* [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation
2023-11-30 13:20 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
@ 2023-11-30 13:20 ` Jeevan B
2023-12-01 5:06 ` B, Jeevan
0 siblings, 1 reply; 11+ messages in thread
From: Jeevan B @ 2023-11-30 13:20 UTC (permalink / raw)
To: igt-dev
From: Swati Sharma <swati2.sharma@intel.com>
Optimize documentation and update mega features accordingly.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
---
tests/intel/kms_psr.c | 215 +++++++++++++++---------------------------
1 file changed, 74 insertions(+), 141 deletions(-)
diff --git a/tests/intel/kms_psr.c b/tests/intel/kms_psr.c
index 05bdd7b98..31d6f779c 100644
--- a/tests/intel/kms_psr.c
+++ b/tests/intel/kms_psr.c
@@ -43,143 +43,93 @@
#include "xe/xe_query.h"
/**
- * SUBTEST: psr_basic
- * Description: Basic check for psr if it is detecting changes made in planes
- * Functionality: psr1
+ * SUBTEST: %s_basic
+ * Description: Basic check for %arg[1] if it is detecting changes made in planes
+ * Functionality: %arg[1]
*
- * SUBTEST: psr_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1]
- * Driver requirement: i915
- * Functionality: kms_core, plane, psr1
- *
- * arg[1]:
- *
- * @cursor: Cursor plane
- * @primary: Primary plane
- * @sprite: Sprite plane
- *
- * arg[2]:
+ * SUBTEST: %s_dpms
+ * Description: Check if %arg[1] is detecting changes when rendering operation
+ * is performed with dpms enabled or disabled
+ * Functionality: %arg[1], dpms
*
- * @mmap_cpu: MMAP CPU
- * @mmap_gtt: MMAP GTT
- */
-
-/**
- * SUBTEST: psr_sprite_plane_move
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on sprite planes
- * Functionality: plane, psr1
+ * SUBTEST: %s_no_drrs
+ * Description: Check if %arg[1] is detecting changes when drrs is disabled
+ * Functionality: %arg[1], drrs
*
- * SUBTEST: psr_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, psr1
+ * SUBTEST: %s_suspend
+ * Description: Check if %arg[1] is detecting changes when plane operation is
+ * performed with suspend resume cycles
+ * Functionality: %arg[1], suspend
*
* arg[1]:
*
- * @cursor: Cursor plane
- * @sprite: Sprite plane
- *
- * arg[2]:
- *
- * @blt: Blitter
- * @render: Render
- * @plane_onoff: Plane On off
+ * @psr: psr1
+ * @psr2: psr2
*/
/**
- * SUBTEST: psr_primary_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, psr1
+ * SUBTEST: %s_%s_%s
+ * Description: Check if %arg[1] is detecting memory mapping %arg[3] operations
+ * performed on %arg[2] planes
+ * Driver requirement: i915
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
- * @blt: Blitter
- * @render: Render
- */
-
-/**
- * SUBTEST: psr_dpms
- * Description: Check if psr is detecting changes when rendering operation is
- * performed with dpms enabled or disabled
- * Functionality: dpms, psr1
- *
- * SUBTEST: psr_no_drrs
- * Description: Check if psr is detecting changes when drrs is disabled
- * Functionality: drrs, psr1
- *
- * SUBTEST: psr_suspend
- * Description: Check if psr is detecting changes when plane operation
- * is performed with suspend resume cycles
- * Functionality: psr1, suspend
- *
- * SUBTEST: psr2_dpms
- * Description: Check if psr is detecting changes when rendering operation
- * is performed with dpms enabled or disabled
- * Functionality: dpms, psr2
- *
- * SUBTEST: psr2_no_drrs
- * Description: Check if psr is detecting changes when drrs is disabled
- * Functionality: drrs, psr2
- *
- * SUBTEST: psr2_suspend
- * Description: Check if psr is detecting changes when plane operation is
- * performed with suspend resume cycles
- * Functionality: psr2, suspend
- *
- * SUBTEST: psr2_basic
- * Description: Basic check for psr if it is detecting changes made in planes
- * Functionality: psr2
+ * @psr: psr1
+ * @psr2: psr2
*
- * SUBTEST: psr2_%s_%s
- * Description: Check if psr2 is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Driver requirement: i915
- * Functionality: kms_core, plane, psr2
- *
- * arg[1]:
+ * arg[2]:
*
* @cursor: Cursor plane
* @primary: Primary plane
* @sprite: Sprite plane
*
- * arg[2]:
+ * arg[3]:
*
* @mmap_cpu: MMAP CPU
* @mmap_gtt: MMAP GTT
*/
/**
- * SUBTEST: psr2_primary_page_flip
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: plane, psr2
+ * SUBTEST: %s_primary_page_flip
+ * Description: Check if %arg[1] is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: %arg[1], plane
*
- * SUBTEST: psr2_primary_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: kms_core, plane, psr2
+ * SUBTEST: %s_primary_%s
+ * Description: Check if %arg[1] is detecting rendering operations %arg[2]
+ * when performed on primary plane
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
+ * @psr: psr1
+ * @psr2: psr2
+ *
+ * arg[2]:
+ *
* @blt: Blitter
* @render: Render
*/
/**
- * SUBTEST: psr2_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, psr2
+ * SUBTEST: %s_%s_%s
+ * Description: Check if %arg[1] is detecting rendering and plane
+ * operations %arg[3] performed on %arg[2] planes
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
+ * @psr: psr1
+ * @psr2: psr2
+ *
+ * arg[2]:
+ *
* @cursor: Cursor plane
* @sprite: Sprite plane
*
- * arg[2]:
+ * arg[3]:
*
* @blt: Blitter
* @render: Render
@@ -188,36 +138,36 @@
*/
/**
+ * SUBTEST: pr_basic
+ * Description: Basic check for pr if it is detecting changes made in planes
+ * Functionality: pr
+ * Mega feature: DP2.0
+ *
* SUBTEST: pr_dpms
* Description: Check if pr is detecting changes when rendering operation
* is performed with dpms enabled or disabled
- * Functionality: dpms, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, dpms
+ * Mega feature: DP2.0
*
* SUBTEST: pr_no_drrs
* Description: Check if pr is detecting changes when drrs is disabled
- * Functionality: drrs, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, drrs
+ * Mega feature: DP2.0
*
* SUBTEST: pr_suspend
* Description: Check if pr is detecting changes when plane operation is
* performed with suspend resume cycles
* Functionality: pr, suspend
- * Mega feature: Panel Replay
- *
- * SUBTEST: pr_basic
- * Description: Basic check for pr if it is detecting changes made in planes
- * Functionality: pr
- * Mega feature: Panel Replay
+ * Mega feature: DP2.0
*/
/**
* SUBTEST: pr_%s_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
+ * Description: Check if pr is detecting memory mapping %arg[2] operations
+ * performed on %arg[1] planes
* Driver requirement: i915
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -233,16 +183,16 @@
/**
* SUBTEST: pr_primary_page_flip
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* SUBTEST: pr_primary_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting rendering operations %arg[1]
+ * when performed on primary plane
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -252,10 +202,10 @@
/**
* SUBTEST: pr_%s_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting rendering and plane
+ * operations %arg[2] performed on %arg[1] planes
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -270,23 +220,6 @@
* @plane_move: Move plane position
*/
-/**
- * SUBTEST: psr_cursor_plane_move
- * Description: Check if psr is detecting the plane operations performed on
- * cursor planes
- * Functionality: psr1
- *
- * SUBTEST: psr_primary_page_flip
- * Description: Check if psr is detecting page-flipping operations performed
- * on primary planes
- * Functionality: psr1
- *
- * SUBTEST: psr_sprite_plane_onoff
- * Description: Check if psr is detecting the plane operations performed on
- * sprite planes
- * Functionality: psr1
- */
-
enum operations {
PAGE_FLIP,
MMAP_GTT,
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation
2023-11-30 13:20 ` [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation Jeevan B
@ 2023-12-01 5:06 ` B, Jeevan
0 siblings, 0 replies; 11+ messages in thread
From: B, Jeevan @ 2023-12-01 5:06 UTC (permalink / raw)
To: B, Jeevan, igt-dev@lists.freedesktop.org
LGTM
Reviewed-by: Jeevan B <jeevan.b@intel.com>
> -----Original Message-----
> From: igt-dev <igt-dev-bounces@lists.freedesktop.org> On Behalf Of Jeevan B
> Sent: Thursday, November 30, 2023 6:51 PM
> To: igt-dev@lists.freedesktop.org
> Subject: [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation
>
> From: Swati Sharma <swati2.sharma@intel.com>
>
> Optimize documentation and update mega features accordingly.
>
> Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
> ---
> tests/intel/kms_psr.c | 215 +++++++++++++++---------------------------
> 1 file changed, 74 insertions(+), 141 deletions(-)
>
> diff --git a/tests/intel/kms_psr.c b/tests/intel/kms_psr.c index
> 05bdd7b98..31d6f779c 100644
> --- a/tests/intel/kms_psr.c
> +++ b/tests/intel/kms_psr.c
> @@ -43,143 +43,93 @@
> #include "xe/xe_query.h"
>
> /**
> - * SUBTEST: psr_basic
> - * Description: Basic check for psr if it is detecting changes made in planes
> - * Functionality: psr1
> + * SUBTEST: %s_basic
> + * Description: Basic check for %arg[1] if it is detecting changes made
> + in planes
> + * Functionality: %arg[1]
> *
> - * SUBTEST: psr_%s_%s
> - * Description: Check if psr is detecting memory mapping, rendering and plane
> - * operations performed on %arg[1]
> - * Driver requirement: i915
> - * Functionality: kms_core, plane, psr1
> - *
> - * arg[1]:
> - *
> - * @cursor: Cursor plane
> - * @primary: Primary plane
> - * @sprite: Sprite plane
> - *
> - * arg[2]:
> + * SUBTEST: %s_dpms
> + * Description: Check if %arg[1] is detecting changes when rendering operation
> + * is performed with dpms enabled or disabled
> + * Functionality: %arg[1], dpms
> *
> - * @mmap_cpu: MMAP CPU
> - * @mmap_gtt: MMAP GTT
> - */
> -
> -/**
> - * SUBTEST: psr_sprite_plane_move
> - * Description: Check if psr is detecting memory mapping, rendering and plane
> - * operations performed on sprite planes
> - * Functionality: plane, psr1
> + * SUBTEST: %s_no_drrs
> + * Description: Check if %arg[1] is detecting changes when drrs is
> + disabled
> + * Functionality: %arg[1], drrs
> *
> - * SUBTEST: psr_%s_%s
> - * Description: Check if psr is detecting memory mapping, rendering and plane
> - * operations performed on %arg[1] planes
> - * Functionality: kms_core, plane, psr1
> + * SUBTEST: %s_suspend
> + * Description: Check if %arg[1] is detecting changes when plane operation is
> + * performed with suspend resume cycles
> + * Functionality: %arg[1], suspend
> *
> * arg[1]:
> *
> - * @cursor: Cursor plane
> - * @sprite: Sprite plane
> - *
> - * arg[2]:
> - *
> - * @blt: Blitter
> - * @render: Render
> - * @plane_onoff: Plane On off
> + * @psr: psr1
> + * @psr2: psr2
> */
>
> /**
> - * SUBTEST: psr_primary_%s
> - * Description: Check if psr is detecting memory mapping, rendering and plane
> - * operations performed on %arg[1] planes
> - * Functionality: kms_core, psr1
> + * SUBTEST: %s_%s_%s
> + * Description: Check if %arg[1] is detecting memory mapping %arg[3]
> operations
> + * performed on %arg[2] planes
> + * Driver requirement: i915
> + * Functionality: %arg[1], plane
> *
> * arg[1]:
> *
> - * @blt: Blitter
> - * @render: Render
> - */
> -
> -/**
> - * SUBTEST: psr_dpms
> - * Description: Check if psr is detecting changes when rendering operation is
> - * performed with dpms enabled or disabled
> - * Functionality: dpms, psr1
> - *
> - * SUBTEST: psr_no_drrs
> - * Description: Check if psr is detecting changes when drrs is disabled
> - * Functionality: drrs, psr1
> - *
> - * SUBTEST: psr_suspend
> - * Description: Check if psr is detecting changes when plane operation
> - * is performed with suspend resume cycles
> - * Functionality: psr1, suspend
> - *
> - * SUBTEST: psr2_dpms
> - * Description: Check if psr is detecting changes when rendering operation
> - * is performed with dpms enabled or disabled
> - * Functionality: dpms, psr2
> - *
> - * SUBTEST: psr2_no_drrs
> - * Description: Check if psr is detecting changes when drrs is disabled
> - * Functionality: drrs, psr2
> - *
> - * SUBTEST: psr2_suspend
> - * Description: Check if psr is detecting changes when plane operation is
> - * performed with suspend resume cycles
> - * Functionality: psr2, suspend
> - *
> - * SUBTEST: psr2_basic
> - * Description: Basic check for psr if it is detecting changes made in planes
> - * Functionality: psr2
> + * @psr: psr1
> + * @psr2: psr2
> *
> - * SUBTEST: psr2_%s_%s
> - * Description: Check if psr2 is detecting memory mapping, rendering and plane
> - * operations performed on %arg[1] planes
> - * Driver requirement: i915
> - * Functionality: kms_core, plane, psr2
> - *
> - * arg[1]:
> + * arg[2]:
> *
> * @cursor: Cursor plane
> * @primary: Primary plane
> * @sprite: Sprite plane
> *
> - * arg[2]:
> + * arg[3]:
> *
> * @mmap_cpu: MMAP CPU
> * @mmap_gtt: MMAP GTT
> */
>
> /**
> - * SUBTEST: psr2_primary_page_flip
> - * Description: Check if psr is detecting memory mapping, rendering and plane
> - * operations performed on primary planes
> - * Functionality: plane, psr2
> + * SUBTEST: %s_primary_page_flip
> + * Description: Check if %arg[1] is detecting page-flipping operation
> + * performed on primary plane
> + * Functionality: %arg[1], plane
> *
> - * SUBTEST: psr2_primary_%s
> - * Description: Check if psr is detecting memory mapping, rendering and plane
> - * operations performed on primary planes
> - * Functionality: kms_core, plane, psr2
> + * SUBTEST: %s_primary_%s
> + * Description: Check if %arg[1] is detecting rendering operations %arg[2]
> + * when performed on primary plane
> + * Functionality: %arg[1], plane
> *
> * arg[1]:
> *
> + * @psr: psr1
> + * @psr2: psr2
> + *
> + * arg[2]:
> + *
> * @blt: Blitter
> * @render: Render
> */
>
> /**
> - * SUBTEST: psr2_%s_%s
> - * Description: Check if psr is detecting memory mapping, rendering and plane
> - * operations performed on %arg[1] planes
> - * Functionality: kms_core, plane, psr2
> + * SUBTEST: %s_%s_%s
> + * Description: Check if %arg[1] is detecting rendering and plane
> + * operations %arg[3] performed on %arg[2] planes
> + * Functionality: %arg[1], plane
> *
> * arg[1]:
> *
> + * @psr: psr1
> + * @psr2: psr2
> + *
> + * arg[2]:
> + *
> * @cursor: Cursor plane
> * @sprite: Sprite plane
> *
> - * arg[2]:
> + * arg[3]:
> *
> * @blt: Blitter
> * @render: Render
> @@ -188,36 +138,36 @@
> */
>
> /**
> + * SUBTEST: pr_basic
> + * Description: Basic check for pr if it is detecting changes made in
> + planes
> + * Functionality: pr
> + * Mega feature: DP2.0
> + *
> * SUBTEST: pr_dpms
> * Description: Check if pr is detecting changes when rendering operation
> * is performed with dpms enabled or disabled
> - * Functionality: dpms, pr
> - * Mega feature: Panel Replay
> + * Functionality: pr, dpms
> + * Mega feature: DP2.0
> *
> * SUBTEST: pr_no_drrs
> * Description: Check if pr is detecting changes when drrs is disabled
> - * Functionality: drrs, pr
> - * Mega feature: Panel Replay
> + * Functionality: pr, drrs
> + * Mega feature: DP2.0
> *
> * SUBTEST: pr_suspend
> * Description: Check if pr is detecting changes when plane operation is
> * performed with suspend resume cycles
> * Functionality: pr, suspend
> - * Mega feature: Panel Replay
> - *
> - * SUBTEST: pr_basic
> - * Description: Basic check for pr if it is detecting changes made in planes
> - * Functionality: pr
> - * Mega feature: Panel Replay
> + * Mega feature: DP2.0
> */
>
> /**
> * SUBTEST: pr_%s_%s
> - * Description: Check if pr is detecting memory mapping, rendering and plane
> - * operations performed on %arg[1] planes
> + * Description: Check if pr is detecting memory mapping %arg[2] operations
> + * performed on %arg[1] planes
> * Driver requirement: i915
> - * Functionality: kms_core, plane, pr
> - * Mega feature: Panel Replay
> + * Functionality: pr, plane
> + * Mega feature: DP2.0
> *
> * arg[1]:
> *
> @@ -233,16 +183,16 @@
>
> /**
> * SUBTEST: pr_primary_page_flip
> - * Description: Check if pr is detecting memory mapping, rendering and plane
> - * operations performed on primary planes
> - * Functionality: plane, pr
> - * Mega feature: Panel Replay
> + * Description: Check if pr is detecting page-flipping operation
> + * performed on primary plane
> + * Functionality: pr, plane
> + * Mega feature: DP2.0
> *
> * SUBTEST: pr_primary_%s
> - * Description: Check if pr is detecting memory mapping, rendering and plane
> - * operations performed on primary planes
> - * Functionality: kms_core, plane, pr
> - * Mega feature: Panel Replay
> + * Description: Check if pr is detecting rendering operations %arg[1]
> + * when performed on primary plane
> + * Functionality: pr, plane
> + * Mega feature: DP2.0
> *
> * arg[1]:
> *
> @@ -252,10 +202,10 @@
>
> /**
> * SUBTEST: pr_%s_%s
> - * Description: Check if pr is detecting memory mapping, rendering and plane
> - * operations performed on %arg[1] planes
> - * Functionality: kms_core, plane, pr
> - * Mega feature: Panel Replay
> + * Description: Check if pr is detecting rendering and plane
> + * operations %arg[2] performed on %arg[1] planes
> + * Functionality: pr, plane
> + * Mega feature: DP2.0
> *
> * arg[1]:
> *
> @@ -270,23 +220,6 @@
> * @plane_move: Move plane position
> */
>
> -/**
> - * SUBTEST: psr_cursor_plane_move
> - * Description: Check if psr is detecting the plane operations performed on
> - * cursor planes
> - * Functionality: psr1
> - *
> - * SUBTEST: psr_primary_page_flip
> - * Description: Check if psr is detecting page-flipping operations performed
> - * on primary planes
> - * Functionality: psr1
> - *
> - * SUBTEST: psr_sprite_plane_onoff
> - * Description: Check if psr is detecting the plane operations performed on
> - * sprite planes
> - * Functionality: psr1
> - */
> -
> enum operations {
> PAGE_FLIP,
> MMAP_GTT,
> --
> 2.25.1
^ permalink raw reply [flat|nested] 11+ messages in thread
* [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation
2023-12-01 11:22 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
@ 2023-12-01 11:22 ` Jeevan B
0 siblings, 0 replies; 11+ messages in thread
From: Jeevan B @ 2023-12-01 11:22 UTC (permalink / raw)
To: igt-dev
From: Swati Sharma <swati2.sharma@intel.com>
Optimize documentation and update mega features accordingly.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jeevan B <jeevan.b@intel.com>
---
tests/intel/kms_psr.c | 215 +++++++++++++++---------------------------
1 file changed, 74 insertions(+), 141 deletions(-)
diff --git a/tests/intel/kms_psr.c b/tests/intel/kms_psr.c
index 05bdd7b98..31d6f779c 100644
--- a/tests/intel/kms_psr.c
+++ b/tests/intel/kms_psr.c
@@ -43,143 +43,93 @@
#include "xe/xe_query.h"
/**
- * SUBTEST: psr_basic
- * Description: Basic check for psr if it is detecting changes made in planes
- * Functionality: psr1
+ * SUBTEST: %s_basic
+ * Description: Basic check for %arg[1] if it is detecting changes made in planes
+ * Functionality: %arg[1]
*
- * SUBTEST: psr_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1]
- * Driver requirement: i915
- * Functionality: kms_core, plane, psr1
- *
- * arg[1]:
- *
- * @cursor: Cursor plane
- * @primary: Primary plane
- * @sprite: Sprite plane
- *
- * arg[2]:
+ * SUBTEST: %s_dpms
+ * Description: Check if %arg[1] is detecting changes when rendering operation
+ * is performed with dpms enabled or disabled
+ * Functionality: %arg[1], dpms
*
- * @mmap_cpu: MMAP CPU
- * @mmap_gtt: MMAP GTT
- */
-
-/**
- * SUBTEST: psr_sprite_plane_move
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on sprite planes
- * Functionality: plane, psr1
+ * SUBTEST: %s_no_drrs
+ * Description: Check if %arg[1] is detecting changes when drrs is disabled
+ * Functionality: %arg[1], drrs
*
- * SUBTEST: psr_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, psr1
+ * SUBTEST: %s_suspend
+ * Description: Check if %arg[1] is detecting changes when plane operation is
+ * performed with suspend resume cycles
+ * Functionality: %arg[1], suspend
*
* arg[1]:
*
- * @cursor: Cursor plane
- * @sprite: Sprite plane
- *
- * arg[2]:
- *
- * @blt: Blitter
- * @render: Render
- * @plane_onoff: Plane On off
+ * @psr: psr1
+ * @psr2: psr2
*/
/**
- * SUBTEST: psr_primary_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, psr1
+ * SUBTEST: %s_%s_%s
+ * Description: Check if %arg[1] is detecting memory mapping %arg[3] operations
+ * performed on %arg[2] planes
+ * Driver requirement: i915
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
- * @blt: Blitter
- * @render: Render
- */
-
-/**
- * SUBTEST: psr_dpms
- * Description: Check if psr is detecting changes when rendering operation is
- * performed with dpms enabled or disabled
- * Functionality: dpms, psr1
- *
- * SUBTEST: psr_no_drrs
- * Description: Check if psr is detecting changes when drrs is disabled
- * Functionality: drrs, psr1
- *
- * SUBTEST: psr_suspend
- * Description: Check if psr is detecting changes when plane operation
- * is performed with suspend resume cycles
- * Functionality: psr1, suspend
- *
- * SUBTEST: psr2_dpms
- * Description: Check if psr is detecting changes when rendering operation
- * is performed with dpms enabled or disabled
- * Functionality: dpms, psr2
- *
- * SUBTEST: psr2_no_drrs
- * Description: Check if psr is detecting changes when drrs is disabled
- * Functionality: drrs, psr2
- *
- * SUBTEST: psr2_suspend
- * Description: Check if psr is detecting changes when plane operation is
- * performed with suspend resume cycles
- * Functionality: psr2, suspend
- *
- * SUBTEST: psr2_basic
- * Description: Basic check for psr if it is detecting changes made in planes
- * Functionality: psr2
+ * @psr: psr1
+ * @psr2: psr2
*
- * SUBTEST: psr2_%s_%s
- * Description: Check if psr2 is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Driver requirement: i915
- * Functionality: kms_core, plane, psr2
- *
- * arg[1]:
+ * arg[2]:
*
* @cursor: Cursor plane
* @primary: Primary plane
* @sprite: Sprite plane
*
- * arg[2]:
+ * arg[3]:
*
* @mmap_cpu: MMAP CPU
* @mmap_gtt: MMAP GTT
*/
/**
- * SUBTEST: psr2_primary_page_flip
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: plane, psr2
+ * SUBTEST: %s_primary_page_flip
+ * Description: Check if %arg[1] is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: %arg[1], plane
*
- * SUBTEST: psr2_primary_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: kms_core, plane, psr2
+ * SUBTEST: %s_primary_%s
+ * Description: Check if %arg[1] is detecting rendering operations %arg[2]
+ * when performed on primary plane
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
+ * @psr: psr1
+ * @psr2: psr2
+ *
+ * arg[2]:
+ *
* @blt: Blitter
* @render: Render
*/
/**
- * SUBTEST: psr2_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, psr2
+ * SUBTEST: %s_%s_%s
+ * Description: Check if %arg[1] is detecting rendering and plane
+ * operations %arg[3] performed on %arg[2] planes
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
+ * @psr: psr1
+ * @psr2: psr2
+ *
+ * arg[2]:
+ *
* @cursor: Cursor plane
* @sprite: Sprite plane
*
- * arg[2]:
+ * arg[3]:
*
* @blt: Blitter
* @render: Render
@@ -188,36 +138,36 @@
*/
/**
+ * SUBTEST: pr_basic
+ * Description: Basic check for pr if it is detecting changes made in planes
+ * Functionality: pr
+ * Mega feature: DP2.0
+ *
* SUBTEST: pr_dpms
* Description: Check if pr is detecting changes when rendering operation
* is performed with dpms enabled or disabled
- * Functionality: dpms, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, dpms
+ * Mega feature: DP2.0
*
* SUBTEST: pr_no_drrs
* Description: Check if pr is detecting changes when drrs is disabled
- * Functionality: drrs, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, drrs
+ * Mega feature: DP2.0
*
* SUBTEST: pr_suspend
* Description: Check if pr is detecting changes when plane operation is
* performed with suspend resume cycles
* Functionality: pr, suspend
- * Mega feature: Panel Replay
- *
- * SUBTEST: pr_basic
- * Description: Basic check for pr if it is detecting changes made in planes
- * Functionality: pr
- * Mega feature: Panel Replay
+ * Mega feature: DP2.0
*/
/**
* SUBTEST: pr_%s_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
+ * Description: Check if pr is detecting memory mapping %arg[2] operations
+ * performed on %arg[1] planes
* Driver requirement: i915
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -233,16 +183,16 @@
/**
* SUBTEST: pr_primary_page_flip
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* SUBTEST: pr_primary_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting rendering operations %arg[1]
+ * when performed on primary plane
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -252,10 +202,10 @@
/**
* SUBTEST: pr_%s_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting rendering and plane
+ * operations %arg[2] performed on %arg[1] planes
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -270,23 +220,6 @@
* @plane_move: Move plane position
*/
-/**
- * SUBTEST: psr_cursor_plane_move
- * Description: Check if psr is detecting the plane operations performed on
- * cursor planes
- * Functionality: psr1
- *
- * SUBTEST: psr_primary_page_flip
- * Description: Check if psr is detecting page-flipping operations performed
- * on primary planes
- * Functionality: psr1
- *
- * SUBTEST: psr_sprite_plane_onoff
- * Description: Check if psr is detecting the plane operations performed on
- * sprite planes
- * Functionality: psr1
- */
-
enum operations {
PAGE_FLIP,
MMAP_GTT,
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support
@ 2023-12-01 12:47 Jeevan B
2023-12-01 12:47 ` [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation Jeevan B
` (3 more replies)
0 siblings, 4 replies; 11+ messages in thread
From: Jeevan B @ 2023-12-01 12:47 UTC (permalink / raw)
To: igt-dev
fix kms_psr documentation, subtest naming and add fbc support/test
for kms_psr, kms_psr2_sf.
v2: rebase
Signed-off-by: Jeevan B <jeevan.b@intel.com>
Jeevan B (3):
tests/intel/kms_psr: fix subtest naming
tests/intel/kms_psr: Add FBC support to PSR/PSR2/PR tests
tests/intel/kms_psr2_sf: Add FBC support to PSR2 tests
Swati Sharma (1):
tests/intel/kms_psr: fix documentation
lib/igt_psr.h | 5 +
tests/intel/kms_psr.c | 569 ++++++++++++++++++----------------
tests/intel/kms_psr2_sf.c | 623 +++++++++++++++++++++-----------------
3 files changed, 662 insertions(+), 535 deletions(-)
--
2.25.1
^ permalink raw reply [flat|nested] 11+ messages in thread
* [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation
2023-12-01 12:47 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
@ 2023-12-01 12:47 ` Jeevan B
2023-12-01 12:47 ` [igt-dev] [PATCH i-g-t 2/4] tests/intel/kms_psr: fix subtest naming Jeevan B
` (2 subsequent siblings)
3 siblings, 0 replies; 11+ messages in thread
From: Jeevan B @ 2023-12-01 12:47 UTC (permalink / raw)
To: igt-dev
From: Swati Sharma <swati2.sharma@intel.com>
Optimize documentation and update mega features accordingly.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jeevan B <jeevan.b@intel.com>
---
tests/intel/kms_psr.c | 215 +++++++++++++++---------------------------
1 file changed, 74 insertions(+), 141 deletions(-)
diff --git a/tests/intel/kms_psr.c b/tests/intel/kms_psr.c
index 05bdd7b98..31d6f779c 100644
--- a/tests/intel/kms_psr.c
+++ b/tests/intel/kms_psr.c
@@ -43,143 +43,93 @@
#include "xe/xe_query.h"
/**
- * SUBTEST: psr_basic
- * Description: Basic check for psr if it is detecting changes made in planes
- * Functionality: psr1
+ * SUBTEST: %s_basic
+ * Description: Basic check for %arg[1] if it is detecting changes made in planes
+ * Functionality: %arg[1]
*
- * SUBTEST: psr_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1]
- * Driver requirement: i915
- * Functionality: kms_core, plane, psr1
- *
- * arg[1]:
- *
- * @cursor: Cursor plane
- * @primary: Primary plane
- * @sprite: Sprite plane
- *
- * arg[2]:
+ * SUBTEST: %s_dpms
+ * Description: Check if %arg[1] is detecting changes when rendering operation
+ * is performed with dpms enabled or disabled
+ * Functionality: %arg[1], dpms
*
- * @mmap_cpu: MMAP CPU
- * @mmap_gtt: MMAP GTT
- */
-
-/**
- * SUBTEST: psr_sprite_plane_move
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on sprite planes
- * Functionality: plane, psr1
+ * SUBTEST: %s_no_drrs
+ * Description: Check if %arg[1] is detecting changes when drrs is disabled
+ * Functionality: %arg[1], drrs
*
- * SUBTEST: psr_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, psr1
+ * SUBTEST: %s_suspend
+ * Description: Check if %arg[1] is detecting changes when plane operation is
+ * performed with suspend resume cycles
+ * Functionality: %arg[1], suspend
*
* arg[1]:
*
- * @cursor: Cursor plane
- * @sprite: Sprite plane
- *
- * arg[2]:
- *
- * @blt: Blitter
- * @render: Render
- * @plane_onoff: Plane On off
+ * @psr: psr1
+ * @psr2: psr2
*/
/**
- * SUBTEST: psr_primary_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, psr1
+ * SUBTEST: %s_%s_%s
+ * Description: Check if %arg[1] is detecting memory mapping %arg[3] operations
+ * performed on %arg[2] planes
+ * Driver requirement: i915
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
- * @blt: Blitter
- * @render: Render
- */
-
-/**
- * SUBTEST: psr_dpms
- * Description: Check if psr is detecting changes when rendering operation is
- * performed with dpms enabled or disabled
- * Functionality: dpms, psr1
- *
- * SUBTEST: psr_no_drrs
- * Description: Check if psr is detecting changes when drrs is disabled
- * Functionality: drrs, psr1
- *
- * SUBTEST: psr_suspend
- * Description: Check if psr is detecting changes when plane operation
- * is performed with suspend resume cycles
- * Functionality: psr1, suspend
- *
- * SUBTEST: psr2_dpms
- * Description: Check if psr is detecting changes when rendering operation
- * is performed with dpms enabled or disabled
- * Functionality: dpms, psr2
- *
- * SUBTEST: psr2_no_drrs
- * Description: Check if psr is detecting changes when drrs is disabled
- * Functionality: drrs, psr2
- *
- * SUBTEST: psr2_suspend
- * Description: Check if psr is detecting changes when plane operation is
- * performed with suspend resume cycles
- * Functionality: psr2, suspend
- *
- * SUBTEST: psr2_basic
- * Description: Basic check for psr if it is detecting changes made in planes
- * Functionality: psr2
+ * @psr: psr1
+ * @psr2: psr2
*
- * SUBTEST: psr2_%s_%s
- * Description: Check if psr2 is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Driver requirement: i915
- * Functionality: kms_core, plane, psr2
- *
- * arg[1]:
+ * arg[2]:
*
* @cursor: Cursor plane
* @primary: Primary plane
* @sprite: Sprite plane
*
- * arg[2]:
+ * arg[3]:
*
* @mmap_cpu: MMAP CPU
* @mmap_gtt: MMAP GTT
*/
/**
- * SUBTEST: psr2_primary_page_flip
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: plane, psr2
+ * SUBTEST: %s_primary_page_flip
+ * Description: Check if %arg[1] is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: %arg[1], plane
*
- * SUBTEST: psr2_primary_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: kms_core, plane, psr2
+ * SUBTEST: %s_primary_%s
+ * Description: Check if %arg[1] is detecting rendering operations %arg[2]
+ * when performed on primary plane
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
+ * @psr: psr1
+ * @psr2: psr2
+ *
+ * arg[2]:
+ *
* @blt: Blitter
* @render: Render
*/
/**
- * SUBTEST: psr2_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, psr2
+ * SUBTEST: %s_%s_%s
+ * Description: Check if %arg[1] is detecting rendering and plane
+ * operations %arg[3] performed on %arg[2] planes
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
+ * @psr: psr1
+ * @psr2: psr2
+ *
+ * arg[2]:
+ *
* @cursor: Cursor plane
* @sprite: Sprite plane
*
- * arg[2]:
+ * arg[3]:
*
* @blt: Blitter
* @render: Render
@@ -188,36 +138,36 @@
*/
/**
+ * SUBTEST: pr_basic
+ * Description: Basic check for pr if it is detecting changes made in planes
+ * Functionality: pr
+ * Mega feature: DP2.0
+ *
* SUBTEST: pr_dpms
* Description: Check if pr is detecting changes when rendering operation
* is performed with dpms enabled or disabled
- * Functionality: dpms, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, dpms
+ * Mega feature: DP2.0
*
* SUBTEST: pr_no_drrs
* Description: Check if pr is detecting changes when drrs is disabled
- * Functionality: drrs, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, drrs
+ * Mega feature: DP2.0
*
* SUBTEST: pr_suspend
* Description: Check if pr is detecting changes when plane operation is
* performed with suspend resume cycles
* Functionality: pr, suspend
- * Mega feature: Panel Replay
- *
- * SUBTEST: pr_basic
- * Description: Basic check for pr if it is detecting changes made in planes
- * Functionality: pr
- * Mega feature: Panel Replay
+ * Mega feature: DP2.0
*/
/**
* SUBTEST: pr_%s_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
+ * Description: Check if pr is detecting memory mapping %arg[2] operations
+ * performed on %arg[1] planes
* Driver requirement: i915
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -233,16 +183,16 @@
/**
* SUBTEST: pr_primary_page_flip
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* SUBTEST: pr_primary_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting rendering operations %arg[1]
+ * when performed on primary plane
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -252,10 +202,10 @@
/**
* SUBTEST: pr_%s_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting rendering and plane
+ * operations %arg[2] performed on %arg[1] planes
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -270,23 +220,6 @@
* @plane_move: Move plane position
*/
-/**
- * SUBTEST: psr_cursor_plane_move
- * Description: Check if psr is detecting the plane operations performed on
- * cursor planes
- * Functionality: psr1
- *
- * SUBTEST: psr_primary_page_flip
- * Description: Check if psr is detecting page-flipping operations performed
- * on primary planes
- * Functionality: psr1
- *
- * SUBTEST: psr_sprite_plane_onoff
- * Description: Check if psr is detecting the plane operations performed on
- * sprite planes
- * Functionality: psr1
- */
-
enum operations {
PAGE_FLIP,
MMAP_GTT,
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [igt-dev] [PATCH i-g-t 2/4] tests/intel/kms_psr: fix subtest naming
2023-12-01 12:47 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
2023-12-01 12:47 ` [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation Jeevan B
@ 2023-12-01 12:47 ` Jeevan B
2023-12-01 12:47 ` [igt-dev] [PATCH i-g-t 3/4] tests/intel/kms_psr: Add FBC support to PSR/PSR2/PR tests Jeevan B
2023-12-01 12:47 ` [igt-dev] [PATCH i-g-t 4/4] tests/intel/kms_psr2_sf: Add FBC support to PSR2 tests Jeevan B
3 siblings, 0 replies; 11+ messages in thread
From: Jeevan B @ 2023-12-01 12:47 UTC (permalink / raw)
To: igt-dev
update subtest naming from sub_test to sub-test.
Signed-off-by: Jeevan B <jeevan.b@intel.com>
---
tests/intel/kms_psr.c | 72 +++++++++++++++++++++----------------------
1 file changed, 36 insertions(+), 36 deletions(-)
diff --git a/tests/intel/kms_psr.c b/tests/intel/kms_psr.c
index 31d6f779c..aea8b0b3f 100644
--- a/tests/intel/kms_psr.c
+++ b/tests/intel/kms_psr.c
@@ -43,20 +43,20 @@
#include "xe/xe_query.h"
/**
- * SUBTEST: %s_basic
+ * SUBTEST: %s-basic
* Description: Basic check for %arg[1] if it is detecting changes made in planes
* Functionality: %arg[1]
*
- * SUBTEST: %s_dpms
+ * SUBTEST: %s-dpms
* Description: Check if %arg[1] is detecting changes when rendering operation
* is performed with dpms enabled or disabled
* Functionality: %arg[1], dpms
*
- * SUBTEST: %s_no_drrs
+ * SUBTEST: %s-no-drrs
* Description: Check if %arg[1] is detecting changes when drrs is disabled
* Functionality: %arg[1], drrs
*
- * SUBTEST: %s_suspend
+ * SUBTEST: %s-suspend
* Description: Check if %arg[1] is detecting changes when plane operation is
* performed with suspend resume cycles
* Functionality: %arg[1], suspend
@@ -68,7 +68,7 @@
*/
/**
- * SUBTEST: %s_%s_%s
+ * SUBTEST: %s-%s-%s
* Description: Check if %arg[1] is detecting memory mapping %arg[3] operations
* performed on %arg[2] planes
* Driver requirement: i915
@@ -87,17 +87,17 @@
*
* arg[3]:
*
- * @mmap_cpu: MMAP CPU
- * @mmap_gtt: MMAP GTT
+ * @mmap-cpu: MMAP CPU
+ * @mmap-gtt: MMAP GTT
*/
/**
- * SUBTEST: %s_primary_page_flip
+ * SUBTEST: %s-primary-page-flip
* Description: Check if %arg[1] is detecting page-flipping operation
* performed on primary plane
* Functionality: %arg[1], plane
*
- * SUBTEST: %s_primary_%s
+ * SUBTEST: %s-primary-%s
* Description: Check if %arg[1] is detecting rendering operations %arg[2]
* when performed on primary plane
* Functionality: %arg[1], plane
@@ -114,7 +114,7 @@
*/
/**
- * SUBTEST: %s_%s_%s
+ * SUBTEST: %s-%s-%s
* Description: Check if %arg[1] is detecting rendering and plane
* operations %arg[3] performed on %arg[2] planes
* Functionality: %arg[1], plane
@@ -133,28 +133,28 @@
*
* @blt: Blitter
* @render: Render
- * @plane_onoff: Plane On off
- * @plane_move: Move plane position
+ * @plane-onoff: Plane On off
+ * @plane-move: Move plane position
*/
/**
- * SUBTEST: pr_basic
+ * SUBTEST: pr-basic
* Description: Basic check for pr if it is detecting changes made in planes
* Functionality: pr
* Mega feature: DP2.0
*
- * SUBTEST: pr_dpms
+ * SUBTEST: pr-dpms
* Description: Check if pr is detecting changes when rendering operation
* is performed with dpms enabled or disabled
* Functionality: pr, dpms
* Mega feature: DP2.0
*
- * SUBTEST: pr_no_drrs
+ * SUBTEST: pr-no-drrs
* Description: Check if pr is detecting changes when drrs is disabled
* Functionality: pr, drrs
* Mega feature: DP2.0
*
- * SUBTEST: pr_suspend
+ * SUBTEST: pr-suspend
* Description: Check if pr is detecting changes when plane operation is
* performed with suspend resume cycles
* Functionality: pr, suspend
@@ -162,7 +162,7 @@
*/
/**
- * SUBTEST: pr_%s_%s
+ * SUBTEST: pr-%s-%s
* Description: Check if pr is detecting memory mapping %arg[2] operations
* performed on %arg[1] planes
* Driver requirement: i915
@@ -177,18 +177,18 @@
*
* arg[2]:
*
- * @mmap_cpu: MMAP CPU
- * @mmap_gtt: MMAP GTT
+ * @mmap-cpu: MMAP CPU
+ * @mmap-gtt: MMAP GTT
*/
/**
- * SUBTEST: pr_primary_page_flip
+ * SUBTEST: pr-primary-page-flip
* Description: Check if pr is detecting page-flipping operation
* performed on primary plane
* Functionality: pr, plane
* Mega feature: DP2.0
*
- * SUBTEST: pr_primary_%s
+ * SUBTEST: pr-primary-%s
* Description: Check if pr is detecting rendering operations %arg[1]
* when performed on primary plane
* Functionality: pr, plane
@@ -201,7 +201,7 @@
*/
/**
- * SUBTEST: pr_%s_%s
+ * SUBTEST: pr-%s-%s
* Description: Check if pr is detecting rendering and plane
* operations %arg[2] performed on %arg[1] planes
* Functionality: pr, plane
@@ -216,8 +216,8 @@
*
* @blt: Blitter
* @render: Render
- * @plane_onoff: Plane On off
- * @plane_move: Move plane position
+ * @plane-onoff: Plane On off
+ * @plane-move: Move plane position
*/
enum operations {
@@ -233,13 +233,13 @@ enum operations {
static const char *op_str(enum operations op)
{
static const char * const name[] = {
- [PAGE_FLIP] = "page_flip",
- [MMAP_GTT] = "mmap_gtt",
- [MMAP_CPU] = "mmap_cpu",
+ [PAGE_FLIP] = "page-flip",
+ [MMAP_GTT] = "mmap-gtt",
+ [MMAP_CPU] = "mmap-cpu",
[BLT] = "blt",
[RENDER] = "render",
- [PLANE_MOVE] = "plane_move",
- [PLANE_ONOFF] = "plane_onoff",
+ [PLANE_MOVE] = "plane-move",
+ [PLANE_ONOFF] = "plane-onoff",
};
return name[op];
@@ -682,9 +682,9 @@ igt_main
int z;
enum operations op;
const char *append_subtest_name[3] = {
- "psr_",
- "psr2_",
- "pr_"
+ "psr-",
+ "psr2-",
+ "pr-"
};
int modes[] = {PSR_MODE_1, PSR_MODE_2, PR_MODE};
igt_output_t *output;
@@ -719,7 +719,7 @@ igt_main
}
igt_describe("Check if psr is detecting changes when drrs is disabled");
- igt_subtest_with_dynamic_f("%sno_drrs", append_subtest_name[z]) {
+ igt_subtest_with_dynamic_f("%sno-drrs", append_subtest_name[z]) {
for_each_connected_output(&data.display, output) {
if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
data.op_psr_mode, output))
@@ -738,7 +738,7 @@ igt_main
for (op = PAGE_FLIP; op <= RENDER; op++) {
igt_describe("Check if psr is detecting page-flipping,memory mapping and "
"rendering operations performed on primary planes");
- igt_subtest_with_dynamic_f("%sprimary_%s",
+ igt_subtest_with_dynamic_f("%sprimary-%s",
append_subtest_name[z],
op_str(op)) {
igt_skip_on(is_xe_device(data.drm_fd) &&
@@ -763,7 +763,7 @@ igt_main
for (op = MMAP_GTT; op <= PLANE_ONOFF; op++) {
igt_describe("Check if psr is detecting memory mapping,rendering "
"and plane operations performed on sprite planes");
- igt_subtest_with_dynamic_f("%ssprite_%s",
+ igt_subtest_with_dynamic_f("%ssprite-%s",
append_subtest_name[z],
op_str(op)) {
igt_skip_on(is_xe_device(data.drm_fd) &&
@@ -786,7 +786,7 @@ igt_main
igt_describe("Check if psr is detecting memory mapping, rendering "
"and plane operations performed on cursor planes");
- igt_subtest_with_dynamic_f("%scursor_%s",
+ igt_subtest_with_dynamic_f("%scursor-%s",
append_subtest_name[z],
op_str(op)) {
igt_skip_on(is_xe_device(data.drm_fd) &&
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [igt-dev] [PATCH i-g-t 3/4] tests/intel/kms_psr: Add FBC support to PSR/PSR2/PR tests
2023-12-01 12:47 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
2023-12-01 12:47 ` [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation Jeevan B
2023-12-01 12:47 ` [igt-dev] [PATCH i-g-t 2/4] tests/intel/kms_psr: fix subtest naming Jeevan B
@ 2023-12-01 12:47 ` Jeevan B
2023-12-01 12:47 ` [igt-dev] [PATCH i-g-t 4/4] tests/intel/kms_psr2_sf: Add FBC support to PSR2 tests Jeevan B
3 siblings, 0 replies; 11+ messages in thread
From: Jeevan B @ 2023-12-01 12:47 UTC (permalink / raw)
To: igt-dev
For LunarLake (intel_display_ver 20), FBC can be enabled along with
PSR/PSR2/PR, thereby adding FBC checks to validate this scenario.
Signed-off-by: Jeevan B <jeevan.b@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
---
lib/igt_psr.h | 5 +
tests/intel/kms_psr.c | 318 ++++++++++++++++++++++++++++--------------
2 files changed, 219 insertions(+), 104 deletions(-)
diff --git a/lib/igt_psr.h b/lib/igt_psr.h
index a30330e6c..36711c0d4 100644
--- a/lib/igt_psr.h
+++ b/lib/igt_psr.h
@@ -40,6 +40,11 @@ enum psr_mode {
PSR_DISABLED,
};
+enum fbc_mode {
+ FBC_DISABLED,
+ FBC_ENABLED,
+};
+
bool psr_disabled_check(int debugfs_fd);
bool psr2_selective_fetch_check(int debugfs_fd);
bool psr_wait_entry(int debugfs_fd, enum psr_mode mode, igt_output_t *output);
diff --git a/tests/intel/kms_psr.c b/tests/intel/kms_psr.c
index aea8b0b3f..fa5333f9a 100644
--- a/tests/intel/kms_psr.c
+++ b/tests/intel/kms_psr.c
@@ -31,6 +31,7 @@
* Test category: functionality test
*/
+#include "i915/intel_fbc.h"
#include "igt.h"
#include "igt_sysfs.h"
#include "igt_psr.h"
@@ -47,24 +48,42 @@
* Description: Basic check for %arg[1] if it is detecting changes made in planes
* Functionality: %arg[1]
*
+ * SUBTEST: fbc-%s-basic
+ * Description: Basic check for fbc with %arg[1] if it is detecting changes made in planes
+ * Functionality: %arg[1], fbc
+ *
* SUBTEST: %s-dpms
* Description: Check if %arg[1] is detecting changes when rendering operation
* is performed with dpms enabled or disabled
* Functionality: %arg[1], dpms
*
+ * SUBTEST: fbc-%s-dpms
+ * Description: Check if fbc with %arg[1] is detecting changes when rendering operation
+ * is performed with dpms enabled or disabled
+ * Functionality: %arg[1], dpms, fbc
+ *
* SUBTEST: %s-no-drrs
* Description: Check if %arg[1] is detecting changes when drrs is disabled
* Functionality: %arg[1], drrs
*
+ * SUBTEST: fbc-%s-no-drrs
+ * Description: Check if fbc with %arg[1] is detecting changes when drrs is disabled
+ * Functionality: %arg[1], drrs, fbc
+ *
* SUBTEST: %s-suspend
* Description: Check if %arg[1] is detecting changes when plane operation is
* performed with suspend resume cycles
* Functionality: %arg[1], suspend
*
+ * SUBTEST: fbc-%s-suspend
+ * Description: Check if fbc with %arg[1] is detecting changes when plane operation is
+ * performed with suspend resume cycles
+ * Functionality: %arg[1], suspend, fbc
+ *
* arg[1]:
*
- * @psr: psr1
- * @psr2: psr2
+ * @psr: psr1
+ * @psr2: psr2
*/
/**
@@ -74,6 +93,12 @@
* Driver requirement: i915
* Functionality: %arg[1], plane
*
+ * SUBTEST: fbc-%s-%s-%s
+ * Description: Check if fbc with %arg[1] is detecting memory mapping %arg[3] operations
+ * performed on %arg[2] planes
+ * Driver requirement: i915
+ * Functionality: %arg[1], plane, fbc
+ *
* arg[1]:
*
* @psr: psr1
@@ -97,11 +122,21 @@
* performed on primary plane
* Functionality: %arg[1], plane
*
+ * SUBTEST: fbc-%s-primary-page-flip
+ * Description: Check if fbc with %arg[1] is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: %arg[1], plane, fbc
+ *
* SUBTEST: %s-primary-%s
* Description: Check if %arg[1] is detecting rendering operations %arg[2]
* when performed on primary plane
* Functionality: %arg[1], plane
*
+ * SUBTEST: fbc-%s-primary-%s
+ * Description: Check if %arg[1] is detecting rendering operations %arg[2]
+ * when performed on primary plane
+ * Functionality: %arg[1], plane, fbc
+ *
* arg[1]:
*
* @psr: psr1
@@ -119,6 +154,11 @@
* operations %arg[3] performed on %arg[2] planes
* Functionality: %arg[1], plane
*
+ * SUBTEST: fbc-%s-%s-%s
+ * Description: Check if fbc with %arg[1] is detecting rendering and plane
+ * operations %arg[3] performed on %arg[2] planes
+ * Functionality: %arg[1], plane, fbc
+ *
* arg[1]:
*
* @psr: psr1
@@ -143,22 +183,44 @@
* Functionality: pr
* Mega feature: DP2.0
*
+ * SUBTEST: fbc-pr-basic
+ * Description: Basic check for fbc with pr if it is detecting changes made in planes
+ * Functionality: pr, fbc
+ * Mega feature: DP2.0
+ *
* SUBTEST: pr-dpms
* Description: Check if pr is detecting changes when rendering operation
* is performed with dpms enabled or disabled
* Functionality: pr, dpms
* Mega feature: DP2.0
*
+ * SUBTEST: fbc-pr-dpms
+ * Description: Check if fbc with pr is detecting changes when rendering operation
+ * is performed with dpms enabled or disabled
+ * Functionality: pr, dpms, fbc
+ * Mega feature: DP2.0
+ *
* SUBTEST: pr-no-drrs
* Description: Check if pr is detecting changes when drrs is disabled
* Functionality: pr, drrs
* Mega feature: DP2.0
*
+ * SUBTEST: fbc-pr-no-drrs
+ * Description: Check if fbc with pr is detecting changes when drrs is disabled
+ * Functionality: pr, drrs, fbc
+ * Mega feature: DP2.0
+ *
* SUBTEST: pr-suspend
* Description: Check if pr is detecting changes when plane operation is
* performed with suspend resume cycles
* Functionality: pr, suspend
* Mega feature: DP2.0
+ *
+ * SUBTEST: fbc-pr-suspend
+ * Description: Check if fbc with pr is detecting changes when plane operation is
+ * performed with suspend resume cycles
+ * Functionality: pr, suspend, fbc
+ * Mega feature: DP2.0
*/
/**
@@ -169,6 +231,13 @@
* Functionality: pr, plane
* Mega feature: DP2.0
*
+ * SUBTEST: fbc-pr-%s-%s
+ * Description: Check if fbc with pr is detecting memory mapping %arg[2] operations
+ * performed on %arg[1] planes
+ * Driver requirement: i915
+ * Functionality: pr, plane, fbc
+ * Mega feature: DP2.0
+ *
* arg[1]:
*
* @cursor: Cursor plane
@@ -188,12 +257,24 @@
* Functionality: pr, plane
* Mega feature: DP2.0
*
+ * SUBTEST: fbc-pr-primary-page-flip
+ * Description: Check if fbc with pr is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: pr, plane, fbc
+ * Mega feature: DP2.0
+ *
* SUBTEST: pr-primary-%s
* Description: Check if pr is detecting rendering operations %arg[1]
* when performed on primary plane
* Functionality: pr, plane
* Mega feature: DP2.0
*
+ * SUBTEST: fbc-pr-primary-%s
+ * Description: Check if fbc with pr is detecting rendering operations %arg[1]
+ * when performed on primary plane
+ * Functionality: pr, plane, fbc
+ * Mega feature: DP2.0
+ *
* arg[1]:
*
* @blt: Blitter
@@ -207,6 +288,12 @@
* Functionality: pr, plane
* Mega feature: DP2.0
*
+ * SUBTEST: fbc-pr-%s-%s
+ * Description: Check if fbc with pr is detecting rendering and plane
+ * operations %arg[2] performed on %arg[1] planes
+ * Functionality: pr, plane, fbc
+ * Mega feature: DP2.0
+ *
* arg[1]:
*
* @cursor: Cursor plane
@@ -251,6 +338,7 @@ typedef struct {
enum operations op;
int test_plane_id;
enum psr_mode op_psr_mode;
+ enum fbc_mode op_fbc_mode;
uint32_t devid;
uint32_t crtc_id;
igt_display_t display;
@@ -261,6 +349,7 @@ typedef struct {
int mod_stride;
drmModeModeInfo *mode;
igt_output_t *output;
+ bool fbc_flag;
} data_t;
static void create_cursor_fb(data_t *data)
@@ -659,6 +748,10 @@ static void test_setup(data_t *data)
psr_enable_if_enabled(data);
setup_test_plane(data, data->test_plane_id);
if (psr_wait_entry_if_enabled(data)) {
+ if (data->fbc_flag == true && data->op_fbc_mode == FBC_ENABLED)
+ igt_assert_f(intel_fbc_wait_until_enabled(data->drm_fd,
+ pipe),
+ "FBC still disabled");
psr_entered = true;
break;
}
@@ -679,14 +772,20 @@ data_t data = {};
igt_main
{
- int z;
+ int z, y;
enum operations op;
+ enum pipe pipe;
const char *append_subtest_name[3] = {
"psr-",
"psr2-",
"pr-"
};
+ const char *append_fbc_subtest[2] = {
+ "",
+ "fbc-"
+ };
int modes[] = {PSR_MODE_1, PSR_MODE_2, PR_MODE};
+ int fbc_status[] = {FBC_DISABLED, FBC_ENABLED};
igt_output_t *output;
igt_fixture {
@@ -697,52 +796,38 @@ igt_main
data.bops = buf_ops_create(data.drm_fd);
igt_display_require(&data.display, data.drm_fd);
igt_require_f(output_supports_psr(&data), "Sink does not support PSR/PSR2/PR\n");
+ if ((intel_display_ver(intel_get_drm_devid(data.drm_fd) == 20)) &&
+ (intel_fbc_supported_on_chipset(data.drm_fd, pipe))) {
+ data.fbc_flag = true;
+ }
}
- for (z = 0; z < ARRAY_SIZE(modes); z++) {
- data.op_psr_mode = modes[z];
-
- igt_describe("Basic check for psr if it is detecting changes made in planes");
- igt_subtest_with_dynamic_f("%sbasic", append_subtest_name[z]) {
- for_each_connected_output(&data.display, output) {
- if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
- data.op_psr_mode, output))
- continue;
- igt_display_reset(&data.display);
- data.output = output;
- igt_dynamic_f("%s", data.output->name) {
- data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
- test_setup(&data);
- test_cleanup(&data);
- }
- }
- }
+ for (y = 0; y < ARRAY_SIZE(fbc_status); y++) {
+ data.op_fbc_mode = fbc_status[y];
+ for (z = 0; z < ARRAY_SIZE(modes); z++) {
+ data.op_psr_mode = modes[z];
- igt_describe("Check if psr is detecting changes when drrs is disabled");
- igt_subtest_with_dynamic_f("%sno-drrs", append_subtest_name[z]) {
- for_each_connected_output(&data.display, output) {
- if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
- data.op_psr_mode, output))
- continue;
- igt_display_reset(&data.display);
- data.output = output;
- igt_dynamic_f("%s", data.output->name) {
- data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
- test_setup(&data);
- igt_assert(drrs_disabled(&data));
- test_cleanup(&data);
+ igt_describe("Basic check for psr if it is detecting changes made "
+ "in planes");
+ igt_subtest_with_dynamic_f("%s%sbasic", append_fbc_subtest[y],
+ append_subtest_name[z]) {
+ for_each_connected_output(&data.display, output) {
+ if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
+ data.op_psr_mode, output))
+ continue;
+ igt_display_reset(&data.display);
+ data.output = output;
+ igt_dynamic_f("%s", data.output->name) {
+ data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
+ test_setup(&data);
+ test_cleanup(&data);
+ }
}
}
- }
- for (op = PAGE_FLIP; op <= RENDER; op++) {
- igt_describe("Check if psr is detecting page-flipping,memory mapping and "
- "rendering operations performed on primary planes");
- igt_subtest_with_dynamic_f("%sprimary-%s",
- append_subtest_name[z],
- op_str(op)) {
- igt_skip_on(is_xe_device(data.drm_fd) &&
- (op == MMAP_CPU || op == MMAP_GTT));
+ igt_describe("Check if psr is detecting changes when drrs is disabled");
+ igt_subtest_with_dynamic_f("%s%sno-drrs", append_fbc_subtest[y],
+ append_subtest_name[z]) {
for_each_connected_output(&data.display, output) {
if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
data.op_psr_mode, output))
@@ -750,24 +835,88 @@ igt_main
igt_display_reset(&data.display);
data.output = output;
igt_dynamic_f("%s", data.output->name) {
- data.op = op;
data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
test_setup(&data);
- run_test(&data);
+ igt_assert(drrs_disabled(&data));
test_cleanup(&data);
}
}
}
+
+ for (op = PAGE_FLIP; op <= RENDER; op++) {
+ igt_describe("Check if psr is detecting page-flipping,memory "
+ "mapping and rendering operations performed on "
+ "primary planes");
+ igt_subtest_with_dynamic_f("%s%sprimary-%s", append_fbc_subtest[y],
+ append_subtest_name[z], op_str(op)) {
+ igt_skip_on(is_xe_device(data.drm_fd) &&
+ (op == MMAP_CPU || op == MMAP_GTT));
+ for_each_connected_output(&data.display, output) {
+ if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
+ data.op_psr_mode, output))
+ continue;
+ igt_display_reset(&data.display);
+ data.output = output;
+ igt_dynamic_f("%s", data.output->name) {
+ data.op = op;
+ data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
+ test_setup(&data);
+ run_test(&data);
+ test_cleanup(&data);
+ }
+ }
+ }
+ }
+
+ for (op = MMAP_GTT; op <= PLANE_ONOFF; op++) {
+ igt_describe("Check if psr is detecting memory mapping,rendering "
+ "and plane operations performed on sprite planes");
+ igt_subtest_with_dynamic_f("%s%ssprite-%s", append_fbc_subtest[y],
+ append_subtest_name[z], op_str(op)) {
+ igt_skip_on(is_xe_device(data.drm_fd) &&
+ (op == MMAP_CPU || op == MMAP_GTT));
+ for_each_connected_output(&data.display, output) {
+ if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
+ data.op_psr_mode, output))
+ continue;
+ igt_display_reset(&data.display);
+ data.output = output;
+ igt_dynamic_f("%s", data.output->name) {
+ data.op = op;
+ data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
+ test_setup(&data);
+ run_test(&data);
+ test_cleanup(&data);
+ }
+ }
+ }
+
+ igt_describe("Check if psr is detecting memory mapping, rendering "
+ "and plane operations performed on cursor planes");
+ igt_subtest_with_dynamic_f("%s%scursor-%s", append_fbc_subtest[y],
+ append_subtest_name[z], op_str(op)) {
+ igt_skip_on(is_xe_device(data.drm_fd) &&
+ (op == MMAP_CPU || op == MMAP_GTT));
+ for_each_connected_output(&data.display, output) {
+ if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
+ data.op_psr_mode, output))
+ continue;
+ igt_display_reset(&data.display);
+ data.output = output;
+ igt_dynamic_f("%s", data.output->name) {
+ data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
+ test_setup(&data);
+ run_test(&data);
+ test_cleanup(&data);
+ }
+ }
+ }
}
- for (op = MMAP_GTT; op <= PLANE_ONOFF; op++) {
- igt_describe("Check if psr is detecting memory mapping,rendering "
- "and plane operations performed on sprite planes");
- igt_subtest_with_dynamic_f("%ssprite-%s",
- append_subtest_name[z],
- op_str(op)) {
- igt_skip_on(is_xe_device(data.drm_fd) &&
- (op == MMAP_CPU || op == MMAP_GTT));
+ igt_describe("Check if psr is detecting changes when rendering operation "
+ "is performed with dpms enabled or disabled");
+ igt_subtest_with_dynamic_f("%s%sdpms", append_fbc_subtest[y],
+ append_subtest_name[z]) {
for_each_connected_output(&data.display, output) {
if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
data.op_psr_mode, output))
@@ -775,22 +924,21 @@ igt_main
igt_display_reset(&data.display);
data.output = output;
igt_dynamic_f("%s", data.output->name) {
- data.op = op;
- data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
+ data.op = igt_get_render_copyfunc(data.devid) ?
+ RENDER : BLT;
+ data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
test_setup(&data);
+ dpms_off_on(&data);
run_test(&data);
test_cleanup(&data);
}
}
}
- igt_describe("Check if psr is detecting memory mapping, rendering "
- "and plane operations performed on cursor planes");
- igt_subtest_with_dynamic_f("%scursor-%s",
- append_subtest_name[z],
- op_str(op)) {
- igt_skip_on(is_xe_device(data.drm_fd) &&
- (op == MMAP_CPU || op == MMAP_GTT));
+ igt_describe("Check if psr is detecting changes when plane operation is "
+ "performed with suspend resume cycles");
+ igt_subtest_with_dynamic_f("%s%ssuspend", append_fbc_subtest[y],
+ append_subtest_name[z]) {
for_each_connected_output(&data.display, output) {
if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
data.op_psr_mode, output))
@@ -798,56 +946,18 @@ igt_main
igt_display_reset(&data.display);
data.output = output;
igt_dynamic_f("%s", data.output->name) {
+ data.op = PLANE_ONOFF;
data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
test_setup(&data);
+ igt_system_suspend_autoresume(SUSPEND_STATE_MEM,
+ SUSPEND_TEST_NONE);
+ igt_assert(psr_wait_entry_if_enabled(&data));
run_test(&data);
test_cleanup(&data);
}
}
}
}
-
- igt_describe("Check if psr is detecting changes when rendering operation is performed"
- " with dpms enabled or disabled");
- igt_subtest_with_dynamic_f("%sdpms", append_subtest_name[z]) {
- for_each_connected_output(&data.display, output) {
- if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
- data.op_psr_mode, output))
- continue;
- igt_display_reset(&data.display);
- data.output = output;
- igt_dynamic_f("%s", data.output->name) {
- data.op = igt_get_render_copyfunc(data.devid) ? RENDER : BLT;
- data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
- test_setup(&data);
- dpms_off_on(&data);
- run_test(&data);
- test_cleanup(&data);
- }
- }
- }
-
- igt_describe("Check if psr is detecting changes when plane operation is performed "
- "with suspend resume cycles");
- igt_subtest_with_dynamic_f("%ssuspend", append_subtest_name[z]) {
- for_each_connected_output(&data.display, output) {
- if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
- data.op_psr_mode, output))
- continue;
- igt_display_reset(&data.display);
- data.output = output;
- igt_dynamic_f("%s", data.output->name) {
- data.op = PLANE_ONOFF;
- data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
- test_setup(&data);
- igt_system_suspend_autoresume(SUSPEND_STATE_MEM,
- SUSPEND_TEST_NONE);
- igt_assert(psr_wait_entry_if_enabled(&data));
- run_test(&data);
- test_cleanup(&data);
- }
- }
- }
}
igt_fixture {
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [igt-dev] [PATCH i-g-t 4/4] tests/intel/kms_psr2_sf: Add FBC support to PSR2 tests
2023-12-01 12:47 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
` (2 preceding siblings ...)
2023-12-01 12:47 ` [igt-dev] [PATCH i-g-t 3/4] tests/intel/kms_psr: Add FBC support to PSR/PSR2/PR tests Jeevan B
@ 2023-12-01 12:47 ` Jeevan B
3 siblings, 0 replies; 11+ messages in thread
From: Jeevan B @ 2023-12-01 12:47 UTC (permalink / raw)
To: igt-dev
For LunarLake (intel_display_ver 20), FBC can be enabled along with PSR2,
thereby adding FBC checks to validate this scenario.
Signed-off-by: Jeevan B <jeevan.b@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
---
tests/intel/kms_psr2_sf.c | 623 +++++++++++++++++++++-----------------
1 file changed, 351 insertions(+), 272 deletions(-)
diff --git a/tests/intel/kms_psr2_sf.c b/tests/intel/kms_psr2_sf.c
index 27faa93d9..779dd8c58 100644
--- a/tests/intel/kms_psr2_sf.c
+++ b/tests/intel/kms_psr2_sf.c
@@ -28,11 +28,11 @@
* Description: Tests to varify PSR2 selective fetch by sending multiple damaged
* areas
* Driver requirement: i915, xe
- * Functionality: plane, psr2, selective_fetch
* Mega feature: PSR
* Test category: functionality test
*/
+#include "i915/intel_fbc.h"
#include "igt.h"
#include "igt_sysfs.h"
#include "igt_psr.h"
@@ -46,6 +46,12 @@
* SUBTEST: %s-plane-move-continuous-%s
* Description: Test that selective fetch works on moving %arg[1] plane %arg[2]
* visible area (no update)
+ * Functionality: plane, psr2, selective_fetch
+ *
+ * SUBTEST: fbc-%s-plane-move-continuous-%s
+ * Description: Test that fbc with selective fetch works on moving %arg[1] plane %arg[2]
+ * visible area (no update)
+ * Functionality: plane, psr2, selective_fetch, fbc
*
* arg[1]:
*
@@ -62,25 +68,61 @@
/**
* SUBTEST: cursor-plane-update-sf
* Description: Test that selective fetch works on cursor plane
+ * Functionality: plane, psr2, selective_fetch
+ *
+ * SUBTEST: fbc-cursor-plane-update-continuous-sf
+ * Description: Test that fbc with selective fetch works on cursor plane
+ * Functionality: plane, psr2, selective_fetch, fbc
*
* SUBTEST: overlay-plane-update-continuous-sf
* Description: Test that selective fetch works on overlay plane
+ * Functionality: plane, psr2, selective_fetch
+ *
+ * SUBTEST: fbc-overlay-plane-update-continuous-sf-dmg-area
+ * Description: Test that fbc with selective fetch works on overlay plane
+ * Functionality: plane, psr2, selective_fetch, fbc
*
* SUBTEST: overlay-plane-update-sf-dmg-area
* Description: Test that selective fetch works on overlay plane
+ * Functionality: plane, psr2, selective_fetch
+ *
+ * SUBTEST: fbc-overlay-plane-update-continuous-sf
+ * Description: Test that fbc with selective fetch works on overlay plane
+ * Functionality: plane, psr2, selective_fetch, fbc
*
* SUBTEST: overlay-primary-update-sf-dmg-area
* Description: Test that selective fetch works on primary plane with blended
* overlay plane
+ * Functionality: plane, psr2, selective_fetch
+ *
+ * SUBTEST: fbc-overlay-primary-update-sf-dmg-area
+ * Description: Test that fbc with selective fetch works on primary plane with blended
+ * overlay plane
+ * Functionality: plane, psr2, selective_fetch, fbc
*
* SUBTEST: plane-move-sf-dmg-area
* Description: Test that selective fetch works on moving overlay plane
+ * Functionality: plane, psr2, selective_fetch
+ *
+ * SUBTEST: fbc-plane-move-sf-dmg-area
+ * Description: Test that fbc with selective fetch works on moving overlay plane
+ * Functionality: plane, psr2, selective_fetch, fbc
*
* SUBTEST: primary-plane-update-sf-dmg-area
* Description: Test that selective fetch works on primary plane
+ * Functionality: plane, psr2, selective_fetch
+ *
+ * SUBTEST: fbc-primary-plane-update-continuous-sf-dmg-area
+ * Description: Test that fbc with selective fetch works on primary plane
+ * Functionality: plane, psr2, selective_fetch, fbc
*
* SUBTEST: primary-plane-update-sf-dmg-area-big-fb
* Description: Test that selective fetch works on primary plane with big fb
+ * Functionality: plane, psr2, selective_fetch
+ *
+ * SUBTEST: fbc-primary-plane-update-continuous-sf-dmg-area-big-fb
+ * Description: Test that fbc with selective fetch works on primary plane with big fb
+ * Functionality: plane, psr2, selective_fetch, fbc
*/
IGT_TEST_DESCRIPTION("Tests to varify PSR2 selective fetch by sending multiple"
@@ -131,10 +173,12 @@ typedef struct {
struct drm_mode_rect plane_move_clip;
struct drm_mode_rect cursor_clip;
enum operations op;
+ enum fbc_mode op_fbc_mode;
enum plane_move_postion pos;
int test_plane_id;
igt_plane_t *test_plane;
bool big_fb_test;
+ bool fbc_flag;
cairo_t *cr;
uint32_t screen_changes;
int cur_x, cur_y;
@@ -840,6 +884,11 @@ static void run(data_t *data)
igt_assert(psr_wait_entry(data->debugfs_fd, PSR_MODE_2, NULL));
+ if (data->fbc_flag == true && data->op_fbc_mode == FBC_ENABLED)
+ igt_assert_f(intel_fbc_wait_until_enabled(data->drm_fd,
+ data->pipe),
+ "FBC still disabled");
+
data->screen_changes = 0;
switch (data->op) {
@@ -942,10 +991,15 @@ igt_main
{
data_t data = {};
igt_output_t *outputs[IGT_MAX_PIPES * IGT_MAX_PIPES];
- int i, j, k;
+ int i, j, k, y;
int pipes[IGT_MAX_PIPES * IGT_MAX_PIPES];
int n_pipes = 0;
int coexist_features[IGT_MAX_PIPES * IGT_MAX_PIPES];
+ const char *append_fbc_subtest[2] = {
+ "",
+ "fbc-"
+ };
+ int fbc_status[] = {FBC_DISABLED, FBC_ENABLED};
igt_fixture {
drmModeResPtr res;
@@ -961,6 +1015,11 @@ igt_main
display_init(&data);
+ if ((intel_display_ver(intel_get_drm_devid(data.drm_fd) == 20)) &&
+ (intel_fbc_supported_on_chipset(data.drm_fd, data.pipe))) {
+ data.fbc_flag = true;
+ }
+
/* Test if PSR2 can be enabled */
igt_require_f(psr_enable(data.drm_fd,
data.debugfs_fd, PSR_MODE_2_SEL_FETCH),
@@ -995,54 +1054,116 @@ igt_main
}
}
- /* Verify primary plane selective fetch */
- igt_describe("Test that selective fetch works on primary plane");
- igt_subtest_with_dynamic_f("primary-%s-sf-dmg-area", op_str(data.op)) {
- for (i = 0; i < n_pipes; i++) {
- if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
- continue;
+ for (y = 0; y < ARRAY_SIZE(fbc_status); y++) {
+ data.op_fbc_mode = fbc_status[y];
+ /* Verify primary plane selective fetch */
+ igt_describe("Test that selective fetch works on primary plane");
+ igt_subtest_with_dynamic_f("%sprimary-%s-sf-dmg-area", append_fbc_subtest[y],
+ op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
+ continue;
+
+ for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
+ if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ continue;
+ igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i]),
+ coexist_feature_str(j)) {
+ data.pipe = pipes[i];
+ data.output = outputs[i];
+ data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
+ data.coexist_feature = j;
+ for (k = 1; k <= MAX_DAMAGE_AREAS; k++) {
+ data.damage_area_count = k;
+ prepare(&data);
+ run(&data);
+ cleanup(&data);
+ }
+ }
+ }
+ }
+ }
- for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
- if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ /* Verify primary plane selective fetch with big fb */
+ data.big_fb_test = 1;
+ igt_describe("Test that selective fetch works on primary plane with big fb");
+ igt_subtest_with_dynamic_f("%sprimary-%s-sf-dmg-area-big-fb", append_fbc_subtest[y],
+ op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
continue;
- igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
- igt_output_name(outputs[i]),
- coexist_feature_str(j)) {
- data.pipe = pipes[i];
- data.output = outputs[i];
- data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
- data.coexist_feature = j;
- for (k = 1; k <= MAX_DAMAGE_AREAS; k++) {
- data.damage_area_count = k;
- prepare(&data);
- run(&data);
- cleanup(&data);
+
+ for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
+ if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ continue;
+ igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i]),
+ coexist_feature_str(j)) {
+ data.pipe = pipes[i];
+ data.output = outputs[i];
+ data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
+ data.coexist_feature = j;
+ for (k = 1; k <= MAX_DAMAGE_AREAS; k++) {
+ data.damage_area_count = k;
+ prepare(&data);
+ run(&data);
+ cleanup(&data);
+ }
}
}
}
}
- }
- /* Verify primary plane selective fetch with big fb */
- data.big_fb_test = 1;
- igt_describe("Test that selective fetch works on primary plane with big fb");
- igt_subtest_with_dynamic_f("primary-%s-sf-dmg-area-big-fb", op_str(data.op)) {
- for (i = 0; i < n_pipes; i++) {
- if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
- continue;
+ data.big_fb_test = 0;
+ /* Verify overlay plane selective fetch */
+ igt_describe("Test that selective fetch works on overlay plane");
+ igt_subtest_with_dynamic_f("%soverlay-%s-sf-dmg-area", append_fbc_subtest[y],
+ op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
+ continue;
- for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
- if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
+ if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ continue;
+ igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i]),
+ coexist_feature_str(j)) {
+ data.pipe = pipes[i];
+ data.output = outputs[i];
+ data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
+ data.coexist_feature = j;
+ for (k = 1; k <= MAX_DAMAGE_AREAS; k++) {
+ data.damage_area_count = k;
+ prepare(&data);
+ run(&data);
+ cleanup(&data);
+ }
+ }
+ }
+ }
+ }
+
+ data.damage_area_count = 1;
+ /* Verify cursor plane selective fetch */
+ igt_describe("Test that selective fetch works on cursor plane");
+ igt_subtest_with_dynamic_f("%scursor-%s-sf", append_fbc_subtest[y],
+ op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
continue;
- igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
- igt_output_name(outputs[i]),
- coexist_feature_str(j)) {
- data.pipe = pipes[i];
- data.output = outputs[i];
- data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
- data.coexist_feature = j;
- for (k = 1; k <= MAX_DAMAGE_AREAS; k++) {
- data.damage_area_count = k;
+
+ for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
+ if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ continue;
+ igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i]),
+ coexist_feature_str(j)) {
+ data.pipe = pipes[i];
+ data.output = outputs[i];
+ data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
+ data.coexist_feature = j;
prepare(&data);
run(&data);
cleanup(&data);
@@ -1050,28 +1171,25 @@ igt_main
}
}
}
- }
- data.big_fb_test = 0;
- /* Verify overlay plane selective fetch */
- igt_describe("Test that selective fetch works on overlay plane");
- igt_subtest_with_dynamic_f("overlay-%s-sf-dmg-area", op_str(data.op)) {
- for (i = 0; i < n_pipes; i++) {
- if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
- continue;
-
- for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
- if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ data.op = PLANE_MOVE_CONTINUOUS;
+ igt_describe("Test that selective fetch works on moving cursor plane (no update)");
+ igt_subtest_with_dynamic_f("%scursor-%s-sf", append_fbc_subtest[y],
+ op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
continue;
- igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
- igt_output_name(outputs[i]),
- coexist_feature_str(j)) {
- data.pipe = pipes[i];
- data.output = outputs[i];
- data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- data.coexist_feature = j;
- for (k = 1; k <= MAX_DAMAGE_AREAS; k++) {
- data.damage_area_count = k;
+
+ for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
+ if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ continue;
+ igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i]),
+ coexist_feature_str(j)) {
+ data.pipe = pipes[i];
+ data.output = outputs[i];
+ data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
+ data.coexist_feature = j;
prepare(&data);
run(&data);
cleanup(&data);
@@ -1079,130 +1197,137 @@ igt_main
}
}
}
- }
-
- data.damage_area_count = 1;
- /* Verify cursor plane selective fetch */
- igt_describe("Test that selective fetch works on cursor plane");
- igt_subtest_with_dynamic_f("cursor-%s-sf", op_str(data.op)) {
- for (i = 0; i < n_pipes; i++) {
- if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
- continue;
- for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
- if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ data.op = PLANE_MOVE_CONTINUOUS_EXCEED;
+ igt_describe("Test that selective fetch works on moving cursor plane exceeding "
+ "partially visible area (no update)");
+ igt_subtest_with_dynamic_f("%scursor-%s-sf", append_fbc_subtest[y],
+ op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
continue;
- igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
- igt_output_name(outputs[i]),
- coexist_feature_str(j)) {
- data.pipe = pipes[i];
- data.output = outputs[i];
- data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
- data.coexist_feature = j;
- prepare(&data);
- run(&data);
- cleanup(&data);
+
+ for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
+ if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ continue;
+ igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i]),
+ coexist_feature_str(j)) {
+ data.pipe = pipes[i];
+ data.output = outputs[i];
+ data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
+ data.coexist_feature = j;
+ prepare(&data);
+ run(&data);
+ cleanup(&data);
+ }
}
}
}
- }
- data.op = PLANE_MOVE_CONTINUOUS;
- igt_describe("Test that selective fetch works on moving cursor plane (no update)");
- igt_subtest_with_dynamic_f("cursor-%s-sf", op_str(data.op)) {
- for (i = 0; i < n_pipes; i++) {
- if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
- continue;
-
- for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
- if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ data.op = PLANE_MOVE_CONTINUOUS_EXCEED_FULLY;
+ igt_describe("Test that selective fetch works on moving cursor plane exceeding "
+ "fully visible area (no update)");
+ igt_subtest_with_dynamic_f("%scursor-%s-sf", append_fbc_subtest[y],
+ op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
continue;
- igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
- igt_output_name(outputs[i]),
- coexist_feature_str(j)) {
- data.pipe = pipes[i];
- data.output = outputs[i];
- data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
- data.coexist_feature = j;
- prepare(&data);
- run(&data);
- cleanup(&data);
+
+ for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
+ if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ continue;
+ igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i]),
+ coexist_feature_str(j)) {
+ data.pipe = pipes[i];
+ data.output = outputs[i];
+ data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
+ data.coexist_feature = j;
+ prepare(&data);
+ run(&data);
+ cleanup(&data);
+ }
}
}
}
- }
- data.op = PLANE_MOVE_CONTINUOUS_EXCEED;
- igt_describe("Test that selective fetch works on moving cursor plane exceeding partially visible area (no update)");
- igt_subtest_with_dynamic_f("cursor-%s-sf", op_str(data.op)) {
- for (i = 0; i < n_pipes; i++) {
- if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
- continue;
-
- for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
- if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ /* Only for overlay plane */
+ data.op = PLANE_MOVE;
+ /* Verify overlay plane move selective fetch */
+ igt_describe("Test that selective fetch works on moving overlay plane");
+ igt_subtest_with_dynamic_f("%s%s-sf-dmg-area", append_fbc_subtest[y],
+ op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
continue;
- igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
- igt_output_name(outputs[i]),
- coexist_feature_str(j)) {
- data.pipe = pipes[i];
- data.output = outputs[i];
- data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
- data.coexist_feature = j;
- prepare(&data);
- run(&data);
- cleanup(&data);
+
+ for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
+ if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ continue;
+ igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i]),
+ coexist_feature_str(j)) {
+ data.pipe = pipes[i];
+ data.output = outputs[i];
+ data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
+ data.coexist_feature = j;
+ for (k = POS_TOP_LEFT; k <= POS_BOTTOM_RIGHT ; k++) {
+ data.pos = k;
+ prepare(&data);
+ run(&data);
+ cleanup(&data);
+ }
+ }
}
}
}
- }
-
- data.op = PLANE_MOVE_CONTINUOUS_EXCEED_FULLY;
- igt_describe("Test that selective fetch works on moving cursor plane exceeding fully visible area (no update)");
- igt_subtest_with_dynamic_f("cursor-%s-sf", op_str(data.op)) {
- for (i = 0; i < n_pipes; i++) {
- if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
- continue;
- for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
- if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ data.op = PLANE_MOVE_CONTINUOUS;
+ igt_describe("Test that selective fetch works on moving overlay plane (no update)");
+ igt_subtest_with_dynamic_f("%soverlay-%s-sf", append_fbc_subtest[y],
+ op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
continue;
- igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
- igt_output_name(outputs[i]),
- coexist_feature_str(j)) {
+
+ for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
+ if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ continue;
+ igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i]),
+ coexist_feature_str(j)) {
data.pipe = pipes[i];
data.output = outputs[i];
- data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
+ data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
data.coexist_feature = j;
prepare(&data);
run(&data);
cleanup(&data);
+ }
}
}
}
- }
- /* Only for overlay plane */
- data.op = PLANE_MOVE;
- /* Verify overlay plane move selective fetch */
- igt_describe("Test that selective fetch works on moving overlay plane");
- igt_subtest_with_dynamic_f("%s-sf-dmg-area", op_str(data.op)) {
- for (i = 0; i < n_pipes; i++) {
- if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
- continue;
-
- for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
- if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ data.op = PLANE_MOVE_CONTINUOUS_EXCEED;
+ igt_describe("Test that selective fetch works on moving overlay plane partially "
+ "exceeding visible area (no update)");
+ igt_subtest_with_dynamic_f("%soverlay-%s-sf", append_fbc_subtest[y],
+ op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
continue;
- igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
- igt_output_name(outputs[i]),
- coexist_feature_str(j)) {
- data.pipe = pipes[i];
- data.output = outputs[i];
- data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- data.coexist_feature = j;
- for (k = POS_TOP_LEFT; k <= POS_BOTTOM_RIGHT ; k++) {
- data.pos = k;
+
+ for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
+ if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ continue;
+ igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i]),
+ coexist_feature_str(j)) {
+ data.pipe = pipes[i];
+ data.output = outputs[i];
+ data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
+ data.coexist_feature = j;
prepare(&data);
run(&data);
cleanup(&data);
@@ -1210,103 +1335,88 @@ igt_main
}
}
}
- }
-
- data.op = PLANE_MOVE_CONTINUOUS;
- igt_describe("Test that selective fetch works on moving overlay plane (no update)");
- igt_subtest_with_dynamic_f("overlay-%s-sf", op_str(data.op)) {
- for (i = 0; i < n_pipes; i++) {
- if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
- continue;
- for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
- if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ data.op = PLANE_MOVE_CONTINUOUS_EXCEED_FULLY;
+ igt_describe("Test that selective fetch works on moving overlay plane fully "
+ "exceeding visible area (no update)");
+ igt_subtest_with_dynamic_f("%soverlay-%s-sf", append_fbc_subtest[y],
+ op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
continue;
- igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
- igt_output_name(outputs[i]),
- coexist_feature_str(j)) {
- data.pipe = pipes[i];
- data.output = outputs[i];
- data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- data.coexist_feature = j;
- prepare(&data);
- run(&data);
- cleanup(&data);
- }
- }
- }
- }
-
- data.op = PLANE_MOVE_CONTINUOUS_EXCEED;
- igt_describe("Test that selective fetch works on moving overlay plane partially exceeding visible area (no update)");
- igt_subtest_with_dynamic_f("overlay-%s-sf", op_str(data.op)) {
- for (i = 0; i < n_pipes; i++) {
- if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
- continue;
- for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
- if (j != FEATURE_NONE && !(coexist_features[i] & j))
- continue;
- igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
- igt_output_name(outputs[i]),
- coexist_feature_str(j)) {
- data.pipe = pipes[i];
- data.output = outputs[i];
- data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- data.coexist_feature = j;
- prepare(&data);
- run(&data);
- cleanup(&data);
+ for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
+ if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ continue;
+ igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i]),
+ coexist_feature_str(j)) {
+ data.pipe = pipes[i];
+ data.output = outputs[i];
+ data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
+ data.coexist_feature = j;
+ prepare(&data);
+ run(&data);
+ cleanup(&data);
+ }
}
}
}
- }
- data.op = PLANE_MOVE_CONTINUOUS_EXCEED_FULLY;
- igt_describe("Test that selective fetch works on moving overlay plane fully exceeding visible area (no update)");
- igt_subtest_with_dynamic_f("overlay-%s-sf", op_str(data.op)) {
- for (i = 0; i < n_pipes; i++) {
- if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
- continue;
-
- for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
- if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ /* Verify primary plane selective fetch with overplay plane blended */
+ data.op = OVERLAY_PRIM_UPDATE;
+ igt_describe("Test that selective fetch works on primary plane "
+ "with blended overlay plane");
+ igt_subtest_with_dynamic_f("%s%s-sf-dmg-area", append_fbc_subtest[y],
+ op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
continue;
- igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
- igt_output_name(outputs[i]),
- coexist_feature_str(j)) {
- data.pipe = pipes[i];
- data.output = outputs[i];
- data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- data.coexist_feature = j;
- prepare(&data);
- run(&data);
- cleanup(&data);
+
+ for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
+ if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ continue;
+ igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i]),
+ coexist_feature_str(j)) {
+ data.pipe = pipes[i];
+ data.output = outputs[i];
+ for (k = 1; k <= MAX_DAMAGE_AREAS; k++) {
+ data.damage_area_count = k;
+ data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
+ data.coexist_feature = j;
+ prepare(&data);
+ run(&data);
+ cleanup(&data);
+ }
+ }
}
}
}
- }
- /* Verify primary plane selective fetch with overplay plane blended */
- data.op = OVERLAY_PRIM_UPDATE;
- igt_describe("Test that selective fetch works on primary plane "
- "with blended overlay plane");
- igt_subtest_with_dynamic_f("%s-sf-dmg-area", op_str(data.op)) {
- for (i = 0; i < n_pipes; i++) {
- if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
- continue;
-
- for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
- if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ /*
+ * Verify overlay plane selective fetch using NV12 primary
+ * plane and continuous updates.
+ */
+ data.op = PLANE_UPDATE_CONTINUOUS;
+ data.primary_format = DRM_FORMAT_NV12;
+ igt_describe("Test that selective fetch works on overlay plane");
+ igt_subtest_with_dynamic_f("%soverlay-%s-sf", append_fbc_subtest[y],
+ op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
continue;
- igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
- igt_output_name(outputs[i]),
- coexist_feature_str(j)) {
- data.pipe = pipes[i];
- data.output = outputs[i];
- for (k = 1; k <= MAX_DAMAGE_AREAS; k++) {
- data.damage_area_count = k;
- data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
+
+ for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
+ if (j != FEATURE_NONE && !(coexist_features[i] & j))
+ continue;
+ igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i]),
+ coexist_feature_str(j)) {
+ data.pipe = pipes[i];
+ data.output = outputs[i];
+ data.damage_area_count = 1;
+ data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
data.coexist_feature = j;
prepare(&data);
run(&data);
@@ -1317,37 +1427,6 @@ igt_main
}
}
- /*
- * Verify overlay plane selective fetch using NV12 primary
- * plane and continuous updates.
- */
- data.op = PLANE_UPDATE_CONTINUOUS;
- data.primary_format = DRM_FORMAT_NV12;
- igt_describe("Test that selective fetch works on overlay plane");
- igt_subtest_with_dynamic_f("overlay-%s-sf", op_str(data.op)) {
- for (i = 0; i < n_pipes; i++) {
- if (!pipe_output_combo_valid(&data.display, pipes[i], outputs[i]))
- continue;
-
- for (j = FEATURE_NONE; j < FEATURE_COUNT; j++) {
- if (j != FEATURE_NONE && !(coexist_features[i] & j))
- continue;
- igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipes[i]),
- igt_output_name(outputs[i]),
- coexist_feature_str(j)) {
- data.pipe = pipes[i];
- data.output = outputs[i];
- data.damage_area_count = 1;
- data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- data.coexist_feature = j;
- prepare(&data);
- run(&data);
- cleanup(&data);
- }
- }
- }
- }
-
igt_fixture {
close(data.debugfs_fd);
display_fini(&data);
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation
2023-12-01 12:49 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
@ 2023-12-01 12:49 ` Jeevan B
0 siblings, 0 replies; 11+ messages in thread
From: Jeevan B @ 2023-12-01 12:49 UTC (permalink / raw)
To: igt-dev
From: Swati Sharma <swati2.sharma@intel.com>
Optimize documentation and update mega features accordingly.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jeevan B <jeevan.b@intel.com>
---
tests/intel/kms_psr.c | 215 +++++++++++++++---------------------------
1 file changed, 74 insertions(+), 141 deletions(-)
diff --git a/tests/intel/kms_psr.c b/tests/intel/kms_psr.c
index 05bdd7b98..31d6f779c 100644
--- a/tests/intel/kms_psr.c
+++ b/tests/intel/kms_psr.c
@@ -43,143 +43,93 @@
#include "xe/xe_query.h"
/**
- * SUBTEST: psr_basic
- * Description: Basic check for psr if it is detecting changes made in planes
- * Functionality: psr1
+ * SUBTEST: %s_basic
+ * Description: Basic check for %arg[1] if it is detecting changes made in planes
+ * Functionality: %arg[1]
*
- * SUBTEST: psr_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1]
- * Driver requirement: i915
- * Functionality: kms_core, plane, psr1
- *
- * arg[1]:
- *
- * @cursor: Cursor plane
- * @primary: Primary plane
- * @sprite: Sprite plane
- *
- * arg[2]:
+ * SUBTEST: %s_dpms
+ * Description: Check if %arg[1] is detecting changes when rendering operation
+ * is performed with dpms enabled or disabled
+ * Functionality: %arg[1], dpms
*
- * @mmap_cpu: MMAP CPU
- * @mmap_gtt: MMAP GTT
- */
-
-/**
- * SUBTEST: psr_sprite_plane_move
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on sprite planes
- * Functionality: plane, psr1
+ * SUBTEST: %s_no_drrs
+ * Description: Check if %arg[1] is detecting changes when drrs is disabled
+ * Functionality: %arg[1], drrs
*
- * SUBTEST: psr_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, psr1
+ * SUBTEST: %s_suspend
+ * Description: Check if %arg[1] is detecting changes when plane operation is
+ * performed with suspend resume cycles
+ * Functionality: %arg[1], suspend
*
* arg[1]:
*
- * @cursor: Cursor plane
- * @sprite: Sprite plane
- *
- * arg[2]:
- *
- * @blt: Blitter
- * @render: Render
- * @plane_onoff: Plane On off
+ * @psr: psr1
+ * @psr2: psr2
*/
/**
- * SUBTEST: psr_primary_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, psr1
+ * SUBTEST: %s_%s_%s
+ * Description: Check if %arg[1] is detecting memory mapping %arg[3] operations
+ * performed on %arg[2] planes
+ * Driver requirement: i915
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
- * @blt: Blitter
- * @render: Render
- */
-
-/**
- * SUBTEST: psr_dpms
- * Description: Check if psr is detecting changes when rendering operation is
- * performed with dpms enabled or disabled
- * Functionality: dpms, psr1
- *
- * SUBTEST: psr_no_drrs
- * Description: Check if psr is detecting changes when drrs is disabled
- * Functionality: drrs, psr1
- *
- * SUBTEST: psr_suspend
- * Description: Check if psr is detecting changes when plane operation
- * is performed with suspend resume cycles
- * Functionality: psr1, suspend
- *
- * SUBTEST: psr2_dpms
- * Description: Check if psr is detecting changes when rendering operation
- * is performed with dpms enabled or disabled
- * Functionality: dpms, psr2
- *
- * SUBTEST: psr2_no_drrs
- * Description: Check if psr is detecting changes when drrs is disabled
- * Functionality: drrs, psr2
- *
- * SUBTEST: psr2_suspend
- * Description: Check if psr is detecting changes when plane operation is
- * performed with suspend resume cycles
- * Functionality: psr2, suspend
- *
- * SUBTEST: psr2_basic
- * Description: Basic check for psr if it is detecting changes made in planes
- * Functionality: psr2
+ * @psr: psr1
+ * @psr2: psr2
*
- * SUBTEST: psr2_%s_%s
- * Description: Check if psr2 is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Driver requirement: i915
- * Functionality: kms_core, plane, psr2
- *
- * arg[1]:
+ * arg[2]:
*
* @cursor: Cursor plane
* @primary: Primary plane
* @sprite: Sprite plane
*
- * arg[2]:
+ * arg[3]:
*
* @mmap_cpu: MMAP CPU
* @mmap_gtt: MMAP GTT
*/
/**
- * SUBTEST: psr2_primary_page_flip
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: plane, psr2
+ * SUBTEST: %s_primary_page_flip
+ * Description: Check if %arg[1] is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: %arg[1], plane
*
- * SUBTEST: psr2_primary_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: kms_core, plane, psr2
+ * SUBTEST: %s_primary_%s
+ * Description: Check if %arg[1] is detecting rendering operations %arg[2]
+ * when performed on primary plane
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
+ * @psr: psr1
+ * @psr2: psr2
+ *
+ * arg[2]:
+ *
* @blt: Blitter
* @render: Render
*/
/**
- * SUBTEST: psr2_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, psr2
+ * SUBTEST: %s_%s_%s
+ * Description: Check if %arg[1] is detecting rendering and plane
+ * operations %arg[3] performed on %arg[2] planes
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
+ * @psr: psr1
+ * @psr2: psr2
+ *
+ * arg[2]:
+ *
* @cursor: Cursor plane
* @sprite: Sprite plane
*
- * arg[2]:
+ * arg[3]:
*
* @blt: Blitter
* @render: Render
@@ -188,36 +138,36 @@
*/
/**
+ * SUBTEST: pr_basic
+ * Description: Basic check for pr if it is detecting changes made in planes
+ * Functionality: pr
+ * Mega feature: DP2.0
+ *
* SUBTEST: pr_dpms
* Description: Check if pr is detecting changes when rendering operation
* is performed with dpms enabled or disabled
- * Functionality: dpms, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, dpms
+ * Mega feature: DP2.0
*
* SUBTEST: pr_no_drrs
* Description: Check if pr is detecting changes when drrs is disabled
- * Functionality: drrs, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, drrs
+ * Mega feature: DP2.0
*
* SUBTEST: pr_suspend
* Description: Check if pr is detecting changes when plane operation is
* performed with suspend resume cycles
* Functionality: pr, suspend
- * Mega feature: Panel Replay
- *
- * SUBTEST: pr_basic
- * Description: Basic check for pr if it is detecting changes made in planes
- * Functionality: pr
- * Mega feature: Panel Replay
+ * Mega feature: DP2.0
*/
/**
* SUBTEST: pr_%s_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
+ * Description: Check if pr is detecting memory mapping %arg[2] operations
+ * performed on %arg[1] planes
* Driver requirement: i915
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -233,16 +183,16 @@
/**
* SUBTEST: pr_primary_page_flip
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* SUBTEST: pr_primary_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting rendering operations %arg[1]
+ * when performed on primary plane
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -252,10 +202,10 @@
/**
* SUBTEST: pr_%s_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting rendering and plane
+ * operations %arg[2] performed on %arg[1] planes
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -270,23 +220,6 @@
* @plane_move: Move plane position
*/
-/**
- * SUBTEST: psr_cursor_plane_move
- * Description: Check if psr is detecting the plane operations performed on
- * cursor planes
- * Functionality: psr1
- *
- * SUBTEST: psr_primary_page_flip
- * Description: Check if psr is detecting page-flipping operations performed
- * on primary planes
- * Functionality: psr1
- *
- * SUBTEST: psr_sprite_plane_onoff
- * Description: Check if psr is detecting the plane operations performed on
- * sprite planes
- * Functionality: psr1
- */
-
enum operations {
PAGE_FLIP,
MMAP_GTT,
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation
2023-12-04 9:52 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
@ 2023-12-04 9:52 ` Jeevan B
0 siblings, 0 replies; 11+ messages in thread
From: Jeevan B @ 2023-12-04 9:52 UTC (permalink / raw)
To: igt-dev
From: Swati Sharma <swati2.sharma@intel.com>
Optimize documentation and update mega features accordingly.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jeevan B <jeevan.b@intel.com>
---
tests/intel/kms_psr.c | 215 +++++++++++++++---------------------------
1 file changed, 74 insertions(+), 141 deletions(-)
diff --git a/tests/intel/kms_psr.c b/tests/intel/kms_psr.c
index 05bdd7b98..31d6f779c 100644
--- a/tests/intel/kms_psr.c
+++ b/tests/intel/kms_psr.c
@@ -43,143 +43,93 @@
#include "xe/xe_query.h"
/**
- * SUBTEST: psr_basic
- * Description: Basic check for psr if it is detecting changes made in planes
- * Functionality: psr1
+ * SUBTEST: %s_basic
+ * Description: Basic check for %arg[1] if it is detecting changes made in planes
+ * Functionality: %arg[1]
*
- * SUBTEST: psr_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1]
- * Driver requirement: i915
- * Functionality: kms_core, plane, psr1
- *
- * arg[1]:
- *
- * @cursor: Cursor plane
- * @primary: Primary plane
- * @sprite: Sprite plane
- *
- * arg[2]:
+ * SUBTEST: %s_dpms
+ * Description: Check if %arg[1] is detecting changes when rendering operation
+ * is performed with dpms enabled or disabled
+ * Functionality: %arg[1], dpms
*
- * @mmap_cpu: MMAP CPU
- * @mmap_gtt: MMAP GTT
- */
-
-/**
- * SUBTEST: psr_sprite_plane_move
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on sprite planes
- * Functionality: plane, psr1
+ * SUBTEST: %s_no_drrs
+ * Description: Check if %arg[1] is detecting changes when drrs is disabled
+ * Functionality: %arg[1], drrs
*
- * SUBTEST: psr_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, psr1
+ * SUBTEST: %s_suspend
+ * Description: Check if %arg[1] is detecting changes when plane operation is
+ * performed with suspend resume cycles
+ * Functionality: %arg[1], suspend
*
* arg[1]:
*
- * @cursor: Cursor plane
- * @sprite: Sprite plane
- *
- * arg[2]:
- *
- * @blt: Blitter
- * @render: Render
- * @plane_onoff: Plane On off
+ * @psr: psr1
+ * @psr2: psr2
*/
/**
- * SUBTEST: psr_primary_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, psr1
+ * SUBTEST: %s_%s_%s
+ * Description: Check if %arg[1] is detecting memory mapping %arg[3] operations
+ * performed on %arg[2] planes
+ * Driver requirement: i915
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
- * @blt: Blitter
- * @render: Render
- */
-
-/**
- * SUBTEST: psr_dpms
- * Description: Check if psr is detecting changes when rendering operation is
- * performed with dpms enabled or disabled
- * Functionality: dpms, psr1
- *
- * SUBTEST: psr_no_drrs
- * Description: Check if psr is detecting changes when drrs is disabled
- * Functionality: drrs, psr1
- *
- * SUBTEST: psr_suspend
- * Description: Check if psr is detecting changes when plane operation
- * is performed with suspend resume cycles
- * Functionality: psr1, suspend
- *
- * SUBTEST: psr2_dpms
- * Description: Check if psr is detecting changes when rendering operation
- * is performed with dpms enabled or disabled
- * Functionality: dpms, psr2
- *
- * SUBTEST: psr2_no_drrs
- * Description: Check if psr is detecting changes when drrs is disabled
- * Functionality: drrs, psr2
- *
- * SUBTEST: psr2_suspend
- * Description: Check if psr is detecting changes when plane operation is
- * performed with suspend resume cycles
- * Functionality: psr2, suspend
- *
- * SUBTEST: psr2_basic
- * Description: Basic check for psr if it is detecting changes made in planes
- * Functionality: psr2
+ * @psr: psr1
+ * @psr2: psr2
*
- * SUBTEST: psr2_%s_%s
- * Description: Check if psr2 is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Driver requirement: i915
- * Functionality: kms_core, plane, psr2
- *
- * arg[1]:
+ * arg[2]:
*
* @cursor: Cursor plane
* @primary: Primary plane
* @sprite: Sprite plane
*
- * arg[2]:
+ * arg[3]:
*
* @mmap_cpu: MMAP CPU
* @mmap_gtt: MMAP GTT
*/
/**
- * SUBTEST: psr2_primary_page_flip
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: plane, psr2
+ * SUBTEST: %s_primary_page_flip
+ * Description: Check if %arg[1] is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: %arg[1], plane
*
- * SUBTEST: psr2_primary_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: kms_core, plane, psr2
+ * SUBTEST: %s_primary_%s
+ * Description: Check if %arg[1] is detecting rendering operations %arg[2]
+ * when performed on primary plane
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
+ * @psr: psr1
+ * @psr2: psr2
+ *
+ * arg[2]:
+ *
* @blt: Blitter
* @render: Render
*/
/**
- * SUBTEST: psr2_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, psr2
+ * SUBTEST: %s_%s_%s
+ * Description: Check if %arg[1] is detecting rendering and plane
+ * operations %arg[3] performed on %arg[2] planes
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
+ * @psr: psr1
+ * @psr2: psr2
+ *
+ * arg[2]:
+ *
* @cursor: Cursor plane
* @sprite: Sprite plane
*
- * arg[2]:
+ * arg[3]:
*
* @blt: Blitter
* @render: Render
@@ -188,36 +138,36 @@
*/
/**
+ * SUBTEST: pr_basic
+ * Description: Basic check for pr if it is detecting changes made in planes
+ * Functionality: pr
+ * Mega feature: DP2.0
+ *
* SUBTEST: pr_dpms
* Description: Check if pr is detecting changes when rendering operation
* is performed with dpms enabled or disabled
- * Functionality: dpms, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, dpms
+ * Mega feature: DP2.0
*
* SUBTEST: pr_no_drrs
* Description: Check if pr is detecting changes when drrs is disabled
- * Functionality: drrs, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, drrs
+ * Mega feature: DP2.0
*
* SUBTEST: pr_suspend
* Description: Check if pr is detecting changes when plane operation is
* performed with suspend resume cycles
* Functionality: pr, suspend
- * Mega feature: Panel Replay
- *
- * SUBTEST: pr_basic
- * Description: Basic check for pr if it is detecting changes made in planes
- * Functionality: pr
- * Mega feature: Panel Replay
+ * Mega feature: DP2.0
*/
/**
* SUBTEST: pr_%s_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
+ * Description: Check if pr is detecting memory mapping %arg[2] operations
+ * performed on %arg[1] planes
* Driver requirement: i915
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -233,16 +183,16 @@
/**
* SUBTEST: pr_primary_page_flip
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* SUBTEST: pr_primary_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting rendering operations %arg[1]
+ * when performed on primary plane
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -252,10 +202,10 @@
/**
* SUBTEST: pr_%s_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting rendering and plane
+ * operations %arg[2] performed on %arg[1] planes
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -270,23 +220,6 @@
* @plane_move: Move plane position
*/
-/**
- * SUBTEST: psr_cursor_plane_move
- * Description: Check if psr is detecting the plane operations performed on
- * cursor planes
- * Functionality: psr1
- *
- * SUBTEST: psr_primary_page_flip
- * Description: Check if psr is detecting page-flipping operations performed
- * on primary planes
- * Functionality: psr1
- *
- * SUBTEST: psr_sprite_plane_onoff
- * Description: Check if psr is detecting the plane operations performed on
- * sprite planes
- * Functionality: psr1
- */
-
enum operations {
PAGE_FLIP,
MMAP_GTT,
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation
2023-12-04 9:59 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
@ 2023-12-04 9:59 ` Jeevan B
0 siblings, 0 replies; 11+ messages in thread
From: Jeevan B @ 2023-12-04 9:59 UTC (permalink / raw)
To: igt-dev
From: Swati Sharma <swati2.sharma@intel.com>
Optimize documentation and update mega features accordingly.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jeevan B <jeevan.b@intel.com>
---
tests/intel/kms_psr.c | 215 +++++++++++++++---------------------------
1 file changed, 74 insertions(+), 141 deletions(-)
diff --git a/tests/intel/kms_psr.c b/tests/intel/kms_psr.c
index 05bdd7b98..31d6f779c 100644
--- a/tests/intel/kms_psr.c
+++ b/tests/intel/kms_psr.c
@@ -43,143 +43,93 @@
#include "xe/xe_query.h"
/**
- * SUBTEST: psr_basic
- * Description: Basic check for psr if it is detecting changes made in planes
- * Functionality: psr1
+ * SUBTEST: %s_basic
+ * Description: Basic check for %arg[1] if it is detecting changes made in planes
+ * Functionality: %arg[1]
*
- * SUBTEST: psr_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1]
- * Driver requirement: i915
- * Functionality: kms_core, plane, psr1
- *
- * arg[1]:
- *
- * @cursor: Cursor plane
- * @primary: Primary plane
- * @sprite: Sprite plane
- *
- * arg[2]:
+ * SUBTEST: %s_dpms
+ * Description: Check if %arg[1] is detecting changes when rendering operation
+ * is performed with dpms enabled or disabled
+ * Functionality: %arg[1], dpms
*
- * @mmap_cpu: MMAP CPU
- * @mmap_gtt: MMAP GTT
- */
-
-/**
- * SUBTEST: psr_sprite_plane_move
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on sprite planes
- * Functionality: plane, psr1
+ * SUBTEST: %s_no_drrs
+ * Description: Check if %arg[1] is detecting changes when drrs is disabled
+ * Functionality: %arg[1], drrs
*
- * SUBTEST: psr_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, psr1
+ * SUBTEST: %s_suspend
+ * Description: Check if %arg[1] is detecting changes when plane operation is
+ * performed with suspend resume cycles
+ * Functionality: %arg[1], suspend
*
* arg[1]:
*
- * @cursor: Cursor plane
- * @sprite: Sprite plane
- *
- * arg[2]:
- *
- * @blt: Blitter
- * @render: Render
- * @plane_onoff: Plane On off
+ * @psr: psr1
+ * @psr2: psr2
*/
/**
- * SUBTEST: psr_primary_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, psr1
+ * SUBTEST: %s_%s_%s
+ * Description: Check if %arg[1] is detecting memory mapping %arg[3] operations
+ * performed on %arg[2] planes
+ * Driver requirement: i915
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
- * @blt: Blitter
- * @render: Render
- */
-
-/**
- * SUBTEST: psr_dpms
- * Description: Check if psr is detecting changes when rendering operation is
- * performed with dpms enabled or disabled
- * Functionality: dpms, psr1
- *
- * SUBTEST: psr_no_drrs
- * Description: Check if psr is detecting changes when drrs is disabled
- * Functionality: drrs, psr1
- *
- * SUBTEST: psr_suspend
- * Description: Check if psr is detecting changes when plane operation
- * is performed with suspend resume cycles
- * Functionality: psr1, suspend
- *
- * SUBTEST: psr2_dpms
- * Description: Check if psr is detecting changes when rendering operation
- * is performed with dpms enabled or disabled
- * Functionality: dpms, psr2
- *
- * SUBTEST: psr2_no_drrs
- * Description: Check if psr is detecting changes when drrs is disabled
- * Functionality: drrs, psr2
- *
- * SUBTEST: psr2_suspend
- * Description: Check if psr is detecting changes when plane operation is
- * performed with suspend resume cycles
- * Functionality: psr2, suspend
- *
- * SUBTEST: psr2_basic
- * Description: Basic check for psr if it is detecting changes made in planes
- * Functionality: psr2
+ * @psr: psr1
+ * @psr2: psr2
*
- * SUBTEST: psr2_%s_%s
- * Description: Check if psr2 is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Driver requirement: i915
- * Functionality: kms_core, plane, psr2
- *
- * arg[1]:
+ * arg[2]:
*
* @cursor: Cursor plane
* @primary: Primary plane
* @sprite: Sprite plane
*
- * arg[2]:
+ * arg[3]:
*
* @mmap_cpu: MMAP CPU
* @mmap_gtt: MMAP GTT
*/
/**
- * SUBTEST: psr2_primary_page_flip
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: plane, psr2
+ * SUBTEST: %s_primary_page_flip
+ * Description: Check if %arg[1] is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: %arg[1], plane
*
- * SUBTEST: psr2_primary_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: kms_core, plane, psr2
+ * SUBTEST: %s_primary_%s
+ * Description: Check if %arg[1] is detecting rendering operations %arg[2]
+ * when performed on primary plane
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
+ * @psr: psr1
+ * @psr2: psr2
+ *
+ * arg[2]:
+ *
* @blt: Blitter
* @render: Render
*/
/**
- * SUBTEST: psr2_%s_%s
- * Description: Check if psr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, psr2
+ * SUBTEST: %s_%s_%s
+ * Description: Check if %arg[1] is detecting rendering and plane
+ * operations %arg[3] performed on %arg[2] planes
+ * Functionality: %arg[1], plane
*
* arg[1]:
*
+ * @psr: psr1
+ * @psr2: psr2
+ *
+ * arg[2]:
+ *
* @cursor: Cursor plane
* @sprite: Sprite plane
*
- * arg[2]:
+ * arg[3]:
*
* @blt: Blitter
* @render: Render
@@ -188,36 +138,36 @@
*/
/**
+ * SUBTEST: pr_basic
+ * Description: Basic check for pr if it is detecting changes made in planes
+ * Functionality: pr
+ * Mega feature: DP2.0
+ *
* SUBTEST: pr_dpms
* Description: Check if pr is detecting changes when rendering operation
* is performed with dpms enabled or disabled
- * Functionality: dpms, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, dpms
+ * Mega feature: DP2.0
*
* SUBTEST: pr_no_drrs
* Description: Check if pr is detecting changes when drrs is disabled
- * Functionality: drrs, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, drrs
+ * Mega feature: DP2.0
*
* SUBTEST: pr_suspend
* Description: Check if pr is detecting changes when plane operation is
* performed with suspend resume cycles
* Functionality: pr, suspend
- * Mega feature: Panel Replay
- *
- * SUBTEST: pr_basic
- * Description: Basic check for pr if it is detecting changes made in planes
- * Functionality: pr
- * Mega feature: Panel Replay
+ * Mega feature: DP2.0
*/
/**
* SUBTEST: pr_%s_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
+ * Description: Check if pr is detecting memory mapping %arg[2] operations
+ * performed on %arg[1] planes
* Driver requirement: i915
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -233,16 +183,16 @@
/**
* SUBTEST: pr_primary_page_flip
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* SUBTEST: pr_primary_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on primary planes
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting rendering operations %arg[1]
+ * when performed on primary plane
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -252,10 +202,10 @@
/**
* SUBTEST: pr_%s_%s
- * Description: Check if pr is detecting memory mapping, rendering and plane
- * operations performed on %arg[1] planes
- * Functionality: kms_core, plane, pr
- * Mega feature: Panel Replay
+ * Description: Check if pr is detecting rendering and plane
+ * operations %arg[2] performed on %arg[1] planes
+ * Functionality: pr, plane
+ * Mega feature: DP2.0
*
* arg[1]:
*
@@ -270,23 +220,6 @@
* @plane_move: Move plane position
*/
-/**
- * SUBTEST: psr_cursor_plane_move
- * Description: Check if psr is detecting the plane operations performed on
- * cursor planes
- * Functionality: psr1
- *
- * SUBTEST: psr_primary_page_flip
- * Description: Check if psr is detecting page-flipping operations performed
- * on primary planes
- * Functionality: psr1
- *
- * SUBTEST: psr_sprite_plane_onoff
- * Description: Check if psr is detecting the plane operations performed on
- * sprite planes
- * Functionality: psr1
- */
-
enum operations {
PAGE_FLIP,
MMAP_GTT,
--
2.25.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
end of thread, other threads:[~2023-12-04 9:52 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-12-01 12:47 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
2023-12-01 12:47 ` [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation Jeevan B
2023-12-01 12:47 ` [igt-dev] [PATCH i-g-t 2/4] tests/intel/kms_psr: fix subtest naming Jeevan B
2023-12-01 12:47 ` [igt-dev] [PATCH i-g-t 3/4] tests/intel/kms_psr: Add FBC support to PSR/PSR2/PR tests Jeevan B
2023-12-01 12:47 ` [igt-dev] [PATCH i-g-t 4/4] tests/intel/kms_psr2_sf: Add FBC support to PSR2 tests Jeevan B
-- strict thread matches above, loose matches on Subject: below --
2023-12-04 9:59 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
2023-12-04 9:59 ` [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation Jeevan B
2023-12-04 9:52 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
2023-12-04 9:52 ` [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation Jeevan B
2023-12-01 12:49 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
2023-12-01 12:49 ` [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation Jeevan B
2023-12-01 11:22 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
2023-12-01 11:22 ` [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation Jeevan B
2023-11-30 13:20 [igt-dev] [PATCH i-g-t 0/4] Update PSR/PSR2_SF documenation and Add FBC support Jeevan B
2023-11-30 13:20 ` [igt-dev] [PATCH i-g-t 1/4] tests/intel/kms_psr: fix documentation Jeevan B
2023-12-01 5:06 ` B, Jeevan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox