From: "Souza, Jose" <jose.souza@intel.com>
To: "igt-dev@lists.freedesktop.org" <igt-dev@lists.freedesktop.org>,
"Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com>
Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_fbcon_fbt: Do a full connector probe.
Date: Tue, 5 Feb 2019 18:45:00 +0000 [thread overview]
Message-ID: <bfdf6a356fc2f95bbb3fd3b4e9a39473afe898f1.camel@intel.com> (raw)
In-Reply-To: <20190204205556.32512-1-dhinakaran.pandiyan@intel.com>
[-- Attachment #1.1: Type: text/plain, Size: 1894 bytes --]
On Mon, 2019-02-04 at 12:55 -0800, Dhinakaran Pandiyan wrote:
> kms_fbtcon_fbt appears to fail when it is the first test that is
> executed
> after module load.
> 'Test requirement not met in function set_mode_for_one_screen, file
> ../tests/kms_fbcon_fbt.c:153:
> Test requirement: i < drm->res->count_connectors'
> The problem seems to be that the 1920x1080 bios fb is re-used and
> that
> prunes the 4k mode before test execution. Later, when the test does
> not
> do a full-probe, the eDP connector does not have any valid modes.
drmModeGetConnectorCurrent() will get only one mode, the active one.
>
> <7>[ 12.444411] [drm:drm_mode_debug_printmodeline] Modeline
> 191:"3840x2160" 60 533250 3840 3888 3920 4000 2160 2163 2168 2222
> 0x48
> 0xa
> <7>[ 12.444418] [drm:drm_mode_prune_invalid] Not using 3840x2160
> mode:
> VIRTUAL_X
>
> Fix this by calling drmModeGetConnector() instead
> drmModeGetConnectorCurrent()
>
> Note that that test is still expected to fail as PSR status checks
> are
> broken.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109518
> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
> ---
> tests/kms_fbcon_fbt.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/tests/kms_fbcon_fbt.c b/tests/kms_fbcon_fbt.c
> index 9d0d5a36..40465a1c 100644
> --- a/tests/kms_fbcon_fbt.c
> +++ b/tests/kms_fbcon_fbt.c
> @@ -67,7 +67,7 @@ static void setup_drm(struct drm_info *drm)
> igt_assert(drm->res->count_connectors <= MAX_CONNECTORS);
>
> for (i = 0; i < drm->res->count_connectors; i++)
> - drm->connectors[i] = drmModeGetConnectorCurrent(drm-
> >fd,
> + drm->connectors[i] = drmModeGetConnector(drm->fd,
> drm->res-
> >connectors[i]);
>
> kmstest_set_vt_graphics_mode();
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2019-02-05 18:45 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-04 20:55 [igt-dev] [PATCH i-g-t] tests/kms_fbcon_fbt: Do a full connector probe Dhinakaran Pandiyan
2019-02-05 4:22 ` [igt-dev] ✓ Fi.CI.BAT: success for " Patchwork
2019-02-05 5:14 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2019-02-05 18:45 ` Souza, Jose [this message]
2019-02-06 3:29 ` [igt-dev] [PATCH i-g-t] " Dhinakaran Pandiyan
2019-04-26 6:53 ` Daniel Vetter
2019-02-28 18:38 ` [igt-dev] ✓ Fi.CI.BAT: success for tests/kms_fbcon_fbt: Do a full connector probe. (rev2) Patchwork
2019-02-28 22:10 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2019-04-06 0:20 ` [igt-dev] ✓ Fi.CI.BAT: success for tests/kms_fbcon_fbt: Do a full connector probe. (rev3) Patchwork
2019-04-07 0:29 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bfdf6a356fc2f95bbb3fd3b4e9a39473afe898f1.camel@intel.com \
--to=jose.souza@intel.com \
--cc=dhinakaran.pandiyan@intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox