* [PATCH 1/2] input: fix typos in comments
[not found] <20260904111911.32224-1-hemanth.selam@gmail.com>
@ 2026-09-04 11:19 ` Hemanth Selam
0 siblings, 0 replies; only message in thread
From: Hemanth Selam @ 2026-09-04 11:19 UTC (permalink / raw)
To: Dmitry Torokhov, Frank Li, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam
Cc: linux-kernel, linux-input, imx, linux-arm-kernel
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
drivers/input/keyboard/imx_keypad.c | 2 +-
drivers/input/keyboard/pxa27x_keypad.c | 2 +-
drivers/input/mouse/elantech.h | 2 +-
drivers/input/rmi4/rmi_f54.c | 2 +-
drivers/input/touchscreen/exc3000.c | 2 +-
drivers/input/touchscreen/usbtouchscreen.c | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index ccde60cd6bb3..9e0898588e06 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -396,7 +396,7 @@ static int imx_keypad_open(struct input_dev *dev)
imx_keypad_config(keypad);
- /* Sanity control, not all the rows must be actived now. */
+ /* Sanity control, not all the rows must be activated now. */
if ((readw(keypad->mmio_base + KPDR) & keypad->rows_en_mask) == 0) {
dev_err(&dev->dev,
"too many keys pressed, control pins initialisation\n");
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 4519eecb317b..320021e9d81b 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -522,7 +522,7 @@ static void pxa27x_keypad_config(struct pxa27x_keypad *keypad)
direct_key_num = keypad->direct_key_num;
/*
- * Direct keys usage may not start from KP_DKIN0, check the platfrom
+ * Direct keys usage may not start from KP_DKIN0, check the platform
* mask data to config the specific.
*/
if (!keypad->direct_key_mask)
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index 571e6ca11d33..a2ab57a11b64 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -57,7 +57,7 @@
/*
* One hard to find application note states that X axis range is 0 to 576
- * and Y axis range is 0 to 384 for harware version 1.
+ * and Y axis range is 0 to 384 for hardware version 1.
* Edge fuzz might be necessary because of bezel around the touchpad
*/
#define ETP_EDGE_FUZZ_V1 32
diff --git a/drivers/input/rmi4/rmi_f54.c b/drivers/input/rmi4/rmi_f54.c
index 6c6cdec7da9e..43a4e262cd2b 100644
--- a/drivers/input/rmi4/rmi_f54.c
+++ b/drivers/input/rmi4/rmi_f54.c
@@ -193,7 +193,7 @@ static int rmi_f54_request_report(struct rmi_function *fn, u8 report_type)
/*
* Small delay after disabling interrupts to avoid race condition
- * in firmare. This value is a bit higher than absolutely necessary.
+ * in firmware. This value is a bit higher than absolutely necessary.
* Should be removed once issue is resolved in firmware.
*/
usleep_range(2000, 3000);
diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c
index 037bb35238a3..e18e74781c58 100644
--- a/drivers/input/touchscreen/exc3000.c
+++ b/drivers/input/touchscreen/exc3000.c
@@ -406,7 +406,7 @@ static int exc3000_probe(struct i2c_client *client)
* ensures, that the device probe will not fail for temporary issues
* on the bus. This is not needed for the sysfs calls (userspace
* will receive the error code and can start another query) and
- * cannot be done for touch events (but that only means loosing one
+ * cannot be done for touch events (but that only means losing one
* or two touch events anyways).
*/
for (retry = 0; retry < 3; retry++) {
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 0bbacb517c28..81d24f5fbcc4 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -51,7 +51,7 @@ static bool hwcalib_xy;
module_param(hwcalib_xy, bool, 0644);
MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available");
-/* device specifc data/functions */
+/* device specific data/functions */
struct usbtouch_usb;
struct usbtouch_device_info {
int min_xc, max_xc;
--
2.48.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2026-09-04 11:19 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20260904111911.32224-1-hemanth.selam@gmail.com>
2026-09-04 11:19 ` [PATCH 1/2] input: fix typos in comments Hemanth Selam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox