public inbox for igt-dev@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: igt-dev@lists.freedesktop.org
Cc: Petri Latvala <petri.latvala@intel.com>,
	eben@raspberrypi.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [igt-dev] [PATCH i-g-t v3 13/14] igt: tests: chamelium: Convert VGA tests to do_test_display
Date: Tue, 22 Jan 2019 14:42:56 +0100	[thread overview]
Message-ID: <20190122134257.14038-14-maxime.ripard@bootlin.com> (raw)
In-Reply-To: <20190122134257.14038-1-maxime.ripard@bootlin.com>

The VGA tests were run so far as part of a separate function. However,
the only difference between that function and the do_test_display
function was the kind of comparison we wanted to use. Indeed, VGA
being an analog output, we can't rely on a pixel perfect image, and
thus only compare the CRCs, but we need to make some more advanced
comparison.

Let's add a new check method, add support for the analog check to
do_test_display and remove the old version.

Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 tests/kms_chamelium.c | 92 ++++++++++++++++---------------------------
 1 file changed, 33 insertions(+), 59 deletions(-)

diff --git a/tests/kms_chamelium.c b/tests/kms_chamelium.c
index 8230cb852cfb..eaea9c18832a 100644
--- a/tests/kms_chamelium.c
+++ b/tests/kms_chamelium.c
@@ -528,6 +528,7 @@ static int chamelium_get_pattern_fb(data_t *data, size_t width, size_t height,
 }
 
 enum chamelium_check {
+	CHAMELIUM_CHECK_ANALOG,
 	CHAMELIUM_CHECK_CRC,
 };
 
@@ -579,6 +580,18 @@ static void do_test_display(data_t *data, struct chamelium_port *port,
 
 		free(expected_crc);
 		free(crc);
+	} else if (check == CHAMELIUM_CHECK_ANALOG) {
+		struct chamelium_frame_dump *dump;
+
+		igt_assert(count == 1);
+
+		dump = chamelium_port_dump_pixels(data->chamelium, port, 0, 0,
+						  0, 0);
+		chamelium_crop_analog_frame(dump, mode->hdisplay,
+					    mode->vdisplay);
+		chamelium_assert_analog_frame_match_or_dump(data->chamelium,
+							    port, dump, &fb);
+		chamelium_destroy_frame_dump(dump);
 	}
 
 	igt_remove_fb(data->drm_fd, &frame_fb);
@@ -589,8 +602,9 @@ static void test_display_one_mode(data_t *data, struct chamelium_port *port,
 				  uint32_t fourcc, enum chamelium_check check,
 				  int count)
 {
-	igt_output_t *output;
 	drmModeConnector *connector;
+	drmModeModeInfo *mode;
+	igt_output_t *output;
 	igt_plane_t *primary;
 
 	reset_state(data, port);
@@ -600,8 +614,14 @@ static void test_display_one_mode(data_t *data, struct chamelium_port *port,
 	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
 	igt_assert(primary);
 
-	do_test_display(data, port, output, &connector->modes[0], fourcc,
-			check, count);
+	mode = &connector->modes[0];
+	if (check == CHAMELIUM_CHECK_ANALOG) {
+		bool bridge = check_analog_bridge(data, port);
+
+		igt_assert(!(bridge && prune_vga_mode(data, mode)));
+	}
+
+	do_test_display(data, port, output, mode, fourcc, check, count);
 
 	drmModeFreeConnector(connector);
 }
@@ -613,6 +633,7 @@ static void test_display_all_modes(data_t *data, struct chamelium_port *port,
 	igt_output_t *output;
 	igt_plane_t *primary;
 	drmModeConnector *connector;
+	bool bridge;
 	int i;
 
 	reset_state(data, port);
@@ -622,9 +643,16 @@ static void test_display_all_modes(data_t *data, struct chamelium_port *port,
 	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
 	igt_assert(primary);
 
+	if (check == CHAMELIUM_CHECK_ANALOG)
+		bridge = check_analog_bridge(data, port);
+
 	for (i = 0; i < connector->count_modes; i++) {
 		drmModeModeInfo *mode = &connector->modes[i];
 
+		if (check == CHAMELIUM_CHECK_ANALOG && bridge &&
+		    prune_vga_mode(data, mode))
+			continue;
+
 		do_test_display(data, port, output, mode, fourcc, check, count);
 	}
 
@@ -675,61 +703,6 @@ test_display_frame_dump(data_t *data, struct chamelium_port *port)
 	drmModeFreeConnector(connector);
 }
 
-static void
-test_analog_frame_dump(data_t *data, struct chamelium_port *port)
-{
-	igt_output_t *output;
-	igt_plane_t *primary;
-	struct igt_fb fb;
-	struct chamelium_frame_dump *frame;
-	drmModeModeInfo *mode;
-	drmModeConnector *connector;
-	int fb_id, i;
-	bool bridge;
-
-	reset_state(data, port);
-
-	output = prepare_output(data, port);
-	connector = chamelium_port_get_connector(data->chamelium, port, false);
-	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
-	igt_assert(primary);
-
-	bridge = check_analog_bridge(data, port);
-
-	for (i = 0; i < connector->count_modes; i++) {
-		mode = &connector->modes[i];
-
-		if (bridge && prune_vga_mode(data, mode))
-			continue;
-
-		fb_id = igt_create_color_pattern_fb(data->drm_fd,
-						    mode->hdisplay, mode->vdisplay,
-						    DRM_FORMAT_XRGB8888,
-						    LOCAL_DRM_FORMAT_MOD_NONE,
-						    0, 0, 0, &fb);
-		igt_assert(fb_id > 0);
-
-		enable_output(data, port, output, mode, &fb);
-
-		igt_debug("Reading frame dumps from Chamelium...\n");
-
-		frame = chamelium_port_dump_pixels(data->chamelium, port, 0, 0,
-						   0, 0);
-
-		chamelium_crop_analog_frame(frame, mode->hdisplay,
-					    mode->vdisplay);
-
-		chamelium_assert_analog_frame_match_or_dump(data->chamelium,
-							    port, frame, &fb);
-
-		chamelium_destroy_frame_dump(frame);
-
-		igt_remove_fb(data->drm_fd, &fb);
-	}
-
-	drmModeFreeConnector(connector);
-}
-
 static void
 test_hpd_without_ddc(data_t *data, struct chamelium_port *port)
 {
@@ -1041,7 +1014,8 @@ igt_main
 			test_hpd_without_ddc(&data, port);
 
 		connector_subtest("vga-frame-dump", VGA)
-			test_analog_frame_dump(&data, port);
+			test_display_all_modes(&data, port, DRM_FORMAT_XRGB8888,
+					       CHAMELIUM_CHECK_ANALOG, 1);
 	}
 
 	igt_subtest_group {
-- 
2.20.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

  parent reply	other threads:[~2019-01-22 13:43 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-22 13:42 [igt-dev] [PATCH i-g-t v3 00/14] igt: chamelium: Test YUV buffers using the Chamelium Maxime Ripard
2019-01-22 13:42 ` [igt-dev] [PATCH i-g-t v3 01/14] igt: fb: Add subsampling parameters to the formats Maxime Ripard
2019-01-22 13:42 ` [igt-dev] [PATCH i-g-t v3 02/14] igt: fb: Reduce tile size alignment for non intel platforms Maxime Ripard
2019-01-22 13:42 ` [igt-dev] [PATCH i-g-t v3 03/14] igt: fb: generic YUV convertion function Maxime Ripard
2019-01-22 13:42 ` [igt-dev] [PATCH i-g-t v3 04/14] igt: fb: Move i915 YUV buffer clearing code to a function Maxime Ripard
2019-01-22 13:42 ` [igt-dev] [PATCH i-g-t v3 05/14] igt: fb: Move size computation to the common path Maxime Ripard
2019-01-22 13:42 ` [igt-dev] [PATCH i-g-t v3 06/14] igt: fb: Refactor dumb buffer allocation path Maxime Ripard
2019-01-22 13:42 ` [igt-dev] [PATCH i-g-t v3 07/14] igt: fb: Account for all planes bpp Maxime Ripard
2019-01-22 13:42 ` [igt-dev] [PATCH i-g-t v3 08/14] igt: fb: Don't pass the stride when allocating a dumb, multi-planar buffer Maxime Ripard
2019-01-22 13:42 ` [igt-dev] [PATCH i-g-t v3 09/14] igt: fb: Clear YUV dumb buffers Maxime Ripard
2019-01-22 13:42 ` [igt-dev] [PATCH i-g-t v3 10/14] igt: fb: Rework YUV i915 allocation path Maxime Ripard
2019-01-22 13:42 ` [igt-dev] [PATCH i-g-t v3 11/14] igt: fb: Add a bunch of new YUV formats Maxime Ripard
2019-01-22 13:42 ` [igt-dev] [PATCH i-g-t v3 12/14] igt: tests: chamelium: Start to unify tests Maxime Ripard
2019-01-22 13:42 ` Maxime Ripard [this message]
2019-01-22 13:42 ` [igt-dev] [PATCH i-g-t v3 14/14] igt: tests: chamelium: Add YUV formats tests Maxime Ripard
2019-01-22 14:11 ` [igt-dev] ✗ Fi.CI.BAT: failure for igt: chamelium: Test YUV buffers using the Chamelium (rev5) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190122134257.14038-14-maxime.ripard@bootlin.com \
    --to=maxime.ripard@bootlin.com \
    --cc=eben@raspberrypi.org \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=petri.latvala@intel.com \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox