Igt-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH i-g-t,v2 1/2] tests/intel: Add kms_hdmi_audio_bw test
@ 2026-09-08  6:25 Swati Sharma
  2026-09-08  6:25 ` [PATCH i-g-t, v2 2/2] tests/intel: Add mode-rejected-max-dotclock subtest to kms_cdclk Swati Sharma
                   ` (6 more replies)
  0 siblings, 7 replies; 8+ messages in thread
From: Swati Sharma @ 2026-09-08  6:25 UTC (permalink / raw)
  To: igt-dev; +Cc: chaitanya.kumar.borah, Swati Sharma

Add a new IGT test to validate HDMI TMDS audio bandwidth
constraints under varying horizontal blanking intervals, bits per
color component, and audio channel counts.

The test injects EDIDs declaring all seven CEA PCM sample rates
from 32 kHz through 192 kHz and observes which rates the driver
exposes through ELD (EDID-Like Data). It also validates HDMI audio
state and rate preservation across suspend-to-memory,
suspend-to-disk, and DPMS display power transitions.

The bandwidth checks compare the modeled packet requirement with
the rates exposed in ELD for each configuration. The test covers
both hblank=160 and hblank=80 modes, 8/10/12 BPC, and 2/8 audio
channels.

Subtests:
- audio-bw-hblank160: Validate audio bandwidth with 160-pixel
  horizontal blanking.
- audio-bw-hblank80: Validate audio bandwidth with 80-pixel
  horizontal blanking.
- suspend-mem-audio-recovery: Validate recovery after suspend to
  memory.
- suspend-disk-audio-recovery: Validate recovery after suspend to
  disk (hibernate).
- dpms-audio-recovery: Validate recovery across a DPMS off/on cycle.

v2:
- Remove the unused xe query include and rename the HDMI VSDB
  local to vsdb.
- Document HDMI VSDB values, the single-SAD ELD assumption, and
  asynchronous ELD polling.
- Use accurate 88.2k/176.4k labels and validate both ELD
  over-pruning and under-pruning.
- Make speaker allocation explicit for stereo and 8-channel audio.
- Consolidate suspend recovery paths and align suspend names and
  documentation with SUSPEND_STATE_MEM and SUSPEND_STATE_DISK.
- Rename bandwidth subtests around their hblank inputs.
- Rename the DPMS recovery subtest to match its off/on operation.

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Assisted-by: GitHub Copilot:Claude Opus 4.6
---
 tests/intel/kms_hdmi_audio_bw.c | 598 ++++++++++++++++++++++++++++++++
 tests/meson.build               |   1 +
 2 files changed, 599 insertions(+)
 create mode 100644 tests/intel/kms_hdmi_audio_bw.c

diff --git a/tests/intel/kms_hdmi_audio_bw.c b/tests/intel/kms_hdmi_audio_bw.c
new file mode 100644
index 000000000..c6b052744
--- /dev/null
+++ b/tests/intel/kms_hdmi_audio_bw.c
@@ -0,0 +1,598 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2026 Intel Corporation
+ */
+
+/**
+ * TEST: kms hdmi audio bw
+ * Category: Display
+ * Description: Validate HDMI TMDS audio bandwidth constraints by injecting
+ *              EDIDs with all sample rates declared and observing which rates
+ *              the driver exposes (via ELD) under varying BPC / channel /
+ *              hblank configurations.
+ * Driver requirement: i915, xe
+ * Mega feature: Display Audio
+ */
+
+#include "config.h"
+
+#include <math.h>
+#include <string.h>
+
+#include "igt.h"
+#include "igt_edid.h"
+#include "igt_eld.h"
+#include "igt_aux.h"
+
+/**
+ * SUBTEST: audio-bw-hblank160
+ * Description: Validate HDMI audio bandwidth with 160-pixel horizontal
+ *              blanking across BPC and channel combinations.
+ *
+ * SUBTEST: audio-bw-hblank80
+ * Description: Validate HDMI audio bandwidth with 80-pixel horizontal
+ *              blanking across BPC and channel combinations.
+ *
+ * SUBTEST: suspend-%s-audio-recovery
+ * Description: Validate audio state restoration after %arg[1] with
+ *              constrained hblank=80 and 12bpc.
+ *
+ * arg[1]:
+ *
+ * @mem: Suspend to memory, respecting the system's mem_sleep default
+ * @disk: Suspend to disk (hibernate)
+ *
+ * SUBTEST: dpms-audio-recovery
+ * Description: Validate audio state restoration after a DPMS off/on cycle
+ *              with constrained hblank=80 and 12bpc.
+ */
+
+IGT_TEST_DESCRIPTION("Validate HDMI TMDS audio bandwidth constraints. "
+		      "EDIDs declare all sample rates (32k-192k); the test "
+		      "observes which rates survive in the ELD under "
+		      "constrained hblank timings.");
+
+typedef struct {
+	int drm_fd;
+	igt_display_t display;
+	igt_output_t *output;
+	igt_crtc_t *crtc;
+	struct igt_fb fb;
+} data_t;
+
+/* All sample rates declared in the EDID SAD */
+#define ALL_SAMPLE_RATES (CEA_SAD_SAMPLING_RATE_32KHZ | \
+			  CEA_SAD_SAMPLING_RATE_44KHZ | \
+			  CEA_SAD_SAMPLING_RATE_48KHZ | \
+			  CEA_SAD_SAMPLING_RATE_88KHZ | \
+			  CEA_SAD_SAMPLING_RATE_96KHZ | \
+			  CEA_SAD_SAMPLING_RATE_176KHZ | \
+			  CEA_SAD_SAMPLING_RATE_192KHZ)
+
+struct rate_info {
+	unsigned int flag;
+	const char *name;
+	int freq_hz;
+};
+
+static const struct rate_info rate_table[] = {
+	{ CEA_SAD_SAMPLING_RATE_32KHZ,  "32k",   32000 },
+	{ CEA_SAD_SAMPLING_RATE_44KHZ,  "44.1k", 44100 },
+	{ CEA_SAD_SAMPLING_RATE_48KHZ,  "48k",   48000 },
+	{ CEA_SAD_SAMPLING_RATE_88KHZ,  "88.2k", 88200 },
+	{ CEA_SAD_SAMPLING_RATE_96KHZ,  "96k",   96000 },
+	{ CEA_SAD_SAMPLING_RATE_176KHZ, "176.4k", 176400 },
+	{ CEA_SAD_SAMPLING_RATE_192KHZ, "192k",  192000 },
+};
+
+#define ACR_RATE_MAX		1500
+#define TOLERANCE_AUDIOCLK_PPM	1000
+#define TOLERANCE_PIXELCLK	0.005
+#define HBLANK_OVERHEAD_STD	30
+#define HBLANK_OVERHEAD_HDCP14	74
+#define DI_PACKET_SIZE		32
+
+static void rates_to_str(unsigned int rates, char *buf, size_t len)
+{
+	int pos = 0;
+
+	buf[0] = '\0';
+	for (int i = 0; i < ARRAY_SIZE(rate_table); i++) {
+		if (!(rates & rate_table[i].flag))
+			continue;
+		if (pos > 0)
+			pos += snprintf(buf + pos, len - pos, ",");
+		pos += snprintf(buf + pos, len - pos, "%s", rate_table[i].name);
+	}
+	if (pos == 0)
+		snprintf(buf, len, "none");
+}
+
+static const int bpc_values[] = { 8, 10, 12 };
+static const int channel_values[] = { 2, 8 };
+
+/*
+ * 1920x1080@60Hz CVT RB2 — hblank=80 (constrained)
+ * Available Packets/Line = FLOOR(((BPC/8)*80 - 74) / 32)
+ *   8bpc=0, 10bpc=0, 12bpc=1
+ */
+static const drmModeModeInfo mode_1080p_hblank80 = {
+	.clock = 133320,
+	.hdisplay = 1920,
+	.hsync_start = 1928,
+	.hsync_end = 1960,
+	.htotal = 2000,		/* hblank = 80 */
+	.vdisplay = 1080,
+	.vsync_start = 1097,
+	.vsync_end = 1105,
+	.vtotal = 1111,
+	.vrefresh = 60,
+	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.type = DRM_MODE_TYPE_DRIVER,
+	.name = "1920x1080",
+};
+
+/*
+ * 1920x1080@60Hz with hblank=160 (relaxed baseline)
+ * Enough hblank for audio at any BPC.
+ */
+static const drmModeModeInfo mode_1080p_hblank160 = {
+	.clock = 148500,
+	.hdisplay = 1920,
+	.hsync_start = 1968,
+	.hsync_end = 2000,
+	.htotal = 2080,		/* hblank = 160 */
+	.vdisplay = 1080,
+	.vsync_start = 1097,
+	.vsync_end = 1105,
+	.vtotal = 1111,
+	.vrefresh = 60,
+	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
+	.type = DRM_MODE_TYPE_DRIVER,
+	.name = "1920x1080",
+};
+
+static igt_output_t *find_hdmi_output(igt_display_t *display)
+{
+	igt_output_t *output;
+
+	for_each_connected_output(display, output) {
+		drmModeConnector *c = output->config.connector;
+
+		if (c->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
+		    c->connector_type == DRM_MODE_CONNECTOR_HDMIB)
+			return output;
+	}
+
+	return NULL;
+}
+
+static int hblank_of(const drmModeModeInfo *mode)
+{
+	return mode->htotal - mode->hdisplay;
+}
+
+/*
+ * Driver always reserves HDCP 1.4 rekey overhead (74 clocks) even when
+ * HDCP is not active: 30 (standard) + 44 (HDCP 1.4 rekey quiet period).
+ * FIXME: once driver exposes HDCP state, use 30 for no HDCP, 74 for HDCP 1.4.
+ */
+static int avail_pkts_per_line(int bpc, int hblank)
+{
+	int overhead = HBLANK_OVERHEAD_HDCP14;
+	int tb_blank = (bpc * hblank + 7) / 8; /* CEIL(hblank * bpc/8) */
+	int avail = (tb_blank - overhead) / DI_PACKET_SIZE;
+
+	return avail > 0 ? avail : 0;
+}
+
+/* Packets required per line for a given audio rate and channel layout */
+static int required_pkts_per_line(const drmModeModeInfo *mode, int freq_hz,
+				 int channels)
+{
+	double ap = (channels <= 2) ? 0.25 : 1.0;
+	double f_pixel_max = mode->clock * 1000.0 * (1 + TOLERANCE_PIXELCLK);
+	double t_line = mode->htotal / f_pixel_max;
+	double r_ap = ((freq_hz * ap) + (2 * ACR_RATE_MAX)) *
+		      (1 + TOLERANCE_AUDIOCLK_PPM / 1e6);
+
+	double avg_pkts = r_ap * t_line;
+
+	return (int)avg_pkts + (avg_pkts > (int)avg_pkts ? 1 : 0);
+}
+
+/*
+ * Build a CEA EDID declaring all 7 sample rates in the SAD.
+ * Deep-color flags in HDMI VSDB match the requested bpc.
+ */
+static const struct edid *
+build_edid(int bpc, int audio_channels)
+{
+	static unsigned char raw_edid[2 * EDID_BLOCK_SIZE];
+	struct edid *edid;
+	struct edid_ext *ext;
+	struct edid_cea *cea;
+	struct edid_cea_data_block *block;
+	struct cea_sad sad;
+	struct hdmi_vsdb vsdb;
+	struct cea_speaker_alloc speakers;
+	size_t offset = 0;
+
+	memset(raw_edid, 0, sizeof(raw_edid));
+	edid = (struct edid *)raw_edid;
+	memcpy(edid, igt_kms_get_base_edid(), sizeof(struct edid));
+	edid->extensions_len = 1;
+
+	ext = &edid->extensions[0];
+	cea = &ext->data.cea;
+
+	if (audio_channels > 0) {
+		cea_sad_init_pcm(&sad,
+				 audio_channels,
+				 ALL_SAMPLE_RATES,
+				 CEA_SAD_SAMPLE_SIZE_16 |
+				 CEA_SAD_SAMPLE_SIZE_24);
+		block = (struct edid_cea_data_block *)&cea->data[offset];
+		offset += edid_cea_data_block_set_sad(block, &sad, 1);
+	}
+
+	/* Use source physical address 1.0.0.0, as in the standard HDMI VSDB. */
+	memset(&vsdb, 0, sizeof(vsdb));
+	vsdb.src_phy_addr[0] = 0x10;
+	vsdb.src_phy_addr[1] = 0x00;
+	/* Advertise ACP/ISRC packet support and the HDMI 1.4 TMDS limit. */
+	vsdb.flags1 = HDMI_VSDB_SUPPORTS_AI;
+	vsdb.max_tdms_clock = 340000000 / (5 * 1000000); /* 340 MHz / 5 MHz */
+
+	switch (bpc) {
+	case 12:
+		vsdb.flags1 |= HDMI_VSDB_DC_36BIT;
+		/* fall through */
+	case 10:
+		vsdb.flags1 |= HDMI_VSDB_DC_30BIT;
+		/* fall through */
+	case 8:
+		break;
+	}
+
+	block = (struct edid_cea_data_block *)&cea->data[offset];
+	offset += edid_cea_data_block_set_hdmi_vsdb(block, &vsdb,
+	                                            sizeof(vsdb));
+
+	memset(&speakers, 0, sizeof(speakers));
+	speakers.speakers = CEA_SPEAKER_FRONT_LEFT_RIGHT;
+	if (audio_channels == 8)
+		speakers.speakers |= CEA_SPEAKER_FRONT_CENTER |
+					 CEA_SPEAKER_LFE |
+					 CEA_SPEAKER_REAR_LEFT_RIGHT |
+					 CEA_SPEAKER_REAR_LEFT_RIGHT_CENTER;
+	block = (struct edid_cea_data_block *)&cea->data[offset];
+	offset += edid_cea_data_block_set_speaker_alloc(block, &speakers);
+
+	edid_ext_set_cea(ext, offset, 0,
+			 EDID_CEA_BASIC_AUDIO | EDID_CEA_UNDERSCAN |
+			 EDID_CEA_YCBCR444 | EDID_CEA_YCBCR422);
+	edid_update_checksum(edid);
+
+	return edid;
+}
+
+static void force_edid_and_connector(data_t *data, const struct edid *edid)
+{
+	kmstest_force_edid(data->drm_fd, data->output->config.connector, edid);
+	igt_skip_on_f(!kmstest_force_connector(data->drm_fd,
+					       data->output->config.connector,
+					       FORCE_CONNECTOR_ON),
+		      "Could not force HDMI connector on\n");
+}
+
+static void cleanup_connector(data_t *data)
+{
+	if (data->output->pending_crtc) {
+		igt_plane_t *primary;
+
+		primary = igt_output_get_plane_type(data->output,
+						    DRM_PLANE_TYPE_PRIMARY);
+		igt_plane_set_fb(primary, NULL);
+		igt_output_set_crtc(data->output, NULL);
+		igt_display_commit2(&data->display, COMMIT_ATOMIC);
+	}
+
+	igt_remove_fb(data->drm_fd, &data->fb);
+
+	kmstest_force_connector(data->drm_fd,
+				data->output->config.connector,
+				FORCE_CONNECTOR_UNSPECIFIED);
+	kmstest_force_edid(data->drm_fd,
+			   data->output->config.connector, NULL);
+}
+
+static int try_modeset(data_t *data, const drmModeModeInfo *mode)
+{
+	igt_plane_t *primary;
+	int ret;
+
+	igt_display_reset(&data->display);
+
+	igt_output_set_crtc(data->output, data->crtc);
+	igt_output_override_mode(data->output, mode);
+
+	primary = igt_output_get_plane_type(data->output,
+					    DRM_PLANE_TYPE_PRIMARY);
+
+	igt_create_pattern_fb(data->drm_fd,
+			      mode->hdisplay, mode->vdisplay,
+			      DRM_FORMAT_XRGB8888, DRM_FORMAT_MOD_LINEAR,
+			      &data->fb);
+	igt_plane_set_fb(primary, &data->fb);
+
+	ret = igt_display_try_commit_atomic(&data->display,
+					    DRM_MODE_ATOMIC_ALLOW_MODESET,
+					    NULL);
+	if (ret) {
+		igt_plane_set_fb(primary, NULL);
+		igt_output_set_crtc(data->output, NULL);
+		igt_remove_fb(data->drm_fd, &data->fb);
+	}
+
+	return ret;
+}
+
+static bool audio_is_active(void)
+{
+	if (!eld_is_supported())
+		return false;
+
+	return eld_has_igt();
+}
+
+static void wait_for_eld(void)
+{
+	/* ELD creation is asynchronous; return as soon as it is available. */
+	igt_wait(eld_has_igt(), 200, 10);
+}
+
+static unsigned int get_eld_rates(void)
+{
+	struct eld_entry eld;
+
+	if (!eld_get_igt(&eld))
+		return 0;
+
+	if (eld.sads_len == 0)
+		return 0;
+
+	/* build_edid() currently adds exactly one SAD; use its rates. */
+	return eld.sads[0].rates;
+}
+
+static void log_eld_rates(unsigned int declared, unsigned int eld_rates)
+{
+	char decl_str[128], eld_str[128], pruned_str[128];
+	unsigned int pruned = declared & ~eld_rates;
+
+	rates_to_str(declared, decl_str, sizeof(decl_str));
+	rates_to_str(eld_rates, eld_str, sizeof(eld_str));
+	rates_to_str(pruned, pruned_str, sizeof(pruned_str));
+
+	igt_info("    SAD declared: %s\n", decl_str);
+	igt_info("    ELD reports:  %s\n", eld_str);
+	if (pruned)
+		igt_info("    Pruned:       %s\n", pruned_str);
+}
+
+static void assert_per_rate(const drmModeModeInfo *mode, int channels,
+			   int pkts_avail, unsigned int eld_rates)
+{
+	for (int i = 0; i < ARRAY_SIZE(rate_table); i++) {
+		int req = required_pkts_per_line(mode, rate_table[i].freq_hz,
+						 channels);
+		bool in_eld = eld_rates & rate_table[i].flag;
+
+		igt_assert_f(in_eld == (req <= pkts_avail),
+				     "%s: req=%d avail=%d ELD=%s, expected=%s\n",
+				     rate_table[i].name, req, pkts_avail,
+				     in_eld ? "present" : "missing",
+				     req <= pkts_avail ? "present" : "missing");
+	}
+}
+
+static void log_per_rate_analysis(const drmModeModeInfo *mode,
+				  int bpc, int channels,
+				  int pkts_avail, unsigned int eld_rates)
+{
+	const char *layout = (channels <= 2) ? "L0" : "L1";
+
+	igt_info("    %-6s %-3s  pkts: avail=%d\n",
+		 "Rate", layout, pkts_avail);
+
+	for (int i = 0; i < ARRAY_SIZE(rate_table); i++) {
+		int req = required_pkts_per_line(mode, rate_table[i].freq_hz,
+						 channels);
+		const char *expect = (req <= pkts_avail && pkts_avail > 0) ?
+				     "fit" : "NO";
+		const char *eld_has = (eld_rates & rate_table[i].flag) ?
+				     "yes" : "no";
+
+		igt_info("      %5s: req=%d fit=%s  (ELD: %s)\n",
+			 rate_table[i].name, req, expect, eld_has);
+	}
+}
+
+/* Run the BPC × channels matrix for a given mode/hblank. */
+static void test_audio_bw_matrix(data_t *data, const drmModeModeInfo *mode)
+{
+	int hblank = hblank_of(mode);
+
+	igt_info("=== Audio BW matrix: %s hblank=%d ===\n",
+		 mode->name, hblank);
+
+	for (int b = 0; b < ARRAY_SIZE(bpc_values); b++) {
+		int bpc = bpc_values[b];
+
+		for (int c = 0; c < ARRAY_SIZE(channel_values); c++) {
+			int channels = channel_values[c];
+			const struct edid *edid;
+			int pkts, ret;
+			bool audio;
+			unsigned int eld_rates;
+
+			edid = build_edid(bpc, channels);
+			force_edid_and_connector(data, edid);
+
+			igt_output_set_prop_value(data->output,
+						  IGT_CONNECTOR_MAX_BPC, bpc);
+
+			pkts = avail_pkts_per_line(bpc, hblank);
+
+			igt_info("\n  %dbpc %dch hblank=%d avail_pkts=%d\n",
+				 bpc, channels, hblank, pkts);
+
+			ret = try_modeset(data, mode);
+
+			if (ret) {
+				igt_info("    modeset: REJECTED\n");
+				cleanup_connector(data);
+				continue;
+			}
+
+			wait_for_eld();
+
+			audio = audio_is_active();
+			eld_rates = audio ? get_eld_rates() : 0;
+
+			igt_info("    modeset: OK\n");
+			igt_info("    audio:   %s\n", audio ? "active" : "inactive");
+
+			igt_assert_f(!(pkts == 0 && audio),
+				     "Audio active with 0 available packets\n");
+			igt_assert_f(!(pkts > 0 && !audio),
+				     "Audio inactive with %d available packets\n",
+				     pkts);
+
+			if (audio) {
+				log_eld_rates(ALL_SAMPLE_RATES, eld_rates);
+				assert_per_rate(mode, channels, pkts,
+						eld_rates);
+			}
+
+			log_per_rate_analysis(mode, bpc, channels,
+					      pkts, eld_rates);
+
+			cleanup_connector(data);
+		}
+	}
+
+	igt_info("\n=== End matrix ===\n");
+}
+
+static void test_audio_bw_supported(data_t *data)
+{
+	test_audio_bw_matrix(data, &mode_1080p_hblank160);
+}
+
+static void test_audio_bw_pruned(data_t *data)
+{
+	test_audio_bw_matrix(data, &mode_1080p_hblank80);
+}
+
+static void test_audio_recovery(data_t *data, enum igt_suspend_state state,
+				bool runtime)
+{
+	const struct edid *edid;
+	bool audio_before, audio_after;
+	unsigned int rates_before, rates_after;
+	char before_str[128], after_str[128];
+	int ret;
+
+	edid = build_edid(12, 2);
+	force_edid_and_connector(data, edid);
+
+	igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 12);
+
+	ret = try_modeset(data, &mode_1080p_hblank80);
+	igt_require(ret == 0);
+
+	wait_for_eld();
+
+	audio_before = audio_is_active();
+	rates_before = audio_before ? get_eld_rates() : 0;
+	rates_to_str(rates_before, before_str, sizeof(before_str));
+	igt_info("Before %s: audio=%d rates=%s\n",
+				 runtime ? "DPMS cycle" : "suspend",
+		 audio_before, before_str);
+
+	if (runtime) {
+		kmstest_set_connector_dpms(data->drm_fd,
+					   data->output->config.connector,
+					   DRM_MODE_DPMS_OFF);
+		kmstest_set_connector_dpms(data->drm_fd,
+					   data->output->config.connector,
+					   DRM_MODE_DPMS_ON);
+	} else {
+		igt_system_suspend_autoresume(state, SUSPEND_TEST_NONE);
+	}
+
+	wait_for_eld();
+
+	audio_after = audio_is_active();
+	rates_after = audio_after ? get_eld_rates() : 0;
+	rates_to_str(rates_after, after_str, sizeof(after_str));
+	igt_info("After %s:  audio=%d rates=%s\n",
+				 runtime ? "DPMS cycle" : "suspend",
+		 audio_after, after_str);
+
+	igt_assert_eq(audio_before, audio_after);
+	if (audio_before)
+		igt_assert_eq(rates_before, rates_after);
+
+	cleanup_connector(data);
+}
+
+int igt_main()
+{
+	data_t data = {};
+
+	igt_fixture() {
+		data.drm_fd = drm_open_driver_master(DRIVER_INTEL | DRIVER_XE);
+		igt_require(is_intel_device(data.drm_fd));
+		kmstest_set_vt_graphics_mode();
+		igt_display_require(&data.display, data.drm_fd);
+
+		data.output = find_hdmi_output(&data.display);
+		igt_require_f(data.output, "No HDMI connector found\n");
+
+		data.crtc = igt_first_crtc(&data.display);
+		igt_require_f(data.crtc, "No usable CRTC found\n");
+	}
+
+	igt_describe("Validate HDMI audio bandwidth with 160-pixel horizontal "
+		     "blanking across BPC and channel combinations.");
+	igt_subtest("audio-bw-hblank160")
+		test_audio_bw_supported(&data);
+
+	igt_describe("Validate HDMI audio bandwidth with 80-pixel horizontal "
+		     "blanking across BPC and channel combinations.");
+	igt_subtest("audio-bw-hblank80")
+		test_audio_bw_pruned(&data);
+
+	igt_describe("Validate audio recovery after suspend to memory with "
+		     "constrained hblank.");
+	igt_subtest("suspend-mem-audio-recovery")
+		test_audio_recovery(&data, SUSPEND_STATE_MEM, false);
+
+	igt_describe("Validate audio recovery after suspend to disk "
+		     "(hibernate) with constrained hblank.");
+	igt_subtest("suspend-disk-audio-recovery")
+		test_audio_recovery(&data, SUSPEND_STATE_DISK, false);
+
+	igt_describe("Validate audio recovery after a DPMS off/on cycle "
+		     "with constrained hblank.");
+	igt_subtest("dpms-audio-recovery")
+		test_audio_recovery(&data, 0, true);
+
+	igt_fixture() {
+		igt_display_fini(&data.display);
+		drm_close_driver(data.drm_fd);
+	}
+}
diff --git a/tests/meson.build b/tests/meson.build
index 1ac89bab7..0f2d4c087 100644
--- a/tests/meson.build
+++ b/tests/meson.build
@@ -262,6 +262,7 @@ intel_kms_progs = [
 	'kms_flip_scaled_crc',
 	'kms_flip_tiling',
 	'kms_frontbuffer_tracking',
+	'kms_hdmi_audio_bw',
 	'kms_joiner',
 	'kms_legacy_colorkey',
 	'kms_mmap_write_crc',
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread
end of thread, other threads:[~2026-09-18 16:42 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-09-08  6:25 [PATCH i-g-t,v2 1/2] tests/intel: Add kms_hdmi_audio_bw test Swati Sharma
2026-09-08  6:25 ` [PATCH i-g-t, v2 2/2] tests/intel: Add mode-rejected-max-dotclock subtest to kms_cdclk Swati Sharma
2026-09-08 18:37 ` ✓ i915.CI.BAT: success for series starting with [i-g-t,v2,1/2] tests/intel: Add kms_hdmi_audio_bw test Patchwork
2026-09-08 18:55 ` ✓ Xe.CI.BAT: " Patchwork
2026-09-09  1:28 ` ✗ Xe.CI.FULL: failure " Patchwork
2026-09-09 11:20 ` ✗ i915.CI.Full: " Patchwork
2026-09-10  6:54 ` [PATCH i-g-t,v2 1/2] " Borah, Chaitanya Kumar
2026-09-18 16:41 ` ✗ Fi.CI.BAT: failure for series starting with [i-g-t,v2,1/2] tests/intel: Add kms_hdmi_audio_bw test (rev2) Patchwork

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox