From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [PATCH i-g-t 7/8] tests/kms_render: Copy all planes when copying fb
Date: Tue, 23 Jan 2018 13:56:41 +0100 [thread overview]
Message-ID: <20180123125642.58698-8-maarten.lankhorst@linux.intel.com> (raw)
In-Reply-To: <20180123125642.58698-1-maarten.lankhorst@linux.intel.com>
This is required to make the test pass when we start enabling
planar formats in the future.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
lib/intel_batchbuffer.c | 14 ++++++++------
lib/intel_batchbuffer.h | 4 ++--
tests/gem_concurrent_all.c | 4 ++--
tests/gem_read_read_speed.c | 4 ++--
tests/kms_render.c | 15 +++++++++------
5 files changed, 23 insertions(+), 18 deletions(-)
diff --git a/lib/intel_batchbuffer.c b/lib/intel_batchbuffer.c
index 3c1689cd302c..9f162f09658a 100644
--- a/lib/intel_batchbuffer.c
+++ b/lib/intel_batchbuffer.c
@@ -310,10 +310,12 @@ intel_batchbuffer_data(struct intel_batchbuffer *batch,
* intel_blt_copy:
* @batch: batchbuffer object
* @src_bo: source libdrm buffer object
+ * @src_delta: offset into the source bo, in bytes
* @src_x1: source pixel x-coordination
* @src_y1: source pixel y-coordination
* @src_pitch: @src_bo's pitch in bytes
* @dst_bo: destination libdrm buffer object
+ * @sdst_delta: offset into the source bo, in bytes
* @dst_x1: destination pixel x-coordination
* @dst_y1: destination pixel y-coordination
* @dst_pitch: @dst_bo's pitch in bytes
@@ -326,8 +328,8 @@ intel_batchbuffer_data(struct intel_batchbuffer *batch,
*/
void
intel_blt_copy(struct intel_batchbuffer *batch,
- drm_intel_bo *src_bo, int src_x1, int src_y1, int src_pitch,
- drm_intel_bo *dst_bo, int dst_x1, int dst_y1, int dst_pitch,
+ drm_intel_bo *src_bo, uint32_t src_delta, int src_x1, int src_y1, int src_pitch,
+ drm_intel_bo *dst_bo, uint32_t dst_delta, int dst_x1, int dst_y1, int dst_pitch,
int width, int height, int bpp)
{
const int gen = batch->gen;
@@ -387,10 +389,10 @@ intel_blt_copy(struct intel_batchbuffer *batch,
dst_pitch);
OUT_BATCH((dst_y1 << 16) | dst_x1); /* dst x1,y1 */
OUT_BATCH(((dst_y1 + height) << 16) | (dst_x1 + width)); /* dst x2,y2 */
- OUT_RELOC_FENCED(dst_bo, I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER, 0);
+ OUT_RELOC_FENCED(dst_bo, I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER, dst_delta);
OUT_BATCH((src_y1 << 16) | src_x1); /* src x1,y1 */
OUT_BATCH(src_pitch);
- OUT_RELOC_FENCED(src_bo, I915_GEM_DOMAIN_RENDER, 0, 0);
+ OUT_RELOC_FENCED(src_bo, I915_GEM_DOMAIN_RENDER, 0, src_delta);
ADVANCE_BATCH();
#define CMD_POLY_STIPPLE_OFFSET 0x7906
@@ -431,8 +433,8 @@ intel_copy_bo(struct intel_batchbuffer *batch,
igt_assert(size % 4096 == 0);
intel_blt_copy(batch,
- src_bo, 0, 0, 4096,
- dst_bo, 0, 0, 4096,
+ src_bo, 0, 0, 0, 4096,
+ dst_bo, 0, 0, 0, 4096,
4096/4, size/4096, 32);
}
diff --git a/lib/intel_batchbuffer.h b/lib/intel_batchbuffer.h
index 2c262d7d7e79..8c8c7ee543dd 100644
--- a/lib/intel_batchbuffer.h
+++ b/lib/intel_batchbuffer.h
@@ -181,8 +181,8 @@ intel_batchbuffer_require_space(struct intel_batchbuffer *batch,
void
intel_blt_copy(struct intel_batchbuffer *batch,
- drm_intel_bo *src_bo, int src_x1, int src_y1, int src_pitch,
- drm_intel_bo *dst_bo, int dst_x1, int dst_y1, int dst_pitch,
+ drm_intel_bo *src_bo, uint32_t src_delta, int src_x1, int src_y1, int src_pitch,
+ drm_intel_bo *dst_bo, uint32_t dst_delta, int dst_x1, int dst_y1, int dst_pitch,
int width, int height, int bpp);
void intel_copy_bo(struct intel_batchbuffer *batch,
drm_intel_bo *dst_bo, drm_intel_bo *src_bo,
diff --git a/tests/gem_concurrent_all.c b/tests/gem_concurrent_all.c
index 201b491bc245..620f8c21083a 100644
--- a/tests/gem_concurrent_all.c
+++ b/tests/gem_concurrent_all.c
@@ -874,8 +874,8 @@ static void render_copy_bo(struct buffers *b, drm_intel_bo *dst, drm_intel_bo *s
static void blt_copy_bo(struct buffers *b, drm_intel_bo *dst, drm_intel_bo *src)
{
intel_blt_copy(b->batch,
- src, 0, 0, 4*b->width,
- dst, 0, 0, 4*b->width,
+ src, 0, 0, 0, 4*b->width,
+ dst, 0, 0, 0, 4*b->width,
b->width, b->height, 32);
}
diff --git a/tests/gem_read_read_speed.c b/tests/gem_read_read_speed.c
index 3dcf440c7f81..d879f1225440 100644
--- a/tests/gem_read_read_speed.c
+++ b/tests/gem_read_read_speed.c
@@ -83,8 +83,8 @@ static drm_intel_bo *bcs_copy_bo(drm_intel_bo *dst, drm_intel_bo *src)
drm_intel_bo_reference(bo);
intel_blt_copy(batch,
- src, 0, 0, 4*width,
- dst, 0, 0, 4*width,
+ src, 0, 0, 0, 4*width,
+ dst, 0, 0, 0, 4*width,
width, height, 32);
return bo;
diff --git a/tests/kms_render.c b/tests/kms_render.c
index 25a0c05b547c..255cf3de39cf 100644
--- a/tests/kms_render.c
+++ b/tests/kms_render.c
@@ -64,7 +64,7 @@ static void gpu_blit(struct igt_fb *dst_fb, struct igt_fb *src_fb)
{
drm_intel_bo *dst_bo;
drm_intel_bo *src_bo;
- int bpp;
+ int i;
static drm_intel_bufmgr *bufmgr;
struct intel_batchbuffer *batch;
uint32_t devid;
@@ -79,7 +79,7 @@ static void gpu_blit(struct igt_fb *dst_fb, struct igt_fb *src_fb)
igt_assert(dst_fb->drm_format == src_fb->drm_format);
igt_assert(src_fb->drm_format == DRM_FORMAT_RGB565 ||
igt_drm_format_to_bpp(src_fb->drm_format) != 16);
- bpp = igt_drm_format_to_bpp(src_fb->drm_format);
+
dst_bo = gem_handle_to_libdrm_bo(bufmgr, drm_fd, "destination",
dst_fb->gem_handle);
igt_assert(dst_bo);
@@ -87,10 +87,13 @@ static void gpu_blit(struct igt_fb *dst_fb, struct igt_fb *src_fb)
src_fb->gem_handle);
igt_assert(src_bo);
- intel_blt_copy(batch,
- src_bo, 0, 0, src_fb->width * bpp / 8,
- dst_bo, 0, 0, dst_fb->width * bpp / 8,
- src_fb->width, src_fb->height, bpp);
+ for (i = 0; i < src_fb->num_planes; i++) {
+ intel_blt_copy(batch,
+ src_bo, src_fb->offsets[i], 0, 0, src_fb->stride,
+ dst_bo, dst_fb->offsets[i], 0, 0, dst_fb->stride,
+ src_fb->plane_width[i], src_fb->plane_height[i],
+ src_fb->plane_bpp[i]);
+ }
intel_batchbuffer_flush(batch);
gem_quiescent_gpu(drm_fd);
--
2.15.1
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2018-01-23 12:56 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-23 12:56 [igt-dev] [PATCH i-g-t 0/8] lib/igt_fb: Add support for the NV12 format Maarten Lankhorst
2018-01-23 12:56 ` [igt-dev] [PATCH i-g-t 1/8] lib/igt_fb: Add igt_put_cairo_ctx as counter to igt_get_cairo_ctx Maarten Lankhorst
2018-01-23 15:50 ` Ville Syrjälä
2018-01-24 12:26 ` Maarten Lankhorst
2018-01-25 11:43 ` Mika Kahola
2018-01-29 17:01 ` Maarten Lankhorst
2018-01-31 17:03 ` Ville Syrjälä
2018-01-23 12:56 ` [igt-dev] [PATCH i-g-t 2/8] lib/igt_fb: Pass format to igt_calc_fb_size Maarten Lankhorst
2018-01-25 11:51 ` Mika Kahola
2018-01-23 12:56 ` [igt-dev] [PATCH i-g-t 3/8] lib/fb: Handle planar formats in igt_calc_fb_size and create_bo_for_fb Maarten Lankhorst
2018-01-26 9:00 ` Mika Kahola
2018-01-26 10:20 ` Maarten Lankhorst
2018-01-26 10:24 ` Mika Kahola
2018-01-26 12:01 ` Maarten Lankhorst
2018-01-26 13:10 ` Mika Kahola
2018-02-01 14:39 ` Ville Syrjälä
2018-01-23 12:56 ` [igt-dev] [PATCH i-g-t 4/8] lib/intel_batchbuffer: Add delta argument to igt_blitter_fast_copy__raw Maarten Lankhorst
2018-01-26 9:02 ` Mika Kahola
2018-01-29 12:10 ` [igt-dev] [PATCH i-g-t] lib/intel_batchbuffer: Add delta argument to igt_blitter_fast_copy__raw, v2 Maarten Lankhorst
2018-01-23 12:56 ` [igt-dev] [PATCH i-g-t 5/8] lib/intel_batchbuffer: Add src/dst delta arguments to igt_blitter_fast_copy too Maarten Lankhorst
2018-01-26 9:04 ` Mika Kahola
2018-01-23 12:56 ` [igt-dev] [PATCH i-g-t 6/8] lib/fb: Add support for creating planar framebuffers Maarten Lankhorst
2018-01-23 14:50 ` [igt-dev] [PATCH i-g-t] lib/fb: Add support for creating planar framebuffers, v2 Maarten Lankhorst
2018-01-24 10:53 ` [igt-dev] [PATCH i-g-t] lib/fb: Add support for creating planar framebuffers, v3 Maarten Lankhorst
2018-01-29 8:44 ` Mika Kahola
2018-01-23 12:56 ` Maarten Lankhorst [this message]
2018-01-26 13:56 ` [igt-dev] [PATCH i-g-t 7/8] tests/kms_render: Copy all planes when copying fb Mika Kahola
2018-02-28 15:40 ` Arkadiusz Hiler
2018-02-28 15:43 ` Maarten Lankhorst
2018-02-28 15:43 ` Arkadiusz Hiler
2018-01-23 12:56 ` [igt-dev] [PATCH i-g-t 8/8] lib/igt_fb: Add support for NV12 format through conversion Maarten Lankhorst
2018-01-31 13:45 ` Mika Kahola
2018-01-31 14:32 ` Ville Syrjälä
2018-01-31 15:09 ` Maarten Lankhorst
2018-01-31 16:52 ` [igt-dev] [PATCH i-g-t] lib/igt_fb: Add support for NV12 format through conversion, v2 Maarten Lankhorst
2018-02-01 14:23 ` Ville Syrjälä
2018-02-01 14:43 ` Maarten Lankhorst
2018-01-23 14:28 ` [igt-dev] ✗ Fi.CI.BAT: failure for lib/igt_fb: Add support for the NV12 format Patchwork
2018-01-23 15:41 ` [igt-dev] ✓ Fi.CI.BAT: success for lib/igt_fb: Add support for the NV12 format. (rev2) Patchwork
2018-01-23 19:47 ` [igt-dev] ✗ Fi.CI.IGT: failure for lib/igt_fb: Add support for the NV12 format Patchwork
2018-01-23 22:30 ` [igt-dev] ✗ Fi.CI.IGT: failure for lib/igt_fb: Add support for the NV12 format. (rev2) Patchwork
2018-01-24 12:16 ` [igt-dev] ✓ Fi.CI.BAT: success for lib/igt_fb: Add support for the NV12 format. (rev3) Patchwork
2018-01-24 15:57 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
2018-01-29 12:37 ` [igt-dev] ✓ Fi.CI.BAT: success for lib/igt_fb: Add support for the NV12 format. (rev4) Patchwork
2018-01-29 17:29 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
2018-01-31 17:15 ` [igt-dev] ✓ Fi.CI.BAT: success for lib/igt_fb: Add support for the NV12 format. (rev5) Patchwork
2018-01-31 18:55 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180123125642.58698-8-maarten.lankhorst@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox