From: Tvrtko Ursulin <tursulin@ursulin.net>
To: igt-dev@lists.freedesktop.org
Cc: Intel-gfx@lists.freedesktop.org,
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Subject: [igt-dev] [PATCH i-g-t 04/11] scripts/trace.pl: Calculate stats only after all munging
Date: Tue, 6 Mar 2018 12:43:08 +0000 [thread overview]
Message-ID: <20180306124315.30208-5-tvrtko.ursulin@linux.intel.com> (raw)
In-Reply-To: <20180306124315.30208-1-tvrtko.ursulin@linux.intel.com>
From: John Harrison <John.C.Harrison@Intel.com>
There are various statistics being calculated multiple times in
multiple places while the log file is being read in. Some of these are
then re-calculated when the database is munged to correct various
issues with the logs. This patch consolidates the calculations into a
separate pass after all the reading and munging has been done.
Note that this actually produces a different final output as the
'execute-delay' values were not previously being re-calculated after
all the fixups. Thus were based on an incorrect calculation.
v2: Reduce scope of some local variables [Tvrtko]
Signed-off-by: John Harrison <John.C.Harrison@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
scripts/trace.pl | 54 ++++++++++++++++++++++++++++--------------------------
1 file changed, 28 insertions(+), 26 deletions(-)
diff --git a/scripts/trace.pl b/scripts/trace.pl
index d571a870fca2..d880a733bff8 100755
--- a/scripts/trace.pl
+++ b/scripts/trace.pl
@@ -437,8 +437,7 @@ while (<>) {
$req{'global'} = $tp{'global'};
$req{'port'} = $tp{'port'};
$req{'queue'} = $queue{$key};
- $req{'submit-delay'} = $submit{$key} - $queue{$key};
- $req{'execute-delay'} = $req{'start'} - $submit{$key};
+ $req{'submit'} = $submit{$key};
$rings{$ring} = $gid++ unless exists $rings{$ring};
$ringmap{$rings{$ring}} = $ring;
$db{$key} = \%req;
@@ -458,8 +457,6 @@ while (<>) {
$db{$key}->{'notify'} = $db{$key}->{'end'};
$db{$key}->{'no-notify'} = 1;
}
- $db{$key}->{'duration'} = $db{$key}->{'notify'} - $db{$key}->{'start'};
- $db{$key}->{'context-complete-delay'} = $db{$key}->{'end'} - $db{$key}->{'notify'};
} elsif ($tp_name eq 'i915:intel_engine_notify:') {
$notify{global_key($ring, $seqno)} = $time;
} elsif ($tp_name eq 'i915:intel_gpu_freq_change:') {
@@ -493,16 +490,11 @@ foreach my $key (keys %db) {
$db{$key}->{'notify'} = $db{$key}->{'end'};
$db{$key}->{'incomplete'} = 1;
}
-
- $db{$key}->{'duration'} = $db{$key}->{'notify'} - $db{$key}->{'start'};
- $db{$key}->{'context-complete-delay'} = $db{$key}->{'end'} - $db{$key}->{'notify'};
} else {
# Notify arrived after context complete.
if (exists $db{$key}->{'no-notify'} and exists $notify{$gkey}) {
delete $db{$key}->{'no-notify'};
$db{$key}->{'notify'} = $notify{$gkey};
- $db{$key}->{'duration'} = $db{$key}->{'notify'} - $db{$key}->{'start'};
- $db{$key}->{'context-complete-delay'} = $db{$key}->{'end'} - $db{$key}->{'notify'};
}
}
}
@@ -528,8 +520,6 @@ foreach my $key (keys %db) {
if (exists $db{$next_key}) {
$db{$key}->{'notify'} = $db{$next_key}->{'end'};
$db{$key}->{'end'} = $db{$key}->{'notify'};
- $db{$key}->{'duration'} = $db{$key}->{'notify'} - $db{$key}->{'start'};
- $db{$key}->{'context-complete-delay'} = $db{$key}->{'end'} - $db{$key}->{'notify'};
}
}
@@ -573,17 +563,11 @@ foreach my $key (@sorted_keys) {
$first_ts = $db{$key}->{'queue'} if not defined $first_ts or $db{$key}->{'queue'} < $first_ts;
$last_ts = $end if $end > $last_ts;
- $running{$ring} += $end - $db{$key}->{'start'} unless exists $db{$key}->{'no-end'};
- $runnable{$ring} += $db{$key}->{'execute-delay'};
- $queued{$ring} += $db{$key}->{'start'} - $db{$key}->{'execute-delay'} - $db{$key}->{'queue'};
-
- $batch_count{$ring}++;
-
# correct duration of merged batches
if ($correct_durations and exists $db{$key}->{'no-end'}) {
- my $start = $db{$key}->{'start'};
my $ctx = $db{$key}->{'ctx'};
my $seqno = $db{$key}->{'seqno'};
+ my $start = $db{$key}->{'start'};
my $next_key;
my $i = 1;
@@ -594,25 +578,43 @@ foreach my $key (@sorted_keys) {
# 20us tolerance
if (exists $db{$next_key} and $db{$next_key}->{'start'} < $start + 20) {
+ my $notify = $db{$key}->{'notify'};
$re_sort = 1;
- $db{$next_key}->{'start'} = $start + $db{$key}->{'duration'};
+ $db{$next_key}->{'start'} = $notify;
$db{$next_key}->{'start'} = $db{$next_key}->{'end'} if $db{$next_key}->{'start'} > $db{$next_key}->{'end'};
- $db{$next_key}->{'duration'} = $db{$next_key}->{'notify'} - $db{$next_key}->{'start'};
- $end = $db{$key}->{'notify'};
die if $db{$next_key}->{'start'} > $db{$next_key}->{'end'};
}
- die if $db{$key}->{'start'} > $db{$key}->{'end'};
+ die if $start > $end;
}
+}
+
+@sorted_keys = sort sortStart keys %db if $re_sort;
+
+foreach my $key (@sorted_keys) {
+ my $ring = $db{$key}->{'ring'};
+ my $end = $db{$key}->{'end'};
+ my $start = $db{$key}->{'start'};
+ my $notify = $db{$key}->{'notify'};
+
+ $db{$key}->{'context-complete-delay'} = $end - $notify;
+ $db{$key}->{'execute-delay'} = $start - $db{$key}->{'submit'};
+ $db{$key}->{'submit-delay'} = $db{$key}->{'submit'} - $db{$key}->{'queue'};
+ $db{$key}->{'duration'} = $notify - $start;
+
+ $running{$ring} += $end - $start unless exists $db{$key}->{'no-end'};
+ $runnable{$ring} += $db{$key}->{'execute-delay'};
+ $queued{$ring} += $start - $db{$key}->{'execute-delay'} - $db{$key}->{'queue'};
+
+ $batch_count{$ring}++;
+
$batch_avg{$ring} += $db{$key}->{'duration'};
- $batch_total_avg{$ring} += $end - $db{$key}->{'start'};
+ $batch_total_avg{$ring} += $end - $start;
$submit_avg{$ring} += $db{$key}->{'submit-delay'};
$execute_avg{$ring} += $db{$key}->{'execute-delay'};
- $ctxsave_avg{$ring} += $db{$key}->{'end'} - $db{$key}->{'notify'};
+ $ctxsave_avg{$ring} += $end - $notify;
}
-@sorted_keys = sort sortStart keys %db if $re_sort;
-
foreach my $ring (sort keys %batch_avg) {
$batch_avg{$ring} /= $batch_count{$ring};
$batch_total_avg{$ring} /= $batch_count{$ring};
--
2.14.1
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2018-03-06 12:43 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-06 12:43 [Intel-gfx] [PATCH i-g-t v2 00/11] trace.pl fixes Tvrtko Ursulin
2018-03-06 12:43 ` [Intel-gfx] [PATCH i-g-t 01/11] trace.pl: Catch-up with tracepoint renames Tvrtko Ursulin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 02/11] scripts/trace.pl: More hash key optimisations Tvrtko Ursulin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 03/11] scripts/trace.pl: Sort order Tvrtko Ursulin
2018-03-06 12:43 ` Tvrtko Ursulin [this message]
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 05/11] scripts/trace.pl: Simplify 'end' & 'notify' generation Tvrtko Ursulin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 06/11] trace.pl: Move sortQueue near its user Tvrtko Ursulin
2018-04-18 16:56 ` [Intel-gfx] " Lionel Landwerlin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 07/11] trace.pl: Move min/max timestamp lookup to last loop Tvrtko Ursulin
2018-04-18 16:56 ` Lionel Landwerlin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 08/11] trace.pl: Fix engine busy accounting in split mode Tvrtko Ursulin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 09/11] trace.pl: Add support for colouring context execution Tvrtko Ursulin
2018-04-18 17:02 ` [igt-dev] [Intel-gfx] " Lionel Landwerlin
2018-03-06 12:43 ` [Intel-gfx] [PATCH i-g-t 10/11] trace.pl: Fix incomplete request handling Tvrtko Ursulin
2018-03-06 12:43 ` [igt-dev] [PATCH i-g-t 11/11] trace.pl: Fix request split mode Tvrtko Ursulin
2018-03-06 14:18 ` [igt-dev] ✓ Fi.CI.BAT: success for trace.pl fixes (rev2) Patchwork
2018-03-06 19:29 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2018-04-18 14:52 ` [igt-dev] [PATCH i-g-t v2 00/11] trace.pl fixes Tvrtko Ursulin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180306124315.30208-5-tvrtko.ursulin@linux.intel.com \
--to=tursulin@ursulin.net \
--cc=Intel-gfx@lists.freedesktop.org \
--cc=igt-dev@lists.freedesktop.org \
--cc=tvrtko.ursulin@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox