* [PATCH 1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS
@ 2024-10-01 16:31 Han Xu
2024-10-01 16:31 ` [PATCH 2/2] mtd: nand: raw: gpmi: improve power management handling Han Xu
2024-10-01 16:42 ` [PATCH 1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS Fabio Estevam
0 siblings, 2 replies; 3+ messages in thread
From: Han Xu @ 2024-10-01 16:31 UTC (permalink / raw)
To: Han Xu, Miquel Raynal, Richard Weinberger, Vignesh Raghavendra
Cc: imx, linux-mtd, linux-kernel
Replace the SET_SYSTEM_SLEEP_PM_OPS with modern SYSTEM_SLEEP_PM_OPS
alternatives.
Signed-off-by: Han Xu <han.xu@nxp.com>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index e1b515304e3c..b7a05ca4409c 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -2811,7 +2811,6 @@ static void gpmi_nand_remove(struct platform_device *pdev)
release_resources(this);
}
-#ifdef CONFIG_PM_SLEEP
static int gpmi_pm_suspend(struct device *dev)
{
struct gpmi_nand_data *this = dev_get_drvdata(dev);
@@ -2849,7 +2848,6 @@ static int gpmi_pm_resume(struct device *dev)
return 0;
}
-#endif /* CONFIG_PM_SLEEP */
static int __maybe_unused gpmi_runtime_suspend(struct device *dev)
{
@@ -2866,8 +2864,8 @@ static int __maybe_unused gpmi_runtime_resume(struct device *dev)
}
static const struct dev_pm_ops gpmi_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(gpmi_pm_suspend, gpmi_pm_resume)
- SET_RUNTIME_PM_OPS(gpmi_runtime_suspend, gpmi_runtime_resume, NULL)
+ SYSTEM_SLEEP_PM_OPS(gpmi_pm_suspend, gpmi_pm_resume)
+ RUNTIME_PM_OPS(gpmi_runtime_suspend, gpmi_runtime_resume, NULL)
};
static struct platform_driver gpmi_nand_driver = {
--
2.34.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] mtd: nand: raw: gpmi: improve power management handling
2024-10-01 16:31 [PATCH 1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS Han Xu
@ 2024-10-01 16:31 ` Han Xu
2024-10-01 16:42 ` [PATCH 1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS Fabio Estevam
1 sibling, 0 replies; 3+ messages in thread
From: Han Xu @ 2024-10-01 16:31 UTC (permalink / raw)
To: Han Xu, Miquel Raynal, Richard Weinberger, Vignesh Raghavendra
Cc: imx, linux-mtd, linux-kernel
The commit refactors the power management handling in the gpmi nand
driver. It removes redundant pm_runtime calls in the probe function,
handles the pad control in suspend and resume, and moves the calls to
acquire and release DMA channels to the runtime suspend and resume
functions.
Signed-off-by: Han Xu <han.xu@nxp.com>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 66 ++++++++++++----------
1 file changed, 37 insertions(+), 29 deletions(-)
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index b7a05ca4409c..c273c08c756b 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -15,6 +15,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/dma/mxs-dma.h>
#include "gpmi-nand.h"
#include "gpmi-regs.h"
@@ -737,9 +738,8 @@ static int bch_set_geometry(struct gpmi_nand_data *this)
if (ret)
return ret;
- ret = pm_runtime_get_sync(this->dev);
+ ret = pm_runtime_resume_and_get(this->dev);
if (ret < 0) {
- pm_runtime_put_autosuspend(this->dev);
return ret;
}
@@ -1301,10 +1301,6 @@ static int acquire_resources(struct gpmi_nand_data *this)
if (ret)
goto exit_regs;
- ret = acquire_dma_channels(this);
- if (ret)
- goto exit_regs;
-
ret = gpmi_get_clks(this);
if (ret)
goto exit_clock;
@@ -2761,15 +2757,9 @@ static int gpmi_nand_probe(struct platform_device *pdev)
if (ret)
goto exit_acquire_resources;
- ret = __gpmi_enable_clk(this, true);
- if (ret)
- goto exit_acquire_resources;
-
+ pm_runtime_enable(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, 500);
pm_runtime_use_autosuspend(&pdev->dev);
- pm_runtime_set_active(&pdev->dev);
- pm_runtime_enable(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);
ret = gpmi_init(this);
if (ret)
@@ -2779,15 +2769,12 @@ static int gpmi_nand_probe(struct platform_device *pdev)
if (ret)
goto exit_nfc_init;
- pm_runtime_mark_last_busy(&pdev->dev);
- pm_runtime_put_autosuspend(&pdev->dev);
-
dev_info(this->dev, "driver registered.\n");
return 0;
exit_nfc_init:
- pm_runtime_put(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
release_resources(this);
exit_acquire_resources:
@@ -2801,22 +2788,23 @@ static void gpmi_nand_remove(struct platform_device *pdev)
struct nand_chip *chip = &this->nand;
int ret;
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-
ret = mtd_device_unregister(nand_to_mtd(chip));
WARN_ON(ret);
nand_cleanup(chip);
gpmi_free_dma_buffer(this);
release_resources(this);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
}
static int gpmi_pm_suspend(struct device *dev)
{
- struct gpmi_nand_data *this = dev_get_drvdata(dev);
+ int ret;
- release_dma_channels(this);
- return 0;
+ pinctrl_pm_select_sleep_state(dev);
+ ret = pm_runtime_force_suspend(dev);
+
+ return ret;
}
static int gpmi_pm_resume(struct device *dev)
@@ -2824,9 +2812,13 @@ static int gpmi_pm_resume(struct device *dev)
struct gpmi_nand_data *this = dev_get_drvdata(dev);
int ret;
- ret = acquire_dma_channels(this);
- if (ret < 0)
+ ret = pm_runtime_force_resume(dev);
+ if (ret) {
+ dev_err(this->dev, "Error in resume %d\n", ret);
return ret;
+ }
+
+ pinctrl_pm_select_default_state(dev);
/* re-init the GPMI registers */
ret = gpmi_init(this);
@@ -2849,18 +2841,34 @@ static int gpmi_pm_resume(struct device *dev)
return 0;
}
-static int __maybe_unused gpmi_runtime_suspend(struct device *dev)
+#define gpmi_enable_clk(x) __gpmi_enable_clk(x, true)
+#define gpmi_disable_clk(x) __gpmi_enable_clk(x, false)
+
+static int gpmi_runtime_suspend(struct device *dev)
{
struct gpmi_nand_data *this = dev_get_drvdata(dev);
- return __gpmi_enable_clk(this, false);
+ gpmi_disable_clk(this);
+ release_dma_channels(this);
+
+ return 0;
}
-static int __maybe_unused gpmi_runtime_resume(struct device *dev)
+static int gpmi_runtime_resume(struct device *dev)
{
struct gpmi_nand_data *this = dev_get_drvdata(dev);
+ int ret;
+
+ ret = gpmi_enable_clk(this);
+ if (ret)
+ return ret;
+
+ ret = acquire_dma_channels(this);
+ if (ret < 0)
+ return ret;
+
+ return 0;
- return __gpmi_enable_clk(this, true);
}
static const struct dev_pm_ops gpmi_pm_ops = {
--
2.34.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS
2024-10-01 16:31 [PATCH 1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS Han Xu
2024-10-01 16:31 ` [PATCH 2/2] mtd: nand: raw: gpmi: improve power management handling Han Xu
@ 2024-10-01 16:42 ` Fabio Estevam
1 sibling, 0 replies; 3+ messages in thread
From: Fabio Estevam @ 2024-10-01 16:42 UTC (permalink / raw)
To: Han Xu
Cc: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, imx,
linux-mtd, linux-kernel
On Tue, Oct 1, 2024 at 1:32 PM Han Xu <han.xu@nxp.com> wrote:
> static const struct dev_pm_ops gpmi_pm_ops = {
> - SET_SYSTEM_SLEEP_PM_OPS(gpmi_pm_suspend, gpmi_pm_resume)
> - SET_RUNTIME_PM_OPS(gpmi_runtime_suspend, gpmi_runtime_resume, NULL)
> + SYSTEM_SLEEP_PM_OPS(gpmi_pm_suspend, gpmi_pm_resume)
> + RUNTIME_PM_OPS(gpmi_runtime_suspend, gpmi_runtime_resume, NULL)
> };
You missed to change .pm = &gpmi_pm_ops, to .pm = pm_ptr(&gpmi_pm_ops),
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-10-01 16:42 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-10-01 16:31 [PATCH 1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS Han Xu
2024-10-01 16:31 ` [PATCH 2/2] mtd: nand: raw: gpmi: improve power management handling Han Xu
2024-10-01 16:42 ` [PATCH 1/2] mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS Fabio Estevam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox