From: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
To: Chester Lin <chester62515@gmail.com>,
Matthias Brugger <mbrugger@suse.com>,
Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
NXP S32 Linux Team <s32@nxp.com>,
Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>,
Radu Pirea <radu-nicolae.pirea@nxp.com>
Subject: [PATCH v2 1/2] arm64: dts: s32g: Add S32G2/S32G3 uSDHC pinmux
Date: Fri, 30 Aug 2024 14:33:46 +0300 [thread overview]
Message-ID: <20240830113347.4048370-2-ciprianmarian.costea@oss.nxp.com> (raw)
In-Reply-To: <20240830113347.4048370-1-ciprianmarian.costea@oss.nxp.com>
From: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Adding 100mhz & 200mhz pinmux support for uSDHC helps to enable
higher speed modes for SD (SDR50, DDR50, SDR104) and
eMMC (such as HS200, HS400/HS400ES).
Signed-off-by: Radu Pirea <radu-nicolae.pirea@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
---
arch/arm64/boot/dts/freescale/s32g2.dtsi | 153 ++++++++++++++++++
.../arm64/boot/dts/freescale/s32g274a-evb.dts | 4 +
.../boot/dts/freescale/s32g274a-rdb2.dts | 4 +
arch/arm64/boot/dts/freescale/s32g3.dtsi | 153 ++++++++++++++++++
.../boot/dts/freescale/s32g399a-rdb3.dts | 4 +
5 files changed, 318 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index fa054bfe7d5c..7be430b78c83 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -162,6 +162,159 @@ jtag-grp4 {
slew-rate = <166>;
};
};
+
+ pinctrl_usdhc0: usdhc0grp-pins {
+ usdhc0-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
+
+ pinctrl_usdhc0_100mhz: usdhc0-100mhzgrp-pins {
+ usdhc0-100mhz-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
+
+ pinctrl_usdhc0_200mhz: usdhc0-200mhzgrp-pins {
+ usdhc0-200mhz-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
};
uart0: serial@401c8000 {
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
index dbe498798bd9..7ab917f547ef 100644
--- a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
+++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
@@ -34,6 +34,10 @@ &uart0 {
};
&usdhc0 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc0>;
+ pinctrl-1 = <&pinctrl_usdhc0_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc0_200mhz>;
disable-wp;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
index ab1e5caaeae7..8739f63771bc 100644
--- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
+++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
@@ -40,6 +40,10 @@ &uart1 {
};
&usdhc0 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc0>;
+ pinctrl-1 = <&pinctrl_usdhc0_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc0_200mhz>;
disable-wp;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
index b4226a9143c8..6c572ffe37ca 100644
--- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
@@ -219,6 +219,159 @@ jtag-grp4 {
slew-rate = <166>;
};
};
+
+ pinctrl_usdhc0: usdhc0grp-pins {
+ usdhc0-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
+
+ pinctrl_usdhc0_100mhz: usdhc0-100mhzgrp-pins {
+ usdhc0-100mhz-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <150>;
+ };
+
+ usdhc0-100mhz-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
+
+ pinctrl_usdhc0_200mhz: usdhc0-200mhzgrp-pins {
+ usdhc0-200mhz-grp0 {
+ pinmux = <0x2e1>,
+ <0x381>;
+ output-enable;
+ bias-pull-down;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp1 {
+ pinmux = <0x2f1>,
+ <0x301>,
+ <0x311>,
+ <0x321>,
+ <0x331>,
+ <0x341>,
+ <0x351>,
+ <0x361>,
+ <0x371>;
+ output-enable;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp2 {
+ pinmux = <0x391>;
+ output-enable;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp3 {
+ pinmux = <0x3a0>;
+ input-enable;
+ slew-rate = <208>;
+ };
+
+ usdhc0-200mhz-grp4 {
+ pinmux = <0x2032>,
+ <0x2042>,
+ <0x2052>,
+ <0x2062>,
+ <0x2072>,
+ <0x2082>,
+ <0x2092>,
+ <0x20a2>,
+ <0x20b2>,
+ <0x20c2>;
+ };
+ };
};
uart0: serial@401c8000 {
diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
index 176e5af191c8..828e353455b5 100644
--- a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
+++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
@@ -40,6 +40,10 @@ &uart1 {
};
&usdhc0 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc0>;
+ pinctrl-1 = <&pinctrl_usdhc0_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc0_200mhz>;
bus-width = <8>;
disable-wp;
status = "okay";
--
2.45.2
next prev parent reply other threads:[~2024-08-30 11:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-30 11:33 [PATCH v2 0/2] add S32G2/S32G3 uSDHC pinmux Ciprian Costea
2024-08-30 11:33 ` Ciprian Costea [this message]
2024-09-06 15:53 ` [PATCH v2 1/2] arm64: dts: s32g: Add " Matthias Brugger
2024-09-17 17:44 ` Krzysztof Kozlowski
2024-09-18 9:58 ` Ciprian Marian Costea
2024-08-30 11:33 ` [PATCH v2 2/2] arm64: dts: s32g2: Disable support for SD/eMMC UHS mode Ciprian Costea
2024-09-06 15:53 ` Matthias Brugger
2024-10-08 9:25 ` [PATCH v2 0/2] add S32G2/S32G3 uSDHC pinmux Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240830113347.4048370-2-ciprianmarian.costea@oss.nxp.com \
--to=ciprianmarian.costea@oss.nxp.com \
--cc=chester62515@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=ghennadi.procopciuc@oss.nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mbrugger@suse.com \
--cc=radu-nicolae.pirea@nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=s32@nxp.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox