Re: [PATCH 1/3] dt-bindings: extcon: ptn5150: Allow "connector" node to present

[Xu Yang <xu.yang_2@nxp.com>]

On Wed, Apr 16, 2025 at 10:23:08AM -0400, Frank Li wrote:
> On Wed, Apr 16, 2025 at 06:59:38PM +0800, Xu Yang wrote:
> > PTN5150 Type-C chip normally binds to a Type-C connector, so allow
> > "connector" node to present under it.
> 
> Suggest commit message:
> 
> PTN5150 is usually used with a Type-C connector, so allow a "connector"
> node to be defined under it.

Okay. 

Thanks,
Xu Yang

> 
> Frank
> >
> > Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml | 3 +++
> >  1 file changed, 3 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
> > index 072b3c0c5fd0..79f88b5f4e5c 100644
> > --- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
> > +++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
> > @@ -42,6 +42,9 @@ properties:
> >      description:
> >        A port node to link the usb controller for the dual role switch.
> >
> > +  connector:
> > +    $ref: /schemas/connector/usb-connector.yaml#
> > +
> >  required:
> >    - compatible
> >    - interrupts
> > --
> > 2.34.1
> >