* [PATCH 1/3] revision: move -L setup before output_format-to-diff derivation
2026-04-28 4:05 [PATCH 0/3] line-log: integrate -L with the standard log output pipeline Michael Montalbo via GitGitGadget
@ 2026-04-28 4:05 ` Michael Montalbo via GitGitGadget
2026-04-28 4:05 ` [PATCH 2/3] line-log: integrate -L output with the standard log-tree pipeline Michael Montalbo via GitGitGadget
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Michael Montalbo via GitGitGadget @ 2026-04-28 4:05 UTC (permalink / raw)
To: git; +Cc: Michael Montalbo, Michael Montalbo
From: Michael Montalbo <mmontalbo@gmail.com>
The line_level_traverse block sets a default DIFF_FORMAT_PATCH when
no output format has been explicitly requested. This default must
be visible to the "Did the user ask for any diff output?" check
that derives revs->diff from revs->diffopt.output_format.
Currently the -L block runs after that derivation, so revs->diff
stays 0 when no explicit format is given. This does not matter yet
because log_tree_commit() short-circuits into line_log_print()
before consulting revs->diff, but the next commit will route -L
through the normal log_tree_diff() path, which checks revs->diff.
Move the block above the derivation so the default DIFF_FORMAT_PATCH
is in place when revs->diff is computed. No behavior change on its
own.
Signed-off-by: Michael Montalbo <mmontalbo@gmail.com>
---
revision.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/revision.c b/revision.c
index 599b3a66c3..4a8e24bc38 100644
--- a/revision.c
+++ b/revision.c
@@ -3112,6 +3112,14 @@ int setup_revisions(int argc, const char **argv, struct rev_info *revs, struct s
object_context_release(&oc);
}
+ if (revs->line_level_traverse) {
+ if (want_ancestry(revs))
+ revs->limited = 1;
+ revs->topo_order = 1;
+ if (!revs->diffopt.output_format)
+ revs->diffopt.output_format = DIFF_FORMAT_PATCH;
+ }
+
/* Did the user ask for any diff output? Run the diff! */
if (revs->diffopt.output_format & ~DIFF_FORMAT_NO_OUTPUT)
revs->diff = 1;
@@ -3125,14 +3133,6 @@ int setup_revisions(int argc, const char **argv, struct rev_info *revs, struct s
if (revs->diffopt.objfind)
revs->simplify_history = 0;
- if (revs->line_level_traverse) {
- if (want_ancestry(revs))
- revs->limited = 1;
- revs->topo_order = 1;
- if (!revs->diffopt.output_format)
- revs->diffopt.output_format = DIFF_FORMAT_PATCH;
- }
-
if (revs->topo_order && !generation_numbers_enabled(the_repository))
revs->limited = 1;
--
gitgitgadget
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 2/3] line-log: integrate -L output with the standard log-tree pipeline
2026-04-28 4:05 [PATCH 0/3] line-log: integrate -L with the standard log output pipeline Michael Montalbo via GitGitGadget
2026-04-28 4:05 ` [PATCH 1/3] revision: move -L setup before output_format-to-diff derivation Michael Montalbo via GitGitGadget
@ 2026-04-28 4:05 ` Michael Montalbo via GitGitGadget
2026-04-28 4:05 ` [PATCH 3/3] line-log: allow non-patch diff formats with -L Michael Montalbo via GitGitGadget
2026-05-12 4:01 ` [PATCH 0/3] line-log: integrate -L with the standard log output pipeline Junio C Hamano
3 siblings, 0 replies; 5+ messages in thread
From: Michael Montalbo via GitGitGadget @ 2026-04-28 4:05 UTC (permalink / raw)
To: git; +Cc: Michael Montalbo, Michael Montalbo
From: Michael Montalbo <mmontalbo@gmail.com>
`git log -L` has bypassed log_tree_diff() and log_tree_diff_flush()
since the feature was introduced, short-circuiting from
log_tree_commit() directly into line_log_print(). This skips the
no_free save/restore (noted in a NEEDSWORK comment added by
f8781bfda3), the always_show_header fallback, show_diff_of_diff(),
and diff_free() cleanup.
Restructure so that -L flows through log_tree_diff() ->
log_tree_diff_flush(), the same path used by the normal
single-parent and merge diff codepaths:
- Rename line_log_print() to line_log_queue_pairs() and strip it
down to just queuing pre-computed filepairs. The show_log(),
separator, diffcore_std(), and diff_flush() calls are removed
since log_tree_diff_flush() handles all of those.
- In log_tree_diff(), call line_log_queue_pairs() then
log_tree_diff_flush(), mirroring the diff_tree_oid() + flush
pattern used by the single-parent and merge codepaths.
- Remove the early return in log_tree_commit() that bypassed
no_free save/restore, always_show_header, and diff_free().
Because show_log() is now deferred until after diffcore_std() inside
log_tree_diff_flush(), pickaxe (-S, -G, --find-object) and
--diff-filter now properly suppress commits when all pairs are
filtered out.
The blank-line separator between commit header and diff changes
slightly: the old code printed one unconditionally, while
log_tree_diff_flush() only emits one for verbose headers. This
matches the rest of log output.
Also reject --full-diff, which is meaningless with -L: the filepairs
are pre-computed during the history walk and scoped to tracked paths,
so there is no tree diff to widen.
Update tests accordingly.
Signed-off-by: Michael Montalbo <mmontalbo@gmail.com>
---
line-log.c | 30 ++++-------
line-log.h | 2 +-
log-tree.c | 9 ++--
revision.c | 2 +
t/t4211-line-log.sh | 52 ++++++++++++++-----
t/t4211/sha1/expect.parallel-change-f-to-main | 1 -
.../sha256/expect.parallel-change-f-to-main | 1 -
7 files changed, 56 insertions(+), 41 deletions(-)
diff --git a/line-log.c b/line-log.c
index 858a899cd2..7ee55b05cc 100644
--- a/line-log.c
+++ b/line-log.c
@@ -13,7 +13,6 @@
#include "revision.h"
#include "xdiff-interface.h"
#include "strbuf.h"
-#include "log-tree.h"
#include "line-log.h"
#include "setup.h"
#include "strvec.h"
@@ -1004,29 +1003,18 @@ static int process_all_files(struct line_log_data **range_out,
return changed;
}
-int line_log_print(struct rev_info *rev, struct commit *commit)
+void line_log_queue_pairs(struct rev_info *rev, struct commit *commit)
{
- show_log(rev);
- if (!(rev->diffopt.output_format & DIFF_FORMAT_NO_OUTPUT)) {
- struct line_log_data *range = lookup_line_range(rev, commit);
- struct line_log_data *r;
- const char *prefix = diff_line_prefix(&rev->diffopt);
-
- fprintf(rev->diffopt.file, "%s\n", prefix);
-
- for (r = range; r; r = r->next) {
- if (r->pair) {
- struct diff_filepair *p =
- diff_filepair_dup(r->pair);
- p->line_ranges = &r->ranges;
- diff_q(&diff_queued_diff, p);
- }
- }
+ struct line_log_data *range = lookup_line_range(rev, commit);
+ struct line_log_data *r;
- diffcore_std(&rev->diffopt);
- diff_flush(&rev->diffopt);
+ for (r = range; r; r = r->next) {
+ if (r->pair) {
+ struct diff_filepair *p = diff_filepair_dup(r->pair);
+ p->line_ranges = &r->ranges;
+ diff_q(&diff_queued_diff, p);
+ }
}
- return 1;
}
static int bloom_filter_check(struct rev_info *rev,
diff --git a/line-log.h b/line-log.h
index 04a6ea64d3..99e1755ce3 100644
--- a/line-log.h
+++ b/line-log.h
@@ -46,7 +46,7 @@ int line_log_filter(struct rev_info *rev);
int line_log_process_ranges_arbitrary_commit(struct rev_info *rev,
struct commit *commit);
-int line_log_print(struct rev_info *rev, struct commit *commit);
+void line_log_queue_pairs(struct rev_info *rev, struct commit *commit);
void line_log_free(struct rev_info *rev);
diff --git a/log-tree.c b/log-tree.c
index 7e048701d0..1ead481891 100644
--- a/log-tree.c
+++ b/log-tree.c
@@ -1105,6 +1105,11 @@ static int log_tree_diff(struct rev_info *opt, struct commit *commit, struct log
if (!all_need_diff && !opt->merges_need_diff)
return 0;
+ if (opt->line_level_traverse) {
+ line_log_queue_pairs(opt, commit);
+ return log_tree_diff_flush(opt);
+ }
+
parse_commit_or_die(commit);
oid = get_commit_tree_oid(commit);
@@ -1179,10 +1184,6 @@ int log_tree_commit(struct rev_info *opt, struct commit *commit)
opt->loginfo = &log;
opt->diffopt.no_free = 1;
- /* NEEDSWORK: no restoring of no_free? Why? */
- if (opt->line_level_traverse)
- return line_log_print(opt, commit);
-
if (opt->track_linear && !opt->linear && !opt->reverse_output_stage)
fprintf(opt->diffopt.file, "\n%s\n", opt->break_bar);
shown = log_tree_diff(opt, commit, &log);
diff --git a/revision.c b/revision.c
index 4a8e24bc38..a1c795de96 100644
--- a/revision.c
+++ b/revision.c
@@ -3181,6 +3181,8 @@ int setup_revisions(int argc, const char **argv, struct rev_info *revs, struct s
if (revs->line_level_traverse &&
(revs->diffopt.output_format & ~(DIFF_FORMAT_PATCH | DIFF_FORMAT_NO_OUTPUT)))
die(_("-L does not yet support diff formats besides -p and -s"));
+ if (revs->line_level_traverse && revs->full_diff)
+ die(_("-L is not compatible with --full-diff"));
if (revs->expand_tabs_in_log < 0)
revs->expand_tabs_in_log = revs->expand_tabs_in_log_default;
diff --git a/t/t4211-line-log.sh b/t/t4211-line-log.sh
index aaf197d2ed..1d566ea9bd 100755
--- a/t/t4211-line-log.sh
+++ b/t/t4211-line-log.sh
@@ -368,7 +368,6 @@ test_expect_success '-L diff output includes index and new file mode' '
test_expect_success '-L with --word-diff' '
cat >expect <<-\EOF &&
-
diff --git a/file.c b/file.c
--- a/file.c
+++ b/file.c
@@ -377,7 +376,6 @@ test_expect_success '-L with --word-diff' '
{
return [-F2;-]{+F2 + 2;+}
}
-
diff --git a/file.c b/file.c
new file mode 100644
--- /dev/null
@@ -433,7 +431,6 @@ test_expect_success 'show line-log with graph' '
null_blob=$(test_oid zero | cut -c1-7) &&
qz_to_tab_space >expect <<-EOF &&
* $head_oid Modify func2() in file.c
- |Z
| diff --git a/file.c b/file.c
| index $head_blob_old..$head_blob_new 100644
| --- a/file.c
@@ -445,7 +442,6 @@ test_expect_success 'show line-log with graph' '
| + return F2 + 2;
| }
* $root_oid Add func1() and func2() in file.c
- ZZ
diff --git a/file.c b/file.c
new file mode 100644
index $null_blob..$root_blob
@@ -494,23 +490,17 @@ test_expect_success '-L --find-object does not crash with merge and rename' '
--find-object=$(git rev-parse HEAD:file) >actual
'
-# Commit-level filtering with pickaxe does not yet work for -L.
-# show_log() prints the commit header before diffcore_std() runs
-# pickaxe, so commits cannot be suppressed even when no diff pairs
-# survive filtering. Fixing this would require deferring show_log()
-# until after diffcore_std(), which is a larger restructuring of the
-# log-tree output pipeline.
-test_expect_failure '-L -G should filter commits by pattern' '
+test_expect_success '-L -G should filter commits by pattern' '
git log --format="%s" --no-patch -L 1,1:file -G "nomatch" >actual &&
test_must_be_empty actual
'
-test_expect_failure '-L -S should filter commits by pattern' '
+test_expect_success '-L -S should filter commits by pattern' '
git log --format="%s" --no-patch -L 1,1:file -S "nomatch" >actual &&
test_must_be_empty actual
'
-test_expect_failure '-L --find-object should filter commits by object' '
+test_expect_success '-L --find-object should filter commits by object' '
git log --format="%s" --no-patch -L 1,1:file \
--find-object=$ZERO_OID >actual &&
test_must_be_empty actual
@@ -711,4 +701,40 @@ test_expect_success '-L with -G filters to diff-text matches' '
grep "F2 + 2" actual
'
+test_expect_success '-L with --diff-filter=M excludes root commit' '
+ git checkout parent-oids &&
+ git log -L:func2:file.c --diff-filter=M --format=%s --no-patch >actual &&
+ # Root commit is an Add (A), not a Modify (M), so it should
+ # be excluded; only the modification commit remains.
+ echo "Modify func2() in file.c" >expect &&
+ test_cmp expect actual
+'
+
+test_expect_success '-L with --diff-filter=A shows only root commit' '
+ git checkout parent-oids &&
+ git log -L:func2:file.c --diff-filter=A --format=%s --no-patch >actual &&
+ echo "Add func1() and func2() in file.c" >expect &&
+ test_cmp expect actual
+'
+
+test_expect_success '-L with -S suppresses non-matching commits' '
+ git checkout parent-oids &&
+ git log -L:func2:file.c -S "F2 + 2" --format=%s --no-patch >actual &&
+ # Only the commit that changes the count of "F2 + 2" should appear.
+ echo "Modify func2() in file.c" >expect &&
+ test_cmp expect actual
+'
+
+test_expect_success '--full-diff is not supported with -L' '
+ test_must_fail git log -L1,24:b.c --full-diff 2>err &&
+ test_grep "not compatible with --full-diff" err
+'
+
+test_expect_success '-L --oneline has no extra blank line before diff' '
+ git checkout parent-oids &&
+ git log --oneline -L:func2:file.c -1 >actual &&
+ # Oneline header on line 1, diff starts immediately on line 2
+ sed -n 2p actual | grep "^diff --git"
+'
+
test_done
diff --git a/t/t4211/sha1/expect.parallel-change-f-to-main b/t/t4211/sha1/expect.parallel-change-f-to-main
index 65a8cc673a..6d7a201036 100644
--- a/t/t4211/sha1/expect.parallel-change-f-to-main
+++ b/t/t4211/sha1/expect.parallel-change-f-to-main
@@ -5,7 +5,6 @@ Date: Fri Apr 12 16:16:24 2013 +0200
Merge across the rename
-
commit 6ce3c4ff690136099bb17e1a8766b75764726ea7
Author: Thomas Rast <trast@student.ethz.ch>
Date: Thu Feb 28 10:49:50 2013 +0100
diff --git a/t/t4211/sha256/expect.parallel-change-f-to-main b/t/t4211/sha256/expect.parallel-change-f-to-main
index 3178989253..c93e03bef4 100644
--- a/t/t4211/sha256/expect.parallel-change-f-to-main
+++ b/t/t4211/sha256/expect.parallel-change-f-to-main
@@ -5,7 +5,6 @@ Date: Fri Apr 12 16:16:24 2013 +0200
Merge across the rename
-
commit 4f7a58195a92c400e28a2354328587f1ff14fb77f5cf894536f17ccbc72931b9
Author: Thomas Rast <trast@student.ethz.ch>
Date: Thu Feb 28 10:49:50 2013 +0100
--
gitgitgadget
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 3/3] line-log: allow non-patch diff formats with -L
2026-04-28 4:05 [PATCH 0/3] line-log: integrate -L with the standard log output pipeline Michael Montalbo via GitGitGadget
2026-04-28 4:05 ` [PATCH 1/3] revision: move -L setup before output_format-to-diff derivation Michael Montalbo via GitGitGadget
2026-04-28 4:05 ` [PATCH 2/3] line-log: integrate -L output with the standard log-tree pipeline Michael Montalbo via GitGitGadget
@ 2026-04-28 4:05 ` Michael Montalbo via GitGitGadget
2026-05-12 4:01 ` [PATCH 0/3] line-log: integrate -L with the standard log output pipeline Junio C Hamano
3 siblings, 0 replies; 5+ messages in thread
From: Michael Montalbo via GitGitGadget @ 2026-04-28 4:05 UTC (permalink / raw)
To: git; +Cc: Michael Montalbo, Michael Montalbo
From: Michael Montalbo <mmontalbo@gmail.com>
Now that -L flows through log_tree_diff_flush() and diff_flush(),
metadata-only diff formats work because they only read filepair
fields (status, mode, path, oid) already set on the pre-computed
pairs.
Expand the allowlist in setup_revisions() to also accept --raw,
--name-only, --name-status, and --summary. Diff stat formats
(--stat, --numstat, --shortstat, --dirstat) remain blocked because
they call compute_diffstat() on full blob content and would show
whole-file statistics rather than range-scoped ones.
Signed-off-by: Michael Montalbo <mmontalbo@gmail.com>
---
Documentation/line-range-options.adoc | 10 +++---
revision.c | 7 ++--
t/t4211-line-log.sh | 47 +++++++++++++++++++++++++--
3 files changed, 56 insertions(+), 8 deletions(-)
diff --git a/Documentation/line-range-options.adoc b/Documentation/line-range-options.adoc
index ecb2c79fb9..72f639b5e7 100644
--- a/Documentation/line-range-options.adoc
+++ b/Documentation/line-range-options.adoc
@@ -8,12 +8,14 @@
give zero or one positive revision arguments, and
_<start>_ and _<end>_ (or _<funcname>_) must exist in the starting revision.
You can specify this option more than once. Implies `--patch`.
- Patch output can be suppressed using `--no-patch`, but other diff formats
- (namely `--raw`, `--numstat`, `--shortstat`, `--dirstat`, `--summary`,
- `--name-only`, `--name-status`, `--check`) are not currently implemented.
+ Patch output can be suppressed using `--no-patch`.
+ Non-patch diff formats `--raw`, `--name-only`, `--name-status`,
+ and `--summary` are supported. Diff stat formats
+ (`--stat`, `--numstat`, `--shortstat`, `--dirstat`) are not
+ currently implemented.
+
Patch formatting options such as `--word-diff`, `--color-moved`,
`--no-prefix`, and whitespace options (`-w`, `-b`) are supported,
-as are pickaxe options (`-S`, `-G`).
+as are pickaxe options (`-S`, `-G`) and `--diff-filter`.
+
include::line-range-format.adoc[]
diff --git a/revision.c b/revision.c
index a1c795de96..b41ec4016b 100644
--- a/revision.c
+++ b/revision.c
@@ -3179,8 +3179,11 @@ int setup_revisions(int argc, const char **argv, struct rev_info *revs, struct s
die(_("the option '%s' requires '%s'"), "--grep-reflog", "--walk-reflogs");
if (revs->line_level_traverse &&
- (revs->diffopt.output_format & ~(DIFF_FORMAT_PATCH | DIFF_FORMAT_NO_OUTPUT)))
- die(_("-L does not yet support diff formats besides -p and -s"));
+ (revs->diffopt.output_format &
+ ~(DIFF_FORMAT_PATCH | DIFF_FORMAT_NO_OUTPUT |
+ DIFF_FORMAT_RAW | DIFF_FORMAT_NAME |
+ DIFF_FORMAT_NAME_STATUS | DIFF_FORMAT_SUMMARY)))
+ die(_("-L does not yet support the requested diff format"));
if (revs->line_level_traverse && revs->full_diff)
die(_("-L is not compatible with --full-diff"));
diff --git a/t/t4211-line-log.sh b/t/t4211-line-log.sh
index 1d566ea9bd..63cf8e5d9f 100755
--- a/t/t4211-line-log.sh
+++ b/t/t4211-line-log.sh
@@ -155,8 +155,45 @@ test_expect_success '-p shows the default patch output' '
test_cmp expect actual
'
-test_expect_success '--raw is forbidden' '
- test_must_fail git log -L1,24:b.c --raw
+test_expect_success '--raw shows mode, oid, status and path' '
+ git log -L1,24:b.c --raw --format= >actual &&
+ grep "^:100644 100644 [0-9a-f]\{7\} [0-9a-f]\{7\} M b.c$" actual &&
+ ! grep "^diff --git" actual &&
+ ! grep "^@@" actual
+'
+
+test_expect_success '--name-only shows path' '
+ git log -L1,24:b.c --name-only --format= >actual &&
+ grep "^b.c$" actual &&
+ ! grep "^diff --git" actual &&
+ ! grep "^@@" actual
+'
+
+test_expect_success '--name-status shows status and path' '
+ git log -L1,24:b.c --name-status --format= >actual &&
+ grep "^M b.c$" actual &&
+ ! grep "^diff --git" actual &&
+ ! grep "^@@" actual
+'
+
+test_expect_success '--stat is not yet supported with -L' '
+ test_must_fail git log -L1,24:b.c --stat 2>err &&
+ test_grep "does not yet support" err
+'
+
+test_expect_success '--numstat is not yet supported with -L' '
+ test_must_fail git log -L1,24:b.c --numstat 2>err &&
+ test_grep "does not yet support" err
+'
+
+test_expect_success '--shortstat is not yet supported with -L' '
+ test_must_fail git log -L1,24:b.c --shortstat 2>err &&
+ test_grep "does not yet support" err
+'
+
+test_expect_success '--dirstat is not yet supported with -L' '
+ test_must_fail git log -L1,24:b.c --dirstat 2>err &&
+ test_grep "does not yet support" err
'
test_expect_success 'setup for checking fancy rename following' '
@@ -737,4 +774,10 @@ test_expect_success '-L --oneline has no extra blank line before diff' '
sed -n 2p actual | grep "^diff --git"
'
+test_expect_success '--summary shows new file on root commit' '
+ git checkout parent-oids &&
+ git log -L:func2:file.c --summary --format= >actual &&
+ grep "create mode 100644 file.c" actual
+'
+
test_done
--
gitgitgadget
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH 0/3] line-log: integrate -L with the standard log output pipeline
2026-04-28 4:05 [PATCH 0/3] line-log: integrate -L with the standard log output pipeline Michael Montalbo via GitGitGadget
` (2 preceding siblings ...)
2026-04-28 4:05 ` [PATCH 3/3] line-log: allow non-patch diff formats with -L Michael Montalbo via GitGitGadget
@ 2026-05-12 4:01 ` Junio C Hamano
3 siblings, 0 replies; 5+ messages in thread
From: Junio C Hamano @ 2026-05-12 4:01 UTC (permalink / raw)
To: git, Michael Montalbo via GitGitGadget; +Cc: Michael Montalbo
"Michael Montalbo via GitGitGadget" <gitgitgadget@gmail.com> writes:
> Since its introduction, git log -L has short-circuited from
> log_tree_commit() into its own output function, bypassing log_tree_diff()
> and log_tree_diff_flush(). This skips no_free save/restore,
> always_show_header, diff_free() cleanup, and means that pickaxe (-S, -G,
> --find-object) and --diff-filter cannot suppress commits whose pairs are all
> filtered out, because show_log() runs before diffcore_std().
>
> This series restructures the flow so that -L goes through the same
> log_tree_diff() -> log_tree_diff_flush() path as normal single-parent and
> merge diffs, then uses that to enable several non-patch diff formats.
This unfortunately saw no reviews and
https://lore.kernel.org/git/pull.2094.git.1777349126.gitgitgadget@gmail.com/
does not show the previous rouns so I am assuming nobody is
interested in the topic?
Or are people more busily writing their own patches than reviewing
others' patches? Unfortunately that is not sustainable.
> Patch 1: revision: move -L setup before output_format-to-diff derivation
>
> Preparatory reorder in setup_revisions(). The -L block sets a default
> DIFF_FORMAT_PATCH when no format is requested; move it before the derivation
> of revs->diff from output_format so the default is visible to that check. No
> behavior change on its own.
>
> Patch 2: line-log: integrate -L output with the standard log-tree pipeline
>
> Rename line_log_print() to line_log_queue_pairs(), stripping it down to only
> queue pre-computed filepairs. log_tree_diff_flush() handles show_log(),
> diffcore_std(), and diff_flush(). This fixes pickaxe and --diff-filter
> suppression, and aligns the commit/diff separator with the rest of log
> output. Also rejects --full-diff, which is meaningless when filepairs are
> pre-computed.
>
> Patch 3: line-log: allow non-patch diff formats with -L
>
> Expand the allowlist to accept --raw, --name-only, --name-status, and
> --summary. These only read filepair metadata already set by the line-log
> machinery. Diff stat formats (--stat, --numstat, --shortstat, --dirstat)
> remain blocked because they call compute_diffstat() on full blob content and
> would show whole-file statistics rather than range-scoped ones.
>
> Michael Montalbo (3):
> revision: move -L setup before output_format-to-diff derivation
> line-log: integrate -L output with the standard log-tree pipeline
> line-log: allow non-patch diff formats with -L
>
> Documentation/line-range-options.adoc | 10 +-
> line-log.c | 30 ++----
> line-log.h | 2 +-
> log-tree.c | 9 +-
> revision.c | 25 +++--
> t/t4211-line-log.sh | 99 ++++++++++++++++---
> t/t4211/sha1/expect.parallel-change-f-to-main | 1 -
> .../sha256/expect.parallel-change-f-to-main | 1 -
> 8 files changed, 120 insertions(+), 57 deletions(-)
>
>
> base-commit: 9f223ef1c026d91c7ac68cc0211bde255dda6199
> Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-2094%2Fmmontalbo%2Fmm%2Fline-log-use-log-tree-diff-flush-v1
> Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-2094/mmontalbo/mm/line-log-use-log-tree-diff-flush-v1
> Pull-Request: https://github.com/gitgitgadget/git/pull/2094
^ permalink raw reply [flat|nested] 5+ messages in thread