrote:
> Hi, I'm new on this mailing list and quite new to git too. I named on irc that
> I develop mainly in Perl (http://search.cpan.org/~nkh/) when I do open
> source. I heard that Git.pm needed some love and I can take over its
> maintenance if there are things that need to be done.
>
> I need to know:
>
> - what needs to be done
> - who was doing maintenanace before
> - how do you want to release it (perl modules are best placed on CPAN
> (too))
> - what (and who) is depending on Git.pm
> - what would be expected of me
I know it's quite some time since you wrote this mail originally -
have you read the Lea's thread I have recommended? What is your current
plan?
I think the current rough consensus in the Git community is to go with
Lea's design and implementation after extending it with a nice way to
run arbitrary Git commands. This is also desirable since then we can use
her patches to make gitweb use Git.pm.
--
Petr "Pasky" Baudis
People who take cold baths never have rheumatism, but they have
cold baths.
^ permalink raw reply
* Re: git and mtime
From: Andreas Ericsson @ 2008-11-20 8:38 UTC (permalink / raw)
To: Matthias Kestenholz; +Cc: Roger Leigh, git
In-Reply-To: <C33ABF98-2E52-4928-BF79-CB3B6A8460DB@feinheit.ch>
Matthias Kestenholz wrote:
> Hi,
>
> On 19.11.2008, at 12:37, Roger Leigh wrote:
>
>> Hi folks,
>>
>> I'm using git to store some generated files, as well as their sources.
>> (This is in the context of Debian package development, where entire
>> upstream release tarballs are injected into an upstream branch, with
>> Debian releases merging the upstream branch, and adding the Debian
>> packaging files.)
>>
>> The upstream release tarballs contains files such as
>> - yacc/lex code, and the corresponding generated sources
>> - Docbook/XML code, and corresponding HTML/PDF documentation
>>
>> These are provided by upstream so that end users don't need these tools
>> installed (particularly docbook, since the toolchain is so flaky on
>> different systems). However, the fact that git isn't storing the
>> mtime of the files confuses make, so it then tries to regenerate these
>> (already up-to-date) files, and fails in the process since the tools
>> aren't available.
>>
>> Would it be possible for git to store the mtime of files in the tree?
>>
>
> This subject comes up from time to time, but the answer always
> stays the same: No. The trees are purely defined by their content, and
> that's by design.
>
> If you do not want to regenerate files that are already up-to-date,
> you need multiple checkouts of the same repository.
>
Or a make-rule that touches the files you know are up to date. Since you
control the build environment, that's probably the simplest solution.
--
Andreas Ericsson andreas.ericsson@op5.se
OP5 AB www.op5.se
Tel: +46 8-230225 Fax: +46 8-230231
^ permalink raw reply
* Re: git and mtime
From: Andreas Ericsson @ 2008-11-20 8:39 UTC (permalink / raw)
To: Matthieu Moy; +Cc: Arafangion, Roger Leigh, git
In-Reply-To: <vpqhc63zrz2.fsf@bauges.imag.fr>
Matthieu Moy wrote:
> Arafangion <thestar@fussycoder.id.au> writes:
>
>> You should probably fix your build script,
>
> ccache should help:
>
> http://ccache.samba.org/
>
Not for docbook/flex/yacc stuff, which is what was causing trouble.
--
Andreas Ericsson andreas.ericsson@op5.se
OP5 AB www.op5.se
Tel: +46 8-230225 Fax: +46 8-230231
^ permalink raw reply
* Re: git bisect do not work when good reversion is newer than bad reversion
From: Andreas Ericsson @ 2008-11-20 8:44 UTC (permalink / raw)
To: Junio C Hamano; +Cc: Cai, Crane, git
In-Reply-To: <7vljvfswek.fsf@gitster.siamese.dyndns.org>
Junio C Hamano wrote:
> "Cai, Crane" <Crane.Cai@amd.com> writes:
>
>> Hi Junio,
>>
>> Sorry to disturb you. Here the requirement I met can not find answer
>> from website. That's why I directly ask you.
>>
>> I need to use "git bisect" to find what patch can fix a problem.
>> I found v2.6.25 has this problem.
>> And v2.6.26 does NOT has this problem.
>>
>> Then I use bisect as this:
>>
>> #git bisect start
>> #git bisect good v2.6.26
>> #git bisect bad v2.6.25
>>
>> No reversion cut via these steps. Do you know whether git command can
>> achieve this requirement or not?
>
> You can use "git bisect" to find a single change that fixed the issue
> (_provided if_ such a single change exists). There is a small mental
> trick you need to exercise.
>
> First, realize that bisect is about "it used to be like this, but later it
> turned into that. Where did that single transition from this to that
> happened"? Usually, "this" is "had this particular bug and was broken"
> and "that" is "that bug was fixed and things work smoothly". In your
> case, however, "this" is "broken" and "that" is "fixed". IOW, the
> question you ask "bisect" is "it used to be broken but later it was fixed;
> where did that exactly happen?".
>
> The mental trick is to swap "good" and "bad" in order to adjust to your
> use, because you are using bisect in a reverse way from the usual. Usual
> case uses "good" mark "this" while "bad" is used to mark "that" in the
> sentence "it used to be like this, but later it turned into that".
>
> So what you would do is...
>
> (1) First of all, write on a piece of paper:
>
> good - the version _STILL_ has the bug.
> bad - the version does not have the bug _ANYMORE_
>
> (2) Start with "git bisect v2.6.25 v2.6.26";
>
> (3) As you test each revision, look at the memo you made. Say
> "good" if it still has the bug you are interested in; say
> "bad" if it does not have the bug anymore..
>
> cf. http://thread.gmane.org/gmane.comp.version-control.git/86063
>
Or start your bisect run with this:
git config alias.fixed "!git bisect bad"
git config alias.buggy "!git bisect good"
Then you can run "git fixed" if the bug is fixed, and "git buggy" if the
bug is present.
--
Andreas Ericsson andreas.ericsson@op5.se
OP5 AB www.op5.se
Tel: +46 8-230225 Fax: +46 8-230231
^ permalink raw reply
* Re: git workshop in Sweden/Denmark
From: Andreas Ericsson @ 2008-11-20 8:53 UTC (permalink / raw)
To: nadim khemir; +Cc: git
In-Reply-To: <200811191858.21990.nadim@khemir.net>
nadim khemir wrote:
> Hi,
>
> Lund.pm and Data-foreningen are trying to organize a 'git' workshop.
>
> The workshop will consist of a presentation in the morning followed by a lunch
> in a local restaurant and a workshop after lunch.
>
Sweet! :)
> We already have a location where the workshop will take place. Most probably
> a Saturday to allow as many people as possible to join us. The location is in
> Malmö the biggest town in the south of Sweden and only 30mn by train from
> Copenhagen capital of Danmark. We, of course, welcome people from other places
> too.
>
> We are already working on securing one or two speakers that will enlighten us.
>
> I would like the git community to help us with:
>
> - has a git workshop already been organized?
> is there material that we could get?
> any conference organization existing (something like YAPC)?
>
> - what's the interrest? I'm sure I can get 30 ppl to join but if there is
> interrest we can organize something bigger.
>
I'll be there if I can.
> - Can you be :
> - a speaker
> - a sponsor
>
I've been speaking enough on oss conferences this year and feel I don't
have time to spend on making slides and preparing for another conference,
but I'd love to attend and can almost certainly help out on the workshop
if needed.
> - If you come, what would you like to learn, discuss?
>
I'm primarily interested in finding developers that want to integrate git
with other applications, such as IDE's. I need to know what they would
need from a git library so I can properly prioritize the different todos
for libgit2.
--
Andreas Ericsson andreas.ericsson@op5.se
OP5 AB www.op5.se
Tel: +46 8-230225 Fax: +46 8-230231
^ permalink raw reply
* Re: Cygwin error?
From: Andreas Ericsson @ 2008-11-20 8:57 UTC (permalink / raw)
To: nadim khemir; +Cc: git
In-Reply-To: <200811191857.30793.nadim@khemir.net>
nadim khemir wrote:
> Hi, Given:
>
> $ git pull
> remote: Counting objects: 46, done.
> ...
> Updating b80286d..a543dae
> error: Untracked working tree file 'xxx.txt' would be overwritten by merge.
>
>
> This is due to a rename of xxx.txt to Xxx.txt. I understand that this is due
> to files being just case preserving on Cycwin/Win32.
>
> The only I found was to remove the xxx.txt localy and do a pull. The
> interresting thing is that Xxx.txt is no present in my file system. I can
> check it out from HEAD though.
>
> What did I missunderstood and do wrong?
>
You ran into a corner-case. Git expects the "Xxx.txt" and "xxx.txt" to be
different. Cross-OS projects should never, ever rename files so that they
end up with case ambiguity. Since they did, the only thing you can really
do is this:
git fetch
rm xxx.txt
git reset --hard origin/master; # or whatever branch you're interested in
I'm afraid you'll have problems with this until all the branches you're
interested in have this change.
--
Andreas Ericsson andreas.ericsson@op5.se
OP5 AB www.op5.se
Tel: +46 8-230225 Fax: +46 8-230231
^ permalink raw reply
* [TopGit PATCH] Use the topological order when exporting explicitly listed branches.
From: martin f. krafft @ 2008-11-20 9:38 UTC (permalink / raw)
To: git, pasky; +Cc: Niko Tyni, martin f. krafft
From: Niko Tyni <ntyni@debian.org>
When exporting explicitly listed branches (tg export -b), the branch
dependencies were not taken into account.
Signed-off-by: martin f. krafft <madduck@debian.org>
Tested-by: martin f. krafft <madduck@debian.org>
---
Arguably, lines 178:189 need to be refactored due to the code duplication, but
the patch does what it should for now.
tg-export.sh | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/tg-export.sh b/tg-export.sh
index 52af88d..037b991 100644
--- a/tg-export.sh
+++ b/tg-export.sh
@@ -181,9 +181,9 @@ if [ -z "$branches" ]; then
recurse_deps driver "$name"
(_ret=0; _dep="$name"; _name=""; _dep_is_tgish=1; driver)
else
- echo "$branches" | tr ',' '\n' | while read _dep; do
- _dep_is_tgish=1
- $driver
+ echo "$branches" | tr ',' '\n' | while read name; do
+ recurse_deps driver "$name"
+ (_ret=0; _dep="$name"; _name=""; _dep_is_tgish=1; driver)
done
name="$(echo "$branches" | sed 's/.*,//')"
fi
--
1.5.6.5
^ permalink raw reply related
* Re: Recommended steps for a "subsystem maintainer" ?
From: Michael J Gruber @ 2008-11-20 9:58 UTC (permalink / raw)
To: garyyang6; +Cc: git
In-Reply-To: <643392.36561.qm@web37903.mail.mud.yahoo.com>
Gary Yang venit, vidit, dixit 19.11.2008 21:47:
> Hi,
>
> The
> doc,http://www.kernel.org/pub/software/scm/git/docs/gitcore-tutorial.html
> at "Working with Others" recommended steps for a "subsystem
> maintainer". See below. But, I do not understand the step 3. Copy
> over the packed files from "project lead" public repository to your
> public repository. The step 1 used git-clone. That means, I got the
> code including histories as well. Why do I need step 3 to get the
> packed files?
Step 1 sets up your private development repo. Step 3 talks about your
public repo.
It's recommended you get the original packs because differently abled
protocols like http cannot repack on the fly. That is, if people pull
via http from upstream and your public repo they might have to download
two different packs for (almost) the same objects.
> If I really need the packed files, how do I get it? As
> an example, I need to get the packed files for
> http://git.denx.de/?p=u-boot.git;a=summary . How can I get the files
> something like, pack-d5ef1966072c86ef5108ac57525b802581de5d21.idx and
> pack-d5ef1966072c86ef5108ac57525b802581de5d21.pack ? The snapshot
> dose not have the packed files. They are all text files.
Snapshots are about files, i.e. contents. They've got nothing to do with
packs. May I suggest reading of both parts of the git tutotorial, as
well as the user manual, in order to clarify some concepts? This would
be an ideal first step before thinking about becoming a subsystem
maintainer.
You can get the original upstream packs by copying them (if you have
shell access) or simply by cloning via http. Store them in
.git/objects/pack of your public repo before you push anything into it,
and don't run "repack -adf" there (repack is OK).
Michael
^ permalink raw reply
* [PATCH] Updated Swedish translation (514t0f0u).
From: Peter Krefting @ 2008-11-20 10:03 UTC (permalink / raw)
To: Shawn O. Pearce; +Cc: Git Mailing List, Mikael Magnusson
In-Reply-To: <20081116215822.GF2932@spearce.org>
---
po/sv.po | 1143 +++++++++++++++++++++++++++++++++++++++++++++-----------------
1 files changed, 836 insertions(+), 307 deletions(-)
Shawn O. Pearce:
> git-gui 0.12 will be coming soon. Some new strings have entered
> the project, so I'd like to ask everyone to update their .po with
> new translations.
This is an update to the Swedish translation. Hopefully the UTF-8
encoding survives the e-mail transport.
Mikael, feel like proof-reading?
diff --git a/po/sv.po b/po/sv.po
index 0196ba8..8a8d180 100644
--- a/po/sv.po
+++ b/po/sv.po
@@ -1,48 +1,48 @@
# Swedish translation of git-gui.
-# Copyright (C) 2007 Shawn Pearce, et al.
+# Copyright (C) 2007-2008 Shawn Pearce, et al.
# This file is distributed under the same license as the git-gui package.
#
-# Peter Karlsson <peter@softwolves.pp.se>, 2007-2008.
+# Peter Krefting <peter@softwolves.pp.se>, 2007-2008.
# Mikael Magnusson <mikachu@gmail.com>, 2008.
msgid ""
msgstr ""
"Project-Id-Version: sv\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2008-08-03 01:34+0200\n"
-"PO-Revision-Date: 2008-08-03 01:45+0200\n"
-"Last-Translator: Mikael Magnusson <mikachu@gmail.com>\n"
+"POT-Creation-Date: 2008-11-16 13:56-0800\n"
+"PO-Revision-Date: 2008-11-20 10:59+0100\n"
+"Last-Translator: Peter Krefting <peter@softwolves.pp.se>\n"
"Language-Team: Swedish <tp-sv@listor.tp-sv.se>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#: git-gui.sh:41 git-gui.sh:688 git-gui.sh:702 git-gui.sh:715 git-gui.sh:798
-#: git-gui.sh:817
+#: git-gui.sh:41 git-gui.sh:737 git-gui.sh:751 git-gui.sh:764 git-gui.sh:847
+#: git-gui.sh:866
msgid "git-gui: fatal error"
msgstr "git-gui: ödesdigert fel"
-#: git-gui.sh:644
+#: git-gui.sh:689
#, tcl-format
msgid "Invalid font specified in %s:"
msgstr "Ogiltigt teckensnitt angivet i %s:"
-#: git-gui.sh:674
+#: git-gui.sh:723
msgid "Main Font"
msgstr "Huvudteckensnitt"
-#: git-gui.sh:675
+#: git-gui.sh:724
msgid "Diff/Console Font"
msgstr "Diff/konsolteckensnitt"
-#: git-gui.sh:689
+#: git-gui.sh:738
msgid "Cannot find git in PATH."
msgstr "Hittar inte git i PATH."
-#: git-gui.sh:716
+#: git-gui.sh:765
msgid "Cannot parse Git version string:"
msgstr "Kan inte tolka versionssträng från Git:"
-#: git-gui.sh:734
+#: git-gui.sh:783
#, tcl-format
msgid ""
"Git version cannot be determined.\n"
@@ -61,380 +61,445 @@ msgstr ""
"\n"
"Anta att \"%s\" är version 1.5.0?\n"
-#: git-gui.sh:972
+#: git-gui.sh:1062
msgid "Git directory not found:"
msgstr "Git-katalogen hittades inte:"
-#: git-gui.sh:979
+#: git-gui.sh:1069
msgid "Cannot move to top of working directory:"
msgstr "Kan inte gå till början på arbetskatalogen:"
-#: git-gui.sh:986
+#: git-gui.sh:1076
msgid "Cannot use funny .git directory:"
msgstr "Kan inte använda underlig .git-katalog:"
-#: git-gui.sh:991
+#: git-gui.sh:1081
msgid "No working directory"
msgstr "Ingen arbetskatalog"
-#: git-gui.sh:1138 lib/checkout_op.tcl:305
+#: git-gui.sh:1247 lib/checkout_op.tcl:305
msgid "Refreshing file status..."
msgstr "Uppdaterar filstatus..."
-#: git-gui.sh:1194
+#: git-gui.sh:1303
msgid "Scanning for modified files ..."
msgstr "Söker efter ändrade filer..."
-#: git-gui.sh:1369 lib/browser.tcl:246
+#: git-gui.sh:1367
+msgid "Calling prepare-commit-msg hook..."
+msgstr "Anropar kroken för förberedning av incheckningsmeddelande (prepare-commit-msg)..."
+
+#: git-gui.sh:1384
+msgid "Commit declined by prepare-commit-msg hook."
+msgstr "Incheckningen avvisades av kroken för förberedning av incheckningsmeddelande (prepare-commit-msg)."
+
+#: git-gui.sh:1542 lib/browser.tcl:246
msgid "Ready."
msgstr "Klar."
-#: git-gui.sh:1635
+#: git-gui.sh:1819
msgid "Unmodified"
msgstr "Oförändrade"
-#: git-gui.sh:1637
+#: git-gui.sh:1821
msgid "Modified, not staged"
msgstr "Förändrade, ej köade"
-#: git-gui.sh:1638 git-gui.sh:1643
+#: git-gui.sh:1822 git-gui.sh:1830
msgid "Staged for commit"
msgstr "Köade för incheckning"
-#: git-gui.sh:1639 git-gui.sh:1644
+#: git-gui.sh:1823 git-gui.sh:1831
msgid "Portions staged for commit"
msgstr "Delar köade för incheckning"
-#: git-gui.sh:1640 git-gui.sh:1645
+#: git-gui.sh:1824 git-gui.sh:1832
msgid "Staged for commit, missing"
msgstr "Köade för incheckning, saknade"
-#: git-gui.sh:1642
+#: git-gui.sh:1826
+msgid "File type changed, not staged"
+msgstr "Filtyp ändrad, ej köade"
+
+#: git-gui.sh:1827
+msgid "File type changed, staged"
+msgstr "Filtyp ändrad, köade"
+
+#: git-gui.sh:1829
msgid "Untracked, not staged"
msgstr "Ej spårade, ej köade"
-#: git-gui.sh:1647
+#: git-gui.sh:1834
msgid "Missing"
msgstr "Saknade"
-#: git-gui.sh:1648
+#: git-gui.sh:1835
msgid "Staged for removal"
msgstr "Köade för borttagning"
-#: git-gui.sh:1649
+#: git-gui.sh:1836
msgid "Staged for removal, still present"
msgstr "Köade för borttagning, fortfarande närvarande"
-#: git-gui.sh:1651 git-gui.sh:1652 git-gui.sh:1653 git-gui.sh:1654
+#: git-gui.sh:1838 git-gui.sh:1839 git-gui.sh:1840 git-gui.sh:1841
+#: git-gui.sh:1842 git-gui.sh:1843
msgid "Requires merge resolution"
msgstr "Kräver konflikthantering efter sammanslagning"
-#: git-gui.sh:1689
+#: git-gui.sh:1878
msgid "Starting gitk... please wait..."
msgstr "Startar gitk... vänta..."
-#: git-gui.sh:1698
+#: git-gui.sh:1887
msgid "Couldn't find gitk in PATH"
msgstr "Hittar inte gitk i PATH."
-#: git-gui.sh:1948 lib/choose_repository.tcl:36
+#: git-gui.sh:2280 lib/choose_repository.tcl:36
msgid "Repository"
msgstr "Arkiv"
-#: git-gui.sh:1949
+#: git-gui.sh:2281
msgid "Edit"
msgstr "Redigera"
-#: git-gui.sh:1951 lib/choose_rev.tcl:561
+#: git-gui.sh:2283 lib/choose_rev.tcl:561
msgid "Branch"
msgstr "Gren"
-#: git-gui.sh:1954 lib/choose_rev.tcl:548
+#: git-gui.sh:2286 lib/choose_rev.tcl:548
msgid "Commit@@noun"
msgstr "Incheckning"
-#: git-gui.sh:1957 lib/merge.tcl:120 lib/merge.tcl:149 lib/merge.tcl:167
+#: git-gui.sh:2289 lib/merge.tcl:121 lib/merge.tcl:150 lib/merge.tcl:168
msgid "Merge"
msgstr "Slå ihop"
-#: git-gui.sh:1958 lib/choose_rev.tcl:557
+#: git-gui.sh:2290 lib/choose_rev.tcl:557
msgid "Remote"
msgstr "Fjärr"
-#: git-gui.sh:1967
+#: git-gui.sh:2293
+msgid "Tools"
+msgstr "Verktyg"
+
+#: git-gui.sh:2302
+msgid "Explore Working Copy"
+msgstr "Utforska arbetskopia"
+
+#: git-gui.sh:2307
msgid "Browse Current Branch's Files"
msgstr "Bläddra i grenens filer"
-#: git-gui.sh:1971
+#: git-gui.sh:2311
msgid "Browse Branch Files..."
msgstr "Bläddra filer på gren..."
-#: git-gui.sh:1976
+#: git-gui.sh:2316
msgid "Visualize Current Branch's History"
msgstr "Visualisera grenens historik"
-#: git-gui.sh:1980
+#: git-gui.sh:2320
msgid "Visualize All Branch History"
msgstr "Visualisera alla grenars historik"
-#: git-gui.sh:1987
+#: git-gui.sh:2327
#, tcl-format
msgid "Browse %s's Files"
msgstr "Bläddra i filer för %s"
-#: git-gui.sh:1989
+#: git-gui.sh:2329
#, tcl-format
msgid "Visualize %s's History"
msgstr "Visualisera historik för %s"
-#: git-gui.sh:1994 lib/database.tcl:27 lib/database.tcl:67
+#: git-gui.sh:2334 lib/database.tcl:27 lib/database.tcl:67
msgid "Database Statistics"
msgstr "Databasstatistik"
-#: git-gui.sh:1997 lib/database.tcl:34
+#: git-gui.sh:2337 lib/database.tcl:34
msgid "Compress Database"
msgstr "Komprimera databas"
-#: git-gui.sh:2000
+#: git-gui.sh:2340
msgid "Verify Database"
msgstr "Verifiera databas"
-#: git-gui.sh:2007 git-gui.sh:2011 git-gui.sh:2015 lib/shortcut.tcl:7
+#: git-gui.sh:2347 git-gui.sh:2351 git-gui.sh:2355 lib/shortcut.tcl:7
#: lib/shortcut.tcl:39 lib/shortcut.tcl:71
msgid "Create Desktop Icon"
msgstr "Skapa skrivbordsikon"
-#: git-gui.sh:2023 lib/choose_repository.tcl:177 lib/choose_repository.tcl:185
+#: git-gui.sh:2363 lib/choose_repository.tcl:183 lib/choose_repository.tcl:191
msgid "Quit"
msgstr "Avsluta"
-#: git-gui.sh:2031
+#: git-gui.sh:2371
msgid "Undo"
msgstr "Ã…ngra"
-#: git-gui.sh:2034
+#: git-gui.sh:2374
msgid "Redo"
msgstr "Gör om"
-#: git-gui.sh:2038 git-gui.sh:2545
+#: git-gui.sh:2378 git-gui.sh:2923
msgid "Cut"
msgstr "Klipp ut"
-#: git-gui.sh:2041 git-gui.sh:2548 git-gui.sh:2622 git-gui.sh:2715
+#: git-gui.sh:2381 git-gui.sh:2926 git-gui.sh:3000 git-gui.sh:3082
#: lib/console.tcl:69
msgid "Copy"
msgstr "Kopiera"
-#: git-gui.sh:2044 git-gui.sh:2551
+#: git-gui.sh:2384 git-gui.sh:2929
msgid "Paste"
msgstr "Klistra in"
-#: git-gui.sh:2047 git-gui.sh:2554 lib/branch_delete.tcl:26
+#: git-gui.sh:2387 git-gui.sh:2932 lib/branch_delete.tcl:26
#: lib/remote_branch_delete.tcl:38
msgid "Delete"
msgstr "Ta bort"
-#: git-gui.sh:2051 git-gui.sh:2558 git-gui.sh:2719 lib/console.tcl:71
+#: git-gui.sh:2391 git-gui.sh:2936 git-gui.sh:3086 lib/console.tcl:71
msgid "Select All"
msgstr "Markera alla"
-#: git-gui.sh:2060
+#: git-gui.sh:2400
msgid "Create..."
msgstr "Skapa..."
-#: git-gui.sh:2066
+#: git-gui.sh:2406
msgid "Checkout..."
msgstr "Checka ut..."
-#: git-gui.sh:2072
+#: git-gui.sh:2412
msgid "Rename..."
msgstr "Byt namn..."
-#: git-gui.sh:2077 git-gui.sh:2187
+#: git-gui.sh:2417
msgid "Delete..."
msgstr "Ta bort..."
-#: git-gui.sh:2082
+#: git-gui.sh:2422
msgid "Reset..."
msgstr "Återställ..."
-#: git-gui.sh:2094 git-gui.sh:2491
+#: git-gui.sh:2432
+msgid "Done"
+msgstr "Färdig"
+
+#: git-gui.sh:2434
+msgid "Commit@@verb"
+msgstr "Checka in"
+
+#: git-gui.sh:2443 git-gui.sh:2864
msgid "New Commit"
msgstr "Ny incheckning"
-#: git-gui.sh:2102 git-gui.sh:2498
+#: git-gui.sh:2451 git-gui.sh:2871
msgid "Amend Last Commit"
msgstr "Lägg till föregående incheckning"
-#: git-gui.sh:2111 git-gui.sh:2458 lib/remote_branch_delete.tcl:99
+#: git-gui.sh:2461 git-gui.sh:2825 lib/remote_branch_delete.tcl:99
msgid "Rescan"
msgstr "Sök på nytt"
-#: git-gui.sh:2117
+#: git-gui.sh:2467
msgid "Stage To Commit"
msgstr "Köa för incheckning"
-#: git-gui.sh:2123
+#: git-gui.sh:2473
msgid "Stage Changed Files To Commit"
msgstr "Köa ändrade filer för incheckning"
-#: git-gui.sh:2129
+#: git-gui.sh:2479
msgid "Unstage From Commit"
msgstr "Ta bort från incheckningskö"
-#: git-gui.sh:2134 lib/index.tcl:395
+#: git-gui.sh:2484 lib/index.tcl:410
msgid "Revert Changes"
msgstr "Återställ ändringar"
-#: git-gui.sh:2141 git-gui.sh:2702
+#: git-gui.sh:2491 git-gui.sh:3069
msgid "Show Less Context"
msgstr "Visa mindre sammanhang"
-#: git-gui.sh:2145 git-gui.sh:2706
+#: git-gui.sh:2495 git-gui.sh:3073
msgid "Show More Context"
msgstr "Visa mer sammanhang"
-#: git-gui.sh:2151 git-gui.sh:2470 git-gui.sh:2569
+#: git-gui.sh:2502 git-gui.sh:2838 git-gui.sh:2947
msgid "Sign Off"
msgstr "Skriv under"
-#: git-gui.sh:2155 git-gui.sh:2474
-msgid "Commit@@verb"
-msgstr "Checka in"
-
-#: git-gui.sh:2166
+#: git-gui.sh:2518
msgid "Local Merge..."
msgstr "Lokal sammanslagning..."
-#: git-gui.sh:2171
+#: git-gui.sh:2523
msgid "Abort Merge..."
msgstr "Avbryt sammanslagning..."
-#: git-gui.sh:2183
+#: git-gui.sh:2535 git-gui.sh:2575
+msgid "Add..."
+msgstr "Lägg till..."
+
+#: git-gui.sh:2539
msgid "Push..."
msgstr "Sänd..."
-#: git-gui.sh:2197 git-gui.sh:2219 lib/about.tcl:14
-#: lib/choose_repository.tcl:44 lib/choose_repository.tcl:50
+#: git-gui.sh:2543
+msgid "Delete Branch..."
+msgstr "Ta bort gren..."
+
+#: git-gui.sh:2553 git-gui.sh:2589 lib/about.tcl:14
+#: lib/choose_repository.tcl:44 lib/choose_repository.tcl:53
#, tcl-format
msgid "About %s"
msgstr "Om %s"
-#: git-gui.sh:2201
+#: git-gui.sh:2557
msgid "Preferences..."
msgstr "Inställningar..."
-#: git-gui.sh:2209 git-gui.sh:2740
+#: git-gui.sh:2565 git-gui.sh:3115
msgid "Options..."
msgstr "Alternativ..."
-#: git-gui.sh:2215 lib/choose_repository.tcl:47
+#: git-gui.sh:2576
+msgid "Remove..."
+msgstr "Ta bort..."
+
+#: git-gui.sh:2585 lib/choose_repository.tcl:50
msgid "Help"
msgstr "Hjälp"
-#: git-gui.sh:2256
+#: git-gui.sh:2611
msgid "Online Documentation"
msgstr "Webbdokumentation"
-#: git-gui.sh:2340
+#: git-gui.sh:2614 lib/choose_repository.tcl:47 lib/choose_repository.tcl:56
+msgid "Show SSH Key"
+msgstr "Visa SSH-nyckel"
+
+#: git-gui.sh:2707
#, tcl-format
msgid "fatal: cannot stat path %s: No such file or directory"
msgstr ""
"ödesdigert: kunde inte ta status på sökvägen %s: Fil eller katalog saknas"
-#: git-gui.sh:2373
+#: git-gui.sh:2740
msgid "Current Branch:"
msgstr "Aktuell gren:"
-#: git-gui.sh:2394
+#: git-gui.sh:2761
msgid "Staged Changes (Will Commit)"
msgstr "Köade ändringar (kommer att checkas in)"
-#: git-gui.sh:2414
+#: git-gui.sh:2781
msgid "Unstaged Changes"
msgstr "Oköade ändringar"
-#: git-gui.sh:2464
+#: git-gui.sh:2831
msgid "Stage Changed"
msgstr "Köa ändrade"
-#: git-gui.sh:2480 lib/transport.tcl:93 lib/transport.tcl:182
+#: git-gui.sh:2850 lib/transport.tcl:93 lib/transport.tcl:182
msgid "Push"
msgstr "Sänd"
-#: git-gui.sh:2510
+#: git-gui.sh:2885
msgid "Initial Commit Message:"
msgstr "Inledande incheckningsmeddelande:"
-#: git-gui.sh:2511
+#: git-gui.sh:2886
msgid "Amended Commit Message:"
msgstr "Utökat incheckningsmeddelande:"
-#: git-gui.sh:2512
+#: git-gui.sh:2887
msgid "Amended Initial Commit Message:"
msgstr "Utökat inledande incheckningsmeddelande:"
-#: git-gui.sh:2513
+#: git-gui.sh:2888
msgid "Amended Merge Commit Message:"
msgstr "Utökat incheckningsmeddelande för sammanslagning:"
-#: git-gui.sh:2514
+#: git-gui.sh:2889
msgid "Merge Commit Message:"
msgstr "Incheckningsmeddelande för sammanslagning:"
-#: git-gui.sh:2515
+#: git-gui.sh:2890
msgid "Commit Message:"
msgstr "Incheckningsmeddelande:"
-#: git-gui.sh:2561 git-gui.sh:2723 lib/console.tcl:73
+#: git-gui.sh:2939 git-gui.sh:3090 lib/console.tcl:73
msgid "Copy All"
msgstr "Kopiera alla"
-#: git-gui.sh:2585 lib/blame.tcl:100
+#: git-gui.sh:2963 lib/blame.tcl:104
msgid "File:"
msgstr "Fil:"
-#: git-gui.sh:2691
-msgid "Apply/Reverse Hunk"
-msgstr "Använd/återställ del"
-
-#: git-gui.sh:2696
-msgid "Apply/Reverse Line"
-msgstr "Använd/återställ rad"
-
-#: git-gui.sh:2711
+#: git-gui.sh:3078
msgid "Refresh"
msgstr "Uppdatera"
-#: git-gui.sh:2732
+#: git-gui.sh:3099
msgid "Decrease Font Size"
msgstr "Minska teckensnittsstorlek"
-#: git-gui.sh:2736
+#: git-gui.sh:3103
msgid "Increase Font Size"
msgstr "Öka teckensnittsstorlek"
-#: git-gui.sh:2747
+#: git-gui.sh:3111 lib/blame.tcl:281
+msgid "Encoding"
+msgstr "Teckenkodning"
+
+#: git-gui.sh:3122
+msgid "Apply/Reverse Hunk"
+msgstr "Använd/återställ del"
+
+#: git-gui.sh:3127
+msgid "Apply/Reverse Line"
+msgstr "Använd/återställ rad"
+
+#: git-gui.sh:3137
+msgid "Run Merge Tool"
+msgstr "Starta verktyg för sammanslagning"
+
+#: git-gui.sh:3142
+msgid "Use Remote Version"
+msgstr "Använd fjärrversionen"
+
+#: git-gui.sh:3146
+msgid "Use Local Version"
+msgstr "Använd lokala versionen"
+
+#: git-gui.sh:3150
+msgid "Revert To Base"
+msgstr "Återställ till basversionen"
+
+#: git-gui.sh:3169
msgid "Unstage Hunk From Commit"
msgstr "Ta bort del ur incheckningskö"
-#: git-gui.sh:2748
+#: git-gui.sh:3170
msgid "Unstage Line From Commit"
msgstr "Ta bort rad ur incheckningskö"
-#: git-gui.sh:2750
+#: git-gui.sh:3172
msgid "Stage Hunk For Commit"
msgstr "Ställ del i incheckningskö"
-#: git-gui.sh:2751
+#: git-gui.sh:3173
msgid "Stage Line For Commit"
msgstr "Ställ rad i incheckningskö"
-#: git-gui.sh:2771
+#: git-gui.sh:3196
msgid "Initializing..."
msgstr "Initierar..."
-#: git-gui.sh:2876
+#: git-gui.sh:3301
#, tcl-format
msgid ""
"Possible environment issues exist.\n"
@@ -451,7 +516,7 @@ msgstr ""
"av %s:\n"
"\n"
-#: git-gui.sh:2906
+#: git-gui.sh:3331
msgid ""
"\n"
"This is due to a known issue with the\n"
@@ -461,7 +526,7 @@ msgstr ""
"Detta beror på ett känt problem med\n"
"Tcl-binären som följer med Cygwin."
-#: git-gui.sh:2911
+#: git-gui.sh:3336
#, tcl-format
msgid ""
"\n"
@@ -482,80 +547,108 @@ msgstr ""
msgid "git-gui - a graphical user interface for Git."
msgstr "git-gui - ett grafiskt användargränssnitt för Git."
-#: lib/blame.tcl:70
+#: lib/blame.tcl:72
msgid "File Viewer"
msgstr "Filvisare"
-#: lib/blame.tcl:74
+#: lib/blame.tcl:78
msgid "Commit:"
msgstr "Incheckning:"
-#: lib/blame.tcl:257
+#: lib/blame.tcl:271
msgid "Copy Commit"
msgstr "Kopiera incheckning"
-#: lib/blame.tcl:260
+#: lib/blame.tcl:275
+msgid "Find Text..."
+msgstr "Sök text..."
+
+#: lib/blame.tcl:284
msgid "Do Full Copy Detection"
msgstr "Gör full kopieringsigenkänning"
-#: lib/blame.tcl:388
+#: lib/blame.tcl:288
+msgid "Show History Context"
+msgstr "Visa historiksammanhang"
+
+#: lib/blame.tcl:291
+msgid "Blame Parent Commit"
+msgstr "Klandra föräldraincheckning"
+
+#: lib/blame.tcl:450
#, tcl-format
msgid "Reading %s..."
msgstr "Läser %s..."
-#: lib/blame.tcl:492
+#: lib/blame.tcl:557
msgid "Loading copy/move tracking annotations..."
msgstr "Läser annoteringar för kopiering/flyttning..."
-#: lib/blame.tcl:512
+#: lib/blame.tcl:577
msgid "lines annotated"
msgstr "rader annoterade"
-#: lib/blame.tcl:704
+#: lib/blame.tcl:769
msgid "Loading original location annotations..."
msgstr "Läser in annotering av originalplacering..."
-#: lib/blame.tcl:707
+#: lib/blame.tcl:772
msgid "Annotation complete."
msgstr "Annotering fullbordad."
-#: lib/blame.tcl:737
+#: lib/blame.tcl:802
msgid "Busy"
msgstr "Upptagen"
-#: lib/blame.tcl:738
+#: lib/blame.tcl:803
msgid "Annotation process is already running."
msgstr "Annoteringsprocess körs redan."
-#: lib/blame.tcl:777
+#: lib/blame.tcl:842
msgid "Running thorough copy detection..."
msgstr "Kör grundlig kopieringsigenkänning..."
-#: lib/blame.tcl:827
+#: lib/blame.tcl:910
msgid "Loading annotation..."
msgstr "Läser in annotering..."
-#: lib/blame.tcl:883
+#: lib/blame.tcl:964
msgid "Author:"
msgstr "Författare:"
-#: lib/blame.tcl:887
+#: lib/blame.tcl:968
msgid "Committer:"
msgstr "Incheckare:"
-#: lib/blame.tcl:892
+#: lib/blame.tcl:973
msgid "Original File:"
msgstr "Ursprunglig fil:"
-#: lib/blame.tcl:1006
+#: lib/blame.tcl:1021
+msgid "Cannot find HEAD commit:"
+msgstr "Hittar inte incheckning för HEAD:"
+
+#: lib/blame.tcl:1076
+msgid "Cannot find parent commit:"
+msgstr "Hittar inte föräldraincheckning:"
+
+#: lib/blame.tcl:1091
+msgid "Unable to display parent"
+msgstr "Kan inte visa förälder"
+
+#: lib/blame.tcl:1092 lib/diff.tcl:297
+msgid "Error loading diff:"
+msgstr "Fel vid inläsning av differens:"
+
+#: lib/blame.tcl:1232
msgid "Originally By:"
msgstr "Ursprungligen av:"
-#: lib/blame.tcl:1012
+#: lib/blame.tcl:1238
msgid "In File:"
msgstr "I filen:"
-#: lib/blame.tcl:1017
+#: lib/blame.tcl:1243
msgid "Copied Or Moved Here By:"
msgstr "Kopierad eller flyttad hit av:"
@@ -569,16 +662,18 @@ msgstr "Checka ut"
#: lib/branch_checkout.tcl:27 lib/branch_create.tcl:35
#: lib/branch_delete.tcl:32 lib/branch_rename.tcl:30 lib/browser.tcl:282
-#: lib/checkout_op.tcl:544 lib/choose_font.tcl:43 lib/merge.tcl:171
-#: lib/option.tcl:103 lib/remote_branch_delete.tcl:42 lib/transport.tcl:97
+#: lib/checkout_op.tcl:544 lib/choose_font.tcl:43 lib/merge.tcl:172
+#: lib/option.tcl:125 lib/remote_add.tcl:32 lib/remote_branch_delete.tcl:42
+#: lib/tools_dlg.tcl:40 lib/tools_dlg.tcl:204 lib/tools_dlg.tcl:352
+#: lib/transport.tcl:97
msgid "Cancel"
msgstr "Avbryt"
-#: lib/branch_checkout.tcl:32 lib/browser.tcl:287
+#: lib/branch_checkout.tcl:32 lib/browser.tcl:287 lib/tools_dlg.tcl:328
msgid "Revision"
msgstr "Revision"
-#: lib/branch_checkout.tcl:36 lib/branch_create.tcl:69 lib/option.tcl:244
+#: lib/branch_checkout.tcl:36 lib/branch_create.tcl:69 lib/option.tcl:280
msgid "Options"
msgstr "Alternativ"
@@ -598,7 +693,7 @@ msgstr "Skapa gren"
msgid "Create New Branch"
msgstr "Skapa ny gren"
-#: lib/branch_create.tcl:31 lib/choose_repository.tcl:371
+#: lib/branch_create.tcl:31 lib/choose_repository.tcl:377
msgid "Create"
msgstr "Skapa"
@@ -606,7 +701,7 @@ msgstr "Skapa"
msgid "Branch Name"
msgstr "Namn på gren"
-#: lib/branch_create.tcl:43
+#: lib/branch_create.tcl:43 lib/remote_add.tcl:39 lib/tools_dlg.tcl:50
msgid "Name:"
msgstr "Namn:"
@@ -751,9 +846,9 @@ msgstr "[Upp till förälder]"
msgid "Browse Branch Files"
msgstr "Bläddra filer på grenen"
-#: lib/browser.tcl:278 lib/choose_repository.tcl:387
-#: lib/choose_repository.tcl:472 lib/choose_repository.tcl:482
-#: lib/choose_repository.tcl:985
+#: lib/browser.tcl:278 lib/choose_repository.tcl:394
+#: lib/choose_repository.tcl:480 lib/choose_repository.tcl:491
+#: lib/choose_repository.tcl:995
msgid "Browse"
msgstr "Bläddra"
@@ -768,6 +863,7 @@ msgid "fatal: Cannot resolve %s"
msgstr "ödesdigert: Kunde inte slå upp %s"
#: lib/checkout_op.tcl:145 lib/console.tcl:81 lib/database.tcl:31
+#: lib/sshkey.tcl:53
msgid "Close"
msgstr "Stäng"
@@ -879,7 +975,7 @@ msgstr "Det kanske inte är så enkelt att återskapa förlorade incheckningar."
msgid "Reset '%s'?"
msgstr "Återställa \"%s\"?"
-#: lib/checkout_op.tcl:532 lib/merge.tcl:163
+#: lib/checkout_op.tcl:532 lib/merge.tcl:164 lib/tools_dlg.tcl:343
msgid "Visualize"
msgstr "Visualisera"
@@ -928,221 +1024,225 @@ msgstr ""
msgid "Git Gui"
msgstr "Git Gui"
-#: lib/choose_repository.tcl:81 lib/choose_repository.tcl:376
+#: lib/choose_repository.tcl:87 lib/choose_repository.tcl:382
msgid "Create New Repository"
msgstr "Skapa nytt arkiv"
-#: lib/choose_repository.tcl:87
+#: lib/choose_repository.tcl:93
msgid "New..."
msgstr "Nytt..."
-#: lib/choose_repository.tcl:94 lib/choose_repository.tcl:458
+#: lib/choose_repository.tcl:100 lib/choose_repository.tcl:465
msgid "Clone Existing Repository"
msgstr "Klona befintligt arkiv"
-#: lib/choose_repository.tcl:100
+#: lib/choose_repository.tcl:106
msgid "Clone..."
msgstr "Klona..."
-#: lib/choose_repository.tcl:107 lib/choose_repository.tcl:974
+#: lib/choose_repository.tcl:113 lib/choose_repository.tcl:983
msgid "Open Existing Repository"
msgstr "Öppna befintligt arkiv"
-#: lib/choose_repository.tcl:113
+#: lib/choose_repository.tcl:119
msgid "Open..."
msgstr "Öppna..."
-#: lib/choose_repository.tcl:126
+#: lib/choose_repository.tcl:132
msgid "Recent Repositories"
msgstr "Senaste arkiven"
-#: lib/choose_repository.tcl:132
+#: lib/choose_repository.tcl:138
msgid "Open Recent Repository:"
msgstr "Öppna tidigare arkiv:"
-#: lib/choose_repository.tcl:296 lib/choose_repository.tcl:303
-#: lib/choose_repository.tcl:310
+#: lib/choose_repository.tcl:302 lib/choose_repository.tcl:309
+#: lib/choose_repository.tcl:316
#, tcl-format
msgid "Failed to create repository %s:"
msgstr "Kunde inte skapa arkivet %s:"
-#: lib/choose_repository.tcl:381 lib/choose_repository.tcl:476
+#: lib/choose_repository.tcl:387
msgid "Directory:"
msgstr "Katalog:"
-#: lib/choose_repository.tcl:410 lib/choose_repository.tcl:535
-#: lib/choose_repository.tcl:1007
+#: lib/choose_repository.tcl:417 lib/choose_repository.tcl:544
+#: lib/choose_repository.tcl:1017
msgid "Git Repository"
msgstr "Gitarkiv"
-#: lib/choose_repository.tcl:435
+#: lib/choose_repository.tcl:442
#, tcl-format
msgid "Directory %s already exists."
msgstr "Katalogen %s finns redan."
-#: lib/choose_repository.tcl:439
+#: lib/choose_repository.tcl:446
#, tcl-format
msgid "File %s already exists."
msgstr "Filen %s finns redan."
-#: lib/choose_repository.tcl:453
+#: lib/choose_repository.tcl:460
msgid "Clone"
msgstr "Klona"
-#: lib/choose_repository.tcl:466
-msgid "URL:"
-msgstr "Webbadress:"
+#: lib/choose_repository.tcl:473
+msgid "Source Location:"
+msgstr "Plats för källkod:"
+
+#: lib/choose_repository.tcl:484
+msgid "Target Directory:"
+msgstr "MÃ¥lkatalog:"
-#: lib/choose_repository.tcl:487
+#: lib/choose_repository.tcl:496
msgid "Clone Type:"
msgstr "Typ av klon:"
-#: lib/choose_repository.tcl:493
+#: lib/choose_repository.tcl:502
msgid "Standard (Fast, Semi-Redundant, Hardlinks)"
msgstr "Standard (snabb, semiredundant, hårda länkar)"
-#: lib/choose_repository.tcl:499
+#: lib/choose_repository.tcl:508
msgid "Full Copy (Slower, Redundant Backup)"
msgstr "Full kopia (långsammare, redundant säkerhetskopia)"
-#: lib/choose_repository.tcl:505
+#: lib/choose_repository.tcl:514
msgid "Shared (Fastest, Not Recommended, No Backup)"
msgstr "Delad (snabbast, rekommenderas ej, ingen säkerhetskopia)"
-#: lib/choose_repository.tcl:541 lib/choose_repository.tcl:588
-#: lib/choose_repository.tcl:734 lib/choose_repository.tcl:804
-#: lib/choose_repository.tcl:1013 lib/choose_repository.tcl:1021
+#: lib/choose_repository.tcl:550 lib/choose_repository.tcl:597
+#: lib/choose_repository.tcl:743 lib/choose_repository.tcl:813
+#: lib/choose_repository.tcl:1023 lib/choose_repository.tcl:1031
#, tcl-format
msgid "Not a Git repository: %s"
msgstr "Inte ett Gitarkiv: %s"
-#: lib/choose_repository.tcl:577
+#: lib/choose_repository.tcl:586
msgid "Standard only available for local repository."
msgstr "Standard är endast tillgängligt för lokala arkiv."
-#: lib/choose_repository.tcl:581
+#: lib/choose_repository.tcl:590
msgid "Shared only available for local repository."
msgstr "Delat är endast tillgängligt för lokala arkiv."
-#: lib/choose_repository.tcl:602
+#: lib/choose_repository.tcl:611
#, tcl-format
msgid "Location %s already exists."
msgstr "Platsen %s finns redan."
-#: lib/choose_repository.tcl:613
+#: lib/choose_repository.tcl:622
msgid "Failed to configure origin"
msgstr "Kunde inte konfigurera ursprung"
-#: lib/choose_repository.tcl:625
+#: lib/choose_repository.tcl:634
msgid "Counting objects"
msgstr "Räknar objekt"
-#: lib/choose_repository.tcl:626
+#: lib/choose_repository.tcl:635
msgid "buckets"
msgstr "hinkar"
-#: lib/choose_repository.tcl:650
+#: lib/choose_repository.tcl:659
#, tcl-format
msgid "Unable to copy objects/info/alternates: %s"
msgstr "Kunde inte kopiera objekt/info/alternativ: %s"
-#: lib/choose_repository.tcl:686
+#: lib/choose_repository.tcl:695
#, tcl-format
msgid "Nothing to clone from %s."
msgstr "Ingenting att klona från %s."
-#: lib/choose_repository.tcl:688 lib/choose_repository.tcl:902
-#: lib/choose_repository.tcl:914
+#: lib/choose_repository.tcl:697 lib/choose_repository.tcl:911
+#: lib/choose_repository.tcl:923
msgid "The 'master' branch has not been initialized."
msgstr "Grenen \"master\" har inte initierats."
-#: lib/choose_repository.tcl:701
+#: lib/choose_repository.tcl:710
msgid "Hardlinks are unavailable. Falling back to copying."
msgstr "Hårda länkar är inte tillgängliga. Faller tillbaka på kopiering."
-#: lib/choose_repository.tcl:713
+#: lib/choose_repository.tcl:722
#, tcl-format
msgid "Cloning from %s"
msgstr "Klonar från %s"
-#: lib/choose_repository.tcl:744
+#: lib/choose_repository.tcl:753
msgid "Copying objects"
msgstr "Kopierar objekt"
-#: lib/choose_repository.tcl:745
+#: lib/choose_repository.tcl:754
msgid "KiB"
msgstr "KiB"
-#: lib/choose_repository.tcl:769
+#: lib/choose_repository.tcl:778
#, tcl-format
msgid "Unable to copy object: %s"
msgstr "Kunde inte kopiera objekt: %s"
-#: lib/choose_repository.tcl:779
+#: lib/choose_repository.tcl:788
msgid "Linking objects"
msgstr "Länkar objekt"
-#: lib/choose_repository.tcl:780
+#: lib/choose_repository.tcl:789
msgid "objects"
msgstr "objekt"
-#: lib/choose_repository.tcl:788
+#: lib/choose_repository.tcl:797
#, tcl-format
msgid "Unable to hardlink object: %s"
msgstr "Kunde inte hårdlänka objekt: %s"
-#: lib/choose_repository.tcl:843
+#: lib/choose_repository.tcl:852
msgid "Cannot fetch branches and objects. See console output for details."
msgstr "Kunde inte hämta grenar och objekt. Se konsolutdata för detaljer."
-#: lib/choose_repository.tcl:854
+#: lib/choose_repository.tcl:863
msgid "Cannot fetch tags. See console output for details."
msgstr "Kunde inte hämta taggar. Se konsolutdata för detaljer."
-#: lib/choose_repository.tcl:878
+#: lib/choose_repository.tcl:887
msgid "Cannot determine HEAD. See console output for details."
msgstr "Kunde inte avgöra HEAD. Se konsolutdata för detaljer."
-#: lib/choose_repository.tcl:887
+#: lib/choose_repository.tcl:896
#, tcl-format
msgid "Unable to cleanup %s"
msgstr "Kunde inte städa upp %s"
-#: lib/choose_repository.tcl:893
+#: lib/choose_repository.tcl:902
msgid "Clone failed."
msgstr "Kloning misslyckades."
-#: lib/choose_repository.tcl:900
+#: lib/choose_repository.tcl:909
msgid "No default branch obtained."
msgstr "Hämtade ingen standardgren."
-#: lib/choose_repository.tcl:911
+#: lib/choose_repository.tcl:920
#, tcl-format
msgid "Cannot resolve %s as a commit."
msgstr "Kunde inte slå upp %s till någon incheckning."
-#: lib/choose_repository.tcl:923
+#: lib/choose_repository.tcl:932
msgid "Creating working directory"
msgstr "Skapar arbetskatalog"
-#: lib/choose_repository.tcl:924 lib/index.tcl:65 lib/index.tcl:127
-#: lib/index.tcl:193
+#: lib/choose_repository.tcl:933 lib/index.tcl:65 lib/index.tcl:128
+#: lib/index.tcl:196
msgid "files"
msgstr "filer"
-#: lib/choose_repository.tcl:953
+#: lib/choose_repository.tcl:962
msgid "Initial file checkout failed."
msgstr "Inledande filutcheckning misslyckades."
-#: lib/choose_repository.tcl:969
+#: lib/choose_repository.tcl:978
msgid "Open"
msgstr "Öppna"
-#: lib/choose_repository.tcl:979
+#: lib/choose_repository.tcl:988
msgid "Repository:"
msgstr "Arkiv:"
-#: lib/choose_repository.tcl:1027
+#: lib/choose_repository.tcl:1037
#, tcl-format
msgid "Failed to open repository %s:"
msgstr "Kunde inte öppna arkivet %s:"
@@ -1242,7 +1342,7 @@ msgstr ""
"\n"
"Sökningen kommer att startas automatiskt nu.\n"
-#: lib/commit.tcl:154
+#: lib/commit.tcl:156
#, tcl-format
msgid ""
"Unmerged files cannot be committed.\n"
@@ -1255,7 +1355,7 @@ msgstr ""
"Filen %s har sammanslagningskonflikter. Du måste lösa dem och köa filen "
"innan du checkar in den.\n"
-#: lib/commit.tcl:162
+#: lib/commit.tcl:164
#, tcl-format
msgid ""
"Unknown file state %s detected.\n"
@@ -1266,7 +1366,7 @@ msgstr ""
"\n"
"Filen %s kan inte checkas in av programmet.\n"
-#: lib/commit.tcl:170
+#: lib/commit.tcl:172
msgid ""
"No changes to commit.\n"
"\n"
@@ -1276,7 +1376,7 @@ msgstr ""
"\n"
"Du måste köa åtminstone en fil innan du kan checka in.\n"
-#: lib/commit.tcl:183
+#: lib/commit.tcl:187
msgid ""
"Please supply a commit message.\n"
"\n"
@@ -1294,45 +1394,45 @@ msgstr ""
"- Andra raden: Tom\n"
"- Följande rader: Beskriv varför det här är en bra ändring.\n"
-#: lib/commit.tcl:207
+#: lib/commit.tcl:211
#, tcl-format
msgid "warning: Tcl does not support encoding '%s'."
msgstr "varning: Tcl stöder inte teckenkodningen \"%s\"."
-#: lib/commit.tcl:221
+#: lib/commit.tcl:227
msgid "Calling pre-commit hook..."
-msgstr "Anropar krok före incheckning..."
+msgstr "Anropar kroken före incheckning (pre-commit)..."
-#: lib/commit.tcl:236
+#: lib/commit.tcl:242
msgid "Commit declined by pre-commit hook."
-msgstr "Incheckningen avvisades av krok före incheckning."
+msgstr "Incheckningen avvisades av kroken före incheckning (pre-commit)."
-#: lib/commit.tcl:259
+#: lib/commit.tcl:265
msgid "Calling commit-msg hook..."
-msgstr "Anropar krok för incheckningsmeddelande..."
+msgstr "Anropar kroken för incheckningsmeddelande (commit-msg)..."
-#: lib/commit.tcl:274
+#: lib/commit.tcl:280
msgid "Commit declined by commit-msg hook."
-msgstr "Incheckning avvisad av krok för incheckningsmeddelande."
+msgstr "Incheckning avvisad av kroken för incheckningsmeddelande (commit-msg)."
-#: lib/commit.tcl:287
+#: lib/commit.tcl:293
msgid "Committing changes..."
msgstr "Checkar in ändringar..."
-#: lib/commit.tcl:303
+#: lib/commit.tcl:309
msgid "write-tree failed:"
msgstr "write-tree misslyckades:"
-#: lib/commit.tcl:304 lib/commit.tcl:348 lib/commit.tcl:368
+#: lib/commit.tcl:310 lib/commit.tcl:354 lib/commit.tcl:374
msgid "Commit failed."
msgstr "Incheckningen misslyckades."
-#: lib/commit.tcl:321
+#: lib/commit.tcl:327
#, tcl-format
msgid "Commit %s appears to be corrupt"
msgstr "Incheckningen %s verkar vara trasig"
-#: lib/commit.tcl:326
+#: lib/commit.tcl:332
msgid ""
"No changes to commit.\n"
"\n"
@@ -1346,19 +1446,19 @@ msgstr ""
"\n"
"En sökning kommer att startas automatiskt nu.\n"
-#: lib/commit.tcl:333
+#: lib/commit.tcl:339
msgid "No changes to commit."
msgstr "Inga ändringar att checka in."
-#: lib/commit.tcl:347
+#: lib/commit.tcl:353
msgid "commit-tree failed:"
msgstr "commit-tree misslyckades:"
-#: lib/commit.tcl:367
+#: lib/commit.tcl:373
msgid "update-ref failed:"
msgstr "update-ref misslyckades:"
-#: lib/commit.tcl:454
+#: lib/commit.tcl:461
#, tcl-format
msgid "Created commit %s: %s"
msgstr "Skapade incheckningen %s: %s"
@@ -1433,7 +1533,7 @@ msgstr ""
msgid "Invalid date from Git: %s"
msgstr "Ogiltigt datum från Git: %s"
-#: lib/diff.tcl:44
+#: lib/diff.tcl:59
#, tcl-format
msgid ""
"No differences detected.\n"
@@ -1456,48 +1556,98 @@ msgstr ""
"En sökning kommer automatiskt att startas för att hitta andra filer som kan "
"vara i samma tillstånd."
-#: lib/diff.tcl:83
+#: lib/diff.tcl:99
#, tcl-format
msgid "Loading diff of %s..."
msgstr "Läser differens för %s..."
-#: lib/diff.tcl:116 lib/diff.tcl:190
+#: lib/diff.tcl:120
+msgid ""
+"LOCAL: deleted\n"
+"REMOTE:\n"
+msgstr "LOKAL: borttagen\n"
+"FJÄRR:\n"
+
+#: lib/diff.tcl:125
+msgid ""
+"REMOTE: deleted\n"
+"LOCAL:\n"
+msgstr "FJÄRR: borttagen\n"
+"LOKAL:\n"
+
+#: lib/diff.tcl:132
+msgid "LOCAL:\n"
+msgstr "LOKAL:\n"
+
+#: lib/diff.tcl:135
+msgid "REMOTE:\n"
+msgstr "FJÄRR:\n"
+
+#: lib/diff.tcl:197 lib/diff.tcl:296
#, tcl-format
msgid "Unable to display %s"
msgstr "Kan inte visa %s"
-#: lib/diff.tcl:117
+#: lib/diff.tcl:198
msgid "Error loading file:"
msgstr "Fel vid läsning av fil:"
-#: lib/diff.tcl:124
+#: lib/diff.tcl:205
msgid "Git Repository (subproject)"
msgstr "Gitarkiv (underprojekt)"
-#: lib/diff.tcl:136
+#: lib/diff.tcl:217
msgid "* Binary file (not showing content)."
msgstr "* Binärfil (visar inte innehållet)."
-#: lib/diff.tcl:191
-msgid "Error loading diff:"
-msgstr "Fel vid inläsning av differens:"
+#: lib/diff.tcl:222
+#, tcl-format
+msgid ""
+"* Untracked file is %d bytes.\n"
+"* Showing only first %d bytes.\n"
+msgstr "* Den ospårad filen är %d byte.\n"
+"* Visar endast inledande %d byte.\n"
-#: lib/diff.tcl:313
+#: lib/diff.tcl:228
+#, tcl-format
+msgid ""
+"\n"
+"* Untracked file clipped here by %s.\n"
+"* To see the entire file, use an external editor.\n"
+msgstr ""
+"\n"
+"* Den ospårade filen klipptes här av %s.\n"
+"* För att se hela filen, använd ett externt redigeringsprogram.\n"
+
+#: lib/diff.tcl:436
msgid "Failed to unstage selected hunk."
msgstr "Kunde inte ta bort den valda delen från kön."
-#: lib/diff.tcl:320
+#: lib/diff.tcl:443
msgid "Failed to stage selected hunk."
msgstr "Kunde inte lägga till den valda delen till kön."
-#: lib/diff.tcl:386
+#: lib/diff.tcl:509
msgid "Failed to unstage selected line."
msgstr "Kunde inte ta bort den valda raden från kön."
-#: lib/diff.tcl:394
+#: lib/diff.tcl:517
msgid "Failed to stage selected line."
msgstr "Kunde inte lägga till den valda raden till kön."
+#: lib/encoding.tcl:443
+msgid "Default"
+msgstr "Standard"
+
+#: lib/encoding.tcl:448
+#, tcl-format
+msgid "System (%s)"
+msgstr "Systemets (%s)"
+
+#: lib/encoding.tcl:459 lib/encoding.tcl:465
+msgid "Other"
+msgstr "Annan"
+
#: lib/error.tcl:20 lib/error.tcl:114
msgid "error"
msgstr "fel"
@@ -1534,39 +1684,48 @@ msgstr "Forstätt"
msgid "Unlock Index"
msgstr "LÃ¥s upp index"
-#: lib/index.tcl:282
+#: lib/index.tcl:287
#, tcl-format
msgid "Unstaging %s from commit"
msgstr "Tar bort %s för incheckningskön"
-#: lib/index.tcl:313
+#: lib/index.tcl:326
msgid "Ready to commit."
msgstr "Redo att checka in."
-#: lib/index.tcl:326
+#: lib/index.tcl:339
#, tcl-format
msgid "Adding %s"
msgstr "Lägger till %s"
-#: lib/index.tcl:381
+#: lib/index.tcl:396
#, tcl-format
msgid "Revert changes in file %s?"
msgstr "Återställ ändringarna i filen %s?"
-#: lib/index.tcl:383
+#: lib/index.tcl:398
#, tcl-format
msgid "Revert changes in these %i files?"
msgstr "Återställ ändringarna i dessa %i filer?"
-#: lib/index.tcl:391
+#: lib/index.tcl:406
msgid "Any unstaged changes will be permanently lost by the revert."
msgstr ""
"Alla oköade ändringar kommer permanent gå förlorade vid återställningen."
-#: lib/index.tcl:394
+#: lib/index.tcl:409
msgid "Do Nothing"
msgstr "Gör ingenting"
+#: lib/index.tcl:427
+msgid "Reverting selected files"
+msgstr "Återställer valda filer"
+
+#: lib/index.tcl:431
+#, tcl-format
+msgid "Reverting %s"
+msgstr "Återställer %s"
+
#: lib/merge.tcl:13
msgid ""
"Cannot merge while amending.\n"
@@ -1594,7 +1753,7 @@ msgstr ""
"\n"
"Sökningen kommer att startas automatiskt nu.\n"
-#: lib/merge.tcl:44
+#: lib/merge.tcl:45
#, tcl-format
msgid ""
"You are in the middle of a conflicted merge.\n"
@@ -1611,7 +1770,7 @@ msgstr ""
"Du måste lösa dem, köa filen och checka in för att fullborda den aktuella "
"sammanslagningen. När du gjort det kan du påbörja en ny sammanslagning.\n"
-#: lib/merge.tcl:54
+#: lib/merge.tcl:55
#, tcl-format
msgid ""
"You are in the middle of a change.\n"
@@ -1629,34 +1788,34 @@ msgstr ""
"sammanslagning. Om du gör det blir det enklare att avbryta en misslyckad "
"sammanslagning, om det skulle vara nödvändigt.\n"
-#: lib/merge.tcl:106
+#: lib/merge.tcl:107
#, tcl-format
msgid "%s of %s"
msgstr "%s av %s"
-#: lib/merge.tcl:119
+#: lib/merge.tcl:120
#, tcl-format
msgid "Merging %s and %s..."
msgstr "Slår ihop %s och %s..."
-#: lib/merge.tcl:130
+#: lib/merge.tcl:131
msgid "Merge completed successfully."
msgstr "Sammanslagningen avslutades framgångsrikt."
-#: lib/merge.tcl:132
+#: lib/merge.tcl:133
msgid "Merge failed. Conflict resolution is required."
msgstr "Sammanslagningen misslyckades. Du måste lösa konflikterna."
-#: lib/merge.tcl:157
+#: lib/merge.tcl:158
#, tcl-format
msgid "Merge Into %s"
msgstr "Slå ihop i %s"
-#: lib/merge.tcl:176
+#: lib/merge.tcl:177
msgid "Revision To Merge"
msgstr "Revisioner att slå ihop"
-#: lib/merge.tcl:211
+#: lib/merge.tcl:212
msgid ""
"Cannot abort while amending.\n"
"\n"
@@ -1666,7 +1825,7 @@ msgstr ""
"\n"
"Du måste göra dig färdig med att utöka incheckningen.\n"
-#: lib/merge.tcl:221
+#: lib/merge.tcl:222
msgid ""
"Abort merge?\n"
"\n"
@@ -1681,7 +1840,7 @@ msgstr ""
"\n"
"GÃ¥ vidare med att avbryta den aktuella sammanslagningen?"
-#: lib/merge.tcl:227
+#: lib/merge.tcl:228
msgid ""
"Reset changes?\n"
"\n"
@@ -1696,118 +1855,320 @@ msgstr ""
"\n"
"Gå vidare med att återställa de aktuella ändringarna?"
-#: lib/merge.tcl:238
+#: lib/merge.tcl:239
msgid "Aborting"
msgstr "Avbryter"
-#: lib/merge.tcl:238
+#: lib/merge.tcl:239
msgid "files reset"
msgstr "filer återställda"
-#: lib/merge.tcl:266
+#: lib/merge.tcl:267
msgid "Abort failed."
msgstr "Misslyckades avbryta."
-#: lib/merge.tcl:268
+#: lib/merge.tcl:269
msgid "Abort completed. Ready."
msgstr "Avbrytning fullbordad. Redo."
-#: lib/option.tcl:95
+#: lib/mergetool.tcl:8
+msgid "Force resolution to the base version?"
+msgstr "Tvinga lösning att använda basversionen?"
+
+#: lib/mergetool.tcl:9
+msgid "Force resolution to this branch?"
+msgstr "Tvinga lösning att använda den aktuella grenen?"
+
+#: lib/mergetool.tcl:10
+msgid "Force resolution to the other branch?"
+msgstr "Tvinga lösning att använda den andra grenen?"
+
+#: lib/mergetool.tcl:14
+#, tcl-format
+msgid ""
+"Note that the diff shows only conflicting changes.\n"
+"\n"
+"%s will be overwritten.\n"
+"\n"
+"This operation can be undone only by restarting the merge."
+msgstr ""
+"Observera att diffen endast visar de ändringar som står i konflikt.\n"
+"\n"
+"%s kommer att skrivas över.\n"
+"\n"
+"Du måste starta om sammanslagningen för att göra den här operationen ogjord."
+
+#: lib/mergetool.tcl:45
+#, tcl-format
+msgid "File %s seems to have unresolved conflicts, still stage?"
+msgstr "Filen %s verkar innehålla olösta konflikter, vill du ändå köa?"
+
+#: lib/mergetool.tcl:60
+#, tcl-format
+msgid "Adding resolution for %s"
+msgstr "Lägger till lösning för %s"
+
+#: lib/mergetool.tcl:141
+msgid "Cannot resolve deletion or link conflicts using a tool"
+msgstr "Kan inte lösa borttagnings- eller länkkonflikter med ett verktyg"
+
+#: lib/mergetool.tcl:146
+msgid "Conflict file does not exist"
+msgstr "Konfliktfil existerar inte"
+
+#: lib/mergetool.tcl:264
+#, tcl-format
+msgid "Not a GUI merge tool: '%s'"
+msgstr "Inte ett grafiskt verktyg för sammanslagning: %s"
+
+#: lib/mergetool.tcl:268
+#, tcl-format
+msgid "Unsupported merge tool '%s'"
+msgstr "Verktyget \"%s\" för sammanslagning stöds inte"
+
+#: lib/mergetool.tcl:303
+msgid "Merge tool is already running, terminate it?"
+msgstr "Verktyget för sammanslagning körs redan, vill du avsluta det?"
+
+#: lib/mergetool.tcl:323
+#, tcl-format
+msgid ""
+"Error retrieving versions:\n"
+"%s"
+msgstr "Fel vid hämtning av versioner:\n"
+"%s"
+
+#: lib/mergetool.tcl:343
+#, tcl-format
+msgid ""
+"Could not start the merge tool:\n"
+"\n"
+"%s"
+msgstr "Kunde inte starta verktyg för sammanslagning:\n"
+"\n"
+"%s"
+
+#: lib/mergetool.tcl:347
+msgid "Running merge tool..."
+msgstr "Kör verktyg för sammanslagning..."
+
+#: lib/mergetool.tcl:375 lib/mergetool.tcl:383
+msgid "Merge tool failed."
+msgstr "Verktyget för sammanslagning misslyckades."
+
+#: lib/option.tcl:11
+#, tcl-format
+msgid "Invalid global encoding '%s'"
+msgstr "Den globala teckenkodningen \"%s\" är ogiltig"
+
+#: lib/option.tcl:19
+#, tcl-format
+msgid "Invalid repo encoding '%s'"
+msgstr "Arkivets teckenkodning \"%s\" är ogiltig"
+
+#: lib/option.tcl:117
msgid "Restore Defaults"
msgstr "Återställ standardvärden"
-#: lib/option.tcl:99
+#: lib/option.tcl:121
msgid "Save"
msgstr "Spara"
-#: lib/option.tcl:109
+#: lib/option.tcl:131
#, tcl-format
msgid "%s Repository"
msgstr "Arkivet %s"
-#: lib/option.tcl:110
+#: lib/option.tcl:132
msgid "Global (All Repositories)"
msgstr "Globalt (alla arkiv)"
-#: lib/option.tcl:116
+#: lib/option.tcl:138
msgid "User Name"
msgstr "Användarnamn"
-#: lib/option.tcl:117
+#: lib/option.tcl:139
msgid "Email Address"
msgstr "E-postadress"
-#: lib/option.tcl:119
+#: lib/option.tcl:141
msgid "Summarize Merge Commits"
msgstr "Summera sammanslagningsincheckningar"
-#: lib/option.tcl:120
+#: lib/option.tcl:142
msgid "Merge Verbosity"
msgstr "Pratsamhet för sammanslagningar"
-#: lib/option.tcl:121
+#: lib/option.tcl:143
msgid "Show Diffstat After Merge"
msgstr "Visa diffstatistik efter sammanslagning"
-#: lib/option.tcl:123
+#: lib/option.tcl:144
+msgid "Use Merge Tool"
+msgstr "Använd verktyg för sammanslagning"
+
+#: lib/option.tcl:146
msgid "Trust File Modification Timestamps"
msgstr "Lita på filändringstidsstämplar"
-#: lib/option.tcl:124
+#: lib/option.tcl:147
msgid "Prune Tracking Branches During Fetch"
msgstr "Städa spårade grenar vid hämtning"
-#: lib/option.tcl:125
+#: lib/option.tcl:148
msgid "Match Tracking Branches"
msgstr "Matcha spårade grenar"
-#: lib/option.tcl:126
+#: lib/option.tcl:149
msgid "Blame Copy Only On Changed Files"
msgstr "Klandra kopiering bara i ändrade filer"
-#: lib/option.tcl:127
+#: lib/option.tcl:150
msgid "Minimum Letters To Blame Copy On"
msgstr "Minsta antal tecken att klandra kopiering för"
-#: lib/option.tcl:128
+#: lib/option.tcl:151
+msgid "Blame History Context Radius (days)"
+msgstr "Historikkontextradie för klandring (dagar)"
+
+#: lib/option.tcl:152
msgid "Number of Diff Context Lines"
msgstr "Antal rader sammanhang i differenser"
-#: lib/option.tcl:129
+#: lib/option.tcl:153
msgid "Commit Message Text Width"
msgstr "Textbredd för incheckningsmeddelande"
-#: lib/option.tcl:130
+#: lib/option.tcl:154
msgid "New Branch Name Template"
msgstr "Mall för namn på nya grenar"
-#: lib/option.tcl:194
+#: lib/option.tcl:155
+msgid "Default File Contents Encoding"
+msgstr "Standardteckenkodning för filinnehåll"
+
+#: lib/option.tcl:203
+msgid "Change"
+msgstr "Ändra"
+
+#: lib/option.tcl:230
msgid "Spelling Dictionary:"
msgstr "Stavningsordlista:"
-#: lib/option.tcl:218
+#: lib/option.tcl:254
msgid "Change Font"
msgstr "Byt teckensnitt"
-#: lib/option.tcl:222
+#: lib/option.tcl:258
#, tcl-format
msgid "Choose %s"
msgstr "Välj %s"
-#: lib/option.tcl:228
+#: lib/option.tcl:264
msgid "pt."
msgstr "p."
-#: lib/option.tcl:242
+#: lib/option.tcl:278
msgid "Preferences"
msgstr "Inställningar"
-#: lib/option.tcl:277
+#: lib/option.tcl:314
msgid "Failed to completely save options:"
msgstr "Misslyckades med att helt spara alternativ:"
+#: lib/remote.tcl:163
+msgid "Remove Remote"
+msgstr "Ta bort fjärr"
+
+#: lib/remote.tcl:168
+msgid "Prune from"
+msgstr "Ta bort från"
+
+#: lib/remote.tcl:173
+msgid "Fetch from"
+msgstr "Hämta från"
+
+#: lib/remote.tcl:215
+msgid "Push to"
+msgstr "Sänd till"
+
+#: lib/remote_add.tcl:19
+msgid "Add Remote"
+msgstr "Lägg till fjärr"
+
+#: lib/remote_add.tcl:24
+msgid "Add New Remote"
+msgstr "Lägg till ny fjärr"
+
+#: lib/remote_add.tcl:28 lib/tools_dlg.tcl:36
+msgid "Add"
+msgstr "Lägg till"
+
+#: lib/remote_add.tcl:37
+msgid "Remote Details"
+msgstr "Detaljer för fjärr"
+
+#: lib/remote_add.tcl:50
+msgid "Location:"
+msgstr "Plats:"
+
+#: lib/remote_add.tcl:62
+msgid "Further Action"
+msgstr "Ytterligare åtgärd"
+
+#: lib/remote_add.tcl:65
+msgid "Fetch Immediately"
+msgstr "Hämta omedelbart"
+
+#: lib/remote_add.tcl:71
+msgid "Initialize Remote Repository and Push"
+msgstr "Initiera fjärrarkiv och sänd till"
+
+#: lib/remote_add.tcl:77
+msgid "Do Nothing Else Now"
+msgstr "Gör ingent mer nu"
+
+#: lib/remote_add.tcl:101
+msgid "Please supply a remote name."
+msgstr "Ange ett namn för fjärren."
+
+#: lib/remote_add.tcl:114
+#, tcl-format
+msgid "'%s' is not an acceptable remote name."
+msgstr "\"%s\" kan inte användas som namn på fjärren."
+
+#: lib/remote_add.tcl:125
+#, tcl-format
+msgid "Failed to add remote '%s' of location '%s'."
+msgstr "Kunde inte lägga till fjärren \"%s\" på platsen \"%s\"."
+
+#: lib/remote_add.tcl:133 lib/transport.tcl:6
+#, tcl-format
+msgid "fetch %s"
+msgstr "hämta %s"
+
+#: lib/remote_add.tcl:134
+#, tcl-format
+msgid "Fetching the %s"
+msgstr "Hämtar %s"
+
+#: lib/remote_add.tcl:157
+#, tcl-format
+msgid "Do not know how to initialize repository at location '%s'."
+msgstr "Vet inte hur arkivet på platsen \"%s\" skall initieras."
+
+#: lib/remote_add.tcl:163 lib/transport.tcl:25 lib/transport.tcl:71
+#, tcl-format
+msgid "push %s"
+msgstr "sänd %s"
+
+#: lib/remote_add.tcl:164
+#, tcl-format
+msgid "Setting up the %s (at %s)"
+msgstr "Konfigurerar %s (på %s)"
+
#: lib/remote_branch_delete.tcl:29 lib/remote_branch_delete.tcl:34
-msgid "Delete Remote Branch"
+msgid "Delete Branch Remotely"
msgstr "Ta bort fjärrgren"
#: lib/remote_branch_delete.tcl:47
@@ -1819,8 +2180,8 @@ msgid "Remote:"
msgstr "Fjärr:"
#: lib/remote_branch_delete.tcl:66 lib/transport.tcl:138
-msgid "Arbitrary URL:"
-msgstr "Godtycklig webbadress:"
+msgid "Arbitrary Location:"
+msgstr "Godtycklig plats:"
#: lib/remote_branch_delete.tcl:84
msgid "Branches"
@@ -1890,17 +2251,21 @@ msgstr "Inget arkiv markerat."
msgid "Scanning %s..."
msgstr "Söker %s..."
-#: lib/remote.tcl:165
-msgid "Prune from"
-msgstr "Ta bort från"
+#: lib/search.tcl:21
+msgid "Find:"
+msgstr "Sök:"
-#: lib/remote.tcl:170
-msgid "Fetch from"
-msgstr "Hämta från"
+#: lib/search.tcl:23
+msgid "Next"
+msgstr "Nästa"
-#: lib/remote.tcl:213
-msgid "Push to"
-msgstr "Sänd till"
+#: lib/search.tcl:24
+msgid "Prev"
+msgstr "Föreg"
+
+#: lib/search.tcl:25
+msgid "Case-Sensitive"
+msgstr "Skilj på VERSALER/gemener"
#: lib/shortcut.tcl:20 lib/shortcut.tcl:61
msgid "Cannot write shortcut:"
@@ -1939,23 +2304,186 @@ msgstr "Stavningskontrollprogrammet känns inte igen"
msgid "No Suggestions"
msgstr "Inga förslag"
-#: lib/spellcheck.tcl:387
+#: lib/spellcheck.tcl:388
msgid "Unexpected EOF from spell checker"
msgstr "Oväntat filslut från stavningskontroll"
-#: lib/spellcheck.tcl:391
+#: lib/spellcheck.tcl:392
msgid "Spell Checker Failed"
msgstr "Stavningskontroll misslyckades"
+#: lib/sshkey.tcl:31
+msgid "No keys found."
+msgstr "Inga nycklar hittades."
+
+#: lib/sshkey.tcl:34
+#, tcl-format
+msgid "Found a public key in: %s"
+msgstr "Hittade öppen nyckel i: %s"
+
+#: lib/sshkey.tcl:40
+msgid "Generate Key"
+msgstr "Skapa nyckel"
+
+#: lib/sshkey.tcl:56
+msgid "Copy To Clipboard"
+msgstr "Kopiera till Urklipp"
+
+#: lib/sshkey.tcl:70
+msgid "Your OpenSSH Public Key"
+msgstr "Din öppna OpenSSH-nyckel"
+
+#: lib/sshkey.tcl:78
+msgid "Generating..."
+msgstr "Skapar..."
+
+#: lib/sshkey.tcl:84
+#, tcl-format
+msgid ""
+"Could not start ssh-keygen:\n"
+"\n"
+"%s"
+msgstr "Kunde inte starta ssh-keygen:\n"
+"\n"
+"%s"
+
+#: lib/sshkey.tcl:111
+msgid "Generation failed."
+msgstr "Misslyckades med att skapa."
+
+#: lib/sshkey.tcl:118
+msgid "Generation succeded, but no keys found."
+msgstr "Lyckades skapa nyckeln, men hittar inte någon nyckel."
+
+#: lib/sshkey.tcl:121
+#, tcl-format
+msgid "Your key is in: %s"
+msgstr "Din nyckel finns i: %s"
+
#: lib/status_bar.tcl:83
#, tcl-format
msgid "%s ... %*i of %*i %s (%3i%%)"
msgstr "%s... %*i av %*i %s (%3i%%)"
-#: lib/transport.tcl:6
+#: lib/tools.tcl:75
#, tcl-format
-msgid "fetch %s"
-msgstr "hämta %s"
+msgid "Running %s requires a selected file."
+msgstr "För att starta %s måste du välja en fil."
+
+#: lib/tools.tcl:90
+#, tcl-format
+msgid "Are you sure you want to run %s?"
+msgstr "Är du säker på att du vill starta %s?"
+
+#: lib/tools.tcl:110
+#, tcl-format
+msgid "Tool: %s"
+msgstr "Verktyg: %s"
+
+#: lib/tools.tcl:111
+#, tcl-format
+msgid "Running: %s"
+msgstr "Kör: %s"
+
+#: lib/tools.tcl:149
+#, tcl-format
+msgid "Tool completed succesfully: %s"
+msgstr "Verktyget avslutades framgångsrikt."
+
+#: lib/tools.tcl:151
+#, tcl-format
+msgid "Tool failed: %s"
+msgstr "Verktyget misslyckades: %s"
+
+#: lib/tools_dlg.tcl:22
+msgid "Add Tool"
+msgstr "Lägg till verktyg"
+
+#: lib/tools_dlg.tcl:28
+msgid "Add New Tool Command"
+msgstr "Lägg till nytt verktygskommando"
+
+#: lib/tools_dlg.tcl:33
+msgid "Add globally"
+msgstr "Lägg till globalt"
+
+#: lib/tools_dlg.tcl:45
+msgid "Tool Details"
+msgstr "Detaljer för verktyg"
+
+#: lib/tools_dlg.tcl:48
+msgid "Use '/' separators to create a submenu tree:"
+msgstr "Använd \"/\"-avdelare för att skapa ett undermenyträd:"
+
+#: lib/tools_dlg.tcl:61
+msgid "Command:"
+msgstr "Kommando:"
+
+#: lib/tools_dlg.tcl:74
+msgid "Show a dialog before running"
+msgstr "Visa dialog innan programmet startas"
+
+#: lib/tools_dlg.tcl:80
+msgid "Ask the user to select a revision (sets $REVISION)"
+msgstr "Be användaren välja en version (sätter $REVISION)"
+
+#: lib/tools_dlg.tcl:85
+msgid "Ask the user for additional arguments (sets $ARGS)"
+msgstr "Be användaren om ytterligare parametrar (sätter $ARGS)"
+
+#: lib/tools_dlg.tcl:92
+msgid "Don't show the command output window"
+msgstr "Visa inte kommandots utdatafönster"
+
+#: lib/tools_dlg.tcl:97
+msgid "Run only if a diff is selected ($FILENAME not empty)"
+msgstr "Kör endast om en diff har markerats ($FILENAME är inte tomt)"
+
+#: lib/tools_dlg.tcl:121
+msgid "Please supply a name for the tool."
+msgstr "Ange ett namn för verktyget."
+
+#: lib/tools_dlg.tcl:129
+#, tcl-format
+msgid "Tool '%s' already exists."
+msgstr "Verktyget \"%s\" finns redan."
+
+#: lib/tools_dlg.tcl:151
+#, tcl-format
+msgid ""
+"Could not add tool:\n"
+"%s"
+msgstr "Kunde inte lägga till verktyget:\n"
+"%s"
+
+#: lib/tools_dlg.tcl:190
+msgid "Remove Tool"
+msgstr "Ta bort verktyg"
+
+#: lib/tools_dlg.tcl:196
+msgid "Remove Tool Commands"
+msgstr "Ta bort verktygskommandon"
+
+#: lib/tools_dlg.tcl:200
+msgid "Remove"
+msgstr "Ta bort"
+
+#: lib/tools_dlg.tcl:236
+msgid "(Blue denotes repository-local tools)"
+msgstr "(Blått anger verktyg lokala för arkivet)"
+
+#: lib/tools_dlg.tcl:297
+#, tcl-format
+msgid "Run Command: %s"
+msgstr "Kör kommandot: %s"
+
+#: lib/tools_dlg.tcl:311
+msgid "Arguments"
+msgstr "Argument"
+
+#: lib/tools_dlg.tcl:348
+msgid "OK"
+msgstr "OK"
#: lib/transport.tcl:7
#, tcl-format
@@ -1972,11 +2500,6 @@ msgstr "fjärrborttagning %s"
msgid "Pruning tracking branches deleted from %s"
msgstr "Tar bort spårande grenar som tagits bort från %s"
-#: lib/transport.tcl:25 lib/transport.tcl:71
-#, tcl-format
-msgid "push %s"
-msgstr "sänd %s"
-
#: lib/transport.tcl:26
#, tcl-format
msgid "Pushing changes to %s"
@@ -1989,7 +2512,7 @@ msgstr "Sänder %s %s till %s"
#: lib/transport.tcl:89
msgid "Push Branches"
-msgstr "Sänder grenar"
+msgstr "Sänd grenar"
#: lib/transport.tcl:103
msgid "Source Branches"
@@ -2015,6 +2538,12 @@ msgstr "Använd tunt paket (för långsamma nätverksanslutningar)"
msgid "Include tags"
msgstr "Ta med taggar"
+#~ msgid "URL:"
+#~ msgstr "Webbadress:"
+
+#~ msgid "Delete Remote Branch"
+#~ msgstr "Ta bort fjärrgren"
+
#~ msgid ""
#~ "Unable to start gitk:\n"
#~ "\n"
--
1.5.6.5
^ permalink raw reply related
* Re: [TopGit PATCH] Use the topological order when exporting explicitly listed branches.
From: Petr Baudis @ 2008-11-20 10:20 UTC (permalink / raw)
To: martin f. krafft; +Cc: git, Niko Tyni
In-Reply-To: <1227173902-21180-1-git-send-email-madduck@debian.org>
On Thu, Nov 20, 2008 at 10:38:22AM +0100, martin f. krafft wrote:
> From: Niko Tyni <ntyni@debian.org>
>
> When exporting explicitly listed branches (tg export -b), the branch
> dependencies were not taken into account.
>
> Signed-off-by: martin f. krafft <madduck@debian.org>
> Tested-by: martin f. krafft <madduck@debian.org>
> ---
> Arguably, lines 178:189 need to be refactored due to the code duplication, but
> the patch does what it should for now.
The point of -b is to export only the specified branches, assuming you
already exported the dependencies before. If you just want to export a
branch with all its dependencies, why not just switch to it and call
plain tg export?
--
Petr "Pasky" Baudis
People who take cold baths never have rheumatism, but they have
cold baths.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox