From: Wei Fang <wei.fang@nxp.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, frank.li@nxp.com
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/2] arm64: dts: imx95-19x19-evk: add ENETC 0 support
Date: Thu, 19 Dec 2024 14:13:40 +0800 [thread overview]
Message-ID: <20241219061340.1633173-3-wei.fang@nxp.com> (raw)
In-Reply-To: <20241219061340.1633173-1-wei.fang@nxp.com>
Add ENETC 0 (1G ethernet port) support for i.MX95-19x19-EVK board. In
addition, because all ENETC instances share MDIO bus, so enable EMDIO
at the same time.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
.../boot/dts/freescale/imx95-19x19-evk.dts | 52 +++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 6086cb7fa5a0..8bc066c3760c 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -22,6 +22,7 @@ / {
compatible = "fsl,imx95-19x19-evk", "fsl,imx95";
aliases {
+ ethernet0 = &enetc_port0;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
@@ -193,6 +194,14 @@ sound-wm8962 {
};
};
+&enetc_port0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enetc0>;
+ phy-handle = <ðphy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+};
+
&flexspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexspi1>;
@@ -338,6 +347,25 @@ &mu7 {
status = "okay";
};
+&netcmix_blk_ctrl {
+ status = "okay";
+};
+
+&netc_blk_ctrl {
+ status = "okay";
+};
+
+&netc_emdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emdio>;
+ status = "okay";
+
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ realtek,clkout-disable;
+ };
+};
+
&pcie0 {
pinctrl-0 = <&pinctrl_pcie0>;
pinctrl-names = "default";
@@ -429,6 +457,30 @@ &wdog3 {
};
&scmi_iomuxc {
+ pinctrl_emdio: emdiogrp{
+ fsl,pins = <
+ IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC 0x57e
+ IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO 0x97e
+ >;
+ };
+
+ pinctrl_enetc0: enetc0grp {
+ fsl,pins = <
+ IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x57e
+ IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x57e
+ IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x57e
+ IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x57e
+ IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e
+ IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e
+ IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e
+ IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e
+ IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e
+ IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e
+ IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e
+ IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e
+ >;
+ };
+
pinctrl_flexspi1: flexspi1grp {
fsl,pins = <
IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x3fe
--
2.34.1
next prev parent reply other threads:[~2024-12-19 6:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-19 6:13 [PATCH v2 0/2] Add NETC support for i.MX95 Wei Fang
2024-12-19 6:13 ` [PATCH v2 1/2] arm64: dts: imx95: add NETC related nodes Wei Fang
2024-12-19 17:50 ` Frank Li
2024-12-30 8:15 ` Shawn Guo
2025-01-06 9:27 ` Alexander Stein
2024-12-19 6:13 ` Wei Fang [this message]
2024-12-19 17:50 ` [PATCH v2 2/2] arm64: dts: imx95-19x19-evk: add ENETC 0 support Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241219061340.1633173-3-wei.fang@nxp.com \
--to=wei.fang@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=frank.li@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox