[PATCH AUTOSEL 6.11 02/20] spi: spi-fsl-lpspi: Adjust type of scldiv

[PATCH AUTOSEL 6.11 02/20] spi: spi-fsl-lpspi: Adjust type of scldiv

[Sasha Levin]

From: Stefan Wahren <wahrenst@gmx.net>

[ Upstream commit fa8ecda9876ac1e7b29257aa82af1fd0695496e2 ]

The target value of scldiv is just a byte, but its calculation in
fsl_lpspi_set_bitrate could be negative. So use an adequate type to store
the result and avoid overflows. After that this needs range check
adjustments, but this should make the code less opaque.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240930093056.93418-2-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-fsl-lpspi.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 977e8b55c82b7..196cc68f2057b 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -315,9 +315,10 @@ static void fsl_lpspi_set_watermark(struct fsl_lpspi_data *fsl_lpspi)
 static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi)
 {
 	struct lpspi_config config = fsl_lpspi->config;
-	unsigned int perclk_rate, scldiv, div;
+	unsigned int perclk_rate, div;
 	u8 prescale_max;
 	u8 prescale;
+	int scldiv;
 
 	perclk_rate = clk_get_rate(fsl_lpspi->clk_per);
 	prescale_max = fsl_lpspi->devtype_data->prescale_max;
@@ -338,13 +339,13 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi)
 
 	for (prescale = 0; prescale <= prescale_max; prescale++) {
 		scldiv = div / (1 << prescale) - 2;
-		if (scldiv < 256) {
+		if (scldiv >= 0 && scldiv < 256) {
 			fsl_lpspi->config.prescale = prescale;
 			break;
 		}
 	}
 
-	if (scldiv >= 256)
+	if (scldiv < 0 || scldiv >= 256)
 		return -EINVAL;
 
 	writel(scldiv | (scldiv << 8) | ((scldiv >> 1) << 16),
-- 
2.43.0

[PATCH AUTOSEL 6.11 13/20] mmc: sdhci-esdhc-imx: enable quirks SDHCI_QUIRK_NO_LED

[Sasha Levin]

From: Peng Fan <peng.fan@nxp.com>

[ Upstream commit 4dede2b76f4a760e948e1a49b1520881cb459bd3 ]

Enable SDHCI_QUIRK_NO_LED for i.MX7ULP, i.MX8MM, i.MX8QXP and
i.MXRT1050. Even there is LCTL register bit, there is no IOMUX PAD
for it. So there is no sense to enable LED for SDHCI for these SoCs.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240923062016.1165868-1-peng.fan@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 8f0bc6dca2b04..ef3a44f2dff16 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -238,6 +238,7 @@ struct esdhc_platform_data {
 
 struct esdhc_soc_data {
 	u32 flags;
+	u32 quirks;
 };
 
 static const struct esdhc_soc_data esdhc_imx25_data = {
@@ -309,10 +310,12 @@ static struct esdhc_soc_data usdhc_imx7ulp_data = {
 			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
 			| ESDHC_FLAG_PMQOS | ESDHC_FLAG_HS400
 			| ESDHC_FLAG_STATE_LOST_IN_LPMODE,
+	.quirks = SDHCI_QUIRK_NO_LED,
 };
 static struct esdhc_soc_data usdhc_imxrt1050_data = {
 	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
 			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200,
+	.quirks = SDHCI_QUIRK_NO_LED,
 };
 
 static struct esdhc_soc_data usdhc_imx8qxp_data = {
@@ -321,6 +324,7 @@ static struct esdhc_soc_data usdhc_imx8qxp_data = {
 			| ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
 			| ESDHC_FLAG_STATE_LOST_IN_LPMODE
 			| ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME,
+	.quirks = SDHCI_QUIRK_NO_LED,
 };
 
 static struct esdhc_soc_data usdhc_imx8mm_data = {
@@ -328,6 +332,7 @@ static struct esdhc_soc_data usdhc_imx8mm_data = {
 			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
 			| ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
 			| ESDHC_FLAG_STATE_LOST_IN_LPMODE,
+	.quirks = SDHCI_QUIRK_NO_LED,
 };
 
 struct pltfm_imx_data {
@@ -1687,6 +1692,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 
 	imx_data->socdata = device_get_match_data(&pdev->dev);
 
+	host->quirks |= imx_data->socdata->quirks;
 	if (imx_data->socdata->flags & ESDHC_FLAG_PMQOS)
 		cpu_latency_qos_add_request(&imx_data->pm_qos_req, 0);
 
-- 
2.43.0

[PATCH AUTOSEL 6.11 15/20] soc: imx8m: Probe the SoC driver as platform driver

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 9cc832d37799dbea950c4c8a34721b02b8b5a8ff ]

With driver_async_probe=* on kernel command line, the following trace is
produced because on i.MX8M Plus hardware because the soc-imx8m.c driver
calls of_clk_get_by_name() which returns -EPROBE_DEFER because the clock
driver is not yet probed. This was not detected during regular testing
without driver_async_probe.

Convert the SoC code to platform driver and instantiate a platform device
in its current device_initcall() to probe the platform driver. Rework
.soc_revision callback to always return valid error code and return SoC
revision via parameter. This way, if anything in the .soc_revision callback
return -EPROBE_DEFER, it gets propagated to .probe and the .probe will get
retried later.

"
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1 at drivers/soc/imx/soc-imx8m.c:115 imx8mm_soc_revision+0xdc/0x180
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-next-20240924-00002-g2062bb554dea #603
Hardware name: DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3) (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : imx8mm_soc_revision+0xdc/0x180
lr : imx8mm_soc_revision+0xd0/0x180
sp : ffff8000821fbcc0
x29: ffff8000821fbce0 x28: 0000000000000000 x27: ffff800081810120
x26: ffff8000818a9970 x25: 0000000000000006 x24: 0000000000824311
x23: ffff8000817f42c8 x22: ffff0000df8be210 x21: fffffffffffffdfb
x20: ffff800082780000 x19: 0000000000000001 x18: ffffffffffffffff
x17: ffff800081fff418 x16: ffff8000823e1000 x15: ffff0000c03b65e8
x14: ffff0000c00051b0 x13: ffff800082790000 x12: 0000000000000801
x11: ffff80008278ffff x10: ffff80008209d3a6 x9 : ffff80008062e95c
x8 : ffff8000821fb9a0 x7 : 0000000000000000 x6 : 00000000000080e3
x5 : ffff0000df8c03d8 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : fffffffffffffdfb x0 : fffffffffffffdfb
Call trace:
 imx8mm_soc_revision+0xdc/0x180
 imx8_soc_init+0xb0/0x1e0
 do_one_initcall+0x94/0x1a8
 kernel_init_freeable+0x240/0x2a8
 kernel_init+0x28/0x140
 ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
SoC: i.MX8MP revision 1.1
"

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/imx/soc-imx8m.c | 107 ++++++++++++++++++++++++++++--------
 1 file changed, 85 insertions(+), 22 deletions(-)

diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c
index fe111bae38c8e..5ea8887828c06 100644
--- a/drivers/soc/imx/soc-imx8m.c
+++ b/drivers/soc/imx/soc-imx8m.c
@@ -30,7 +30,7 @@
 
 struct imx8_soc_data {
 	char *name;
-	u32 (*soc_revision)(void);
+	int (*soc_revision)(u32 *socrev);
 };
 
 static u64 soc_uid;
@@ -51,24 +51,29 @@ static u32 imx8mq_soc_revision_from_atf(void)
 static inline u32 imx8mq_soc_revision_from_atf(void) { return 0; };
 #endif
 
-static u32 __init imx8mq_soc_revision(void)
+static int imx8mq_soc_revision(u32 *socrev)
 {
 	struct device_node *np;
 	void __iomem *ocotp_base;
 	u32 magic;
 	u32 rev;
 	struct clk *clk;
+	int ret;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-ocotp");
 	if (!np)
-		return 0;
+		return -EINVAL;
 
 	ocotp_base = of_iomap(np, 0);
-	WARN_ON(!ocotp_base);
+	if (!ocotp_base) {
+		ret = -EINVAL;
+		goto err_iomap;
+	}
+
 	clk = of_clk_get_by_name(np, NULL);
 	if (IS_ERR(clk)) {
-		WARN_ON(IS_ERR(clk));
-		return 0;
+		ret = PTR_ERR(clk);
+		goto err_clk;
 	}
 
 	clk_prepare_enable(clk);
@@ -88,32 +93,45 @@ static u32 __init imx8mq_soc_revision(void)
 	soc_uid <<= 32;
 	soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
 
+	*socrev = rev;
+
 	clk_disable_unprepare(clk);
 	clk_put(clk);
 	iounmap(ocotp_base);
 	of_node_put(np);
 
-	return rev;
+	return 0;
+
+err_clk:
+	iounmap(ocotp_base);
+err_iomap:
+	of_node_put(np);
+	return ret;
 }
 
-static void __init imx8mm_soc_uid(void)
+static int imx8mm_soc_uid(void)
 {
 	void __iomem *ocotp_base;
 	struct device_node *np;
 	struct clk *clk;
+	int ret = 0;
 	u32 offset = of_machine_is_compatible("fsl,imx8mp") ?
 		     IMX8MP_OCOTP_UID_OFFSET : 0;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-ocotp");
 	if (!np)
-		return;
+		return -EINVAL;
 
 	ocotp_base = of_iomap(np, 0);
-	WARN_ON(!ocotp_base);
+	if (!ocotp_base) {
+		ret = -EINVAL;
+		goto err_iomap;
+	}
+
 	clk = of_clk_get_by_name(np, NULL);
 	if (IS_ERR(clk)) {
-		WARN_ON(IS_ERR(clk));
-		return;
+		ret = PTR_ERR(clk);
+		goto err_clk;
 	}
 
 	clk_prepare_enable(clk);
@@ -124,31 +142,41 @@ static void __init imx8mm_soc_uid(void)
 
 	clk_disable_unprepare(clk);
 	clk_put(clk);
+
+err_clk:
 	iounmap(ocotp_base);
+err_iomap:
 	of_node_put(np);
+
+	return ret;
 }
 
-static u32 __init imx8mm_soc_revision(void)
+static int imx8mm_soc_revision(u32 *socrev)
 {
 	struct device_node *np;
 	void __iomem *anatop_base;
-	u32 rev;
+	int ret;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-anatop");
 	if (!np)
-		return 0;
+		return -EINVAL;
 
 	anatop_base = of_iomap(np, 0);
-	WARN_ON(!anatop_base);
+	if (!anatop_base) {
+		ret = -EINVAL;
+		goto err_iomap;
+	}
 
-	rev = readl_relaxed(anatop_base + ANADIG_DIGPROG_IMX8MM);
+	*socrev = readl_relaxed(anatop_base + ANADIG_DIGPROG_IMX8MM);
 
 	iounmap(anatop_base);
 	of_node_put(np);
 
-	imx8mm_soc_uid();
+	return imx8mm_soc_uid();
 
-	return rev;
+err_iomap:
+	of_node_put(np);
+	return ret;
 }
 
 static const struct imx8_soc_data imx8mq_soc_data = {
@@ -184,7 +212,7 @@ static __maybe_unused const struct of_device_id imx8_soc_match[] = {
 	kasprintf(GFP_KERNEL, "%d.%d", (soc_rev >> 4) & 0xf,  soc_rev & 0xf) : \
 	"unknown"
 
-static int __init imx8_soc_init(void)
+static int imx8m_soc_probe(struct platform_device *pdev)
 {
 	struct soc_device_attribute *soc_dev_attr;
 	struct soc_device *soc_dev;
@@ -212,8 +240,11 @@ static int __init imx8_soc_init(void)
 	data = id->data;
 	if (data) {
 		soc_dev_attr->soc_id = data->name;
-		if (data->soc_revision)
-			soc_rev = data->soc_revision();
+		if (data->soc_revision) {
+			ret = data->soc_revision(&soc_rev);
+			if (ret)
+				goto free_soc;
+		}
 	}
 
 	soc_dev_attr->revision = imx8_revision(soc_rev);
@@ -251,6 +282,38 @@ static int __init imx8_soc_init(void)
 	kfree(soc_dev_attr);
 	return ret;
 }
+
+static struct platform_driver imx8m_soc_driver = {
+	.probe = imx8m_soc_probe,
+	.driver = {
+		.name = "imx8m-soc",
+	},
+};
+
+static int __init imx8_soc_init(void)
+{
+	struct platform_device *pdev;
+	int ret;
+
+	/* No match means this is non-i.MX8M hardware, do nothing. */
+	if (!of_match_node(imx8_soc_match, of_root))
+		return 0;
+
+	ret = platform_driver_register(&imx8m_soc_driver);
+	if (ret) {
+		pr_err("Failed to register imx8m-soc platform driver: %d\n", ret);
+		return ret;
+	}
+
+	pdev = platform_device_register_simple("imx8m-soc", -1, NULL, 0);
+	if (IS_ERR(pdev)) {
+		pr_err("Failed to register imx8m-soc platform device: %ld\n", PTR_ERR(pdev));
+		platform_driver_unregister(&imx8m_soc_driver);
+		return PTR_ERR(pdev);
+	}
+
+	return 0;
+}
 device_initcall(imx8_soc_init);
 MODULE_DESCRIPTION("NXP i.MX8M SoC driver");
 MODULE_LICENSE("GPL");
-- 
2.43.0