From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>, igt-dev@lists.freedesktop.org
Cc: Petri Latvala <petri.latvala@intel.com>,
eben@raspberrypi.org,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: Re: [igt-dev] [PATCH i-g-t v2 11/13] igt: tests: chamelium: Start to unify tests
Date: Thu, 10 Jan 2019 11:50:35 +0100 [thread overview]
Message-ID: <36b5c40afa92dd135d046d150d890f28f252c1f0.camel@bootlin.com> (raw)
In-Reply-To: <20190108152001.5367-11-maxime.ripard@bootlin.com>
Hi,
On Tue, 2019-01-08 at 16:19 +0100, Maxime Ripard wrote:
> The various tests in kms_chamelium are really variants of one another
> but share little code.
>
> In addition to the duplication, this gets in the way of the
> introduction of more tests, or to be able to run all the tests on all
> the output, which isn't the case at the moment, with the HDMI and DP
> tests and the VGA tests being different.
>
> Start by introducing a check parameter to the do_test_display
> function, that will tell which test method we want to use to compare
> the frames.
I think we can go even further and unify the assert_foo_or_dump
functions, which would imply moving enum chamelium_check to
igt_chamelium. It's probably best to do it in a separate patch though
and I might have a go at it in the next revision of my plane testing
series.
What do you think?
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> ---
> tests/kms_chamelium.c | 134 +++++++++++++++++++++++-------------------
> 1 file changed, 73 insertions(+), 61 deletions(-)
>
> diff --git a/tests/kms_chamelium.c b/tests/kms_chamelium.c
> index 2d848c2f0620..8230cb852cfb 100644
> --- a/tests/kms_chamelium.c
> +++ b/tests/kms_chamelium.c
> @@ -527,12 +527,15 @@ static int chamelium_get_pattern_fb(data_t *data, size_t width, size_t height,
> return fb_id;
> }
>
> -static void do_test_display_crc(data_t *data, struct chamelium_port *port,
> - igt_output_t *output, drmModeModeInfo *mode,
> - uint32_t fourcc, int count)
> +enum chamelium_check {
> + CHAMELIUM_CHECK_CRC,
> +};
> +
> +static void do_test_display(data_t *data, struct chamelium_port *port,
> + igt_output_t *output, drmModeModeInfo *mode,
> + uint32_t fourcc, enum chamelium_check check,
> + int count)
> {
> - igt_crc_t *crc;
> - igt_crc_t *expected_crc;
> struct chamelium_fb_crc_async_data *fb_crc;
> struct igt_fb frame_fb, fb;
> int i, fb_id, captured_frame_count;
> @@ -545,39 +548,46 @@ static void do_test_display_crc(data_t *data, struct chamelium_port *port,
> frame_id = igt_fb_convert(&frame_fb, &fb, fourcc);
> igt_assert(frame_id > 0);
>
> - fb_crc = chamelium_calculate_fb_crc_async_start(data->drm_fd,
> - &fb);
> + if (check == CHAMELIUM_CHECK_CRC)
> + fb_crc = chamelium_calculate_fb_crc_async_start(data->drm_fd,
> + &fb);
>
> enable_output(data, port, output, mode, &frame_fb);
>
> - /* We want to keep the display running for a little bit, since
> - * there's always the potential the driver isn't able to keep
> - * the display running properly for very long
> - */
> - chamelium_capture(data->chamelium, port, 0, 0, 0, 0, count);
> - crc = chamelium_read_captured_crcs(data->chamelium,
> - &captured_frame_count);
> + if (check == CHAMELIUM_CHECK_CRC) {
> + igt_crc_t *expected_crc;
> + igt_crc_t *crc;
>
> - igt_assert(captured_frame_count == count);
> + /* We want to keep the display running for a little bit, since
> + * there's always the potential the driver isn't able to keep
> + * the display running properly for very long
> + */
> + chamelium_capture(data->chamelium, port, 0, 0, 0, 0, count);
> + crc = chamelium_read_captured_crcs(data->chamelium,
> + &captured_frame_count);
>
> - igt_debug("Captured %d frames\n", captured_frame_count);
> + igt_assert(captured_frame_count == count);
>
> - expected_crc = chamelium_calculate_fb_crc_async_finish(fb_crc);
> + igt_debug("Captured %d frames\n", captured_frame_count);
>
> - for (i = 0; i < captured_frame_count; i++)
> - chamelium_assert_crc_eq_or_dump(data->chamelium,
> - expected_crc, &crc[i],
> - &fb, i);
> + expected_crc = chamelium_calculate_fb_crc_async_finish(fb_crc);
>
> - free(expected_crc);
> - free(crc);
> + for (i = 0; i < captured_frame_count; i++)
> + chamelium_assert_crc_eq_or_dump(data->chamelium,
> + expected_crc, &crc[i],
> + &fb, i);
> +
> + free(expected_crc);
> + free(crc);
> + }
>
> igt_remove_fb(data->drm_fd, &frame_fb);
> igt_remove_fb(data->drm_fd, &fb);
> }
>
> -static void test_display_crc_one_mode(data_t *data, struct chamelium_port *port,
> - uint32_t fourcc, int count)
> +static void test_display_one_mode(data_t *data, struct chamelium_port *port,
> + uint32_t fourcc, enum chamelium_check check,
> + int count)
> {
> igt_output_t *output;
> drmModeConnector *connector;
> @@ -590,13 +600,15 @@ static void test_display_crc_one_mode(data_t *data, struct chamelium_port *port,
> primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> igt_assert(primary);
>
> - do_test_display_crc(data, port, output, &connector->modes[0], fourcc, count);
> + do_test_display(data, port, output, &connector->modes[0], fourcc,
> + check, count);
>
> drmModeFreeConnector(connector);
> }
>
> -static void test_display_crc_all_modes(data_t *data, struct chamelium_port *port,
> - uint32_t fourcc, int count)
> +static void test_display_all_modes(data_t *data, struct chamelium_port *port,
> + uint32_t fourcc, enum chamelium_check check,
> + int count)
> {
> igt_output_t *output;
> igt_plane_t *primary;
> @@ -613,7 +625,7 @@ static void test_display_crc_all_modes(data_t *data, struct chamelium_port *port
> for (i = 0; i < connector->count_modes; i++) {
> drmModeModeInfo *mode = &connector->modes[i];
>
> - do_test_display_crc(data, port, output, mode, fourcc, count);
> + do_test_display(data, port, output, mode, fourcc, check, count);
> }
>
> drmModeFreeConnector(connector);
> @@ -874,16 +886,16 @@ igt_main
> edid_id, alt_edid_id);
>
> connector_subtest("dp-crc-single", DisplayPort)
> - test_display_crc_all_modes(&data, port,
> - DRM_FORMAT_XRGB8888, 1);
> + test_display_all_modes(&data, port, DRM_FORMAT_XRGB8888,
> + CHAMELIUM_CHECK_CRC, 1);
>
> connector_subtest("dp-crc-fast", DisplayPort)
> - test_display_crc_one_mode(&data, port,
> - DRM_FORMAT_XRGB8888, 1);
> + test_display_one_mode(&data, port, DRM_FORMAT_XRGB8888,
> + CHAMELIUM_CHECK_CRC, 1);
>
> connector_subtest("dp-crc-multiple", DisplayPort)
> - test_display_crc_all_modes(&data, port,
> - DRM_FORMAT_XRGB8888, 3);
> + test_display_all_modes(&data, port, DRM_FORMAT_XRGB8888,
> + CHAMELIUM_CHECK_CRC, 3);
>
> connector_subtest("dp-frame-dump", DisplayPort)
> test_display_frame_dump(&data, port);
> @@ -941,56 +953,56 @@ igt_main
> edid_id, alt_edid_id);
>
> connector_subtest("hdmi-crc-single", HDMIA)
> - test_display_crc_all_modes(&data, port,
> - DRM_FORMAT_XRGB8888, 1);
> + test_display_all_modes(&data, port, DRM_FORMAT_XRGB8888,
> + CHAMELIUM_CHECK_CRC, 1);
>
> connector_subtest("hdmi-crc-fast", HDMIA)
> - test_display_crc_one_mode(&data, port,
> - DRM_FORMAT_XRGB8888, 1);
> + test_display_one_mode(&data, port, DRM_FORMAT_XRGB8888,
> + CHAMELIUM_CHECK_CRC, 1);
>
> connector_subtest("hdmi-crc-multiple", HDMIA)
> - test_display_crc_all_modes(&data, port,
> - DRM_FORMAT_XRGB8888, 3);
> + test_display_all_modes(&data, port, DRM_FORMAT_XRGB8888,
> + CHAMELIUM_CHECK_CRC, 3);
>
> connector_subtest("hdmi-crc-argb8888", HDMIA)
> - test_display_crc_one_mode(&data, port,
> - DRM_FORMAT_ARGB8888, 1);
> + test_display_one_mode(&data, port, DRM_FORMAT_ARGB8888,
> + CHAMELIUM_CHECK_CRC, 1);
>
> connector_subtest("hdmi-crc-abgr8888", HDMIA)
> - test_display_crc_one_mode(&data, port,
> - DRM_FORMAT_ABGR8888, 1);
> + test_display_one_mode(&data, port, DRM_FORMAT_ABGR8888,
> + CHAMELIUM_CHECK_CRC, 1);
>
> connector_subtest("hdmi-crc-xrgb8888", HDMIA)
> - test_display_crc_one_mode(&data, port,
> - DRM_FORMAT_XRGB8888, 1);
> + test_display_one_mode(&data, port, DRM_FORMAT_XRGB8888,
> + CHAMELIUM_CHECK_CRC, 1);
>
> connector_subtest("hdmi-crc-xbgr8888", HDMIA)
> - test_display_crc_one_mode(&data, port,
> - DRM_FORMAT_XBGR8888, 1);
> + test_display_one_mode(&data, port, DRM_FORMAT_XBGR8888,
> + CHAMELIUM_CHECK_CRC, 1);
>
> connector_subtest("hdmi-crc-rgb888", HDMIA)
> - test_display_crc_one_mode(&data, port,
> - DRM_FORMAT_RGB888, 1);
> + test_display_one_mode(&data, port, DRM_FORMAT_RGB888,
> + CHAMELIUM_CHECK_CRC, 1);
>
> connector_subtest("hdmi-crc-bgr888", HDMIA)
> - test_display_crc_one_mode(&data, port,
> - DRM_FORMAT_BGR888, 1);
> + test_display_one_mode(&data, port, DRM_FORMAT_BGR888,
> + CHAMELIUM_CHECK_CRC, 1);
>
> connector_subtest("hdmi-crc-rgb565", HDMIA)
> - test_display_crc_one_mode(&data, port,
> - DRM_FORMAT_RGB565, 1);
> + test_display_one_mode(&data, port, DRM_FORMAT_RGB565,
> + CHAMELIUM_CHECK_CRC, 1);
>
> connector_subtest("hdmi-crc-bgr565", HDMIA)
> - test_display_crc_one_mode(&data, port,
> - DRM_FORMAT_BGR565, 1);
> + test_display_one_mode(&data, port, DRM_FORMAT_BGR565,
> + CHAMELIUM_CHECK_CRC, 1);
>
> connector_subtest("hdmi-crc-argb1555", HDMIA)
> - test_display_crc_one_mode(&data, port,
> - DRM_FORMAT_ARGB1555, 1);
> + test_display_one_mode(&data, port, DRM_FORMAT_ARGB1555,
> + CHAMELIUM_CHECK_CRC, 1);
>
> connector_subtest("hdmi-crc-xrgb1555", HDMIA)
> - test_display_crc_one_mode(&data, port,
> - DRM_FORMAT_XRGB1555, 1);
> + test_display_one_mode(&data, port, DRM_FORMAT_XRGB1555,
> + CHAMELIUM_CHECK_CRC, 1);
>
> connector_subtest("hdmi-frame-dump", HDMIA)
> test_display_frame_dump(&data, port);
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2019-01-10 10:50 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-08 15:19 [igt-dev] [PATCH i-g-t v2 00/13] igt: chamelium: Test YUV buffers using the Chamelium Maxime Ripard
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 01/13] igt: fb: Add subsampling parameters to the formats Maxime Ripard
2019-01-10 9:59 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 02/13] igt: fb: Reduce tile size alignment for non intel platforms Maxime Ripard
2019-01-10 9:59 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 03/13] igt: fb: generic YUV convertion function Maxime Ripard
2019-01-10 10:07 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 04/13] igt: fb: Move i915 YUV buffer clearing code to a function Maxime Ripard
2019-01-10 10:10 ` Paul Kocialkowski
2019-01-10 14:38 ` Ville Syrjälä
2019-01-14 15:13 ` Paul Kocialkowski
2019-01-14 16:40 ` Ville Syrjälä
2019-01-15 16:15 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 05/13] igt: fb: Move size computation to the common path Maxime Ripard
2019-01-10 10:10 ` Paul Kocialkowski
2019-01-10 10:43 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 06/13] igt: fb: Refactor dumb buffer allocation path Maxime Ripard
2019-01-10 10:11 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 07/13] igt: fb: Account for all planes bpp Maxime Ripard
2019-01-10 10:21 ` Paul Kocialkowski
2019-01-21 13:10 ` Maxime Ripard
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 08/13] igt: fb: Clear YUV dumb buffers Maxime Ripard
2019-01-10 10:27 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 09/13] igt: fb: Rework YUV i915 allocation path Maxime Ripard
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 10/13] igt: fb: Add a bunch of new YUV formats Maxime Ripard
2019-01-10 10:45 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 11/13] igt: tests: chamelium: Start to unify tests Maxime Ripard
2019-01-10 10:50 ` Paul Kocialkowski [this message]
2019-01-21 13:17 ` Maxime Ripard
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 12/13] igt: tests: chamelium: Convert VGA tests to do_test_display Maxime Ripard
2019-01-10 10:50 ` Paul Kocialkowski
2019-01-08 15:19 ` [igt-dev] [PATCH i-g-t v2 13/13] igt: tests: chamelium: Add YUV formats tests Maxime Ripard
2019-01-10 10:54 ` Paul Kocialkowski
2019-01-08 15:31 ` [igt-dev] ✗ Fi.CI.BAT: failure for igt: chamelium: Test YUV buffers using the Chamelium (rev3) Patchwork
2019-01-08 17:59 ` [igt-dev] ✓ Fi.CI.BAT: success for igt: chamelium: Test YUV buffers using the Chamelium (rev4) Patchwork
2019-01-09 3:11 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=36b5c40afa92dd135d046d150d890f28f252c1f0.camel@bootlin.com \
--to=paul.kocialkowski@bootlin.com \
--cc=eben@raspberrypi.org \
--cc=igt-dev@lists.freedesktop.org \
--cc=maxime.ripard@bootlin.com \
--cc=petri.latvala@intel.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox