From: Kamil Konieczny <kamil.konieczny@linux.intel.com>
To: igt-dev@lists.freedesktop.org
Cc: petri.latvala@intel.com, Emma Anholt <emma@anholt.net>
Subject: Re: [igt-dev] [PATCH i-g-t 5/6] tests/v3d_create_bo: Create test for V3D's Create BO IOCTL
Date: Thu, 10 Nov 2022 16:06:53 +0100 [thread overview]
Message-ID: <Y20TjezTLUm22XDM@kamilkon-desk1> (raw)
In-Reply-To: <20221108235724.126287-6-mcanal@igalia.com>
Hi Maíra,
few nits, see below.
On 2022-11-08 at 20:57:23 -0300, Maíra Canal wrote:
> Add three igt_subtests for the DRM_IOCTL_V3D_CREATE_BO, which tests the
> creation of a zeroed BO and a 4096 bytes BO, and tests if the BO is
> properly cleaned.
>
> Signed-off-by: Maíra Canal <mcanal@igalia.com>
> ---
> tests/meson.build | 1 +
> tests/v3d/v3d_create_bo.c | 79 +++++++++++++++++++++++++++++++++++++++
> tests/v3d_ci/v3d.testlist | 3 ++
> 3 files changed, 83 insertions(+)
> create mode 100644 tests/v3d/v3d_create_bo.c
>
> diff --git a/tests/meson.build b/tests/meson.build
> index 5c9b1829..f1a6a9dd 100644
> --- a/tests/meson.build
> +++ b/tests/meson.build
> @@ -256,6 +256,7 @@ msm_progs = [
> ]
>
> v3d_progs = [
> + 'v3d_create_bo',
> 'v3d_get_bo_offset',
> 'v3d_get_param',
> 'v3d_mmap',
> diff --git a/tests/v3d/v3d_create_bo.c b/tests/v3d/v3d_create_bo.c
> new file mode 100644
> index 00000000..9b13f603
> --- /dev/null
> +++ b/tests/v3d/v3d_create_bo.c
> @@ -0,0 +1,79 @@
> +/*
> + * Copyright © 2022 Igalia S.L.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
Please use SPDX licence instead.
> + *
> + * Authors:
> + * Maíra Canal <mcanal@igalia.com>
> + */
> +
> +#include "igt.h"
> +#include "igt_v3d.h"
> +
> +igt_main
> +{
> + int fd;
> +
> + igt_fixture {
> + fd = drm_open_driver(DRIVER_V3D);
> + }
> +
Please put description to each new added test with igt_describe,
here and below. Look at lib/igt_core.h for how to do it.
You can test it with --describe option.
Regards,
Kamil
> + igt_subtest("create-bo-0") {
> + struct drm_v3d_create_bo create = {
> + .size = 0,
> + };
> + do_ioctl_err(fd, DRM_IOCTL_V3D_CREATE_BO, &create, EINVAL);
> + }
> +
> + igt_subtest("create-bo-4096") {
> + struct v3d_bo *bo = igt_v3d_create_bo(fd, PAGE_SIZE);
> + igt_v3d_free_bo(fd, bo);
> + }
> +
> + igt_subtest("create-bo-zeroed") {
> + int fd2 = drm_open_driver(DRIVER_V3D);
> + struct v3d_bo *bo;
> + /* A size different from any used in our other tests, to try
> + * to convince it to land as the only one of its size in the
> + * kernel BO cache
> + */
> + size_t size = 3 * PAGE_SIZE, i;
> +
> + /* Make a BO and free it on our main fd. */
> + bo = igt_v3d_create_bo(fd, size);
> + bo->map = igt_v3d_mmap_bo(fd, bo->handle, size, PROT_READ | PROT_WRITE);
> + memset(bo->map, 0xd0, size);
> + igt_v3d_free_bo(fd, bo);
> +
> + /* Now, allocate a BO on the other fd and make sure it doesn't
> + * have the old contents.
> + */
> + bo = igt_v3d_create_bo(fd2, size);
> + bo->map = igt_v3d_mmap_bo(fd2, bo->handle, size, PROT_READ | PROT_WRITE);
> + for (i = 0; i < size / 4; i++)
> + igt_assert_eq_u32(((uint32_t *)bo->map)[i], 0x0);
> + igt_v3d_free_bo(fd2, bo);
> +
> + close(fd2);
> + }
> +
> + igt_fixture
> + close(fd);
> +}
> diff --git a/tests/v3d_ci/v3d.testlist b/tests/v3d_ci/v3d.testlist
> index b55e8e57..f4355285 100644
> --- a/tests/v3d_ci/v3d.testlist
> +++ b/tests/v3d_ci/v3d.testlist
> @@ -1,3 +1,6 @@
> +igt@v3d_create_bo@create-bo-0
> +igt@v3d_create_bo@create-bo-4096
> +igt@v3d_create_bo@create-bo-zeroed
> igt@v3d_get_bo_offset@create-get-offsets
> igt@v3d_get_bo_offset@get-bad-handle
> igt@v3d_get_param@base-params
> --
> 2.38.1
>
next prev parent reply other threads:[~2022-11-10 15:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-08 23:57 [igt-dev] [PATCH i-g-t 0/6] V3D IGT Tests Updates Maíra Canal
2022-11-08 23:57 ` [igt-dev] [PATCH i-g-t 1/6] include/drm-uapi: Update to the latest v3d_drm.h Maíra Canal
2022-11-08 23:57 ` [igt-dev] [PATCH i-g-t 2/6] tests/v3d: Move V3D tests to their own folder Maíra Canal
2022-11-08 23:57 ` [igt-dev] [PATCH i-g-t 3/6] tests/v3d: Remove unused or redundant includes Maíra Canal
2022-11-08 23:57 ` [igt-dev] [PATCH i-g-t 4/6] lib/igt_v3d: Add PAGE_SIZE macro to V3D Maíra Canal
2022-11-08 23:57 ` [igt-dev] [PATCH i-g-t 5/6] tests/v3d_create_bo: Create test for V3D's Create BO IOCTL Maíra Canal
2022-11-10 15:06 ` Kamil Konieczny [this message]
2022-11-08 23:57 ` [igt-dev] [PATCH i-g-t 6/6] tests/v3d_perfmon: Create test for V3D's Perfmon IOCTLs Maíra Canal
2022-11-09 1:00 ` [igt-dev] ✓ Fi.CI.BAT: success for V3D IGT Tests Updates Patchwork
2022-11-09 4:23 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y20TjezTLUm22XDM@kamilkon-desk1 \
--to=kamil.konieczny@linux.intel.com \
--cc=emma@anholt.net \
--cc=igt-dev@lists.freedesktop.org \
--cc=petri.latvala@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox