[PATCH i-g-t v6 0/7] Enable and Add new tests for DC3CO

[PATCH i-g-t v6 0/7] Enable and Add new tests for DC3CO

[Jeevan B]

Enable DC3CO tests for PSR/PR for display versions >= 35, add a new
test for DC3CO to validate frame drops, and test DC3CO with LOBF.

v3: Adds a test to verify DC3CO continues to function properly
    after a DC6 power cycle and rename function name in first patch.
v4: Add a new test to verify DC3CO continues to funct
v5: Addressed review comments, clarified platform support wording.
    Simplified PSR mode handling and fixed output-aware PSR checks.
    Cleaned up and aligned new DC3CO test flows and guards.
v6: Addressed review comments.

Jeevan B (7):
  tests: s/check_dc_counter/assert_dc_counter
  tests/intel/kms_pm_dc: Replace require with proper assertion
  tests/intel/kms_pm_dc: Enable DC3CO test for PSR2/PR modes
  tests/kms_vrr: Add new test for DC3CO validation with LOBF
  tests/intel/kms_pm_dc: Add new test for dc3co framedrop validation
  tests/intel/kms_pm_dc: Add new test for DC3CO recovery after DC6
  tests/intel/kms_pm_dc: Add dc3co-vpb-framegap subtest

 tests/intel/kms_pm_dc.c | 292 +++++++++++++++++++++++++++++++++++++---
 tests/kms_vrr.c         |  34 +++++
 2 files changed, 309 insertions(+), 17 deletions(-)

-- 
2.43.0

[PATCH i-g-t v6 1/7] tests: s/check_dc_counter/assert_dc_counter

[Jeevan B]

Rename function name.

Signed-off-by: Jeevan B <jeevan.b@intel.com>
Reviewed-by: Mohammed Thasleem <mohammed.thasleem@intel.com>
---
 tests/intel/kms_pm_dc.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c
index 423a5c4a4..c8cfa300c 100644
--- a/tests/intel/kms_pm_dc.c
+++ b/tests/intel/kms_pm_dc.c
@@ -110,7 +110,7 @@ typedef struct {
 	bool runtime_suspend_disabled;
 } data_t;
 
-static void check_dc_counter(data_t *data, int dc_flag, uint32_t prev_dc_count);
+static void assert_dc_counter(data_t *data, int dc_flag, uint32_t prev_dc_count);
 
 static void set_output_on_pipe_b(data_t *data)
 {
@@ -257,7 +257,7 @@ static void create_color_fb(data_t *data, igt_fb_t *fb, color_t *fb_color)
 	paint_rectangles(data, data->mode, fb_color, fb);
 }
 
-static void check_dc_counter(data_t *data, int dc_flag, uint32_t prev_dc_count)
+static void assert_dc_counter(data_t *data, int dc_flag, uint32_t prev_dc_count)
 {
 	igt_assert_f(igt_dc_state_wait_entry(data->debugfs_fd, dc_flag, prev_dc_count),
 		     "%s state is not achieved\n%s:\n%s\n", igt_dc_state_name(dc_flag),
@@ -265,7 +265,7 @@ static void check_dc_counter(data_t *data, int dc_flag, uint32_t prev_dc_count)
 		     PWR_DOMAIN_INFO));
 }
 
-static void check_dc_counter_negative(data_t *data, int dc_flag, uint32_t prev_dc_count)
+static void assert_dc_counter_negative(data_t *data, int dc_flag, uint32_t prev_dc_count)
 {
 	igt_assert_f(!igt_dc_state_wait_entry(data->debugfs_fd, dc_flag, prev_dc_count),
 		     "%s state is achieved\n%s:\n%s\n", igt_dc_state_name(dc_flag),
@@ -346,7 +346,7 @@ static void test_dc5_retention_flops(data_t *data, int dc_flag)
 	set_output_on_pipe_b(data);
 	setup_primary(data);
 	igt_assert(psr_wait_entry(data->debugfs_fd, data->op_psr_mode, data->output));
-	check_dc_counter(data, dc_flag, dc_counter_before_psr);
+	assert_dc_counter(data, dc_flag, dc_counter_before_psr);
 	cleanup_dc_psr(data);
 }
 
@@ -360,7 +360,7 @@ static void test_dc_state_psr(data_t *data, int dc_flag)
 	setup_primary(data);
 	igt_require(!psr_disabled_check(data->debugfs_fd));
 	igt_assert(psr_wait_entry(data->debugfs_fd, data->op_psr_mode, data->output));
-	check_dc_counter(data, dc_flag, dc_counter_before_psr);
+	assert_dc_counter(data, dc_flag, dc_counter_before_psr);
 	psr_sink_error_check(data->debugfs_fd, data->op_psr_mode, data->output);
 	cleanup_dc_psr(data);
 }
@@ -439,7 +439,7 @@ static void test_dc_state_dpms(data_t *data, int dc_flag)
 	setup_dc_dpms(data);
 	dc_counter = igt_read_dc_counter(data->debugfs_fd, dc_flag);
 	dpms_off(data);
-	check_dc_counter(data, dc_flag, dc_counter);
+	assert_dc_counter(data, dc_flag, dc_counter);
 	dpms_on(data);
 	cleanup_dc_dpms(data);
 }
@@ -452,7 +452,7 @@ static void test_dc_state_dpms_negative(data_t *data, int dc_flag)
 	setup_dc_dpms(data);
 	dc_counter = igt_read_dc_counter(data->debugfs_fd, dc_flag);
 	dpms_on(data);
-	check_dc_counter_negative(data, dc_flag, dc_counter);
+	assert_dc_counter_negative(data, dc_flag, dc_counter);
 	cleanup_dc_dpms(data);
 }
 
-- 
2.43.0

[PATCH i-g-t v6 2/7] tests/intel/kms_pm_dc: Replace require with proper assertion

[Jeevan B]

The DC3CO video playback simulation test was incorrectly using require at
the end to check if DC3CO state was entered. This causes the test to be
marked as SKIP instead of FAIL when DC3CO doesn't work properly, hiding
real issues. So changing the call from require to assert.

Fixes: b89efa8048e58 ("tests/i915/i915_pm_dc: Check dc3co count to skip the test")
Signed-off-by: Jeevan B <jeevan.b@intel.com>
Reviewed-by: Mohammed Thasleem <mohammed.thasleem@intel.com>
---
 tests/intel/kms_pm_dc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c
index c8cfa300c..27fa5dc39 100644
--- a/tests/intel/kms_pm_dc.c
+++ b/tests/intel/kms_pm_dc.c
@@ -316,8 +316,7 @@ static void check_dc3co_with_videoplayback_like_load(data_t *data)
 		usleep(delay);
 	}
 
-	igt_require_f(igt_dc_state_wait_entry(data->debugfs_fd, IGT_INTEL_CHECK_DC3CO,
-					      dc3co_prev_cnt), "dc3co-vpb-simulation not enabled\n");
+	assert_dc_counter(data, IGT_INTEL_CHECK_DC3CO, dc3co_prev_cnt);
 }
 
 static void setup_dc3co(data_t *data)
-- 
2.43.0

[PATCH i-g-t v6 3/7] tests/intel/kms_pm_dc: Enable DC3CO test for PSR2/PR modes

[Jeevan B]

Enable DC3CO with PSR2/PR mode on TGL and for platforms with
display version greater than 35.

v2: Fix debug, remove trailing dash and merge mode and char to
    single strcut array.
v3: Minor cosmetic changes.
v4: Update commit message, use data->op_psr_mode directly, keep
    psr_wait_entry, and refresh dc3co description to cover PSR2/PR.

Signed-off-by: Jeevan B <jeevan.b@intel.com>
Reviewed-by: Mohammed Thasleem <mohammed.thasleem@intel.com>
---
 tests/intel/kms_pm_dc.c | 45 ++++++++++++++++++++++++++++++++---------
 1 file changed, 36 insertions(+), 9 deletions(-)

diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c
index 27fa5dc39..96c96e2db 100644
--- a/tests/intel/kms_pm_dc.c
+++ b/tests/intel/kms_pm_dc.c
@@ -48,8 +48,8 @@
 
 /**
  * SUBTEST: dc3co-vpb-simulation
- * Description: Make sure that system enters DC3CO when PSR2 is active and system
- *              is in SLEEP state
+ * Description: Make sure that system enters DC3CO when PSR2 or PR is active and
+ *              system is in SLEEP state
  *
  * SUBTEST: dc5-dpms
  * Description: Validate display engine entry to DC5 state while all connectors's
@@ -110,6 +110,11 @@ typedef struct {
 	bool runtime_suspend_disabled;
 } data_t;
 
+struct dc3co_test_mode {
+	enum psr_mode mode;
+	const char *name;
+};
+
 static void assert_dc_counter(data_t *data, int dc_flag, uint32_t prev_dc_count);
 
 static void set_output_on_pipe_b(data_t *data)
@@ -323,7 +328,8 @@ static void setup_dc3co(data_t *data)
 {
 	psr_enable(data->drm_fd, data->debugfs_fd, data->op_psr_mode, data->output);
 	igt_require_f(psr_wait_entry(data->debugfs_fd, data->op_psr_mode, data->output),
-		      "PSR2 is not enabled\n");
+		      "%s is not enabled\n",
+		      data->op_psr_mode == PSR_MODE_2 ? "PSR2" : "Panel Replay");
 }
 
 static void test_dc3co_vpb_simulation(data_t *data)
@@ -658,12 +664,33 @@ int igt_main()
 	}
 
 	igt_describe("In this test we make sure that system enters DC3CO "
-		     "when PSR2 is active and system is in SLEEP state");
-	igt_subtest("dc3co-vpb-simulation") {
-		data.op_psr_mode = PSR_MODE_2;
-		igt_require(psr_sink_support(data.drm_fd, data.debugfs_fd,
-					     data.op_psr_mode, NULL));
-		test_dc3co_vpb_simulation(&data);
+			"when PSR2 or PR is active and system is in SLEEP state");
+	igt_subtest_with_dynamic("dc3co-vpb-simulation") {
+		static const struct dc3co_test_mode dc3co_modes[] = {
+			{ PSR_MODE_2, "psr2" },
+			{ PR_MODE,    "pr"   },
+		};
+
+		for (int i = 0; i < ARRAY_SIZE(dc3co_modes); i++) {
+			const char *name = dc3co_modes[i].name;
+			data.op_psr_mode = dc3co_modes[i].mode;
+
+			igt_dynamic_f("%s", name) {
+				igt_require(psr_sink_support(data.drm_fd,
+							     data.debugfs_fd,
+							     data.op_psr_mode, NULL));
+
+				if (data.op_psr_mode == PSR_MODE_2)
+					igt_require_f(IS_TIGERLAKE(data.devid) ||
+						      intel_display_ver(data.devid) >= 35,
+						      "Platform does not support DC3CO with PSR2\n");
+				else
+					igt_require_f(intel_display_ver(data.devid) >= 35,
+						      "Platform does not support DC3CO with Panel Replay\n");
+
+				test_dc3co_vpb_simulation(&data);
+			}
+		}
 	}
 
 	igt_describe("This test validates display engine entry to DC5 state "
-- 
2.43.0

[PATCH i-g-t v6 4/7] tests/kms_vrr: Add new test for DC3CO validation with LOBF

[Jeevan B]

Add lobf-dc3co subtest to validate DC3CO entry during link-off
between frames.

v2: Fix the flow logic.

Signed-off-by: Jeevan B <jeevan.b@intel.com>
Reviewed-by: Mohammed Thasleem <mohammed.thasleem@intel.com>
---
 tests/kms_vrr.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/tests/kms_vrr.c b/tests/kms_vrr.c
index 6043d40f1..82eb8554a 100644
--- a/tests/kms_vrr.c
+++ b/tests/kms_vrr.c
@@ -29,6 +29,7 @@
  */
 
 #include "igt.h"
+#include "igt_pm.h"
 #include "igt_psr.h"
 #include "i915/intel_drrs.h"
 #include "sw_sync.h"
@@ -76,6 +77,9 @@
  *
  * SUBTEST: negative-basic
  * Description: Make sure that VRR should not be enabled on the Non-VRR panel.
+ *
+ * SUBTEST: lobf-dc3co
+ * Description: Test DC3CO entry during LOBF.
  */
 
 #define NSECS_PER_SEC (1000000000ull)
@@ -873,6 +877,25 @@ test_lobf(data_t *data, igt_crtc_t *crtc, igt_output_t *output,
 	igt_assert_f(lobf_enabled, "LOBF not enabled\n");
 }
 
+static void test_lobf_dc3co(data_t *data, igt_crtc_t *crtc,
+			    igt_output_t *output, uint32_t flags)
+{
+	unsigned long dc3co_count_before, dc3co_count_after;
+
+	dc3co_count_before = igt_read_dc_counter(data->debugfs_fd,
+						 IGT_INTEL_CHECK_DC3CO);
+
+	test_lobf(data, crtc, output, flags);
+
+	dc3co_count_after = igt_read_dc_counter(data->debugfs_fd,
+						IGT_INTEL_CHECK_DC3CO);
+
+	igt_assert_f(dc3co_count_after > dc3co_count_before,
+		     "DC3CO should be entered during link-off periods. "
+		     "Before: %lu, After: %lu\n",
+		     dc3co_count_before, dc3co_count_after);
+}
+
 static void test_cleanup(data_t *data, igt_crtc_t *crtc, igt_output_t *output)
 {
 	igt_crtc_set_prop_value(crtc,
@@ -1112,6 +1135,17 @@ int igt_main_args("drs:", long_opts, help_str, opt_handler, &data)
 
 			run_vrr_test(&data, test_lobf, TEST_LINK_OFF);
 		}
+
+		igt_describe("This test validates DC3CO entry during LOBF (Link-Off Between "
+			     "Frames) periods while VRR is active and PSR is disabled.");
+
+		igt_subtest_with_dynamic("lobf-dc3co") {
+			igt_require(intel_display_ver(intel_get_drm_devid(data.drm_fd)) >= 35);
+
+			igt_require_dc_counter(data.debugfs_fd, IGT_INTEL_CHECK_DC3CO);
+
+			run_vrr_test(&data, test_lobf_dc3co, TEST_LINK_OFF);
+		}
 	}
 
 	igt_fixture() {
-- 
2.43.0

[PATCH i-g-t v6 5/7] tests/intel/kms_pm_dc: Add new test for dc3co framedrop validation

[Jeevan B]

Add a new subtest to validate that no frame drops occur during
DC3CO entry, ensuring that no frame drops are detected and DC3CO
is successfully triggered during the test.

v2: update check_dc3co_framedrop for detecting frame drops via
    drmWaitVBlank vblank sequence numbers, checks DC3CO counter
    to confirm entry and cast variable 'delay'.
v3: Rename function name from check_dc3co* to detect_dc3co*.

Signed-off-by: Jeevan B <jeevan.b@intel.com>
---
 tests/intel/kms_pm_dc.c | 108 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 108 insertions(+)

diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c
index 96c96e2db..4497cffb7 100644
--- a/tests/intel/kms_pm_dc.c
+++ b/tests/intel/kms_pm_dc.c
@@ -51,6 +51,10 @@
  * Description: Make sure that system enters DC3CO when PSR2 or PR is active and
  *              system is in SLEEP state
  *
+ * SUBTEST: dc3co-framedrop-check
+ * Description: Verify that DC3CO entry does not cause frame drops and successfully
+ *              enters the power state
+ *
  * SUBTEST: dc5-dpms
  * Description: Validate display engine entry to DC5 state while all connectors's
  *              DPMS property set to OFF
@@ -342,6 +346,87 @@ static void test_dc3co_vpb_simulation(data_t *data)
 	cleanup_dc3co_fbs(data);
 }
 
+static void detect_dc3co_framedrop(data_t *data)
+{
+	igt_plane_t *primary;
+	uint32_t dc3co_prev_cnt;
+	int delay;
+	int frame_count = 0, frame_drops = 0;
+	int max_count = 60;
+	bool dc3co_flag = false;
+	bool front = false;
+	struct drm_event_vblank ev;
+	uint64_t last_flip_ns = 0, cur_flip_ns;
+	uint64_t frame_time_ns;
+
+	igt_require_f(data->mode->vrefresh != 0, "Invalid vrefresh rate of 0\n");
+
+	frame_time_ns = UINT64_C(1000000000) / data->mode->vrefresh;
+
+	primary = igt_output_get_plane_type(data->output, DRM_PLANE_TYPE_PRIMARY);
+	igt_plane_set_fb(primary, NULL);
+	igt_display_commit(&data->display);
+
+	dc3co_prev_cnt = igt_read_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC3CO);
+
+	delay = (int)(1.5 * (1000000 / data->mode->vrefresh));
+
+	igt_plane_set_fb(primary, &data->fb_rgb);
+	igt_assert_eq(igt_display_try_commit_atomic(&data->display,
+						    DRM_MODE_ATOMIC_NONBLOCK |
+						    DRM_MODE_PAGE_FLIP_EVENT,
+						    data), 0);
+	igt_assert_eq(read(data->drm_fd, &ev, sizeof(ev)), sizeof(ev));
+	last_flip_ns = (uint64_t)ev.tv_sec * UINT64_C(1000000000) +
+		       (uint64_t)ev.tv_usec * 1000;
+
+	while (frame_count < max_count) {
+		front = !front;
+		igt_plane_set_fb(primary, front ? &data->fb_rgr : &data->fb_rgb);
+		usleep(delay);
+
+		igt_assert_eq(igt_display_try_commit_atomic(&data->display,
+						    DRM_MODE_ATOMIC_NONBLOCK |
+						    DRM_MODE_PAGE_FLIP_EVENT,
+						    data), 0);
+
+		igt_set_timeout(2, "Waiting for flip event\n");
+		igt_assert_eq(read(data->drm_fd, &ev, sizeof(ev)), sizeof(ev));
+		igt_reset_timeout();
+
+		cur_flip_ns = (uint64_t)ev.tv_sec * UINT64_C(1000000000) +
+			      (uint64_t)ev.tv_usec * 1000;
+
+		if (last_flip_ns != 0 &&
+		    (cur_flip_ns - last_flip_ns) > 2 * frame_time_ns)
+			frame_drops++;
+
+		last_flip_ns = cur_flip_ns;
+
+		if (!dc3co_flag &&
+		    igt_read_dc_counter(data->debugfs_fd,
+					IGT_INTEL_CHECK_DC3CO) > dc3co_prev_cnt)
+			dc3co_flag = true;
+
+		frame_count++;
+	}
+
+	igt_assert_f(dc3co_flag, "DC3CO was not entered during the test\n");
+	igt_assert_f(frame_drops == 0,
+		     "Frame drops detected: %d drops out of %d frames\n",
+		     frame_drops, frame_count);
+}
+
+static void test_dc3co_framedrop(data_t *data)
+{
+	igt_require_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC3CO);
+	setup_output(data);
+	setup_dc3co(data);
+	setup_videoplayback(data);
+	detect_dc3co_framedrop(data);
+	cleanup_dc3co_fbs(data);
+}
+
 static void test_dc5_retention_flops(data_t *data, int dc_flag)
 {
 	uint32_t dc_counter_before_psr;
@@ -693,6 +778,29 @@ int igt_main()
 		}
 	}
 
+	igt_describe("Validate that no frame drops occur during DC3CO entry "
+			     "while alternating framebuffers with PSR2 or Panel Replay active");
+	igt_subtest_with_dynamic("dc3co-framedrop-check") {
+		igt_dynamic("psr2") {
+			data.op_psr_mode = PSR_MODE_2;
+			igt_require(psr_sink_support(data.drm_fd, data.debugfs_fd,
+					     data.op_psr_mode, NULL));
+			igt_require_f(IS_TIGERLAKE(data.devid) ||
+				      intel_display_ver(data.devid) >= 35,
+				      "Platform does not support DC3CO with PSR2\n");
+			test_dc3co_framedrop(&data);
+		}
+
+		igt_dynamic("pr") {
+			data.op_psr_mode = PR_MODE;
+			igt_require(psr_sink_support(data.drm_fd, data.debugfs_fd,
+					     data.op_psr_mode, NULL));
+			igt_require_f(intel_display_ver(data.devid) >= 35,
+				      "Platform does not support DC3CO with Panel Replay\n");
+			test_dc3co_framedrop(&data);
+		}
+	}
+
 	igt_describe("This test validates display engine entry to DC5 state "
 		     "while PSR is active");
 	igt_subtest("dc5-psr") {
-- 
2.43.0

[PATCH i-g-t v6 6/7] tests/intel/kms_pm_dc: Add new test for DC3CO recovery after DC6

[Jeevan B]

Adds a test to verify DC3CO continues to function properly
after a DC6 power cycle.

v2: Use test_dc_state_dpms for the DPMS/DC6 cycle.
    Drop redundant PSR re-enable after DPMS/DC6.

Signed-off-by: Jeevan B <jeevan.b@intel.com>
---
 tests/intel/kms_pm_dc.c | 51 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c
index 4497cffb7..0f216d9eb 100644
--- a/tests/intel/kms_pm_dc.c
+++ b/tests/intel/kms_pm_dc.c
@@ -55,6 +55,11 @@
  * Description: Verify that DC3CO entry does not cause frame drops and successfully
  *              enters the power state
  *
+ * SUBTEST: dc3co-after-dc6
+ * Description: Verify DC3CO entry is still functional after a DC6 entry and
+ *              exit cycle, ensuring DC3CO is not broken by deeper power state
+ *              transitions.
+ *
  * SUBTEST: dc5-dpms
  * Description: Validate display engine entry to DC5 state while all connectors's
  *              DPMS property set to OFF
@@ -628,6 +633,25 @@ static int has_panels_without_dc_support(igt_display_t *display)
 	return external_panel;
 }
 
+static void test_dc3co_after_dc6(data_t *data)
+{
+	igt_require_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC3CO);
+	igt_require_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC6);
+
+	setup_output(data);
+
+	/* Enable PSR2/PR */
+	setup_dc3co(data);
+
+	/* Trigger a DC6 cycle through DPMS */
+	test_dc_state_dpms(data, IGT_INTEL_CHECK_DC6);
+
+	/* Verify DC3CO still works after DC6 */
+	setup_videoplayback(data);
+	check_dc3co_with_videoplayback_like_load(data);
+	cleanup_dc3co_fbs(data);
+}
+
 static void test_deep_pkgc_state(data_t *data)
 {
 	unsigned int pre_val = 0, cur_val = 0;
@@ -801,6 +825,33 @@ int igt_main()
 		}
 	}
 
+	igt_describe("Verify DC3CO entry is still functional after a DC6 entry "
+		     "and exit cycle");
+	igt_subtest_with_dynamic("dc3co-after-dc6") {
+		igt_dynamic("psr2") {
+			data.op_psr_mode = PSR_MODE_2;
+			igt_require(psr_sink_support(data.drm_fd, data.debugfs_fd,
+					     data.op_psr_mode, NULL));
+			igt_require_f(IS_TIGERLAKE(data.devid) ||
+				      intel_display_ver(data.devid) >= 35,
+				      "Platform does not support DC3CO with PSR2\n");
+			igt_require_f(igt_pm_pc8_plus_residencies_enabled(data.msr_fd),
+				      "PC8+ residencies not supported\n");
+			test_dc3co_after_dc6(&data);
+		}
+
+		igt_dynamic("pr") {
+			data.op_psr_mode = PR_MODE;
+			igt_require(psr_sink_support(data.drm_fd, data.debugfs_fd,
+					     data.op_psr_mode, NULL));
+			igt_require_f(intel_display_ver(data.devid) >= 35,
+				      "Platform does not support DC3CO with Panel Replay\n");
+			igt_require_f(igt_pm_pc8_plus_residencies_enabled(data.msr_fd),
+				      "PC8+ residencies not supported\n");
+			test_dc3co_after_dc6(&data);
+		}
+	}
+
 	igt_describe("This test validates display engine entry to DC5 state "
 		     "while PSR is active");
 	igt_subtest("dc5-psr") {
-- 
2.43.0

[PATCH i-g-t v6 7/7] tests/intel/kms_pm_dc: Add dc3co-vpb-framegap subtest

[Jeevan B]

Add a new subtest to validate DC3CO counter increments across
frame gaps exceeding the threshold during a video-like workload
with PSR2 enabled.

Signed-off-by: Jeevan B <jeevan.b@intel.com>
---
 tests/intel/kms_pm_dc.c | 73 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c
index 0f216d9eb..4ce7c94be 100644
--- a/tests/intel/kms_pm_dc.c
+++ b/tests/intel/kms_pm_dc.c
@@ -60,6 +60,10 @@
  *              exit cycle, ensuring DC3CO is not broken by deeper power state
  *              transitions.
  *
+ * SUBTEST: dc3co-vpb-framegap
+ * Description: Validate DC3CO counter increments before and after a delay greater
+ *              than 6 frame gaps during video-like load with PSR2 active.
+ *
  * SUBTEST: dc5-dpms
  * Description: Validate display engine entry to DC5 state while all connectors's
  *              DPMS property set to OFF
@@ -432,6 +436,64 @@ static void test_dc3co_framedrop(data_t *data)
 	cleanup_dc3co_fbs(data);
 }
 
+static void check_dc3co_with_framegap_load(data_t *data)
+{
+	igt_plane_t *primary;
+	uint32_t dc3co_cnt_before, dc3co_cnt_after_gap;
+	int delay, long_gap_us;
+	time_t secs = 3;
+	time_t start_time;
+
+	primary = igt_output_get_plane_type(data->output, DRM_PLANE_TYPE_PRIMARY);
+	igt_plane_set_fb(primary, NULL);
+
+	delay = 1.5 * ((1000 * 1000) / data->mode->vrefresh);
+
+	dc3co_cnt_before = igt_read_dc_counter(data->debugfs_fd,
+			   IGT_INTEL_CHECK_DC3CO);
+	start_time = time(NULL);
+	while (time(NULL) - start_time < secs) {
+		igt_plane_set_fb(primary, &data->fb_rgb);
+		igt_display_commit(&data->display);
+		usleep(delay);
+
+		igt_plane_set_fb(primary, &data->fb_rgr);
+		igt_display_commit(&data->display);
+		usleep(delay);
+	}
+
+	assert_dc_counter(data, IGT_INTEL_CHECK_DC3CO, dc3co_cnt_before);
+
+	long_gap_us = 7 * ((1000 * 1000) / data->mode->vrefresh);
+	usleep(long_gap_us);
+
+	dc3co_cnt_after_gap = igt_read_dc_counter(data->debugfs_fd,
+						  IGT_INTEL_CHECK_DC3CO);
+	start_time = time(NULL);
+	while (time(NULL) - start_time < secs) {
+		igt_plane_set_fb(primary, &data->fb_rgb);
+		igt_display_commit(&data->display);
+		usleep(delay);
+
+		igt_plane_set_fb(primary, &data->fb_rgr);
+		igt_display_commit(&data->display);
+		usleep(delay);
+	}
+
+	assert_dc_counter(data, IGT_INTEL_CHECK_DC3CO, dc3co_cnt_after_gap);
+}
+
+static void test_dc3co_vpb_framegap(data_t *data)
+{
+	igt_require_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC3CO);
+	data->op_psr_mode = PSR_MODE_2;
+	setup_output(data);
+	setup_dc3co(data);
+	setup_videoplayback(data);
+	check_dc3co_with_framegap_load(data);
+	cleanup_dc3co_fbs(data);
+}
+
 static void test_dc5_retention_flops(data_t *data, int dc_flag)
 {
 	uint32_t dc_counter_before_psr;
@@ -852,6 +914,17 @@ int igt_main()
 		}
 	}
 
+	igt_describe("Validate DC3CO counter increments before and after a delay "
+		     "greater than 6 frame gaps during video-like load with PSR2 active");
+	igt_subtest("dc3co-vpb-framegap") {
+		igt_require(psr_sink_support(data.drm_fd, data.debugfs_fd,
+					     PSR_MODE_2, NULL));
+		igt_require_f(IS_TIGERLAKE(data.devid) ||
+			      intel_display_ver(data.devid) >= 35,
+			      "Platform does not support DC3CO with PSR2\n");
+		test_dc3co_vpb_framegap(&data);
+	}
+
 	igt_describe("This test validates display engine entry to DC5 state "
 		     "while PSR is active");
 	igt_subtest("dc5-psr") {
-- 
2.43.0

✓ i915.CI.BAT: success for Enable and Add new tests for DC3CO

[Patchwork]

[-- Attachment #1: Type: text/plain, Size: 4433 bytes --]

== Series Details ==

Series: Enable and Add new tests for DC3CO
URL   : https://patchwork.freedesktop.org/series/166666/
State : success

== Summary ==

CI Bug Log - changes from IGT_8917 -> IGTPW_15194
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_15194/index.html

Participating hosts (41 -> 40)
------------------------------

  Additional (1): fi-skl-6600u 
  Missing    (2): bat-dg2-13 fi-snb-2520m 

Known issues
------------

  Here are the changes found in IGTPW_15194 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@dmabuf@all-tests:
    - bat-arlh-2:         NOTRUN -> [SKIP][1] ([i915#11346] / [i915#15931])
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_15194/bat-arlh-2/igt@dmabuf@all-tests.html

  * igt@gem_huc_copy@huc-copy:
    - fi-skl-6600u:       NOTRUN -> [SKIP][2] ([i915#2190])
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_15194/fi-skl-6600u/igt@gem_huc_copy@huc-copy.html

  * igt@gem_lmem_swapping@random-engines:
    - fi-skl-6600u:       NOTRUN -> [SKIP][3] ([i915#4613]) +3 other tests skip
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_15194/fi-skl-6600u/igt@gem_lmem_swapping@random-engines.html

  * igt@kms_dsc@dsc-basic:
    - fi-skl-6600u:       NOTRUN -> [SKIP][4] +11 other tests skip
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_15194/fi-skl-6600u/igt@kms_dsc@dsc-basic.html

  
#### Possible fixes ####

  * igt@i915_selftest@live:
    - bat-dg2-8:          [DMESG-FAIL][5] ([i915#12061]) -> [PASS][6] +1 other test pass
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_8917/bat-dg2-8/igt@i915_selftest@live.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_15194/bat-dg2-8/igt@i915_selftest@live.html
    - bat-arlh-2:         [INCOMPLETE][7] ([i915#15978]) -> [PASS][8]
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_8917/bat-arlh-2/igt@i915_selftest@live.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_15194/bat-arlh-2/igt@i915_selftest@live.html

  * igt@i915_selftest@live@guc_multi_lrc:
    - bat-arlh-2:         [INCOMPLETE][9] -> [PASS][10]
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_8917/bat-arlh-2/igt@i915_selftest@live@guc_multi_lrc.html
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_15194/bat-arlh-2/igt@i915_selftest@live@guc_multi_lrc.html

  * igt@i915_selftest@live@workarounds:
    - bat-arls-5:         [DMESG-FAIL][11] ([i915#12061]) -> [PASS][12] +1 other test pass
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_8917/bat-arls-5/igt@i915_selftest@live@workarounds.html
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_15194/bat-arls-5/igt@i915_selftest@live@workarounds.html
    - bat-dg2-14:         [DMESG-FAIL][13] ([i915#12061]) -> [PASS][14] +1 other test pass
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_8917/bat-dg2-14/igt@i915_selftest@live@workarounds.html
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_15194/bat-dg2-14/igt@i915_selftest@live@workarounds.html
    - bat-mtlp-9:         [DMESG-FAIL][15] ([i915#12061]) -> [PASS][16] +1 other test pass
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_8917/bat-mtlp-9/igt@i915_selftest@live@workarounds.html
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_15194/bat-mtlp-9/igt@i915_selftest@live@workarounds.html

  
  [i915#11346]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11346
  [i915#12061]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12061
  [i915#15931]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15931
  [i915#15978]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15978
  [i915#2190]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/2190
  [i915#4613]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/4613


Build changes
-------------

  * CI: CI-20190529 -> None
  * IGT: IGT_8917 -> IGTPW_15194

  CI-20190529: 20190529
  CI_DRM_18494: 25de7fb53bca724e7864b6bd8280aa1ec59429e3 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGTPW_15194: b84150b67cf27cd0cd8707f6b95159ab7eee8c4a @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
  IGT_8917: 65d691069f26fc2a42c79e2364241320b85d48bc @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_15194/index.html

[-- Attachment #2: Type: text/html, Size: 5442 bytes --]

✓ Xe.CI.BAT: success for Enable and Add new tests for DC3CO

[Patchwork]

[-- Attachment #1: Type: text/plain, Size: 1551 bytes --]

== Series Details ==

Series: Enable and Add new tests for DC3CO
URL   : https://patchwork.freedesktop.org/series/166666/
State : success

== Summary ==

CI Bug Log - changes from XEIGT_8917_BAT -> XEIGTPW_15194_BAT
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  

Participating hosts (13 -> 13)
------------------------------

  No changes in participating hosts

Known issues
------------

  Here are the changes found in XEIGTPW_15194_BAT that come from known issues:

### IGT changes ###

#### Possible fixes ####

  * igt@xe_waitfence@reltime:
    - bat-bmg-2:          [FAIL][1] -> [PASS][2]
   [1]: https://intel-gfx-ci.01.org/tree/intel-xe/IGT_8917/bat-bmg-2/igt@xe_waitfence@reltime.html
   [2]: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_15194/bat-bmg-2/igt@xe_waitfence@reltime.html

  


Build changes
-------------

  * IGT: IGT_8917 -> IGTPW_15194
  * Linux: xe-5067-b9819223b7e92173091b674c2212252b99ea6c4b -> xe-5068-25de7fb53bca724e7864b6bd8280aa1ec59429e3

  IGTPW_15194: b84150b67cf27cd0cd8707f6b95159ab7eee8c4a @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
  IGT_8917: 65d691069f26fc2a42c79e2364241320b85d48bc @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
  xe-5067-b9819223b7e92173091b674c2212252b99ea6c4b: b9819223b7e92173091b674c2212252b99ea6c4b
  xe-5068-25de7fb53bca724e7864b6bd8280aa1ec59429e3: 25de7fb53bca724e7864b6bd8280aa1ec59429e3

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/intel-xe/IGTPW_15194/index.html

[-- Attachment #2: Type: text/html, Size: 2134 bytes --]