From: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [V3 i-g-t 02/23] lib: Cache xe_device at driver open/close level
Date: Thu, 22 Jun 2023 12:24:01 +0530 [thread overview]
Message-ID: <20230622065422.2235134-3-bhanuprakash.modem@intel.com> (raw)
In-Reply-To: <20230622065422.2235134-1-bhanuprakash.modem@intel.com>
Instead of caching the xe_device struct at subtest level, cache
just after opening the driver. And remove from the cache just
before closing the driver.
V2: - Place the logic in correct helpers (Zbigniew)
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Kamil Konieczny <kamil.konieczny@linux.intel.com>
Reviewed-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
---
lib/drmtest.c | 24 +++++++++++++++++++++---
lib/igt_types.c | 6 ++++++
2 files changed, 27 insertions(+), 3 deletions(-)
diff --git a/lib/drmtest.c b/lib/drmtest.c
index a226ebd91..5cdb0196d 100644
--- a/lib/drmtest.c
+++ b/lib/drmtest.c
@@ -64,6 +64,7 @@
#include "intel_reg.h"
#include "ioctl_wrappers.h"
#include "igt_dummyload.h"
+#include "xe/xe_query.h"
/**
* SECTION:drmtest
@@ -497,9 +498,14 @@ int __drm_open_driver_another(int idx, int chipset)
fd = __open_driver("/dev/dri/card", 0, chipset, idx);
}
- if (fd >= 0)
+ if (fd >= 0) {
_set_opened_fd(idx, fd);
+ /* Cache xe_device struct. */
+ if (is_xe_device(fd))
+ xe_device_get(fd);
+ }
+
return fd;
}
@@ -523,6 +529,8 @@ int __drm_open_driver(int chipset)
int __drm_open_driver_render(int chipset)
{
+ int fd;
+
if (chipset != DRIVER_VGEM && igt_device_filter_count() > 0) {
struct igt_device_card card;
bool found;
@@ -532,10 +540,16 @@ int __drm_open_driver_render(int chipset)
if (!found || !strlen(card.render))
return -1;
- return __open_driver_exact(card.render, chipset);
+ fd = __open_driver_exact(card.render, chipset);
+ } else {
+ fd = __open_driver("/dev/dri/renderD", 128, chipset, 0);
}
- return __open_driver("/dev/dri/renderD", 128, chipset, 0);
+ /* Cache xe_device struct. */
+ if (fd >= 0 && is_xe_device(fd))
+ xe_device_get(fd);
+
+ return fd;
}
static int at_exit_drm_fd = -1;
@@ -677,6 +691,10 @@ int drm_close_driver(int fd)
return -1;
}
+ /* Remove xe_device from cache. */
+ if (is_xe_device(fd))
+ xe_device_put(fd);
+
return close(fd);
}
diff --git a/lib/igt_types.c b/lib/igt_types.c
index 392f30fca..d5d444889 100644
--- a/lib/igt_types.c
+++ b/lib/igt_types.c
@@ -5,13 +5,19 @@
#include <unistd.h>
+#include "drmtest.h"
#include "igt_types.h"
+#include "xe/xe_query.h"
void igt_cleanup_fd(volatile int *fd)
{
if (!fd || *fd < 0)
return;
+ /* Remove xe_device from cache. */
+ if (is_xe_device(*fd))
+ xe_device_put(*fd);
+
close(*fd);
*fd = -1;
}
--
2.40.0
next prev parent reply other threads:[~2023-06-22 7:00 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-22 6:53 [igt-dev] [V3 i-g-t 00/23] XE test cleanup to handle xe_device Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 01/23] lib: Interface to close the drm fd Bhanuprakash Modem
2023-06-22 6:54 ` Bhanuprakash Modem [this message]
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 03/23] lib/xe/xe_query: Add xe_config() interface Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 04/23] lib/igt_msm: Use drm_close_driver() to close the drm fd Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 05/23] tests/amdgpu: Close the fd before exit Bhanuprakash Modem
2023-06-22 7:22 ` Christian König
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 06/23] tests/i915: " Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 07/23] tests/kms: " Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 08/23] tests/nouveau_crc: " Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 09/23] tests/xe/xe_gpgpu_fill: " Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 10/23] tests/i915/kms_mmap_write_crc: Avoid closing the closed fd Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 11/23] tests: Use drm_close_driver() to close the drm fd Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 12/23] tests/amdgpu: " Bhanuprakash Modem
2023-06-22 7:22 ` Christian König
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 13/23] tests/chamelium: " Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 14/23] tests/panfrost: " Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 15/23] tests/v3d: " Bhanuprakash Modem
2023-06-22 11:55 ` Maira Canal
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 16/23] tests/vc4: " Bhanuprakash Modem
2023-06-22 11:56 ` Maira Canal
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 17/23] tests/vmwgfx: " Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 18/23] tests/kms: " Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 19/23] tests/xe: " Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 20/23] tests/i915: " Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 21/23] tests/xe/xe_debugfs: Use xe_config() helper to get the config Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 22/23] tests: Drop xe_device get/put from test level Bhanuprakash Modem
2023-06-22 6:54 ` [igt-dev] [V3 i-g-t 23/23] Revert "lib/igt_kms: Cache xe_device info for kms tests" Bhanuprakash Modem
2023-06-22 8:02 ` [igt-dev] ✗ Fi.CI.BAT: failure for XE test cleanup to handle xe_device (rev6) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230622065422.2235134-3-bhanuprakash.modem@intel.com \
--to=bhanuprakash.modem@intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox