Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Wei Fang <wei.fang@nxp.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
	shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com, frank.li@nxp.com
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] arm64: dts: imx95: add NETC related nodes
Date: Thu, 19 Dec 2024 14:13:39 +0800	[thread overview]
Message-ID: <20241219061340.1633173-2-wei.fang@nxp.com> (raw)
In-Reply-To: <20241219061340.1633173-1-wei.fang@nxp.com>

Add NETC related nodes for i.MX95.

Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx95.dtsi | 94 ++++++++++++++++++++++++
 1 file changed, 94 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index e9c7a8265d71..8b0eb1d835e8 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -1697,10 +1697,104 @@ sai2: sai@4c880000 {
 			status = "disabled";
 		};
 
+		netc_blk_ctrl: system-controller@4cde0000 {
+			compatible = "nxp,imx95-netc-blk-ctrl";
+			reg = <0x0 0x4cde0000 0x0 0x10000>,
+			      <0x0 0x4cdf0000 0x0 0x10000>,
+			      <0x0 0x4c81000c 0x0 0x18>;
+			reg-names = "ierb", "prb", "netcmix";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			power-domains = <&scmi_devpd IMX95_PD_NETC>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_ENET>,
+					  <&scmi_clk IMX95_CLK_ENETREF>;
+			assigned-clock-parents = <&scmi_clk IMX95_CLK_SYSPLL1_PFD2>,
+						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD0>;
+			assigned-clock-rates = <666666666>, <250000000>;
+			clocks = <&scmi_clk IMX95_CLK_ENET>;
+			clock-names = "ipg";
+			status = "disabled";
+
+			netc_bus0: pcie@4ca00000 {
+				compatible = "pci-host-ecam-generic";
+				reg = <0x0 0x4ca00000 0x0 0x100000>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				bus-range = <0x0 0x0>;
+				msi-map = <0x0 &its 0x60 0x1>,	//ENETC0 PF
+					  <0x10 &its 0x61 0x1>, //ENETC0 VF0
+					  <0x20 &its 0x62 0x1>, //ENETC0 VF1
+					  <0x40 &its 0x63 0x1>, //ENETC1 PF
+					  <0x80 &its 0x64 0x1>, //ENETC2 PF
+					  <0x90 &its 0x65 0x1>, //ENETC2 VF0
+					  <0xa0 &its 0x66 0x1>, //ENETC2 VF1
+					  <0xc0 &its 0x67 0x1>; //NETC Timer
+					 /* ENETC0~2 and Timer BAR0 - non-prefetchable memory */
+				ranges = <0x82000000 0x0 0x4cc00000  0x0 0x4cc00000  0x0 0xe0000
+					 /* Timer BAR2 - prefetchable memory */
+					 0xc2000000 0x0 0x4cd00000  0x0 0x4cd00000  0x0 0x10000
+					 /* ENETC0~2: VF0-1 BAR0 - non-prefetchable memory */
+					 0x82000000 0x0 0x4cd20000  0x0 0x4cd20000  0x0 0x60000
+					 /* ENETC0~2: VF0-1 BAR2 - prefetchable memory */
+					 0xc2000000 0x0 0x4cd80000  0x0 0x4cd80000  0x0 0x60000>;
+
+				enetc_port0: ethernet@0,0 {
+					compatible = "pci1131,e101";
+					reg = <0x000000 0 0 0 0>;
+					clocks = <&scmi_clk IMX95_CLK_ENETREF>;
+					clock-names = "ref";
+					status = "disabled";
+				};
+
+				enetc_port1: ethernet@8,0 {
+					compatible = "pci1131,e101";
+					reg = <0x004000 0 0 0 0>;
+					clocks = <&scmi_clk IMX95_CLK_ENETREF>;
+					clock-names = "ref";
+					status = "disabled";
+				};
+
+				enetc_port2: ethernet@10,0 {
+					compatible = "pci1131,e101";
+					reg = <0x008000 0 0 0 0>;
+					status = "disabled";
+				};
+
+				netc_timer: ethernet@18,0 {
+					reg = <0x00c000 0 0 0 0>;
+					status = "disabled";
+				};
+			};
+
+			netc_bus1: pcie@4cb00000 {
+				compatible = "pci-host-ecam-generic";
+				reg = <0x0 0x4cb00000 0x0 0x100000>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				bus-range = <0x1 0x1>;
+					 /* EMDIO BAR0 - non-prefetchable memory */
+				ranges = <0x82000000 0x0 0x4cce0000  0x0 0x4cce0000  0x0 0x20000
+					 /* EMDIO BAR2 - prefetchable memory */
+					 0xc2000000 0x0 0x4cd10000  0x0 0x4cd10000  0x0 0x10000>;
+
+				netc_emdio: mdio@0,0 {
+					compatible = "pci1131,ee00";
+					reg = <0x010000 0 0 0 0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+				};
+			};
+		};
+
 		ddr-pmu@4e090dc0 {
 			compatible = "fsl,imx95-ddr-pmu", "fsl,imx93-ddr-pmu";
 			reg = <0x0 0x4e090dc0 0x0 0x200>;
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
 	};
 };
-- 
2.34.1


  reply	other threads:[~2024-12-19  6:29 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-19  6:13 [PATCH v2 0/2] Add NETC support for i.MX95 Wei Fang
2024-12-19  6:13 ` Wei Fang [this message]
2024-12-19 17:50   ` [PATCH v2 1/2] arm64: dts: imx95: add NETC related nodes Frank Li
2024-12-30  8:15   ` Shawn Guo
2025-01-06  9:27   ` Alexander Stein
2024-12-19  6:13 ` [PATCH v2 2/2] arm64: dts: imx95-19x19-evk: add ENETC 0 support Wei Fang
2024-12-19 17:50   ` Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241219061340.1633173-2-wei.fang@nxp.com \
    --to=wei.fang@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=frank.li@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox