[PATCH net-next 5/5] net: enetc: add UDP segmentation offload support

[Wei Fang <wei.fang@nxp.com>]

For LS1028A, the enetc driver implements TCP segmentation via the tso
interfaces provided by the kernel, but since the commit 3d5b459ba0e3
("net: tso: add UDP segmentation support"), the LS1028A enetc driver
also supports UDP segmentation.
For i.MX95, the enetc driver implements TCP segmentation via the LSO
feature, and LSO also supports UDP segmentation.
Therefore, setting the NETIF_F_GSO_UDP_L4 bit in the enetc net_device
indicates that enetc supports UDP segmentation offload.

Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
 drivers/net/ethernet/freescale/enetc/enetc_pf_common.c | 6 ++++--
 drivers/net/ethernet/freescale/enetc/enetc_vf.c        | 6 ++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
index 82a67356abe4..76fc3c6fdec1 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
@@ -110,11 +110,13 @@ void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
 	ndev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM |
 			    NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
 			    NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_LOOPBACK |
-			    NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6;
+			    NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6 |
+			    NETIF_F_GSO_UDP_L4;
 	ndev->features = NETIF_F_HIGHDMA | NETIF_F_SG | NETIF_F_RXCSUM |
 			 NETIF_F_HW_VLAN_CTAG_TX |
 			 NETIF_F_HW_VLAN_CTAG_RX |
-			 NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6;
+			 NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6 |
+			 NETIF_F_GSO_UDP_L4;
 	ndev->vlan_features = NETIF_F_SG | NETIF_F_HW_CSUM |
 			      NETIF_F_TSO | NETIF_F_TSO6;
 
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_vf.c b/drivers/net/ethernet/freescale/enetc/enetc_vf.c
index 052833acd220..ba71c04994c4 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_vf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_vf.c
@@ -138,11 +138,13 @@ static void enetc_vf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
 	ndev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM |
 			    NETIF_F_HW_VLAN_CTAG_TX |
 			    NETIF_F_HW_VLAN_CTAG_RX |
-			    NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6;
+			    NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6 |
+			    NETIF_F_GSO_UDP_L4;
 	ndev->features = NETIF_F_HIGHDMA | NETIF_F_SG | NETIF_F_RXCSUM |
 			 NETIF_F_HW_VLAN_CTAG_TX |
 			 NETIF_F_HW_VLAN_CTAG_RX |
-			 NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6;
+			 NETIF_F_HW_CSUM | NETIF_F_TSO | NETIF_F_TSO6 |
+			 NETIF_F_GSO_UDP_L4;
 	ndev->vlan_features = NETIF_F_SG | NETIF_F_HW_CSUM |
 			      NETIF_F_TSO | NETIF_F_TSO6;
 
-- 
2.34.1