From: Maxime Ripard <maxime.ripard@bootlin.com>
To: igt-dev@lists.freedesktop.org
Cc: Petri Latvala <petri.latvala@intel.com>,
eben@raspberrypi.org,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [igt-dev] [PATCH i-g-t v2 12/13] igt: tests: chamelium: Convert VGA tests to do_test_display
Date: Tue, 8 Jan 2019 16:19:58 +0100 [thread overview]
Message-ID: <20190108152001.5367-12-maxime.ripard@bootlin.com> (raw)
In-Reply-To: <cover.58d25323616120b55c27ab28cdac25877a37bd78.1546960696.git-series.maxime.ripard@bootlin.com>
The VGA tests were run so far as part of a separate function. However,
the only difference between that function and the do_test_display
function was the kind of comparison we wanted to use. Indeed, VGA
being an analog output, we can't rely on a pixel perfect image, and
thus only compare the CRCs, but we need to make some more advanced
comparison.
Let's add a new check method, add support for the analog check to
do_test_display and remove the old version.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
tests/kms_chamelium.c | 92 ++++++++++++++++---------------------------
1 file changed, 33 insertions(+), 59 deletions(-)
diff --git a/tests/kms_chamelium.c b/tests/kms_chamelium.c
index 8230cb852cfb..eaea9c18832a 100644
--- a/tests/kms_chamelium.c
+++ b/tests/kms_chamelium.c
@@ -528,6 +528,7 @@ static int chamelium_get_pattern_fb(data_t *data, size_t width, size_t height,
}
enum chamelium_check {
+ CHAMELIUM_CHECK_ANALOG,
CHAMELIUM_CHECK_CRC,
};
@@ -579,6 +580,18 @@ static void do_test_display(data_t *data, struct chamelium_port *port,
free(expected_crc);
free(crc);
+ } else if (check == CHAMELIUM_CHECK_ANALOG) {
+ struct chamelium_frame_dump *dump;
+
+ igt_assert(count == 1);
+
+ dump = chamelium_port_dump_pixels(data->chamelium, port, 0, 0,
+ 0, 0);
+ chamelium_crop_analog_frame(dump, mode->hdisplay,
+ mode->vdisplay);
+ chamelium_assert_analog_frame_match_or_dump(data->chamelium,
+ port, dump, &fb);
+ chamelium_destroy_frame_dump(dump);
}
igt_remove_fb(data->drm_fd, &frame_fb);
@@ -589,8 +602,9 @@ static void test_display_one_mode(data_t *data, struct chamelium_port *port,
uint32_t fourcc, enum chamelium_check check,
int count)
{
- igt_output_t *output;
drmModeConnector *connector;
+ drmModeModeInfo *mode;
+ igt_output_t *output;
igt_plane_t *primary;
reset_state(data, port);
@@ -600,8 +614,14 @@ static void test_display_one_mode(data_t *data, struct chamelium_port *port,
primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
igt_assert(primary);
- do_test_display(data, port, output, &connector->modes[0], fourcc,
- check, count);
+ mode = &connector->modes[0];
+ if (check == CHAMELIUM_CHECK_ANALOG) {
+ bool bridge = check_analog_bridge(data, port);
+
+ igt_assert(!(bridge && prune_vga_mode(data, mode)));
+ }
+
+ do_test_display(data, port, output, mode, fourcc, check, count);
drmModeFreeConnector(connector);
}
@@ -613,6 +633,7 @@ static void test_display_all_modes(data_t *data, struct chamelium_port *port,
igt_output_t *output;
igt_plane_t *primary;
drmModeConnector *connector;
+ bool bridge;
int i;
reset_state(data, port);
@@ -622,9 +643,16 @@ static void test_display_all_modes(data_t *data, struct chamelium_port *port,
primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
igt_assert(primary);
+ if (check == CHAMELIUM_CHECK_ANALOG)
+ bridge = check_analog_bridge(data, port);
+
for (i = 0; i < connector->count_modes; i++) {
drmModeModeInfo *mode = &connector->modes[i];
+ if (check == CHAMELIUM_CHECK_ANALOG && bridge &&
+ prune_vga_mode(data, mode))
+ continue;
+
do_test_display(data, port, output, mode, fourcc, check, count);
}
@@ -675,61 +703,6 @@ test_display_frame_dump(data_t *data, struct chamelium_port *port)
drmModeFreeConnector(connector);
}
-static void
-test_analog_frame_dump(data_t *data, struct chamelium_port *port)
-{
- igt_output_t *output;
- igt_plane_t *primary;
- struct igt_fb fb;
- struct chamelium_frame_dump *frame;
- drmModeModeInfo *mode;
- drmModeConnector *connector;
- int fb_id, i;
- bool bridge;
-
- reset_state(data, port);
-
- output = prepare_output(data, port);
- connector = chamelium_port_get_connector(data->chamelium, port, false);
- primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
- igt_assert(primary);
-
- bridge = check_analog_bridge(data, port);
-
- for (i = 0; i < connector->count_modes; i++) {
- mode = &connector->modes[i];
-
- if (bridge && prune_vga_mode(data, mode))
- continue;
-
- fb_id = igt_create_color_pattern_fb(data->drm_fd,
- mode->hdisplay, mode->vdisplay,
- DRM_FORMAT_XRGB8888,
- LOCAL_DRM_FORMAT_MOD_NONE,
- 0, 0, 0, &fb);
- igt_assert(fb_id > 0);
-
- enable_output(data, port, output, mode, &fb);
-
- igt_debug("Reading frame dumps from Chamelium...\n");
-
- frame = chamelium_port_dump_pixels(data->chamelium, port, 0, 0,
- 0, 0);
-
- chamelium_crop_analog_frame(frame, mode->hdisplay,
- mode->vdisplay);
-
- chamelium_assert_analog_frame_match_or_dump(data->chamelium,
- port, frame, &fb);
-
- chamelium_destroy_frame_dump(frame);
-
- igt_remove_fb(data->drm_fd, &fb);
- }
-
- drmModeFreeConnector(connector);
-}
-
static void
test_hpd_without_ddc(data_t *data, struct chamelium_port *port)
{
@@ -1041,7 +1014,8 @@ igt_main
test_hpd_without_ddc(&data, port);
connector_subtest("vga-frame-dump", VGA)
- test_analog_frame_dump(&data, port);
+ test_display_all_modes(&data, port, DRM_FORMAT_XRGB8888,
+ CHAMELIUM_CHECK_ANALOG, 1);
}
igt_subtest_group {
--
2.20.1
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2019-01-08 15:20 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-08 15:19 [igt-dev] [PATCH i-g-t v2 00/13] igt: chamelium: Test YUV buffers using the Chamelium Maxime Ripard
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 01/13] igt: fb: Add subsampling parameters to the formats Maxime Ripard
2019-01-10 9:59 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 02/13] igt: fb: Reduce tile size alignment for non intel platforms Maxime Ripard
2019-01-10 9:59 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 03/13] igt: fb: generic YUV convertion function Maxime Ripard
2019-01-10 10:07 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 04/13] igt: fb: Move i915 YUV buffer clearing code to a function Maxime Ripard
2019-01-10 10:10 ` Paul Kocialkowski
2019-01-10 14:38 ` Ville Syrjälä
2019-01-14 15:13 ` Paul Kocialkowski
2019-01-14 16:40 ` Ville Syrjälä
2019-01-15 16:15 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 05/13] igt: fb: Move size computation to the common path Maxime Ripard
2019-01-10 10:10 ` Paul Kocialkowski
2019-01-10 10:43 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 06/13] igt: fb: Refactor dumb buffer allocation path Maxime Ripard
2019-01-10 10:11 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 07/13] igt: fb: Account for all planes bpp Maxime Ripard
2019-01-10 10:21 ` Paul Kocialkowski
2019-01-21 13:10 ` Maxime Ripard
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 08/13] igt: fb: Clear YUV dumb buffers Maxime Ripard
2019-01-10 10:27 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 09/13] igt: fb: Rework YUV i915 allocation path Maxime Ripard
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 10/13] igt: fb: Add a bunch of new YUV formats Maxime Ripard
2019-01-10 10:45 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 11/13] igt: tests: chamelium: Start to unify tests Maxime Ripard
2019-01-10 10:50 ` Paul Kocialkowski
2019-01-21 13:17 ` Maxime Ripard
2019-01-08 15:19 ` Maxime Ripard [this message]
2019-01-10 10:50 ` [igt-dev] [PATCH i-g-t v2 12/13] igt: tests: chamelium: Convert VGA tests to do_test_display Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 13/13] igt: tests: chamelium: Add YUV formats tests Maxime Ripard
2019-01-10 10:54 ` Paul Kocialkowski
2019-01-08 15:31 ` [igt-dev] ✗ Fi.CI.BAT: failure for igt: chamelium: Test YUV buffers using the Chamelium (rev3) Patchwork
2019-01-08 17:59 ` [igt-dev] ✓ Fi.CI.BAT: success for igt: chamelium: Test YUV buffers using the Chamelium (rev4) Patchwork
2019-01-09 3:11 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190108152001.5367-12-maxime.ripard@bootlin.com \
--to=maxime.ripard@bootlin.com \
--cc=eben@raspberrypi.org \
--cc=igt-dev@lists.freedesktop.org \
--cc=petri.latvala@intel.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox