Igt-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: Mika Kahola <mika.kahola@intel.com>
Cc: igt-dev@lists.freedesktop.org
Subject: Re: [igt-dev] [PATCH i-g-t v10 4/4] tests/kms_ccs: CCS Clear Color test
Date: Fri, 20 Nov 2020 13:52:45 +0200	[thread overview]
Message-ID: <20201120115245.GC1589431@ideak-desk.fi.intel.com> (raw)
In-Reply-To: <20201120093646.1340401-5-mika.kahola@intel.com>

On Fri, Nov 20, 2020 at 11:36:46AM +0200, Mika Kahola wrote:
> The patch proposes a method to test CCS with clear color
> capability.
> 
> The test paints a solid color on primary fb and a small sprite fb.
> These are cleared with fast clear feature. A crc is captured and
> compared against the reference.
> 
> v2: Modify _gen9_render_copyfunc to support fast clear (Matt)
>     Enable fast clear bit on 3D sequence (Matt)
>     Add helper function to figure out clear color modifier (Matt)
> v3: Remove unrelated line additions/removes
> v4: Fast clear with color (Imre)
> v5: Write raw 32-bit color values to register (Imre)
>     Require 32-bit color format
> v6: Rebase to use batchbuffer without libdrm dependency
> v7: Enable clear color (Nanley)
> v8: Various cleanups (Imre)
> v9: Splitting patch for smaller hunks (Imre)
> v10: Remove switch from CCS CC modifier check (Imre)
>      Color map conversion (Imre)
>      Separate function to check CCS CC plane (Imre)
>      Removed left-over comment (Imre)
>      Replace inte_bb_reset() with intel_bb_sync() and
>      intel_bb_destroy() when cleaning up (Imre)
>      Fix logic to test CCS clear color only with
>      XRGB8888 format (Imre)
>      Move fast clear to it's own function (Imre)
> 
> Signed-off-by: Mika Kahola <mika.kahola@intel.com>
> ---
>  tests/kms_ccs.c | 75 +++++++++++++++++++++++++++++++++++++++++++++----
>  1 file changed, 69 insertions(+), 6 deletions(-)
> 
> diff --git a/tests/kms_ccs.c b/tests/kms_ccs.c
> index 53abecce..8c2d7b3d 100644
> --- a/tests/kms_ccs.c
> +++ b/tests/kms_ccs.c
> @@ -120,6 +120,11 @@ static void addfb_init(struct igt_fb *fb, struct drm_mode_fb_cmd2 *f)
>  	}
>  }
>  
> +static bool is_ccs_cc_modifier(uint64_t modifier)
> +{
> +	return modifier == LOCAL_I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC;
> +}
> +
>  /*
>   * The CCS planes of compressed framebuffers contain non-zero bytes if the
>   * engine compressed effectively the framebuffer. The actual encoding of these
> @@ -155,7 +160,36 @@ static void check_ccs_plane(int drm_fd, igt_fb_t *fb, int plane)
>  		     plane, igt_fb_ccs_to_main_plane(fb, plane));
>  }
>  
> -static void check_all_ccs_planes(int drm_fd, igt_fb_t *fb)
> +static void check_ccs_cc_plane(int drm_fd, igt_fb_t *fb, int plane, const float *cc_color)
> +{
> +	union cc {
> +		float f;
> +		uint32_t d;
> +	} *cc_p;
> +	void *map;
> +	uint32_t native_color;
> +
> +	gem_set_domain(drm_fd, fb->gem_handle, I915_GEM_DOMAIN_CPU, 0);
> +
> +	map = gem_mmap__cpu(drm_fd, fb->gem_handle, 0, fb->size, PROT_READ);
> +	cc_p = map + fb->offsets[plane];
> +
> +	igt_assert(cc_color[0] == cc_p[0].f &&
> +		   cc_color[1] == cc_p[1].f &&
> +		   cc_color[2] == cc_p[2].f &&
> +		   cc_color[3] == cc_p[3].f);
> +
> +	native_color = (uint8_t)(cc_color[3] * 0xff) << 24 |
> +		       (uint8_t)(cc_color[0] * 0xff) << 16 |
> +		       (uint8_t)(cc_color[1] * 0xff) << 8 |
> +		       (uint8_t)(cc_color[2] * 0xff);
> +
> +	igt_assert(native_color == cc_p[4].d);
> +
> +	munmap(map, fb->size);
> +};
> +
> +static void check_all_ccs_planes(int drm_fd, igt_fb_t *fb, const float *cc_color)
>  {
>  	int i;
>  
> @@ -163,6 +197,8 @@ static void check_all_ccs_planes(int drm_fd, igt_fb_t *fb)
>  		if (igt_fb_is_ccs_plane(fb, i) &&
>  		    !igt_fb_is_gen12_ccs_cc_plane(fb, i))
>  			check_ccs_plane(drm_fd, fb, i);
> +		else if (igt_fb_is_gen12_ccs_cc_plane(fb, i))
> +			check_ccs_cc_plane(drm_fd, fb, i, cc_color);
>  	}
>  }
>  
> @@ -176,6 +212,24 @@ static int get_ccs_plane_index(uint32_t format)
>  	return index;
>  }
>  
> +static void fast_clear_fb(int drm_fd, struct igt_fb *fb, const float *cc_color)
> +{
> +	igt_render_clearfunc_t fast_clear = igt_get_render_clearfunc(intel_get_drm_devid(drm_fd));
> +	struct intel_bb *ibb = intel_bb_create(drm_fd, 4096);
> +	struct buf_ops *bops = buf_ops_create(drm_fd);
> +	struct intel_buf *dst = igt_fb_create_intel_buf(drm_fd, bops, fb, "fast clear dst");
> +
> +	gem_set_domain(drm_fd, fb->gem_handle,
> +		       I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT);
> +
> +	fast_clear(ibb, dst, 0, 0, fb->width, fb->height, cc_color);
> +
> +	intel_bb_sync(ibb);
> +	intel_bb_destroy(ibb);
> +	intel_buf_destroy(dst);
> +	buf_ops_destroy(bops);
> +}
> +
>  static void generate_fb(data_t *data, struct igt_fb *fb,
>  			int width, int height,
>  			enum test_fb_flags fb_flags)
> @@ -186,6 +240,7 @@ static void generate_fb(data_t *data, struct igt_fb *fb,
>  	cairo_t *cr;
>  	int index;
>  	int ret;
> +	const float cc_color[4] = {colors[0].r, colors[0].g, colors[0].b, 1.0};

this needs to match the reference FB color, which is different in the
sprite subtests: colors[!!data->plane]

>  
>  	/* Use either compressed or Y-tiled to test. However, given the lack of
>  	 * available bandwidth, we use linear for the primary plane when
> @@ -246,10 +301,14 @@ static void generate_fb(data_t *data, struct igt_fb *fb,
>  	if (!(data->flags & TEST_BAD_PIXEL_FORMAT)) {
>  		int c = !!data->plane;
>  
> -		cr = igt_get_cairo_ctx(data->drm_fd, fb);
> -		igt_paint_color(cr, 0, 0, width, height,
> -				colors[c].r, colors[c].g, colors[c].b);
> -		igt_put_cairo_ctx(cr);
> +		if (is_ccs_cc_modifier(modifier)) {
> +			fast_clear_fb(data->drm_fd, fb, cc_color);
> +		} else {
> +			cr = igt_get_cairo_ctx(data->drm_fd, fb);
> +			igt_paint_color(cr, 0, 0, width, height,
> +					colors[c].r, colors[c].g, colors[c].b);
> +					igt_put_cairo_ctx(cr);
> +		}
>  	}
>  
>  	ret = drmIoctl(data->drm_fd, LOCAL_DRM_IOCTL_MODE_ADDFB2, &f);
> @@ -261,7 +320,7 @@ static void generate_fb(data_t *data, struct igt_fb *fb,
>  		igt_assert_eq(ret, 0);
>  
>  	if (check_ccs_planes)
> -		check_all_ccs_planes(data->drm_fd, fb);
> +		check_all_ccs_planes(data->drm_fd, fb, cc_color);
>  
>  	fb->fb_id = f.fb_id;
>  }
> @@ -349,6 +408,10 @@ static bool try_config(data_t *data, enum test_fb_flags fb_flags,
>  	if (data->flags & TEST_BAD_ROTATION_90)
>  		igt_plane_set_rotation(primary, IGT_ROTATION_90);
>  
> +	if (is_ccs_cc_modifier(data->ccs_modifier)
> +	   && data->format != DRM_FORMAT_XRGB8888)
> +		return false;

this should be checked early after igt_plane_has_format_mod() to avoid the
overhead up to this point. Also codying style is && at the end of line.

With the above fixed, looks ok:
Reviewed-by: Imre Deak <imre.deak@intel.com>

> +
>  	ret = igt_display_try_commit2(display, commit);
>  	if (data->flags & TEST_BAD_ROTATION_90) {
>  		igt_assert_eq(ret, -EINVAL);
> -- 
> 2.25.1
> 
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

  reply	other threads:[~2020-11-20 11:52 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-20  9:36 [igt-dev] [PATCH i-g-t v10 0/4] tests/kms_ccs: CCS Clear Color test Mika Kahola
2020-11-20  9:36 ` [igt-dev] [PATCH i-g-t v10 1/4] tests/kms_ccs: Add debug information on format modifier Mika Kahola
2020-11-20  9:36 ` [igt-dev] [PATCH i-g-t v10 2/4] lib/rendercopy: Enable fast clear Mika Kahola
2020-11-20 11:43   ` Imre Deak
2020-11-20  9:36 ` [igt-dev] [PATCH i-g-t v10 3/4] lib/intel_aux_pgtable: Initialize aux pagetable for " Mika Kahola
2020-11-20 11:44   ` Imre Deak
2020-11-20  9:36 ` [igt-dev] [PATCH i-g-t v10 4/4] tests/kms_ccs: CCS Clear Color test Mika Kahola
2020-11-20 11:52   ` Imre Deak [this message]
2020-11-20 11:56     ` Kahola, Mika
2020-11-20 10:09 ` [igt-dev] ✓ Fi.CI.BAT: success for " Patchwork
2020-11-20 12:09 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201120115245.GC1589431@ideak-desk.fi.intel.com \
    --to=imre.deak@intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=mika.kahola@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox