[igt-dev] [PATCH v3 0/2] tests/kms_chamelium: Capture on type-c

[igt-dev] [PATCH v3 0/2] tests/kms_chamelium: Capture on type-c

[Kunal Joshi]

Chamelium uses HPD pulses to signal the need for a receiver reset
using DPMS cycle.Some connectors (e.g. DP over TypeC) have limitations
and will receive just a single such pulse and discard the rest.
This lasts until we disable the mode completetly and only then reenable it.

Receiver reset is always required after we set a new mode, so let's disable
the mode (reset_state() does that) before we switch to a new mode.
With this we will get the HPD pulses reliably for each iteration over
all the supoprted modes.

v2: Correction in code flow (Arek)

v3: Modified commit message. (Arek)

Kunal Joshi (2):
  tests/kms_chamelium: Capture on type-c
  HAX: Run in BAT

 tests/intel-ci/fast-feedback.testlist |  45 ++++++++++-
 tests/kms_chamelium.c                 | 110 +++++++++++++++++---------
 2 files changed, 118 insertions(+), 37 deletions(-)

-- 
2.25.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] [PATCH v3 1/2] tests/kms_chamelium: Capture on type-c

[Kunal Joshi]

Chamelium uses HPD pulses to signal the need for a receiver reset
using DPMS cycle.Some connectors (e.g. DP over TypeC) have limitations
and will receive just a single such pulse and discard the rest.
This lasts until we disable the mode completetly and only then reenable it.

Receiver reset is always required after we set a new mode, so let's disable
the mode (reset_state() does that) before we switch to a new mode.
With this we will get the HPD pulses reliably for each iteration over
all the supoprted modes.

v2: Correction in code flow (Arek)

v3: Modified commit message. (Arek)

Cc: Hiler Arkadiusz <arkadiusz.hiler@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Issue: https://gitlab.freedesktop.org/drm/intel/issues/262
Suggested-by: Hiler Arkadiusz <arkadiusz.hiler@intel.com>
Signed-off-by: Kunal Joshi <kunal1.joshi@intel.com>
Reviewed-by: Hiler Arkadiusz <arkadiusz.hiler@intel.com>
---
 tests/kms_chamelium.c | 110 ++++++++++++++++++++++++++++--------------
 1 file changed, 74 insertions(+), 36 deletions(-)

diff --git a/tests/kms_chamelium.c b/tests/kms_chamelium.c
index 8b20bbbc..421a9006 100644
--- a/tests/kms_chamelium.c
+++ b/tests/kms_chamelium.c
@@ -823,34 +823,53 @@ static void test_display_all_modes(data_t *data, struct chamelium_port *port,
 				   uint32_t fourcc, enum chamelium_check check,
 				   int count)
 {
-	igt_output_t *output;
-	igt_plane_t *primary;
-	drmModeConnector *connector;
 	bool bridge;
-	int i;
-
-	reset_state(data, port);
-
-	output = prepare_output(data, port, TEST_EDID_BASE);
-	connector = chamelium_port_get_connector(data->chamelium, port, false);
-	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
-	igt_assert(primary);
-	igt_require(igt_plane_has_format_mod(primary, fourcc, LOCAL_DRM_FORMAT_MOD_NONE));
+	int i, count_modes;
 
 	if (check == CHAMELIUM_CHECK_ANALOG)
 		bridge = check_analog_bridge(data, port);
 
-	for (i = 0; i < connector->count_modes; i++) {
-		drmModeModeInfo *mode = &connector->modes[i];
+	i = 0;
+	do {
+		igt_output_t *output;
+		igt_plane_t *primary;
+		drmModeConnector *connector;
+		drmModeModeInfo *mode;
+
+		/*
+		 * let's reset state each mode so we will get the
+		 * HPD pulses realibably
+		 */
+		reset_state(data, port);
+
+		/*
+		 * modes may change due to mode pruining and link issues, so we
+		 * need to refresh the connector
+		 */
+		output = prepare_output(data, port, TEST_EDID_BASE);
+		connector = chamelium_port_get_connector(data->chamelium, port,
+							 false);
+		primary = igt_output_get_plane_type(output,
+						    DRM_PLANE_TYPE_PRIMARY);
+		igt_assert(primary);
+		igt_require(igt_plane_has_format_mod(primary, fourcc,
+			    LOCAL_DRM_FORMAT_MOD_NONE));
+
+		/* we may skip some modes due to above but that's ok */
+		count_modes = connector->count_modes;
+		if (i >= count_modes)
+			break;
+
+		mode = &connector->modes[i];
 
 		if (check == CHAMELIUM_CHECK_ANALOG && bridge &&
 		    prune_vga_mode(data, mode))
 			continue;
 
-		do_test_display(data, port, output, mode, fourcc, check, count);
-	}
-
-	drmModeFreeConnector(connector);
+		do_test_display(data, port, output, mode, fourcc, check,
+				count);
+		drmModeFreeConnector(connector);
+	} while (++i < count_modes);
 }
 
 static const char test_display_frame_dump_desc[] =
@@ -860,23 +879,43 @@ static const char test_display_frame_dump_desc[] =
 static void
 test_display_frame_dump(data_t *data, struct chamelium_port *port)
 {
-	igt_output_t *output;
-	igt_plane_t *primary;
-	struct igt_fb fb;
-	struct chamelium_frame_dump *frame;
-	drmModeModeInfo *mode;
-	drmModeConnector *connector;
-	int fb_id, i, j;
 
-	reset_state(data, port);
+	int i, count_modes;
 
-	output = prepare_output(data, port, TEST_EDID_BASE);
-	connector = chamelium_port_get_connector(data->chamelium, port, false);
-	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
-	igt_assert(primary);
+	i = 0;
+	do {
+		igt_output_t *output;
+		igt_plane_t *primary;
+		struct igt_fb fb;
+		struct chamelium_frame_dump *frame;
+		drmModeModeInfo *mode;
+		drmModeConnector *connector;
+		int fb_id, j;
+
+		/*
+		 * let's reset state each mode so we will get the
+		 * HPD pulses realibably
+		 */
+		reset_state(data, port);
+
+		/*
+		 * modes may change due to mode pruining and link issues, so we
+		 * need to refresh the connector
+		 */
+		output = prepare_output(data, port, TEST_EDID_BASE);
+		connector = chamelium_port_get_connector(data->chamelium, port,
+							 false);
+		primary = igt_output_get_plane_type(output,
+						    DRM_PLANE_TYPE_PRIMARY);
+		igt_assert(primary);
+
+		/* we may skip some modes due to above but that's ok */
+		count_modes = connector->count_modes;
+		if (i >= count_modes)
+			break;
 
-	for (i = 0; i < connector->count_modes; i++) {
 		mode = &connector->modes[i];
+
 		fb_id = igt_create_color_pattern_fb(data->drm_fd,
 						    mode->hdisplay, mode->vdisplay,
 						    DRM_FORMAT_XRGB8888,
@@ -889,16 +928,15 @@ test_display_frame_dump(data_t *data, struct chamelium_port *port)
 		igt_debug("Reading frame dumps from Chamelium...\n");
 		chamelium_capture(data->chamelium, port, 0, 0, 0, 0, 5);
 		for (j = 0; j < 5; j++) {
-			frame = chamelium_read_captured_frame(
-			    data->chamelium, j);
+			frame = chamelium_read_captured_frame(data->chamelium,
+							      j);
 			chamelium_assert_frame_eq(data->chamelium, frame, &fb);
 			chamelium_destroy_frame_dump(frame);
 		}
 
 		igt_remove_fb(data->drm_fd, &fb);
-	}
-
-	drmModeFreeConnector(connector);
+		drmModeFreeConnector(connector);
+	} while (++i < count_modes);
 }
 
 #define MODE_CLOCK_ACCURACY 0.05 /* 5% */
-- 
2.25.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] [PATCH v3 2/2] HAX: Run in BAT

[Kunal Joshi]

Bat run
---
 tests/intel-ci/fast-feedback.testlist | 45 ++++++++++++++++++++++++++-
 1 file changed, 44 insertions(+), 1 deletion(-)

diff --git a/tests/intel-ci/fast-feedback.testlist b/tests/intel-ci/fast-feedback.testlist
index 2ccad438..646003d9 100644
--- a/tests/intel-ci/fast-feedback.testlist
+++ b/tests/intel-ci/fast-feedback.testlist
@@ -84,15 +84,58 @@ igt@kms_addfb_basic@unused-modifier
 igt@kms_addfb_basic@unused-offsets
 igt@kms_addfb_basic@unused-pitches
 igt@kms_busy@basic
+igt@kms_chamelium@dp-hpd
 igt@kms_chamelium@dp-hpd-fast
+igt@kms_chamelium@dp-hpd-enable-disable-mode
+igt@kms_chamelium@dp-hpd-with-enabled-mode
 igt@kms_chamelium@dp-edid-read
+igt@kms_chamelium@dp-hpd-after-suspend
+igt@kms_chamelium@dp-hpd-after-hibernate
+igt@kms_chamelium@dp-hpd-storm
+igt@kms_chamelium@dp-hpd-storm-disable
+igt@kms_chamelium@dp-edid-change-during-suspend
+igt@kms_chamelium@dp-edid-change-during-hibernate
+igt@kms_chamelium@dp-crc-single
 igt@kms_chamelium@dp-crc-fast
+igt@kms_chamelium@dp-crc-multiple
+igt@kms_chamelium@dp-frame-dump
+igt@kms_chamelium@dp-mode-timings
+igt@kms_chamelium@dp-audio
+igt@kms_chamelium@dp-audio-edid
+igt@kms_chamelium@hdmi-hpd
 igt@kms_chamelium@hdmi-hpd-fast
+igt@kms_chamelium@hdmi-hpd-enable-disable-mode
+igt@kms_chamelium@hdmi-hpd-with-enabled-mode
 igt@kms_chamelium@hdmi-edid-read
+igt@kms_chamelium@hdmi-hpd-after-suspend
+igt@kms_chamelium@hdmi-hpd-after-hibernate
+igt@kms_chamelium@hdmi-hpd-storm
+igt@kms_chamelium@hdmi-hpd-storm-disable
+igt@kms_chamelium@hdmi-edid-change-during-suspend
+igt@kms_chamelium@hdmi-edid-change-during-hibernate
+igt@kms_chamelium@hdmi-crc-single
 igt@kms_chamelium@hdmi-crc-fast
+igt@kms_chamelium@hdmi-crc-multiple
+igt@kms_chamelium@hdmi-crc-nonplanar-formats
+igt@kms_chamelium@hdmi-crc-planes-random
+igt@kms_chamelium@hdmi-cmp-planar-formats
+igt@kms_chamelium@hdmi-cmp-planes-random
+igt@kms_chamelium@hdmi-frame-dump
+igt@kms_chamelium@hdmi-mode-timings
+igt@kms_chamelium@hdmi-audio
+igt@kms_chamelium@hdmi-audio-edid
+igt@kms_chamelium@hdmi-aspect-ratio
+igt@kms_chamelium@vga-hpd
 igt@kms_chamelium@vga-hpd-fast
+igt@kms_chamelium@vga-hpd-enable-disable-mode
+igt@kms_chamelium@vga-hpd-with-enabled-mode
 igt@kms_chamelium@vga-edid-read
-igt@kms_chamelium@common-hpd-after-suspend
+igt@kms_chamelium@vga-hpd-after-suspend
+igt@kms_chamelium@vga-hpd-after-hibernate
+igt@kms_chamelium@vga-hpd-without-ddc
+igt@kms_chamelium@vga-frame-dump
+common-hpd-after-suspend
+common-hpd-after-hibernate
 igt@kms_prop_blob@basic
 igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic
 igt@kms_cursor_legacy@basic-busy-flip-before-cursor-legacy
-- 
2.25.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] ✗ Fi.CI.BAT: failure for tests/kms_chamelium: Capture on type-c (rev3)

[Patchwork]

== Series Details ==

Series: tests/kms_chamelium: Capture on type-c (rev3)
URL   : https://patchwork.freedesktop.org/series/76004/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_8350 -> IGTPW_4501
====================================================

Summary
-------

  **FAILURE**

  Serious unknown changes coming with IGTPW_4501 absolutely need to be
  verified manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in IGTPW_4501, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4501/index.html

Possible new issues
-------------------

  Here are the unknown changes that may have been introduced in IGTPW_4501:

### IGT changes ###

#### Possible regressions ####

  * igt@kms_chamelium@dp-hpd-after-hibernate:
    - fi-icl-u2:          NOTRUN -> [FAIL][1] +1 similar issue
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4501/fi-icl-u2/igt@kms_chamelium@dp-hpd-after-hibernate.html

  
Known issues
------------

  Here are the changes found in IGTPW_4501 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@i915_selftest@live@execlists:
    - fi-tgl-y:           [PASS][2] -> [INCOMPLETE][3] ([i915#1662])
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8350/fi-tgl-y/igt@i915_selftest@live@execlists.html
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4501/fi-tgl-y/igt@i915_selftest@live@execlists.html

  
#### Warnings ####

  * igt@i915_pm_rpm@module-reload:
    - fi-kbl-x1275:       [FAIL][4] ([i915#62]) -> [SKIP][5] ([fdo#109271])
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8350/fi-kbl-x1275/igt@i915_pm_rpm@module-reload.html
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4501/fi-kbl-x1275/igt@i915_pm_rpm@module-reload.html

  
  [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
  [i915#1662]: https://gitlab.freedesktop.org/drm/intel/issues/1662
  [i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62


Participating hosts (48 -> 42)
------------------------------

  Additional (1): fi-icl-dsi 
  Missing    (7): fi-cml-u2 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-kbl-7500u fi-byt-clapper fi-bdw-samus 


Build changes
-------------

  * CI: CI-20190529 -> None
  * IGT: IGT_5606 -> IGTPW_4501

  CI-20190529: 20190529
  CI_DRM_8350: 018bab6d1c4ac37bff9306384383fab59750e140 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGTPW_4501: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4501/index.html
  IGT_5606: 678afb3954bec6227c8762756a0ad6d9946d49b2 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4501/index.html
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

Re: [igt-dev] ✗ Fi.CI.BAT: failure for tests/kms_chamelium: Capture on type-c (rev3)

[Kunal Joshi]

On 2020-04-23 at 06:58:00 +0000, Patchwork wrote:
> == Series Details ==
> 
> Series: tests/kms_chamelium: Capture on type-c (rev3)
> URL   : https://patchwork.freedesktop.org/series/76004/
> State : failure
> 
> == Summary ==
> 
> CI Bug Log - changes from CI_DRM_8350 -> IGTPW_4501
> ====================================================
> 
> Summary
> -------
> 
>   **FAILURE**
> 
>   Serious unknown changes coming with IGTPW_4501 absolutely need to be
>   verified manually.
>   
>   If you think the reported changes have nothing to do with the changes
>   introduced in IGTPW_4501, please notify your bug team to allow them
>   to document this new failure mode, which will reduce false positives in CI.
> 
>   External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4501/index.html
> 
> Possible new issues
> -------------------
> 
>   Here are the unknown changes that may have been introduced in IGTPW_4501:
> 
> ### IGT changes ###
> 
> #### Possible regressions ####
> 
>   * igt@kms_chamelium@dp-hpd-after-hibernate:
>     - fi-icl-u2:          NOTRUN -> [FAIL][1] +1 similar issue
>    [1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4501/fi-icl-u2/igt@kms_chamelium@dp-hpd-after-hibernate.html
> 
>   
> Known issues
> ------------
> 
>   Here are the changes found in IGTPW_4501 that come from known issues:
> 
> ### IGT changes ###
> 
> #### Issues hit ####
> 
>   * igt@i915_selftest@live@execlists:
>     - fi-tgl-y:           [PASS][2] -> [INCOMPLETE][3] ([i915#1662])
>    [2]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8350/fi-tgl-y/igt@i915_selftest@live@execlists.html
>    [3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4501/fi-tgl-y/igt@i915_selftest@live@execlists.html
> 
>   
> #### Warnings ####
> 
>   * igt@i915_pm_rpm@module-reload:
>     - fi-kbl-x1275:       [FAIL][4] ([i915#62]) -> [SKIP][5] ([fdo#109271])
>    [4]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8350/fi-kbl-x1275/igt@i915_pm_rpm@module-reload.html
>    [5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4501/fi-kbl-x1275/igt@i915_pm_rpm@module-reload.html
> 
>   
>   [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
>   [i915#1662]: https://gitlab.freedesktop.org/drm/intel/issues/1662
>   [i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62
> 
> 
> Participating hosts (48 -> 42)
> ------------------------------
> 
>   Additional (1): fi-icl-dsi 
>   Missing    (7): fi-cml-u2 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-kbl-7500u fi-byt-clapper fi-bdw-samus 
> 
> 
> Build changes
> -------------
> 
>   * CI: CI-20190529 -> None
>   * IGT: IGT_5606 -> IGTPW_4501
> 
>   CI-20190529: 20190529
>   CI_DRM_8350: 018bab6d1c4ac37bff9306384383fab59750e140 @ git://anongit.freedesktop.org/gfx-ci/linux
>   IGTPW_4501: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4501/index.html
>   IGT_5606: 678afb3954bec6227c8762756a0ad6d9946d49b2 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
> 
> == Logs ==
> 
> For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4501/index.html

Tests unrelated to kms_chamelium can be considered as noise.
Other than that failing of dp-hpd-after-hibernate is not
related to change.
dp-crc-single which is failing is part of the change but still
we do better as previously all tests which do chamelium_capture()
were failing.
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] ✗ Fi.CI.BAT: failure for tests/kms_chamelium: Capture on type-c (rev4)

[Patchwork]

== Series Details ==

Series: tests/kms_chamelium: Capture on type-c (rev4)
URL   : https://patchwork.freedesktop.org/series/76004/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_8351 -> IGTPW_4502
====================================================

Summary
-------

  **FAILURE**

  Serious unknown changes coming with IGTPW_4502 absolutely need to be
  verified manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in IGTPW_4502, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4502/index.html

Possible new issues
-------------------

  Here are the unknown changes that may have been introduced in IGTPW_4502:

### IGT changes ###

#### Possible regressions ####

  * igt@i915_selftest@live@execlists:
    - fi-cml-u2:          [PASS][1] -> [INCOMPLETE][2]
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8351/fi-cml-u2/igt@i915_selftest@live@execlists.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4502/fi-cml-u2/igt@i915_selftest@live@execlists.html

  * igt@kms_chamelium@dp-frame-dump:
    - fi-icl-u2:          NOTRUN -> [FAIL][3] +2 similar issues
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4502/fi-icl-u2/igt@kms_chamelium@dp-frame-dump.html

  
#### Suppressed ####

  The following results come from untrusted machines, tests, or statuses.
  They do not affect the overall result.

  * {igt@kms_chamelium@hdmi-hpd-with-enabled-mode}:
    - fi-kbl-7500u:       NOTRUN -> [DMESG-WARN][4]
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4502/fi-kbl-7500u/igt@kms_chamelium@hdmi-hpd-with-enabled-mode.html

  
Known issues
------------

  Here are the changes found in IGTPW_4502 that come from known issues:

### IGT changes ###

#### Possible fixes ####

  * igt@i915_selftest@live@gt_timelines:
    - fi-bwr-2160:        [INCOMPLETE][5] ([i915#489]) -> [PASS][6]
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_8351/fi-bwr-2160/igt@i915_selftest@live@gt_timelines.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4502/fi-bwr-2160/igt@i915_selftest@live@gt_timelines.html

  
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  [i915#489]: https://gitlab.freedesktop.org/drm/intel/issues/489


Participating hosts (50 -> 44)
------------------------------

  Missing    (6): fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-byt-clapper fi-bdw-samus 


Build changes
-------------

  * CI: CI-20190529 -> None
  * IGT: IGT_5608 -> IGTPW_4502

  CI-20190529: 20190529
  CI_DRM_8351: 63580ab8ee4dc3b1b824be6637085ac6b2c8ba6d @ git://anongit.freedesktop.org/gfx-ci/linux
  IGTPW_4502: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4502/index.html
  IGT_5608: e7bcaf1dd251d454706c7cd64282f531aec50183 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_4502/index.html
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev