* [igt-dev] [PATCH i-g-t v7 0/2] kms_atomic_transition improvements
@ 2019-04-09 14:08 Stanislav Lisovskiy
2019-04-09 14:08 ` [igt-dev] [PATCH i-g-t v7 1/2] igt/tests/kms_atomic_transition: Skip transition, if no changes done Stanislav Lisovskiy
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Stanislav Lisovskiy @ 2019-04-09 14:08 UTC (permalink / raw)
To: igt-dev; +Cc: stanislav.lisovskiy, ville.syrjala, martin.peres
Fixed run_transition_test issue, which might happen when no changes
are done and wait_transition is called and made setup_parms function
tolerate if kernel can't afford having all sprite planes enabled
depending on current mode. Remove redundant condition nesting and code.
Stanislav Lisovskiy (2):
igt/tests/kms_atomic_transition: Skip transition, if no changes done
igt/tests/kms_atomic_transition: Tolerate if can't have all planes
tests/kms_atomic_transition.c | 156 +++++++++++++++++++++-------------
1 file changed, 96 insertions(+), 60 deletions(-)
--
2.17.1
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
^ permalink raw reply [flat|nested] 6+ messages in thread* [igt-dev] [PATCH i-g-t v7 1/2] igt/tests/kms_atomic_transition: Skip transition, if no changes done 2019-04-09 14:08 [igt-dev] [PATCH i-g-t v7 0/2] kms_atomic_transition improvements Stanislav Lisovskiy @ 2019-04-09 14:08 ` Stanislav Lisovskiy 2019-04-09 14:08 ` [igt-dev] [PATCH i-g-t v7 2/2] igt/tests/kms_atomic_transition: Tolerate if can't have all planes Stanislav Lisovskiy ` (2 subsequent siblings) 3 siblings, 0 replies; 6+ messages in thread From: Stanislav Lisovskiy @ 2019-04-09 14:08 UTC (permalink / raw) To: igt-dev; +Cc: stanislav.lisovskiy, ville.syrjala, martin.peres While fixing used amount of planes, discovered that if wm_setup_plane is called with specific parameter that gives parms[i].mask & mask == 0 for all used planes, then subsequent wait_transition fails in assertion on fd_completed. So added return value to wm_setup_plane, which would allow to determine, if we really need to wait for any transitions. v2: Fixed commit message, to properly describe a reasoning for wm_setup_plane changes. Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> --- tests/kms_atomic_transition.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/tests/kms_atomic_transition.c b/tests/kms_atomic_transition.c index 18f73317..638fe17e 100644 --- a/tests/kms_atomic_transition.c +++ b/tests/kms_atomic_transition.c @@ -118,11 +118,12 @@ static void configure_fencing(igt_plane_t *plane) igt_assert_eq(ret, 0); } -static void +static int wm_setup_plane(igt_display_t *display, enum pipe pipe, uint32_t mask, struct plane_parms *parms, bool fencing) { igt_plane_t *plane; + int planes_set_up = 0; /* * Make sure these buffers are suited for display use @@ -133,8 +134,10 @@ wm_setup_plane(igt_display_t *display, enum pipe pipe, int i = plane->index; if (!mask || !(parms[i].mask & mask)) { - if (plane->values[IGT_PLANE_FB_ID]) + if (plane->values[IGT_PLANE_FB_ID]) { igt_plane_set_fb(plane, NULL); + planes_set_up++; + } continue; } @@ -144,7 +147,10 @@ wm_setup_plane(igt_display_t *display, enum pipe pipe, igt_plane_set_fb(plane, parms[i].fb); igt_fb_set_size(parms[i].fb, plane, parms[i].width, parms[i].height); igt_plane_set_size(plane, parms[i].width, parms[i].height); + + planes_set_up++; } + return planes_set_up; } static void ev_page_flip(int fd, unsigned seq, unsigned tv_sec, unsigned tv_usec, void *user_data) @@ -544,7 +550,8 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output igt_output_set_pipe(output, pipe); - wm_setup_plane(display, pipe, i, parms, fencing); + if (!wm_setup_plane(display, pipe, i, parms, fencing)) + continue; atomic_commit(display, pipe, flags, (void *)(unsigned long)i, fencing); wait_for_transition(display, pipe, nonblocking, fencing); @@ -552,7 +559,8 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output if (type == TRANSITION_MODESET_DISABLE) { igt_output_set_pipe(output, PIPE_NONE); - wm_setup_plane(display, pipe, 0, parms, fencing); + if (!wm_setup_plane(display, pipe, 0, parms, fencing)) + continue; atomic_commit(display, pipe, flags, (void *) 0UL, fencing); wait_for_transition(display, pipe, nonblocking, fencing); @@ -568,7 +576,8 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output n_enable_planes < pipe_obj->n_planes) continue; - wm_setup_plane(display, pipe, j, parms, fencing); + if (!wm_setup_plane(display, pipe, j, parms, fencing)) + continue; if (type >= TRANSITION_MODESET) igt_output_override_mode(output, &override_mode); @@ -576,7 +585,9 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output atomic_commit(display, pipe, flags, (void *)(unsigned long) j, fencing); wait_for_transition(display, pipe, nonblocking, fencing); - wm_setup_plane(display, pipe, i, parms, fencing); + if (!wm_setup_plane(display, pipe, i, parms, fencing)) + continue; + if (type >= TRANSITION_MODESET) igt_output_override_mode(output, NULL); -- 2.17.1 _______________________________________________ igt-dev mailing list igt-dev@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/igt-dev ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [igt-dev] [PATCH i-g-t v7 2/2] igt/tests/kms_atomic_transition: Tolerate if can't have all planes 2019-04-09 14:08 [igt-dev] [PATCH i-g-t v7 0/2] kms_atomic_transition improvements Stanislav Lisovskiy 2019-04-09 14:08 ` [igt-dev] [PATCH i-g-t v7 1/2] igt/tests/kms_atomic_transition: Skip transition, if no changes done Stanislav Lisovskiy @ 2019-04-09 14:08 ` Stanislav Lisovskiy 2019-04-09 15:17 ` Maarten Lankhorst 2019-04-09 15:36 ` [igt-dev] ✓ Fi.CI.BAT: success for kms_atomic_transition improvements (rev15) Patchwork 2019-04-10 1:06 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork 3 siblings, 1 reply; 6+ messages in thread From: Stanislav Lisovskiy @ 2019-04-09 14:08 UTC (permalink / raw) To: igt-dev; +Cc: stanislav.lisovskiy, ville.syrjala, martin.peres With some upcoming changes i915 might not allow all sprite planes enabled, depending on available bandwidth limitation. Thus the test need to decrement amount of planes and try again, instead of panicking. v2: Removed excessive nested conditions, making code a bit more readable(hopefully). v3: Stopped using global n_planes variable as it might cause resources being unreleased. Using now parms[i].mask as a way to determine if plane has to be included into commit. v4: Removed unneeded n_overlays initialization. v5: Randomize which of sprite planes to remove if hitting resource limits. v6: Replace igt_warn with igt_info, to make IGT tests happier. v7: Removed unneeded retry logic, made plane random removal simplier. Great thanks to Maarten Lankhorst for suggestions. Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> --- tests/kms_atomic_transition.c | 133 ++++++++++++++++++++-------------- 1 file changed, 79 insertions(+), 54 deletions(-) diff --git a/tests/kms_atomic_transition.c b/tests/kms_atomic_transition.c index 638fe17e..4b530e56 100644 --- a/tests/kms_atomic_transition.c +++ b/tests/kms_atomic_transition.c @@ -184,6 +184,9 @@ static void set_sprite_wh(igt_display_t *display, enum pipe pipe, plane->type == DRM_PLANE_TYPE_CURSOR) continue; + if (!parms[i].mask) + continue; + parms[i].width = w; parms[i].height = h; } @@ -212,9 +215,10 @@ static void setup_parms(igt_display_t *display, enum pipe pipe, unsigned sprite_width, sprite_height, prev_w, prev_h; bool max_sprite_width, max_sprite_height, alpha = true; uint32_t n_planes = display->pipes[pipe].n_planes; - uint32_t n_overlays = 0, overlays[n_planes]; - igt_plane_t *plane; - uint32_t iter_mask = 3; + uint32_t n_overlays, overlays[n_planes]; + igt_plane_t *plane, *primary, *cursor; + uint32_t iter_mask; + int ret = 0; do_or_die(drmGetCap(display->drm_fd, DRM_CAP_CURSOR_WIDTH, &cursor_width)); if (cursor_width >= mode->hdisplay) @@ -224,6 +228,9 @@ static void setup_parms(igt_display_t *display, enum pipe pipe, if (cursor_height >= mode->vdisplay) cursor_height = mode->vdisplay; + n_overlays = 0; + iter_mask = 3; + for_each_plane_on_pipe(display, pipe, plane) { int i = plane->index; @@ -232,17 +239,17 @@ static void setup_parms(igt_display_t *display, enum pipe pipe, parms[i].width = mode->hdisplay; parms[i].height = mode->vdisplay; parms[i].mask = 1 << 0; + primary = plane; } else if (plane->type == DRM_PLANE_TYPE_CURSOR) { parms[i].fb = argb_fb; parms[i].width = cursor_width; parms[i].height = cursor_height; parms[i].mask = 1 << 1; + cursor = plane; } else { parms[i].fb = sprite_fb; parms[i].mask = 1 << 2; - iter_mask |= 1 << 2; - overlays[n_overlays++] = i; } } @@ -278,16 +285,13 @@ static void setup_parms(igt_display_t *display, enum pipe pipe, * Pre gen9 not all sizes are supported, find the biggest possible * size that can be enabled on all sprite planes. */ -retry: prev_w = sprite_width = cursor_width; prev_h = sprite_height = cursor_height; max_sprite_width = (sprite_width == mode->hdisplay); max_sprite_height = (sprite_height == mode->vdisplay); - while (1) { - int ret; - + while (!max_sprite_width && !max_sprite_height) { set_sprite_wh(display, pipe, parms, sprite_fb, alpha, sprite_width, sprite_height); @@ -295,56 +299,78 @@ retry: ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL); igt_assert(!is_atomic_check_failure_errno(ret)); - if (is_atomic_check_plane_size_errno(ret)) { - if (cursor_width == sprite_width && - cursor_height == sprite_height) { - igt_assert_f(alpha, - "Cannot configure the test with all sprite planes enabled\n"); - - /* retry once with XRGB format. */ - alpha = false; - goto retry; - } - - sprite_width = prev_w; - sprite_height = prev_h; - - if (max_sprite_width && max_sprite_height) { - set_sprite_wh(display, pipe, parms, sprite_fb, - alpha, sprite_width, sprite_height); - break; - } - - if (!max_sprite_width) - max_sprite_width = true; - else - max_sprite_height = true; - } else { + if (!is_atomic_check_plane_size_errno(ret)) { prev_w = sprite_width; prev_h = sprite_height; - } - - if (!max_sprite_width) { - sprite_width *= 2; - + + sprite_width *= max_sprite_width ? 1 : 2; if (sprite_width >= mode->hdisplay) { max_sprite_width = true; - sprite_width = mode->hdisplay; } - } else if (!max_sprite_height) { - sprite_height *= 2; + sprite_height *= max_sprite_height ? 1 : 2; if (sprite_height >= mode->vdisplay) { max_sprite_height = true; - sprite_height = mode->vdisplay; } - } else - /* Max sized sprites for all! */ - break; + continue; + } + + if (cursor_width == sprite_width && + cursor_height == sprite_height) { + /* retry once with XRGB format. */ + if (alpha) { + alpha = false; + igt_info("Removed alpha\n"); + } + else { + igt_plane_t *removed_plane = NULL; + igt_assert_f(n_planes > 0, "No planes left to proceed with!"); + if (n_overlays > 0) { + uint32_t plane_to_remove = hars_petruska_f54_1_random_unsafe_max(n_overlays); + removed_plane = &display->pipes[pipe].planes[overlays[plane_to_remove]]; + igt_plane_set_fb(removed_plane, NULL); + while (plane_to_remove < (n_overlays - 1)) { + overlays[plane_to_remove] = overlays[plane_to_remove + 1]; + plane_to_remove++; + } + n_overlays--; + } + else { + if (primary) { + removed_plane = primary; + igt_plane_set_fb(primary, NULL); + primary = NULL; + } + else if (cursor) { + removed_plane = cursor; + igt_plane_set_fb(cursor, NULL); + cursor = NULL; + } + } + if (removed_plane) { + parms[removed_plane->index].mask = 0; + igt_info("Removed plane %d\n", removed_plane->index); + } + n_planes--; + igt_info("Reduced available planes to %d\n", n_planes); + } + continue; + } + + sprite_width = prev_w; + sprite_height = prev_h; + + if (!max_sprite_width) + max_sprite_width = true; + else + max_sprite_height = true; } + set_sprite_wh(display, pipe, parms, sprite_fb, + alpha, sprite_width, sprite_height); + igt_info("Running test on pipe %s with resolution %dx%d and sprite size %dx%d alpha %i\n", kmstest_pipe_name(pipe), mode->hdisplay, mode->vdisplay, sprite_width, sprite_height, alpha); @@ -436,7 +462,7 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output uint32_t iter_max, i; struct plane_parms parms[pipe_obj->n_planes]; unsigned flags = 0; - int ret; + int ret = 0; if (fencing) prepare_fencing(display, pipe); @@ -463,7 +489,6 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output if (flags & DRM_MODE_ATOMIC_ALLOW_MODESET) { igt_output_set_pipe(output, PIPE_NONE); - igt_display_commit2(display, COMMIT_ATOMIC); igt_output_set_pipe(output, pipe); @@ -479,7 +504,6 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output * planes to fix this */ while (1) { - wm_setup_plane(display, pipe, iter_max - 1, parms, false); if (fencing) igt_pipe_request_out_fence(pipe_obj); @@ -498,9 +522,6 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output plane->type == DRM_PLANE_TYPE_CURSOR) continue; - if (parms[i].width <= 512) - continue; - parms[i].width /= 2; ret = 1; igt_info("Reducing sprite %i to %ux%u\n", i - 1, parms[i].width, parms[i].height); @@ -511,6 +532,8 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output igt_skip("Cannot run tests without proper size sprite planes\n"); } + wm_setup_plane(display, pipe, iter_max - 1, parms, false); + igt_display_commit2(display, COMMIT_ATOMIC); if (type == TRANSITION_AFTER_FREE) { @@ -525,8 +548,10 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output } /* force planes to be part of commit */ - for_each_plane_on_pipe(display, pipe, plane) - igt_plane_set_position(plane, 0, 0); + for_each_plane_on_pipe(display, pipe, plane) { + if (parms[plane->index].mask) + igt_plane_set_position(plane, 0, 0); + } igt_display_commit2(display, COMMIT_ATOMIC); -- 2.17.1 _______________________________________________ igt-dev mailing list igt-dev@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/igt-dev ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [igt-dev] [PATCH i-g-t v7 2/2] igt/tests/kms_atomic_transition: Tolerate if can't have all planes 2019-04-09 14:08 ` [igt-dev] [PATCH i-g-t v7 2/2] igt/tests/kms_atomic_transition: Tolerate if can't have all planes Stanislav Lisovskiy @ 2019-04-09 15:17 ` Maarten Lankhorst 0 siblings, 0 replies; 6+ messages in thread From: Maarten Lankhorst @ 2019-04-09 15:17 UTC (permalink / raw) To: Stanislav Lisovskiy, igt-dev; +Cc: ville.syrjala, martin.peres Op 09-04-2019 om 16:08 schreef Stanislav Lisovskiy: > With some upcoming changes i915 might not allow > all sprite planes enabled, depending on available > bandwidth limitation. Thus the test need to decrement > amount of planes and try again, instead of panicking. > > v2: Removed excessive nested conditions, making code a bit > more readable(hopefully). > > v3: Stopped using global n_planes variable as it might cause > resources being unreleased. > Using now parms[i].mask as a way to determine if plane > has to be included into commit. > > v4: Removed unneeded n_overlays initialization. > > v5: Randomize which of sprite planes to remove if hitting > resource limits. > > v6: Replace igt_warn with igt_info, to make IGT tests happier. > > v7: Removed unneeded retry logic, made plane random removal simplier. > Great thanks to Maarten Lankhorst for suggestions. What I mean is replacing alpha, at this snippet: parms[i].fb = sprite_fb; Add: alpha = igt_plane_has_format_mod(plane, DRM_FORMAT_ARGB8888, LOCAL_DRM_FORMAT_MOD_NONE)) This should get rid of the retry logic for alpha, and should probably be done as a preparation patch to simplify things. I also think we should be able to enable at least the primary, cursor and a single overlay plane. If we can't do that we fail hard.. Because of this I don't think we should handle removing primary or cursor plane, we should probably fail in that case. ~Maarten > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> > --- > tests/kms_atomic_transition.c | 133 ++++++++++++++++++++-------------- > 1 file changed, 79 insertions(+), 54 deletions(-) > > diff --git a/tests/kms_atomic_transition.c b/tests/kms_atomic_transition.c > index 638fe17e..4b530e56 100644 > --- a/tests/kms_atomic_transition.c > +++ b/tests/kms_atomic_transition.c > @@ -184,6 +184,9 @@ static void set_sprite_wh(igt_display_t *display, enum pipe pipe, > plane->type == DRM_PLANE_TYPE_CURSOR) > continue; > > + if (!parms[i].mask) > + continue; > + > parms[i].width = w; > parms[i].height = h; > } > @@ -212,9 +215,10 @@ static void setup_parms(igt_display_t *display, enum pipe pipe, > unsigned sprite_width, sprite_height, prev_w, prev_h; > bool max_sprite_width, max_sprite_height, alpha = true; > uint32_t n_planes = display->pipes[pipe].n_planes; > - uint32_t n_overlays = 0, overlays[n_planes]; > - igt_plane_t *plane; > - uint32_t iter_mask = 3; > + uint32_t n_overlays, overlays[n_planes]; > + igt_plane_t *plane, *primary, *cursor; > + uint32_t iter_mask; > + int ret = 0; > > do_or_die(drmGetCap(display->drm_fd, DRM_CAP_CURSOR_WIDTH, &cursor_width)); > if (cursor_width >= mode->hdisplay) > @@ -224,6 +228,9 @@ static void setup_parms(igt_display_t *display, enum pipe pipe, > if (cursor_height >= mode->vdisplay) > cursor_height = mode->vdisplay; > > + n_overlays = 0; > + iter_mask = 3; > + > for_each_plane_on_pipe(display, pipe, plane) { > int i = plane->index; > > @@ -232,17 +239,17 @@ static void setup_parms(igt_display_t *display, enum pipe pipe, > parms[i].width = mode->hdisplay; > parms[i].height = mode->vdisplay; > parms[i].mask = 1 << 0; > + primary = plane; > } else if (plane->type == DRM_PLANE_TYPE_CURSOR) { > parms[i].fb = argb_fb; > parms[i].width = cursor_width; > parms[i].height = cursor_height; > parms[i].mask = 1 << 1; > + cursor = plane; > } else { > parms[i].fb = sprite_fb; > parms[i].mask = 1 << 2; > - > iter_mask |= 1 << 2; > - > overlays[n_overlays++] = i; > } > } > @@ -278,16 +285,13 @@ static void setup_parms(igt_display_t *display, enum pipe pipe, > * Pre gen9 not all sizes are supported, find the biggest possible > * size that can be enabled on all sprite planes. > */ > -retry: > prev_w = sprite_width = cursor_width; > prev_h = sprite_height = cursor_height; > > max_sprite_width = (sprite_width == mode->hdisplay); > max_sprite_height = (sprite_height == mode->vdisplay); > > - while (1) { > - int ret; > - > + while (!max_sprite_width && !max_sprite_height) { > set_sprite_wh(display, pipe, parms, sprite_fb, > alpha, sprite_width, sprite_height); > > @@ -295,56 +299,78 @@ retry: > ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL); > igt_assert(!is_atomic_check_failure_errno(ret)); > > - if (is_atomic_check_plane_size_errno(ret)) { > - if (cursor_width == sprite_width && > - cursor_height == sprite_height) { > - igt_assert_f(alpha, > - "Cannot configure the test with all sprite planes enabled\n"); > - > - /* retry once with XRGB format. */ > - alpha = false; > - goto retry; > - } > - > - sprite_width = prev_w; > - sprite_height = prev_h; > - > - if (max_sprite_width && max_sprite_height) { > - set_sprite_wh(display, pipe, parms, sprite_fb, > - alpha, sprite_width, sprite_height); > - break; > - } > - > - if (!max_sprite_width) > - max_sprite_width = true; > - else > - max_sprite_height = true; > - } else { > + if (!is_atomic_check_plane_size_errno(ret)) { > prev_w = sprite_width; > prev_h = sprite_height; > - } > - > - if (!max_sprite_width) { > - sprite_width *= 2; > - > + > + sprite_width *= max_sprite_width ? 1 : 2; > if (sprite_width >= mode->hdisplay) { > max_sprite_width = true; > - > sprite_width = mode->hdisplay; > } > - } else if (!max_sprite_height) { > - sprite_height *= 2; > > + sprite_height *= max_sprite_height ? 1 : 2; > if (sprite_height >= mode->vdisplay) { > max_sprite_height = true; > - > sprite_height = mode->vdisplay; > } > - } else > - /* Max sized sprites for all! */ > - break; > + continue; > + } > + > + if (cursor_width == sprite_width && > + cursor_height == sprite_height) { > + /* retry once with XRGB format. */ > + if (alpha) { > + alpha = false; > + igt_info("Removed alpha\n"); > + } > + else { > + igt_plane_t *removed_plane = NULL; > + igt_assert_f(n_planes > 0, "No planes left to proceed with!"); > + if (n_overlays > 0) { > + uint32_t plane_to_remove = hars_petruska_f54_1_random_unsafe_max(n_overlays); > + removed_plane = &display->pipes[pipe].planes[overlays[plane_to_remove]]; > + igt_plane_set_fb(removed_plane, NULL); > + while (plane_to_remove < (n_overlays - 1)) { > + overlays[plane_to_remove] = overlays[plane_to_remove + 1]; > + plane_to_remove++; > + } > + n_overlays--; > + } > + else { > + if (primary) { > + removed_plane = primary; > + igt_plane_set_fb(primary, NULL); > + primary = NULL; > + } > + else if (cursor) { > + removed_plane = cursor; > + igt_plane_set_fb(cursor, NULL); > + cursor = NULL; > + } > + } > + if (removed_plane) { > + parms[removed_plane->index].mask = 0; > + igt_info("Removed plane %d\n", removed_plane->index); > + } > + n_planes--; > + igt_info("Reduced available planes to %d\n", n_planes); > + } > + continue; > + } > + > + sprite_width = prev_w; > + sprite_height = prev_h; > + > + if (!max_sprite_width) > + max_sprite_width = true; > + else > + max_sprite_height = true; > } > > + set_sprite_wh(display, pipe, parms, sprite_fb, > + alpha, sprite_width, sprite_height); > + > igt_info("Running test on pipe %s with resolution %dx%d and sprite size %dx%d alpha %i\n", > kmstest_pipe_name(pipe), mode->hdisplay, mode->vdisplay, > sprite_width, sprite_height, alpha); > @@ -436,7 +462,7 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output > uint32_t iter_max, i; > struct plane_parms parms[pipe_obj->n_planes]; > unsigned flags = 0; > - int ret; > + int ret = 0; > > if (fencing) > prepare_fencing(display, pipe); > @@ -463,7 +489,6 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output > > if (flags & DRM_MODE_ATOMIC_ALLOW_MODESET) { > igt_output_set_pipe(output, PIPE_NONE); > - > igt_display_commit2(display, COMMIT_ATOMIC); > > igt_output_set_pipe(output, pipe); > @@ -479,7 +504,6 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output > * planes to fix this > */ > while (1) { > - wm_setup_plane(display, pipe, iter_max - 1, parms, false); > > if (fencing) > igt_pipe_request_out_fence(pipe_obj); > @@ -498,9 +522,6 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output > plane->type == DRM_PLANE_TYPE_CURSOR) > continue; > > - if (parms[i].width <= 512) > - continue; > - > parms[i].width /= 2; > ret = 1; > igt_info("Reducing sprite %i to %ux%u\n", i - 1, parms[i].width, parms[i].height); > @@ -511,6 +532,8 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output > igt_skip("Cannot run tests without proper size sprite planes\n"); > } > > + wm_setup_plane(display, pipe, iter_max - 1, parms, false); > + > igt_display_commit2(display, COMMIT_ATOMIC); > > if (type == TRANSITION_AFTER_FREE) { > @@ -525,8 +548,10 @@ run_transition_test(igt_display_t *display, enum pipe pipe, igt_output_t *output > } > > /* force planes to be part of commit */ > - for_each_plane_on_pipe(display, pipe, plane) > - igt_plane_set_position(plane, 0, 0); > + for_each_plane_on_pipe(display, pipe, plane) { > + if (parms[plane->index].mask) > + igt_plane_set_position(plane, 0, 0); > + } > > igt_display_commit2(display, COMMIT_ATOMIC); > _______________________________________________ igt-dev mailing list igt-dev@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/igt-dev ^ permalink raw reply [flat|nested] 6+ messages in thread
* [igt-dev] ✓ Fi.CI.BAT: success for kms_atomic_transition improvements (rev15) 2019-04-09 14:08 [igt-dev] [PATCH i-g-t v7 0/2] kms_atomic_transition improvements Stanislav Lisovskiy 2019-04-09 14:08 ` [igt-dev] [PATCH i-g-t v7 1/2] igt/tests/kms_atomic_transition: Skip transition, if no changes done Stanislav Lisovskiy 2019-04-09 14:08 ` [igt-dev] [PATCH i-g-t v7 2/2] igt/tests/kms_atomic_transition: Tolerate if can't have all planes Stanislav Lisovskiy @ 2019-04-09 15:36 ` Patchwork 2019-04-10 1:06 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork 3 siblings, 0 replies; 6+ messages in thread From: Patchwork @ 2019-04-09 15:36 UTC (permalink / raw) To: Stanislav Lisovskiy; +Cc: igt-dev == Series Details == Series: kms_atomic_transition improvements (rev15) URL : https://patchwork.freedesktop.org/series/58728/ State : success == Summary == CI Bug Log - changes from CI_DRM_5897 -> IGTPW_2830 ==================================================== Summary ------- **SUCCESS** No regressions found. External URL: https://patchwork.freedesktop.org/api/1.0/series/58728/revisions/15/mbox/ Possible new issues ------------------- Here are the unknown changes that may have been introduced in IGTPW_2830: ### IGT changes ### #### Suppressed #### The following results come from untrusted machines, tests, or statuses. They do not affect the overall result. * igt@gem_exec_fence@basic-busy-default: - {fi-icl-u2}: PASS -> INCOMPLETE Known issues ------------ Here are the changes found in IGTPW_2830 that come from known issues: ### IGT changes ### #### Issues hit #### * igt@gem_cpu_reloc@basic: - fi-icl-u3: PASS -> INCOMPLETE [fdo#110246] * igt@gem_exec_store@basic-bsd1: - fi-kbl-r: NOTRUN -> SKIP [fdo#109271] +41 * igt@i915_selftest@live_evict: - fi-bsw-kefka: PASS -> DMESG-WARN [fdo#107709] * igt@i915_selftest@live_hangcheck: - fi-bxt-dsi: PASS -> INCOMPLETE [fdo#103927] * igt@kms_busy@basic-flip-a: - fi-bsw-n3050: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +1 * igt@kms_busy@basic-flip-c: - fi-blb-e6850: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] * igt@kms_chamelium@hdmi-crc-fast: - fi-bsw-n3050: NOTRUN -> SKIP [fdo#109271] +62 * igt@kms_cursor_legacy@basic-flip-after-cursor-varying-size: - fi-glk-dsi: PASS -> INCOMPLETE [fdo#103359] / [k.org#198133] * igt@kms_pipe_crc_basic@hang-read-crc-pipe-c: - fi-blb-e6850: NOTRUN -> SKIP [fdo#109271] +48 * igt@runner@aborted: - fi-bsw-kefka: NOTRUN -> FAIL [fdo#107709] #### Possible fixes #### * igt@gem_exec_suspend@basic-s4-devices: - fi-blb-e6850: INCOMPLETE [fdo#107718] -> PASS * igt@i915_selftest@live_contexts: - fi-bdw-gvtdvm: DMESG-FAIL [fdo#110235 ] -> PASS - fi-skl-gvtdvm: DMESG-FAIL [fdo#110235 ] -> PASS {name}: This element is suppressed. This means it is ignored when computing the status of the difference (SUCCESS, WARNING, or FAILURE). [fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359 [fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927 [fdo#107709]: https://bugs.freedesktop.org/show_bug.cgi?id=107709 [fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718 [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271 [fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278 [fdo#110235 ]: https://bugs.freedesktop.org/show_bug.cgi?id=110235 [fdo#110246]: https://bugs.freedesktop.org/show_bug.cgi?id=110246 [k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133 Participating hosts (44 -> 39) ------------------------------ Additional (2): fi-kbl-r fi-bsw-n3050 Missing (7): fi-skl-6770hq fi-byt-squawks fi-bsw-cyan fi-apl-guc fi-pnv-d510 fi-icl-y fi-bdw-samus Build changes ------------- * IGT: IGT_4934 -> IGTPW_2830 CI_DRM_5897: 7d07e025e78603d6270bc115fdb6c1efea6e66a5 @ git://anongit.freedesktop.org/gfx-ci/linux IGTPW_2830: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2830/ IGT_4934: dc4f45eb6874331daec870dc1e4cfc3ac5c49311 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools == Logs == For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2830/ _______________________________________________ igt-dev mailing list igt-dev@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/igt-dev ^ permalink raw reply [flat|nested] 6+ messages in thread
* [igt-dev] ✗ Fi.CI.IGT: failure for kms_atomic_transition improvements (rev15) 2019-04-09 14:08 [igt-dev] [PATCH i-g-t v7 0/2] kms_atomic_transition improvements Stanislav Lisovskiy ` (2 preceding siblings ...) 2019-04-09 15:36 ` [igt-dev] ✓ Fi.CI.BAT: success for kms_atomic_transition improvements (rev15) Patchwork @ 2019-04-10 1:06 ` Patchwork 3 siblings, 0 replies; 6+ messages in thread From: Patchwork @ 2019-04-10 1:06 UTC (permalink / raw) To: Stanislav Lisovskiy; +Cc: igt-dev == Series Details == Series: kms_atomic_transition improvements (rev15) URL : https://patchwork.freedesktop.org/series/58728/ State : failure == Summary == CI Bug Log - changes from CI_DRM_5897_full -> IGTPW_2830_full ==================================================== Summary ------- **FAILURE** Serious unknown changes coming with IGTPW_2830_full absolutely need to be verified manually. If you think the reported changes have nothing to do with the changes introduced in IGTPW_2830_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI. External URL: https://patchwork.freedesktop.org/api/1.0/series/58728/revisions/15/mbox/ Possible new issues ------------------- Here are the unknown changes that may have been introduced in IGTPW_2830_full: ### IGT changes ### #### Possible regressions #### * igt@kms_atomic_transition@plane-all-transition: - shard-kbl: PASS -> DMESG-WARN Known issues ------------ Here are the changes found in IGTPW_2830_full that come from known issues: ### IGT changes ### #### Issues hit #### * igt@gem_busy@extended-bsd1: - shard-iclb: NOTRUN -> SKIP [fdo#109276] +6 * igt@gem_mocs_settings@mocs-rc6-ctx-dirty-render: - shard-glk: NOTRUN -> SKIP [fdo#109271] +25 * igt@gem_stolen@stolen-clear: - shard-iclb: NOTRUN -> SKIP [fdo#109277] +1 * igt@i915_pm_rc6_residency@rc6-accuracy: - shard-kbl: PASS -> SKIP [fdo#109271] +1 * igt@i915_pm_rpm@gem-execbuf-stress-pc8: - shard-iclb: NOTRUN -> SKIP [fdo#109506] * igt@kms_atomic_transition@1x-modeset-transitions: - shard-apl: PASS -> INCOMPLETE [fdo#103927] * igt@kms_atomic_transition@1x-modeset-transitions-nonblocking: - shard-apl: NOTRUN -> FAIL [fdo#109660] * igt@kms_atomic_transition@6x-modeset-transitions: - shard-iclb: NOTRUN -> SKIP [fdo#109278] +1 * igt@kms_atomic_transition@6x-modeset-transitions-nonblocking: - shard-apl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +18 * igt@kms_atomic_transition@plane-all-modeset-transition: - shard-kbl: PASS -> INCOMPLETE [fdo#103665] +1 * igt@kms_busy@extended-modeset-hang-oldfb-render-e: - shard-kbl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +1 * igt@kms_busy@extended-pageflip-hang-oldfb-render-a: - shard-kbl: NOTRUN -> DMESG-WARN [fdo#103558] / [fdo#105602] * igt@kms_chamelium@vga-edid-read: - shard-iclb: NOTRUN -> SKIP [fdo#109284] * igt@kms_content_protection@atomic: - shard-iclb: NOTRUN -> SKIP [fdo#109300] * igt@kms_content_protection@legacy: - shard-apl: NOTRUN -> FAIL [fdo#110321] / [fdo#110336] * igt@kms_crtc_background_color: - shard-iclb: NOTRUN -> SKIP [fdo#109305] * igt@kms_cursor_crc@cursor-128x128-suspend: - shard-apl: PASS -> DMESG-WARN [fdo#108566] * igt@kms_cursor_crc@cursor-64x64-onscreen: - shard-glk: NOTRUN -> FAIL [fdo#103232] +2 * igt@kms_cursor_crc@cursor-size-change: - shard-apl: NOTRUN -> FAIL [fdo#103232] - shard-kbl: PASS -> FAIL [fdo#103232] * igt@kms_cursor_legacy@cursor-vs-flip-atomic-transitions: - shard-iclb: PASS -> FAIL [fdo#103355] * igt@kms_fbcon_fbt@fbc: - shard-iclb: PASS -> DMESG-WARN [fdo#109593] * igt@kms_flip@2x-flip-vs-absolute-wf_vblank-interruptible: - shard-iclb: NOTRUN -> SKIP [fdo#109274] +2 * igt@kms_flip@flip-vs-expired-vblank-interruptible: - shard-glk: PASS -> FAIL [fdo#105363] * igt@kms_frontbuffer_tracking@fbc-1p-primscrn-indfb-plflip-blt: - shard-kbl: PASS -> DMESG-WARN [fdo#103558] / [fdo#105602] +2 * igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-cur-indfb-draw-blt: - shard-kbl: NOTRUN -> SKIP [fdo#109271] +14 * igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-indfb-draw-pwrite: - shard-iclb: PASS -> FAIL [fdo#109247] +12 * igt@kms_frontbuffer_tracking@fbcpsr-1p-pri-indfb-multidraw: - shard-iclb: PASS -> FAIL [fdo#103167] * igt@kms_frontbuffer_tracking@fbcpsr-rgb101010-draw-mmap-gtt: - shard-iclb: PASS -> FAIL [fdo#105682] / [fdo#109247] * igt@kms_frontbuffer_tracking@psr-2p-scndscrn-spr-indfb-draw-mmap-gtt: - shard-iclb: NOTRUN -> SKIP [fdo#109280] +4 * igt@kms_lease@atomic_implicit_crtc: - shard-apl: NOTRUN -> FAIL [fdo#110279] * igt@kms_lease@setcrtc_implicit_plane: - shard-apl: NOTRUN -> FAIL [fdo#110281] * igt@kms_pipe_crc_basic@hang-read-crc-pipe-f: - shard-glk: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +2 * igt@kms_plane@pixel-format-pipe-a-planes-source-clamping: - shard-glk: PASS -> SKIP [fdo#109271] * igt@kms_plane_alpha_blend@pipe-b-alpha-basic: - shard-apl: NOTRUN -> FAIL [fdo#108145] +5 * igt@kms_plane_scaling@pipe-b-scaler-with-clipping-clamping: - shard-glk: PASS -> SKIP [fdo#109271] / [fdo#109278] +1 * igt@kms_psr@primary_render: - shard-iclb: PASS -> FAIL [fdo#107383] / [fdo#110215] * igt@kms_psr@psr2_cursor_render: - shard-iclb: PASS -> SKIP [fdo#109441] +1 * igt@kms_setmode@basic: - shard-apl: NOTRUN -> FAIL [fdo#99912] - shard-kbl: PASS -> FAIL [fdo#99912] * igt@kms_tv_load_detect@load-detect: - shard-iclb: NOTRUN -> SKIP [fdo#109309] * igt@kms_vblank@pipe-a-ts-continuation-suspend: - shard-iclb: PASS -> FAIL [fdo#104894] +1 * igt@perf@polling: - shard-iclb: PASS -> FAIL [fdo#108587] * igt@prime_vgem@sync-bsd1: - shard-apl: NOTRUN -> SKIP [fdo#109271] +240 * igt@runner@aborted: - shard-iclb: NOTRUN -> FAIL [fdo#109593] #### Possible fixes #### * igt@gem_mmap_gtt@forked-big-copy-xy: - shard-iclb: TIMEOUT [fdo#109673] -> PASS * igt@gem_ppgtt@blt-vs-render-ctx0: - shard-iclb: INCOMPLETE [fdo#109801] -> PASS +1 * igt@gem_softpin@noreloc-s3: - shard-kbl: INCOMPLETE [fdo#103665] -> PASS * igt@i915_pm_rc6_residency@rc6-accuracy: - shard-snb: SKIP [fdo#109271] -> PASS * igt@i915_pm_rpm@system-suspend-execbuf: - shard-glk: DMESG-WARN [fdo#109513] -> PASS * igt@kms_cursor_crc@cursor-64x64-suspend: - shard-kbl: DMESG-WARN [fdo#108566] -> PASS * igt@kms_cursor_legacy@cursor-vs-flip-varying-size: - shard-iclb: FAIL [fdo#103355] -> PASS +2 * igt@kms_flip@2x-flip-vs-expired-vblank-interruptible: - shard-glk: FAIL [fdo#102887] -> PASS * igt@kms_flip@flip-vs-expired-vblank: - shard-glk: FAIL [fdo#102887] / [fdo#105363] -> PASS * igt@kms_flip@flip-vs-rmfb: - shard-iclb: INCOMPLETE [fdo#107713] -> PASS * igt@kms_flip@flip-vs-suspend: - shard-iclb: FAIL [fdo#103375] -> PASS * igt@kms_frontbuffer_tracking@fbc-rgb565-draw-pwrite: - shard-iclb: FAIL [fdo#103167] -> PASS +2 * igt@kms_frontbuffer_tracking@psr-rgb101010-draw-blt: - shard-iclb: FAIL [fdo#109247] -> PASS +18 * igt@kms_psr@cursor_plane_onoff: - shard-iclb: FAIL [fdo#107383] / [fdo#110215] -> PASS * igt@kms_psr@no_drrs: - shard-iclb: FAIL [fdo#108341] -> PASS * igt@kms_psr@psr2_cursor_plane_onoff: - shard-iclb: SKIP [fdo#109441] -> PASS +3 * igt@kms_rotation_crc@multiplane-rotation: - shard-kbl: FAIL [fdo#109016] -> PASS * igt@kms_vblank@pipe-a-ts-continuation-dpms-suspend: - shard-kbl: FAIL [fdo#104894] -> PASS * igt@perf@blocking: - shard-iclb: FAIL [fdo#108587] -> PASS * igt@perf_pmu@rc6-runtime-pm-long: - shard-iclb: FAIL [fdo#105010] -> PASS #### Warnings #### * igt@runner@aborted: - shard-glk: ( 2 FAIL ) [fdo#109373] / [k.org#202321] -> FAIL [fdo#109373] / [k.org#202321] [fdo#102887]: https://bugs.freedesktop.org/show_bug.cgi?id=102887 [fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167 [fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232 [fdo#103355]: https://bugs.freedesktop.org/show_bug.cgi?id=103355 [fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375 [fdo#103558]: https://bugs.freedesktop.org/show_bug.cgi?id=103558 [fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665 [fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927 [fdo#104894]: https://bugs.freedesktop.org/show_bug.cgi?id=104894 [fdo#105010]: https://bugs.freedesktop.org/show_bug.cgi?id=105010 [fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363 [fdo#105602]: https://bugs.freedesktop.org/show_bug.cgi?id=105602 [fdo#105682]: https://bugs.freedesktop.org/show_bug.cgi?id=105682 [fdo#107383]: https://bugs.freedesktop.org/show_bug.cgi?id=107383 [fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713 [fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145 [fdo#108341]: https://bugs.freedesktop.org/show_bug.cgi?id=108341 [fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566 [fdo#108587]: https://bugs.freedesktop.org/show_bug.cgi?id=108587 [fdo#109016]: https://bugs.freedesktop.org/show_bug.cgi?id=109016 [fdo#109247]: https://bugs.freedesktop.org/show_bug.cgi?id=109247 [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271 [fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274 [fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276 [fdo#109277]: https://bugs.freedesktop.org/show_bug.cgi?id=109277 [fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278 [fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280 [fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284 [fdo#109300]: https://bugs.freedesktop.org/show_bug.cgi?id=109300 [fdo#109305]: https://bugs.freedesktop.org/show_bug.cgi?id=109305 [fdo#109309]: https://bugs.freedesktop.org/show_bug.cgi?id=109309 [fdo#109373]: https://bugs.freedesktop.org/show_bug.cgi?id=109373 [fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441 [fdo#109506]: https://bugs.freedesktop.org/show_bug.cgi?id=109506 [fdo#109513]: https://bugs.freedesktop.org/show_bug.cgi?id=109513 [fdo#109593]: https://bugs.freedesktop.org/show_bug.cgi?id=109593 [fdo#109660]: https://bugs.freedesktop.org/show_bug.cgi?id=109660 [fdo#109673]: https://bugs.freedesktop.org/show_bug.cgi?id=109673 [fdo#109801]: https://bugs.freedesktop.org/show_bug.cgi?id=109801 [fdo#110215]: https://bugs.freedesktop.org/show_bug.cgi?id=110215 [fdo#110279]: https://bugs.freedesktop.org/show_bug.cgi?id=110279 [fdo#110281]: https://bugs.freedesktop.org/show_bug.cgi?id=110281 [fdo#110321]: https://bugs.freedesktop.org/show_bug.cgi?id=110321 [fdo#110336]: https://bugs.freedesktop.org/show_bug.cgi?id=110336 [fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912 [k.org#202321]: https://bugzilla.kernel.org/show_bug.cgi?id=202321 Participating hosts (10 -> 6) ------------------------------ Missing (4): pig-skl-6260u shard-skl pig-hsw-4770r pig-glk-j5005 Build changes ------------- * IGT: IGT_4934 -> IGTPW_2830 * Piglit: piglit_4509 -> None CI_DRM_5897: 7d07e025e78603d6270bc115fdb6c1efea6e66a5 @ git://anongit.freedesktop.org/gfx-ci/linux IGTPW_2830: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2830/ IGT_4934: dc4f45eb6874331daec870dc1e4cfc3ac5c49311 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit == Logs == For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2830/ _______________________________________________ igt-dev mailing list igt-dev@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/igt-dev ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-04-10 1:06 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-04-09 14:08 [igt-dev] [PATCH i-g-t v7 0/2] kms_atomic_transition improvements Stanislav Lisovskiy 2019-04-09 14:08 ` [igt-dev] [PATCH i-g-t v7 1/2] igt/tests/kms_atomic_transition: Skip transition, if no changes done Stanislav Lisovskiy 2019-04-09 14:08 ` [igt-dev] [PATCH i-g-t v7 2/2] igt/tests/kms_atomic_transition: Tolerate if can't have all planes Stanislav Lisovskiy 2019-04-09 15:17 ` Maarten Lankhorst 2019-04-09 15:36 ` [igt-dev] ✓ Fi.CI.BAT: success for kms_atomic_transition improvements (rev15) Patchwork 2019-04-10 1:06 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox