From: Anshuman Gupta <anshuman.gupta@intel.com>
To: igt-dev@lists.freedesktop.org
Cc: jyoti.r.yadav@intel.com
Subject: [igt-dev] [PATCH i-g-t v13 6/6] tests/i915/i915_pm_dc:Skip the DC6 test if BIOS has disabled PC8+
Date: Sun, 1 Sep 2019 19:50:01 +0530 [thread overview]
Message-ID: <20190901142001.11279-7-anshuman.gupta@intel.com> (raw)
In-Reply-To: <20190901142001.11279-1-anshuman.gupta@intel.com>
As DC6 requires platform to enter PC8 package C state.
It make sense to skip the DC6 igt-test, if BIOS configuration
has disabled PC8+ package C states.
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
tests/i915/i915_pm_dc.c | 55 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/tests/i915/i915_pm_dc.c b/tests/i915/i915_pm_dc.c
index 4c7e152a..0b29599b 100644
--- a/tests/i915/i915_pm_dc.c
+++ b/tests/i915/i915_pm_dc.c
@@ -26,19 +26,35 @@
#include "igt_sysfs.h"
#include "igt_psr.h"
#include <errno.h>
+#include <fcntl.h>
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include "intel_bufmgr.h"
#include "intel_io.h"
#include "limits.h"
+#include "igt_kmod.h"
/* DC State Flags */
#define CHECK_DC5 1
#define CHECK_DC6 2
+#define MSR_PKG_CST_CONFIG_CONTROL 0xE2
+/*
+ * Below PKG CST limit mask and PC8 bits are meant for
+ * HSW,BDW SKL,ICL and Goldmont Microarch and future platforms.
+ * Refer IA S/W developers manual vol3c part3 chapter:35
+ */
+#define PKG_CST_LIMIT_MASK 0xF
+#define PKG_CST_LIMIT_C8 0x6
+
+#define MSR_PC8_RES 0x630
+#define MSR_PC9_RES 0x631
+#define MSR_PC10_RES 0x632
+
typedef struct {
int drm_fd;
+ int msr_fd;
int debugfs_fd;
uint32_t devid;
igt_display_t display;
@@ -52,6 +68,34 @@ typedef struct {
static bool dc_state_wait_entry(int drm_fd, int dc_flag, int prev_dc_count);
static void check_dc_counter(int drm_fd, int dc_flag, uint32_t prev_dc_count);
+/* If the read fails, then the machine doesn't support PC8+ residencies. */
+static bool supports_pc8_plus_residencies(data_t *data)
+{
+ int rc;
+ uint64_t val;
+ int msr_fd = data->msr_fd;
+
+ rc = pread(msr_fd, &val, sizeof(uint64_t), MSR_PC8_RES);
+ if (rc != sizeof(val))
+ return false;
+ rc = pread(msr_fd, &val, sizeof(uint64_t), MSR_PC9_RES);
+ if (rc != sizeof(val))
+ return false;
+ rc = pread(msr_fd, &val, sizeof(uint64_t), MSR_PC10_RES);
+ if (rc != sizeof(val))
+ return false;
+
+ rc = pread(msr_fd, &val, sizeof(uint64_t), MSR_PKG_CST_CONFIG_CONTROL);
+ if (rc != sizeof(val))
+ return false;
+ if ((val & PKG_CST_LIMIT_MASK) < PKG_CST_LIMIT_C8) {
+ igt_info("PKG C-states limited below PC8 by the BIOS\n");
+ return false;
+ }
+
+ return true;
+}
+
static void setup_output(data_t *data)
{
igt_display_t *display = &data->display;
@@ -255,6 +299,12 @@ int main(int argc, char *argv[])
igt_require(has_runtime_pm);
igt_require(igt_pm_dmc_loaded(data.debugfs_fd));
igt_display_require(&data.display, data.drm_fd);
+ /* Make sure our Kernel supports MSR and the module is loaded */
+ igt_require(igt_kmod_load("msr", NULL) == 0);
+
+ data.msr_fd = open("/dev/cpu/0/msr", O_RDONLY);
+ igt_assert_f(data.msr_fd >= 0,
+ "Can't open /dev/cpu/0/msr.\n");
}
igt_subtest("dc5-psr") {
@@ -270,6 +320,8 @@ int main(int argc, char *argv[])
psr_enable(data.debugfs_fd, data.op_psr_mode);
igt_require_f(edp_psr_sink_support(&data),
"Sink does not support PSR\n");
+ igt_require_f(supports_pc8_plus_residencies(&data),
+ "PC8+ residencies not supported\n");
test_dc_state_psr(&data, CHECK_DC6);
}
@@ -278,11 +330,14 @@ int main(int argc, char *argv[])
}
igt_subtest("dc6-dpms") {
+ igt_require_f(supports_pc8_plus_residencies(&data),
+ "PC8+ residencies not supported\n");
test_dc_state_dpms(&data, CHECK_DC6);
}
igt_fixture {
close(data.debugfs_fd);
+ close(data.msr_fd);
display_fini(&data);
}
--
2.21.0
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2019-09-01 14:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-01 14:19 [igt-dev] [PATCH i-g-t v13 0/6] DC states igt tests patch series Anshuman Gupta
2019-09-01 14:19 ` [igt-dev] [PATCH i-g-t v13 1/6] lib/igt_pm: igt lib helper routines to support DC5/6 tests Anshuman Gupta
2019-09-03 14:32 ` Imre Deak
2019-09-01 14:19 ` [igt-dev] [PATCH i-g-t v13 3/6] tests/i915/i915_pm_dc: Added test for DC6 during PSR Anshuman Gupta
2019-09-01 14:19 ` [igt-dev] [PATCH i-g-t v13 4/6] tests/i915/i915_pm_dc: Added test for DC5 during DPMS Anshuman Gupta
2019-09-01 14:20 ` [igt-dev] [PATCH i-g-t v13 5/6] tests/i915/i915_pm_dc: Added test for DC6 " Anshuman Gupta
2019-09-01 14:20 ` Anshuman Gupta [this message]
2019-09-03 14:38 ` [igt-dev] [PATCH i-g-t v13 6/6] tests/i915/i915_pm_dc:Skip the DC6 test if BIOS has disabled PC8+ Imre Deak
2019-09-03 16:26 ` Anshuman Gupta
2019-09-01 14:49 ` [igt-dev] ✓ Fi.CI.BAT: success for DC states igt tests patch series (rev18) Patchwork
2019-09-01 20:28 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
[not found] ` <20190901142001.11279-3-anshuman.gupta@intel.com>
2019-09-03 14:34 ` [igt-dev] [PATCH i-g-t v13 2/6] tests/i915/i915_pm_dc: Added new test to verify Display C States Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190901142001.11279-7-anshuman.gupta@intel.com \
--to=anshuman.gupta@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=jyoti.r.yadav@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox