[PATCH RFC 0/2] builtin/history: change git history reword behavior and feedback

[PATCH RFC 0/2] builtin/history: change git history reword behavior and feedback

[Pablo Sabater]

This small series contains two commits that aim to improve
`git history reword`:
1. Abort the reword when the original message and the new message are
   the same to avoid unnecessary history changes.
2. Print feedback after a successful reword so the user knows about it.

`git commit --amend` and `git rebase -i` with reword don't abort if
the commit message is the same as the original and they update as if
it was a new message in favor of changing this behavior for
`git history reword`:
- As noted in the `git history` documentation, the command by
  default updates all branches that contain the original commit [1]
  this makes `git history reword` more expensive than other options
  like `git rebase -i` that only updates the current branch.
- `git history` works in-memory without touching the worktree or index
  [2], because it doesn't use the sequencer and `git history reword`
  doesn't care about the staged files only about the commit message, it
  should have no problems.

About the last fact in favor of 1, I'm not completely sure if it's
because of staged files that's the reason why `git commit --amend` or
`git rebase -i` with reword still updates even if the commit message
is the same one. I'm not very up to sequencer.c to be sure but maybe
there's a historical reason about it that someone knows. Anyways I
believe that given this new command is a good idea to discuss it.

The commit message of 1 mentions staged files as a possible justification
for why --amend and rebase behave this way, but that's just an
assumption that I'll be happy to change if I'm wrong.

[1]: https://git-scm.com/docs/git-history#_description
[2]: https://lore.kernel.org/git/20260113-b4-pks-history-builtin-v11-8-e74ebfa2652d@pks.im/

To: git@vger.kernel.org
Cc: Patrick Steinhardt <ps@pks.im>
Cc: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>

Signed-off-by: Pablo Sabater <pabloosabaterr@gmail.com>
---
Pablo Sabater (2):
      builtin/history: abort reword on unchanged message
      builtin/history: print feedback after successful reword

 builtin/history.c         | 14 ++++++++++++++
 t/t3451-history-reword.sh | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 48 insertions(+)
---
base-commit: 9ac3f193c05c2237e2b14ebaa1149e9fc8a1abe0
change-id: 20260607-ps-history-reword-fcb70eaa4aa9

Best regards,
--  
Pablo Sabater <pabloosabaterr@gmail.com>

[PATCH RFC 1/2] builtin/history: abort reword on unchanged message

[Pablo Sabater]

When using `git history reword` if the new message is the same as the
original it continues anyway creating a new commit with the same
message and updates its descendants, modifying the history after this
'reworded' commit even though there was no actual change.

`git commit --amend` and `git rebase -i` + reword share this behavior,
however `git history reword` is different:
1. Works in-memory without touching the index or the worktree [1], so
   there are no side effects like staged files that could justify
   rewriting the history when the commit message is the same.
2. `git history` by default updates all the branches [2] that contain the
   original commit making it more costly than `git rebase -i` that only
   updates the current branch.

Add a check if the original commit message is the same as the new one
and abort if so.

[1]: https://lore.kernel.org/git/20260113-b4-pks-history-builtin-v11-8-e74ebfa2652d@pks.im/
[2]: https://git-scm.com/docs/git-history#_description

Signed-off-by: Pablo Sabater <pabloosabaterr@gmail.com>
---
 builtin/history.c         | 10 ++++++++++
 t/t3451-history-reword.sh | 20 ++++++++++++++++++++
 2 files changed, 30 insertions(+)

diff --git a/builtin/history.c b/builtin/history.c
index 0fc06fb204..51a22a9a1c 100644
--- a/builtin/history.c
+++ b/builtin/history.c
@@ -135,6 +135,13 @@ static int commit_tree_ext(struct repository *repo,
 					  original_body, action, &commit_message);
 		if (ret < 0)
 			goto out;
+
+		if (!strcmp(original_body, commit_message.buf)) {
+			fprintf(stderr, _("Message unchanged,"
+					  " aborting reword.\n"));
+			ret = 1;
+			goto out;
+		}
 	} else {
 		strbuf_addstr(&commit_message, original_body);
 	}
@@ -718,6 +725,9 @@ static int cmd_history_reword(int argc,
 	if (ret < 0) {
 		ret = error(_("failed writing reworded commit"));
 		goto out;
+	} else if (ret == 1) {
+		ret = 0;
+		goto out;
 	}
 
 	strbuf_addf(&reflog_msg, "reword: updating %s", argv[0]);
diff --git a/t/t3451-history-reword.sh b/t/t3451-history-reword.sh
index de7b357685..54ea8a7207 100755
--- a/t/t3451-history-reword.sh
+++ b/t/t3451-history-reword.sh
@@ -396,4 +396,24 @@ test_expect_success 'retains changes in the worktree and index' '
 	)
 '
 
+test_expect_success 'aborts if the commit message is the same' '
+	test_when_finished "rm -rf repo" &&
+	git init repo &&
+	(
+		cd repo &&
+		test_commit first &&
+		test_commit second &&
+
+		git rev-parse HEAD >oid-before &&
+		write_script fake-editor.sh <<-\EOF &&
+		true
+		EOF
+		test_set_editor "$(pwd)"/fake-editor.sh &&
+		git history reword HEAD 2>err &&
+		git rev-parse HEAD >oid-after &&
+		test_cmp oid-before oid-after &&
+		test_grep "Message unchanged" err
+	)
+'
+
 test_done

-- 
2.54.0

[PATCH RFC 2/2] builtin/history: print feedback after successful reword

[Pablo Sabater]

Unlike `git commit --amend` and `git rebase -i`, `git history reword`
doesn't print anything, this makes it feel empty for a porcelain command
and hard to tell if the command did anything without using other
commands like `git log <commit>` to check if the reword was done.

Print a message on successful rewords so the user has feedback about it.

Signed-off-by: Pablo Sabater <pabloosabaterr@gmail.com>
---
 builtin/history.c         |  4 ++++
 t/t3451-history-reword.sh | 14 ++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/builtin/history.c b/builtin/history.c
index 51a22a9a1c..0f1ba3b531 100644
--- a/builtin/history.c
+++ b/builtin/history.c
@@ -739,6 +739,10 @@ static int cmd_history_reword(int argc,
 		goto out;
 	}
 
+	fprintf(stderr, _("Successfully reworded commit %s to %s\n"),
+		repo_find_unique_abbrev(repo, &original->object.oid, DEFAULT_ABBREV),
+		repo_find_unique_abbrev(repo, &rewritten->object.oid, DEFAULT_ABBREV));
+
 	ret = 0;
 
 out:
diff --git a/t/t3451-history-reword.sh b/t/t3451-history-reword.sh
index 54ea8a7207..4b22d761e3 100755
--- a/t/t3451-history-reword.sh
+++ b/t/t3451-history-reword.sh
@@ -416,4 +416,18 @@ test_expect_success 'aborts if the commit message is the same' '
 	)
 '
 
+test_expect_success 'prints feedback on successful reword' '
+	test_when_finished "rm -rf repo" &&
+	git init repo &&
+	(
+		cd repo &&
+		test_commit first &&
+
+		reword_with_message HEAD 2>err <<-EOF &&
+		first reworded
+		EOF
+		test_grep "Successfully reworded" err
+	)
+'
+
 test_done

-- 
2.54.0

Re: [PATCH RFC 1/2] builtin/history: abort reword on unchanged message

[Patrick Steinhardt]

On Sun, Jun 07, 2026 at 10:07:20PM +0200, Pablo Sabater wrote:
> When using `git history reword` if the new message is the same as the
> original it continues anyway creating a new commit with the same
> message and updates its descendants, modifying the history after this
> 'reworded' commit even though there was no actual change.
> 
> `git commit --amend` and `git rebase -i` + reword share this behavior,
> however `git history reword` is different:
> 1. Works in-memory without touching the index or the worktree [1], so
>    there are no side effects like staged files that could justify
>    rewriting the history when the commit message is the same.
> 2. `git history` by default updates all the branches [2] that contain the
>    original commit making it more costly than `git rebase -i` that only
>    updates the current branch.
> 
> Add a check if the original commit message is the same as the new one
> and abort if so.
> 
> [1]: https://lore.kernel.org/git/20260113-b4-pks-history-builtin-v11-8-e74ebfa2652d@pks.im/
> [2]: https://git-scm.com/docs/git-history#_description

Nit: I feel like both of the links don't really add much value.

> Signed-off-by: Pablo Sabater <pabloosabaterr@gmail.com>
> ---
>  builtin/history.c         | 10 ++++++++++
>  t/t3451-history-reword.sh | 20 ++++++++++++++++++++
>  2 files changed, 30 insertions(+)
> 
> diff --git a/builtin/history.c b/builtin/history.c
> index 0fc06fb204..51a22a9a1c 100644
> --- a/builtin/history.c
> +++ b/builtin/history.c
> @@ -135,6 +135,13 @@ static int commit_tree_ext(struct repository *repo,
>  					  original_body, action, &commit_message);
>  		if (ret < 0)
>  			goto out;
> +
> +		if (!strcmp(original_body, commit_message.buf)) {
> +			fprintf(stderr, _("Message unchanged,"
> +					  " aborting reword.\n"));
> +			ret = 1;
> +			goto out;
> +		}
>  	} else {
>  		strbuf_addstr(&commit_message, original_body);
>  	}

We also execute this logic via "git history fixup --reedit-message", and
here it wouldn't make sense to abort the commit in case the message is
unchanged.

Patrick

Re: [PATCH RFC 2/2] builtin/history: print feedback after successful reword

[Patrick Steinhardt]

On Sun, Jun 07, 2026 at 10:07:21PM +0200, Pablo Sabater wrote:
> Unlike `git commit --amend` and `git rebase -i`, `git history reword`
> doesn't print anything, this makes it feel empty for a porcelain command
> and hard to tell if the command did anything without using other
> commands like `git log <commit>` to check if the reword was done.
> 
> Print a message on successful rewords so the user has feedback about it.

I dunno about this one. My take here is that a command should be silent
unless it has something to say, for example when it couldn't honor the
user's request [1].

> diff --git a/builtin/history.c b/builtin/history.c
> index 51a22a9a1c..0f1ba3b531 100644
> --- a/builtin/history.c
> +++ b/builtin/history.c
> @@ -739,6 +739,10 @@ static int cmd_history_reword(int argc,
>  		goto out;
>  	}
>  
> +	fprintf(stderr, _("Successfully reworded commit %s to %s\n"),
> +		repo_find_unique_abbrev(repo, &original->object.oid, DEFAULT_ABBREV),
> +		repo_find_unique_abbrev(repo, &rewritten->object.oid, DEFAULT_ABBREV));
> +

Seeing the implementation also raises a couple of questions:

  - Why do we mention the rewritten commit, only? Shouldn't we also
    print the changed HEAD?

  - Why don't we print any of the other rewritten branches?

  - What makes "git history reword" so special as compared to for
    example "git history fixup" or "git history split" so that it needs
    a message while the others don't?

It might make sense to maybe introduce a verbose mode where we do print
such information. But if so, we should have good answers to the above
questions and implement this in a way that makes sense for the other
subcommands, too, so that we can apply the same principle to all of
them.

Thanks!

Patrick

[1]: https://www.linfo.org/rule_of_silence.html

Re: [PATCH RFC 2/2] builtin/history: print feedback after successful reword

[Pablo Sabater]

El lun, 8 jun 2026 a las 11:30, Patrick Steinhardt (<ps@pks.im>) escribió:
>
> On Sun, Jun 07, 2026 at 10:07:21PM +0200, Pablo Sabater wrote:
> > Unlike `git commit --amend` and `git rebase -i`, `git history reword`
> > doesn't print anything, this makes it feel empty for a porcelain command
> > and hard to tell if the command did anything without using other
> > commands like `git log <commit>` to check if the reword was done.
> >
> > Print a message on successful rewords so the user has feedback about it.
>
> I dunno about this one. My take here is that a command should be silent
> unless it has something to say, for example when it couldn't honor the
> user's request [1].

But neither `git commit --amend` nor `git rebase -i` follow this rule
of silence.
>
> > diff --git a/builtin/history.c b/builtin/history.c
> > index 51a22a9a1c..0f1ba3b531 100644
> > --- a/builtin/history.c
> > +++ b/builtin/history.c
> > @@ -739,6 +739,10 @@ static int cmd_history_reword(int argc,
> >               goto out;
> >       }
> >
> > +     fprintf(stderr, _("Successfully reworded commit %s to %s\n"),
> > +             repo_find_unique_abbrev(repo, &original->object.oid, DEFAULT_ABBREV),
> > +             repo_find_unique_abbrev(repo, &rewritten->object.oid, DEFAULT_ABBREV));
> > +
>
> Seeing the implementation also raises a couple of questions:
>
>   - Why do we mention the rewritten commit, only? Shouldn't we also
>     print the changed HEAD?

Because `git history reword <commit>` is for a single commit. After
the reword the hash changes and the original hash is no longer useful
to check the rewritten message. If I want to see how it is now:

  $ git history reword aabb
  $ git log aabb <- I can't check how it is now because this is the old one

So to check the new one I have to search the new hash. Imagine if it's
the first of 20 long commit messages, I have to git log --oneline, get
the hash and then git log new_hash, which IMO is unnecessary when git
history reword can output the new hash.

>
>   - Why don't we print any of the other rewritten branches?

Haven't thought of that, it's nice that it does modify all branches, I
just assumed that the most relevant is the current branch new commit
hash. The other rewritten branches have the same commit message, just
different hashes.

>
>   - What makes "git history reword" so special as compared to for
>     example "git history fixup" or "git history split" so that it needs
>     a message while the others don't?

Nothing, I just wanted this specifically for reword and sent this very
simple as an RFC to discuss the idea, I could extend this where it
fits.

>
> It might make sense to maybe introduce a verbose mode where we do print
> such information. But if so, we should have good answers to the above
> questions and implement this in a way that makes sense for the other
> subcommands, too, so that we can apply the same principle to all of
> them.

I like the verbose mode idea but I still think that on non-verbose
something should be printed, on verbose it could be printed
additionally all the rewritten commits (though it could get very
noisy), the changed HEAD, etc.

>
> Thanks!
>
> Patrick
>
> [1]: https://www.linfo.org/rule_of_silence.html

--
Pablo

Re: [PATCH RFC 1/2] builtin/history: abort reword on unchanged message

[Pablo Sabater]

El lun, 8 jun 2026 a las 11:30, Patrick Steinhardt (<ps@pks.im>) escribió:
>
> On Sun, Jun 07, 2026 at 10:07:20PM +0200, Pablo Sabater wrote:
> > When using `git history reword` if the new message is the same as the
> > original it continues anyway creating a new commit with the same
> > message and updates its descendants, modifying the history after this
> > 'reworded' commit even though there was no actual change.
> >
> > `git commit --amend` and `git rebase -i` + reword share this behavior,
> > however `git history reword` is different:
> > 1. Works in-memory without touching the index or the worktree [1], so
> >    there are no side effects like staged files that could justify
> >    rewriting the history when the commit message is the same.
> > 2. `git history` by default updates all the branches [2] that contain the
> >    original commit making it more costly than `git rebase -i` that only
> >    updates the current branch.
> >
> > Add a check if the original commit message is the same as the new one
> > and abort if so.
> >
> > [1]: https://lore.kernel.org/git/20260113-b4-pks-history-builtin-v11-8-e74ebfa2652d@pks.im/
> > [2]: https://git-scm.com/docs/git-history#_description
>
> Nit: I feel like both of the links don't really add much value.

I'll just drop em.

>
> > Signed-off-by: Pablo Sabater <pabloosabaterr@gmail.com>
> > ---
> >  builtin/history.c         | 10 ++++++++++
> >  t/t3451-history-reword.sh | 20 ++++++++++++++++++++
> >  2 files changed, 30 insertions(+)
> >
> > diff --git a/builtin/history.c b/builtin/history.c
> > index 0fc06fb204..51a22a9a1c 100644
> > --- a/builtin/history.c
> > +++ b/builtin/history.c
> > @@ -135,6 +135,13 @@ static int commit_tree_ext(struct repository *repo,
> >                                         original_body, action, &commit_message);
> >               if (ret < 0)
> >                       goto out;
> > +
> > +             if (!strcmp(original_body, commit_message.buf)) {
> > +                     fprintf(stderr, _("Message unchanged,"
> > +                                       " aborting reword.\n"));
> > +                     ret = 1;
> > +                     goto out;
> > +             }
> >       } else {
> >               strbuf_addstr(&commit_message, original_body);
> >       }
>
> We also execute this logic via "git history fixup --reedit-message", and
> here it wouldn't make sense to abort the commit in case the message is
> unchanged.

True I hadn't thought that, I made it here because we have both the
original and new message before creating the new commit. We could let
ret = 1 mean that the commit message is the same and then
cmd_history_fixup ignores ret = 1 and for cmd_history_reword handle
the abort.
What do you think?

>
> Patrick

--
Pablo

Re: [PATCH RFC 2/2] builtin/history: print feedback after successful reword

[Junio C Hamano]

Pablo Sabater <pabloosabaterr@gmail.com> writes:

> Unlike `git commit --amend` and `git rebase -i`, `git history reword`
> doesn't print anything, this makes it feel empty for a porcelain command
> and hard to tell if the command did anything without using other
> commands like `git log <commit>` to check if the reword was done.
>
> Print a message on successful rewords so the user has feedback about it.
>
> Signed-off-by: Pablo Sabater <pabloosabaterr@gmail.com>
> ---
>  builtin/history.c         |  4 ++++
>  t/t3451-history-reword.sh | 14 ++++++++++++++
>  2 files changed, 18 insertions(+)
>
> diff --git a/builtin/history.c b/builtin/history.c
> index 51a22a9a1c..0f1ba3b531 100644
> --- a/builtin/history.c
> +++ b/builtin/history.c
> @@ -739,6 +739,10 @@ static int cmd_history_reword(int argc,
>  		goto out;
>  	}
>  
> +	fprintf(stderr, _("Successfully reworded commit %s to %s\n"),
> +		repo_find_unique_abbrev(repo, &original->object.oid, DEFAULT_ABBREV),
> +		repo_find_unique_abbrev(repo, &rewritten->object.oid, DEFAULT_ABBREV));
> +
>  	ret = 0;
>  
>  out:

Do other commands in "git history" (split is in 'master', drop and
fixup are cooking) behave with similar verbosity?  Consistency within
the same "history" umbrella matters more than being similar with
other commands that can be used for similar purposes.

> diff --git a/t/t3451-history-reword.sh b/t/t3451-history-reword.sh
> index 54ea8a7207..4b22d761e3 100755
> --- a/t/t3451-history-reword.sh
> +++ b/t/t3451-history-reword.sh
> @@ -416,4 +416,18 @@ test_expect_success 'aborts if the commit message is the same' '
>  	)
>  '
>  
> +test_expect_success 'prints feedback on successful reword' '
> +	test_when_finished "rm -rf repo" &&
> +	git init repo &&
> +	(
> +		cd repo &&
> +		test_commit first &&
> +
> +		reword_with_message HEAD 2>err <<-EOF &&
> +		first reworded
> +		EOF
> +		test_grep "Successfully reworded" err
> +	)
> +'
> +
>  test_done

Re: [PATCH RFC 1/2] builtin/history: abort reword on unchanged message

[Junio C Hamano]

Pablo Sabater <pabloosabaterr@gmail.com> writes:

> When using `git history reword` if the new message is the same as the
> original it continues anyway creating a new commit with the same
> message and updates its descendants, modifying the history after this
> 'reworded' commit even though there was no actual change.
>
> `git commit --amend` and `git rebase -i` + reword share this behavior,
> however `git history reword` is different:
> 1. Works in-memory without touching the index or the worktree [1], so
>    there are no side effects like staged files that could justify
>    rewriting the history when the commit message is the same.
> 2. `git history` by default updates all the branches [2] that contain the
>    original commit making it more costly than `git rebase -i` that only
>    updates the current branch.

I think the reasoning is flawed.

Both "git commit --amend" and "git rebase -i", even with no changes
to the tree, parents, or the message, update the committer timestamp
(and perhaps the committer identity running the command may be
different from the original).  Updating this info is one of the
important effects of the command.

And "history" being more capable than "rebase" is a wrong excuse to
make the system behave inconsistently between commands that have
similar features [*1*].  In a situation where letting 'history'
update all the relevant branches, if a command behaves differently
from the way the user likes (and if the way 'rebase -i' works is the
one the user likes), you'd end up forcing the user to use 'rebase
-i' when 'history' would have been more appropriate.

Having said that, I personally think that the current behaviour of
`commit --amend` and `history reword` are both _wrong_ [*2*].

You may start `git commit --amend`, and after staring at the
existing commit log message for some time in your editor, it is
quite natural for you to decide that leaving the commit as-is is the
right thing [*3*] in your situation.  It may have been a better
design for the system to notice this situation and leave the commit
as-is, with an override option `--force` to allow users to forcibly
update the committer ident and timestamp in the commit header.  I am
not a `history reword` user (yet), but from the motivation you
described for this patch, I sense that the story is the same there.

`git rebase -i A`, when A is truly an ancestor at the bottom of a
linear history leading to HEAD, behaves slightly better.  It gives
you a todo list with a bunch of `pick` insns, and when you do not
edit earliest 'pick's the todo list, these earliest commits are left
as-is.  It may still share the same issue that a 'reword' that you
ended up not rewording (or 'edit' that you ended up not touching its
tree or log message) does still recreate a new commit object, though.

`git rebase -i` may have an excuse that because it, unlike "git
commit --amend", operates on multiple commits by design.  A single
"--force" option given to the command would not have worked as an
escape hatch to allow the user to tell the command "in this reword
of this particular commit, I ended up doing nothing, but I still
want an updated committer log timestamp".  Perhaps giving the
"--force" (or --force-rewrite") option at "rebase --continue" time
may work, but in any case, unless we plan to transition to these
"better" default behaviour at a big version boundary, speculating
what a "better" behaviour would have been may be fun but not very
productive.


[Footnote]

 *1* Besides, doesn't "--update-refs" in "rebase -i" allow you to
     adjust the branches?

 *2* But it is an established behaviour people _rely_ on, so even
     though it may have been better if these commands behaved
     differently, it probably is a bit too late to change it now.

 *3* This includes the case where the original author is especially
     difficult to work with and would complain any change to their
     commits, even if the only change you made for them is a
     typofix.  Fixing a small typo/grammo may not be worth your time
     and unpleasant exchanges with them after touching their commit.

Re: [PATCH RFC 2/2] builtin/history: print feedback after successful reword

[Pablo Sabater]

El lun, 8 jun 2026 a las 14:16, Junio C Hamano (<gitster@pobox.com>) escribió:
>
> Pablo Sabater <pabloosabaterr@gmail.com> writes:
>
> > Unlike `git commit --amend` and `git rebase -i`, `git history reword`
> > doesn't print anything, this makes it feel empty for a porcelain command
> > and hard to tell if the command did anything without using other
> > commands like `git log <commit>` to check if the reword was done.
> >
> > Print a message on successful rewords so the user has feedback about it.
> >
> > Signed-off-by: Pablo Sabater <pabloosabaterr@gmail.com>
> > ---
> >  builtin/history.c         |  4 ++++
> >  t/t3451-history-reword.sh | 14 ++++++++++++++
> >  2 files changed, 18 insertions(+)
> >
> > diff --git a/builtin/history.c b/builtin/history.c
> > index 51a22a9a1c..0f1ba3b531 100644
> > --- a/builtin/history.c
> > +++ b/builtin/history.c
> > @@ -739,6 +739,10 @@ static int cmd_history_reword(int argc,
> >               goto out;
> >       }
> >
> > +     fprintf(stderr, _("Successfully reworded commit %s to %s\n"),
> > +             repo_find_unique_abbrev(repo, &original->object.oid, DEFAULT_ABBREV),
> > +             repo_find_unique_abbrev(repo, &rewritten->object.oid, DEFAULT_ABBREV));
> > +
> >       ret = 0;
> >
> >  out:
>
> Do other commands in "git history" (split is in 'master', drop and
> fixup are cooking) behave with similar verbosity?  Consistency within
> the same "history" umbrella matters more than being similar with
> other commands that can be used for similar purposes.

They do not, they are thought with the rule of silence in mind.
However I think that this output is valuable information I might have
explained myself better at [1] but my thought is:

git history reword aabb

Now that I have my commit aabb rewritten I want to check it again just
to make sure I did what I wanted correctly, but git log aabb is still
the old commit, the rewritten one has a different hash which I do not
know unless I search for it, if it's far from HEAD I'd have to git log
--oneline, get the hash and then git log new_hash. I think that git
history reword that does have the information about the new hash
should print it to avoid this search.
What I want is something like:

git history reword aabb
Successfully reworded aabb to ccdd

So I can just git log ccdd without having to search.

I want to say I haven't looked as much as I'd like to split, drop and
fixup, but I think it would be a good addition for them also. On [1]
Patrick wrote about a --verbose for git history, I think that the
basic information i.e. at reword which is the new hash should be
always printed but if it's preferred it could go there.

For split it can print the hashes of the new commits like:
"...split into ccdd and eeff."
For fixup the commit hash also changes, so the same as reword.
The one that will have more friction would be drop is the one that
doesn't end up with new commits.

[1]: https://lore.kernel.org/git/CAN5EUNSAOMRvmLGVfzQiwWoOn9VGNVU5rVMZizOryn_q2fbCNA@mail.gmail.com/

>
> > diff --git a/t/t3451-history-reword.sh b/t/t3451-history-reword.sh
> > index 54ea8a7207..4b22d761e3 100755
> > --- a/t/t3451-history-reword.sh
> > +++ b/t/t3451-history-reword.sh
> > @@ -416,4 +416,18 @@ test_expect_success 'aborts if the commit message is the same' '
> >       )
> >  '
> >
> > +test_expect_success 'prints feedback on successful reword' '
> > +     test_when_finished "rm -rf repo" &&
> > +     git init repo &&
> > +     (
> > +             cd repo &&
> > +             test_commit first &&
> > +
> > +             reword_with_message HEAD 2>err <<-EOF &&
> > +             first reworded
> > +             EOF
> > +             test_grep "Successfully reworded" err
> > +     )
> > +'
> > +
> >  test_done