[PATCH v4 0/4] Add i.MX943 PCIe supports

[PATCH v4 0/4] Add i.MX943 PCIe supports

[Richard Zhu]

This patch-set adds i.MX943 PCIe supports on EVK board. Please pay
attention to that it relies on the patch-set[1], and the PCIe1 port on
the EVK board relies on the [2].

Both of them are included in the v7.0 kernel.
[1] https://lore.kernel.org/imx/176649331066.523506.9443864112044699350.b4-ty@kernel.org/
[2] https://lore.kernel.org/imx/inzg46tc2fwsajxq4vzdyuiq7krzy6xtcg2mjaieninz7zsmgm@mtdjr4tuegpq/

Changes in v4:
- Add missing space after comma or '='.
- Remove 'fsl,max-link-speed = <3>;' in dts, since it's not required anymore.

Changes in v3:
- Fix build warning in the dtbs_check.

Changes in v2:
- Refine the nodes sequence refer to Frank's comments.
- Rely on [3], and remove the duplacated codes mentioned by Sherry.
[3] https://patchwork.kernel.org/project/imx/patch/20260204022306.2372889-1-sherry.sun@nxp.com/

[PATCH v4 1/4] dt-bindings: PCI: pci-imx6: Change maxItems of clocks
[PATCH v4 2/4] arm64: dts: imx94: add pcie0 and pcie0-ep supports
[PATCH v4 3/4] arm64: dts: imx943: add pcie1 and pcie1-ep supports
[PATCH v4 4/4] arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1]

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml |  4 ++--
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml        |  3 ++-
arch/arm64/boot/dts/freescale/Makefile                           |  4 ++++
arch/arm64/boot/dts/freescale/imx94.dtsi                         | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx943-evk.dts                     | 82 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx943.dtsi                        | 73 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
6 files changed, 249 insertions(+), 3 deletions(-)

[PATCH v4 1/4] dt-bindings: PCI: pci-imx6: Change maxItems of clocks and clock-names to 6

[Richard Zhu]

Previous commit 1352f58d7c8d ("dt-bindings: PCI: pci-imx6: Add external reference clock input")
was incomplete.

The constraints for "clocks" and "clock-names" still enforce an incorrect
number of items. Update maxItems for both properties to 6 to match the
actual hardware configuration.

Fixes: 1352f58d7c8d ("dt-bindings: PCI: pci-imx6: Add external reference clock input")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
Sorry to miss testing when work 1352f58d7c8d.
---
 .../devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml        | 4 ++--
 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml     | 3 ++-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
index cddbe21f99f2..0488c942092d 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
@@ -17,11 +17,11 @@ description:
 properties:
   clocks:
     minItems: 3
-    maxItems: 5
+    maxItems: 6
 
   clock-names:
     minItems: 3
-    maxItems: 5
+    maxItems: 6
 
   num-lanes:
     const: 1
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 12a01f7a5744..7fe1e0e9b565 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -40,7 +40,8 @@ properties:
       - description: PCIe PHY clock.
       - description: Additional required clock entry for imx6sx-pcie,
            imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep.
-      - description: PCIe reference clock.
+      - description: PCIe internal reference clock.
+      - description: PCIe additional external reference clock
 
   clock-names:
     minItems: 3
-- 
2.37.1

Re: [PATCH v4 1/4] dt-bindings: PCI: pci-imx6: Change maxItems of clocks and clock-names to 6

[Krzysztof Kozlowski]

On Tue, Mar 10, 2026 at 03:54:56PM +0800, Richard Zhu wrote:
> Previous commit 1352f58d7c8d ("dt-bindings: PCI: pci-imx6: Add external reference clock input")

Please run scripts/checkpatch.pl on the patches and fix reported
warnings. After that, run also 'scripts/checkpatch.pl --strict' on the
patches and (probably) fix more warnings. Some warnings can be ignored,
especially from --strict run, but the code here looks like it needs a
fix. Feel free to get in touch if the warning is not clear.

<form letter>
This is a friendly reminder during the review process.

It looks like you received a tag and forgot to add it.

If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions of patchset, under or above your Signed-off-by tag, unless
patch changed significantly (e.g. new properties added to the DT
bindings). Tag is "received", when provided in a message replied to you
on the mailing list. Tools like b4 can help here. However, there's no
need to repost patches *only* to add the tags. The upstream maintainer
will do that for tags received on the version they apply.

Please read:
https://elixir.bootlin.com/linux/v6.12-rc3/source/Documentation/process/submitting-patches.rst#L577

If a tag was not added on purpose, please state why and what changed.
</form letter>

RE: [PATCH v4 1/4] dt-bindings: PCI: pci-imx6: Change maxItems of clocks and clock-names to 6

[Hongxing Zhu]

> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@kernel.org>
> Sent: 2026年3月11日 14:18
> To: Hongxing Zhu <hongxing.zhu@nxp.com>
> Cc: robh@kernel.org; krzk+dt@kernel.org; conor+dt@kernel.org;
> bhelgaas@google.com; Frank Li <frank.li@nxp.com>; l.stach@pengutronix.de;
> lpieralisi@kernel.org; kwilczynski@kernel.org; mani@kernel.org;
> s.hauer@pengutronix.de; kernel@pengutronix.de; festevam@gmail.com;
> linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> devicetree@vger.kernel.org; imx@lists.linux.dev; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v4 1/4] dt-bindings: PCI: pci-imx6: Change maxItems of
> clocks and clock-names to 6
>
> On Tue, Mar 10, 2026 at 03:54:56PM +0800, Richard Zhu wrote:
> > Previous commit 1352f58d7c8d ("dt-bindings: PCI: pci-imx6: Add
> > external reference clock input")
>
> Please run scripts/checkpatch.pl on the patches and fix reported warnings.
> After that, run also 'scripts/checkpatch.pl --strict' on the patches and (probably)
> fix more warnings. Some warnings can be ignored, especially from --strict run,
> but the code here looks like it needs a fix. Feel free to get in touch if the
> warning is not clear.
>
> <form letter>
> This is a friendly reminder during the review process.
>
> It looks like you received a tag and forgot to add it.
>
> If you do not know the process, here is a short explanation:
> Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions of
> patchset, under or above your Signed-off-by tag, unless patch changed
> significantly (e.g. new properties added to the DT bindings). Tag is "received",
> when provided in a message replied to you on the mailing list. Tools like b4 can
> help here. However, there's no need to repost patches *only* to add the tags.
> The upstream maintainer will do that for tags received on the version they
> apply.
>
> Please read:
> https://elixir.boo/
> tlin.com%2Flinux%2Fv6.12-rc3%2Fsource%2FDocumentation%2Fprocess%2Fsub
> mitting-patches.rst%23L577&data=05%7C02%7Chongxing.zhu%40nxp.com%7C
> 0ab010f0a2344157b9e208de7f35f689%7C686ea1d3bc2b4c6fa92cd99c5c3016
> 35%7C0%7C0%7C639088066900523007%7CUnknown%7CTWFpbGZsb3d8eyJFb
> XB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFp
> bCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=4dDw4GIiEVwRjnZhYgfL7sKm
> udjcs8ciDKi022n78zQ%3D&reserved=0
>
> If a tag was not added on purpose, please state why and what changed.
> </form letter>
Hi Krzysztof:
I just received your tag in [PATCH v3 1/4] at 4:00 PM after I sent out
 the v4 patch-set at 3:53 PM. That's why it's missed in [PATCH v4 1/4].
The tag would be added in next version.

Best Regards
Richard Zhu

Re: [PATCH v4 1/4] dt-bindings: PCI: pci-imx6: Change maxItems of clocks and clock-names to 6

[Krzysztof Kozlowski]

On 11/03/2026 07:31, Hongxing Zhu wrote:
> Hi Krzysztof:
> I just received your tag in [PATCH v3 1/4] at 4:00 PM after I sent out
>  the v4 patch-set at 3:53 PM. That's why it's missed in [PATCH v4 1/4].
> The tag would be added in next version.

After fixing the commit msg:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

[PATCH v4 2/4] arm64: dts: imx94: add pcie0 and pcie0-ep supports

[Richard Zhu]

Add pcie0 and pcie0-ep supports.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx94.dtsi | 86 ++++++++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi
index d2f31c8caf6e..2f75e8762b4e 100644
--- a/arch/arm64/boot/dts/freescale/imx94.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx94.dtsi
@@ -66,6 +66,13 @@ sai4_mclk: clock-sai4-mclk1 {
 		clock-output-names = "sai4_mclk";
 	};
 
+	clk_sys100m: clock-sys100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "clk_sys100m";
+	};
+
 	firmware {
 		scmi {
 			compatible = "arm,scmi";
@@ -1223,6 +1230,85 @@ wdog3: watchdog@49220000 {
 			};
 		};
 
+		hsio_blk_ctl: syscon@4c0100c0 {
+			compatible = "nxp,imx95-hsio-blk-ctl", "syscon";
+			reg = <0x0 0x4c0100c0 0x0 0x1>;
+			#clock-cells = <1>;
+			clocks = <&clk_sys100m>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+		};
+
+		pcie0: pcie@4c300000 {
+			compatible = "fsl,imx95-pcie";
+			reg = <0 0x4c300000 0 0x10000>,
+			      <0 0x60100000 0 0xfe00000>,
+			      <0 0x4c360000 0 0x10000>,
+			      <0 0x4c340000 0 0x4000>;
+			reg-names = "dbi", "config", "atu", "app";
+			ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
+				 <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x80000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			msi-map = <0x0 &its 0x10 0x1>,
+				  <0x100 &its 0x11 0x7>;
+			msi-map-mask = <0x1ff>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			num-viewport = <8>;
+			interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
+				 <&hsio_blk_ctl 0>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
+			assigned-clocks = <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX94_CLK_HSIOPLL>,
+					  <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+
+		pcie0_ep: pcie-ep@4c300000 {
+			compatible = "fsl,imx95-pcie-ep";
+			reg = <0 0x4c300000 0 0x10000>,
+			      <0 0x4c360000 0 0x1000>,
+			      <0 0x4c320000 0 0x1000>,
+			      <0 0x4c340000 0 0x4000>,
+			      <0 0x4c370000 0 0x10000>,
+			      <0x9 0 1 0>;
+			reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			clocks = <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			assigned-clocks =<&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+					 <&scmi_clk IMX94_CLK_HSIOPLL>,
+					 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+			msi-map = <0x0 &its 0x10 0x1>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+
 		netc_blk_ctrl: system-controller@4ceb0000 {
 			compatible = "nxp,imx94-netc-blk-ctrl";
 			reg = <0x0 0x4ceb0000 0x0 0x10000>,
-- 
2.37.1

Re: [PATCH v4 2/4] arm64: dts: imx94: add pcie0 and pcie0-ep supports

[Frank Li]

On Tue, Mar 10, 2026 at 03:54:57PM +0800, Richard Zhu wrote:
> Add pcie0 and pcie0-ep supports.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
...
> +				  <0x100 &its 0x11 0x7>;
> +			msi-map-mask = <0x1ff>;
> +			bus-range = <0x00 0xff>;
> +			num-lanes = <1>;
> +			num-viewport = <8>;
> +			interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "msi";

alex add "dma" irq for other soc.

Frank
> +			#interrupt-cells = <1>;
> --
> 2.37.1
>

RE: [PATCH v4 2/4] arm64: dts: imx94: add pcie0 and pcie0-ep supports

[Hongxing Zhu]

> -----Original Message-----
> From: Frank Li <frank.li@nxp.com>
> Sent: 2026年3月10日 23:06
> To: Hongxing Zhu <hongxing.zhu@nxp.com>
> Cc: robh@kernel.org; krzk+dt@kernel.org; conor+dt@kernel.org;
> bhelgaas@google.com; l.stach@pengutronix.de; lpieralisi@kernel.org;
> kwilczynski@kernel.org; mani@kernel.org; s.hauer@pengutronix.de;
> kernel@pengutronix.de; festevam@gmail.com; linux-pci@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; devicetree@vger.kernel.org;
> imx@lists.linux.dev; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v4 2/4] arm64: dts: imx94: add pcie0 and pcie0-ep
> supports
> 
> On Tue, Mar 10, 2026 at 03:54:57PM +0800, Richard Zhu wrote:
> > Add pcie0 and pcie0-ep supports.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > ---
> ...
> > +				  <0x100 &its 0x11 0x7>;
> > +			msi-map-mask = <0x1ff>;
> > +			bus-range = <0x00 0xff>;
> > +			num-lanes = <1>;
> > +			num-viewport = <8>;
> > +			interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "msi";
> 
> alex add "dma" irq for other soc.
> 
Okay, I see Alex is adding "dma" for i.MX8QM PCIe.

Would add it for i.MX94 PCIe too.
Thanks.

Best Regards
Richard Zhu

> Frank
> > +			#interrupt-cells = <1>;
> > --
> > 2.37.1
> >

Re: [PATCH v4 2/4] arm64: dts: imx94: add pcie0 and pcie0-ep supports

[Frank Li]

On Tue, Mar 10, 2026 at 03:54:57PM +0800, Richard Zhu wrote:
> Add pcie0 and pcie0-ep supports.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx94.dtsi | 86 ++++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi
> index d2f31c8caf6e..2f75e8762b4e 100644
> --- a/arch/arm64/boot/dts/freescale/imx94.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx94.dtsi
> @@ -66,6 +66,13 @@ sai4_mclk: clock-sai4-mclk1 {
>  		clock-output-names = "sai4_mclk";
>  	};
>
> +	clk_sys100m: clock-sys100m {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <100000000>;
> +		clock-output-names = "clk_sys100m";
> +	};
> +
>  	firmware {
>  		scmi {
>  			compatible = "arm,scmi";
> @@ -1223,6 +1230,85 @@ wdog3: watchdog@49220000 {
>  			};
>  		};
>
> +		hsio_blk_ctl: syscon@4c0100c0 {
> +			compatible = "nxp,imx95-hsio-blk-ctl", "syscon";
> +			reg = <0x0 0x4c0100c0 0x0 0x1>;
> +			#clock-cells = <1>;
> +			clocks = <&clk_sys100m>;
> +			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
> +		};
> +
> +		pcie0: pcie@4c300000 {
> +			compatible = "fsl,imx95-pcie";

You change binding, add fsl,imx94-pcie and fsl,imx943-pcie compatible string
and fallback to fsl,imx95-pcie

Frank
> +			reg = <0 0x4c300000 0 0x10000>,
> +			      <0 0x60100000 0 0xfe00000>,
> +			      <0 0x4c360000 0 0x10000>,
> +			      <0 0x4c340000 0 0x4000>;
> +			reg-names = "dbi", "config", "atu", "app";
> +			ranges = <0x81000000 0x0 0x00000000 0x0 0x6ff00000 0 0x00100000>,
> +				 <0x82000000 0x0 0x10000000 0x9 0x10000000 0 0x80000000>;
> +			#address-cells = <3>;
> +			#size-cells = <2>;
> +			device_type = "pci";
> +			linux,pci-domain = <2>;
> +			msi-map = <0x0 &its 0x10 0x1>,
> +				  <0x100 &its 0x11 0x7>;
> +			msi-map-mask = <0x1ff>;
> +			bus-range = <0x00 0xff>;
> +			num-lanes = <1>;
> +			num-viewport = <8>;
> +			interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "msi";
> +			#interrupt-cells = <1>;
> +			interrupt-map-mask = <0 0 0 0x7>;
> +			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
> +					<0 0 0 2 &gic 0 0 GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
> +					<0 0 0 3 &gic 0 0 GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
> +					<0 0 0 4 &gic 0 0 GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&scmi_clk IMX94_CLK_HSIO>,
> +				 <&scmi_clk IMX94_CLK_HSIOPLL>,
> +				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
> +				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
> +				 <&hsio_blk_ctl 0>;
> +			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
> +			assigned-clocks = <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
> +					  <&scmi_clk IMX94_CLK_HSIOPLL>,
> +					  <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
> +			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
> +			assigned-clock-parents = <0>, <0>,
> +						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
> +			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
> +			status = "disabled";
> +		};
> +
> +		pcie0_ep: pcie-ep@4c300000 {
> +			compatible = "fsl,imx95-pcie-ep";
> +			reg = <0 0x4c300000 0 0x10000>,
> +			      <0 0x4c360000 0 0x1000>,
> +			      <0 0x4c320000 0 0x1000>,
> +			      <0 0x4c340000 0 0x4000>,
> +			      <0 0x4c370000 0 0x10000>,
> +			      <0x9 0 1 0>;
> +			reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
> +			num-lanes = <1>;
> +			interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "dma";
> +			clocks = <&scmi_clk IMX94_CLK_HSIO>,
> +				 <&scmi_clk IMX94_CLK_HSIOPLL>,
> +				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
> +				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
> +			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
> +			assigned-clocks =<&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
> +					 <&scmi_clk IMX94_CLK_HSIOPLL>,
> +					 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
> +			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
> +			assigned-clock-parents = <0>, <0>,
> +						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
> +			msi-map = <0x0 &its 0x10 0x1>;
> +			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
> +			status = "disabled";
> +		};
> +
>  		netc_blk_ctrl: system-controller@4ceb0000 {
>  			compatible = "nxp,imx94-netc-blk-ctrl";
>  			reg = <0x0 0x4ceb0000 0x0 0x10000>,
> --
> 2.37.1
>

[PATCH v4 3/4] arm64: dts: imx943: add pcie1 and pcie1-ep supports

[Richard Zhu]

Add pcie1 and pcie1-ep supports.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx943.dtsi | 73 +++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx943.dtsi b/arch/arm64/boot/dts/freescale/imx943.dtsi
index 45b8da758e87..908bdac59139 100644
--- a/arch/arm64/boot/dts/freescale/imx943.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx943.dtsi
@@ -145,4 +145,77 @@ l3_cache: l3-cache {
 			cache-unified;
 		};
 	};
+
+	soc {
+		pcie1: pcie@4c380000 {
+			compatible = "fsl,imx95-pcie";
+			reg = <0 0x4c380000 0 0x10000>,
+			      <8 0x80100000 0 0xfe00000>,
+			      <0 0x4c3e0000 0 0x10000>,
+			      <0 0x4c3c0000 0 0x4000>;
+			reg-names = "dbi", "config", "atu", "app";
+			ranges = <0x81000000 0 0x00000000 0x8 0x8ff00000 0 0x00100000>,
+				 <0x82000000 0 0x10000000 0xa 0x10000000 0 0x80000000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			linux,pci-domain = <3>;
+			msi-map = <0x0 &its 0x98 0x1>,
+				  <0x100 &its 0x99 0x7>;
+			msi-map-mask = <0x1ff>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			num-viewport = <8>;
+			interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
+				 <&hsio_blk_ctl 0>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
+			assigned-clocks = <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX94_CLK_HSIOPLL>,
+					  <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+
+		pcie1_ep: pcie-ep@4c380000 {
+			compatible = "fsl,imx95-pcie-ep";
+			reg = <0 0x4c380000 0 0x10000>,
+			      <0 0x4c3e0000 0 0x1000>,
+			      <0 0x4c3a0000 0 0x1000>,
+			      <0 0x4c3c0000 0 0x4000>,
+			      <0 0x4c3f0000 0 0x10000>,
+			      <0xa 0 1 0>;
+			reg-names = "dbi", "atu", "dbi2", "app", "dma", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			clocks = <&scmi_clk IMX94_CLK_HSIO>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL>,
+				 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+				 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			assigned-clocks = <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX94_CLK_HSIOPLL>,
+					  <&scmi_clk IMX94_CLK_HSIOPCIEAUX>;
+			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
+			assigned-clock-parents = <0>, <0>,
+						 <&scmi_clk IMX94_CLK_SYSPLL1_PFD1_DIV2>;
+			msi-map = <0x0 &its 0x98 0x1>;
+			power-domains = <&scmi_devpd IMX94_PD_HSIO_TOP>;
+			status = "disabled";
+		};
+	};
 };
-- 
2.37.1

[PATCH v4 4/4] arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1] support

[Richard Zhu]

Add pcie[0,1] and pcie-ep[0,1] support.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 arch/arm64/boot/dts/freescale/Makefile       |  4 +
 arch/arm64/boot/dts/freescale/imx943-evk.dts | 82 ++++++++++++++++++++
 2 files changed, 86 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 25793aa7c0ab..0885e67e0cfa 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -451,6 +451,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb
 
+imx943-evk-pcie0-ep-dtbs += imx943-evk.dtb imx-pcie0-ep.dtbo
+imx943-evk-pcie1-ep-dtbs += imx943-evk.dtb imx-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx943-evk-pcie0-ep.dtb imx943-evk-pcie1-ep.dtb
+
 imx95-15x15-evk-pcie0-ep-dtbs = imx95-15x15-evk.dtb imx-pcie0-ep.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk-pcie0-ep.dtb
 imx95-19x19-evk-pcie0-ep-dtbs += imx95-19x19-evk.dtb imx-pcie0-ep.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts
index c8ceabe3d923..adcb3fa3c9de 100644
--- a/arch/arm64/boot/dts/freescale/imx943-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts
@@ -50,6 +50,20 @@ chosen {
 		stdout-path = &lpuart1;
 	};
 
+	pcie_ref_clk: clock-pcie-ref {
+		compatible = "gpio-gate-clock";
+		clocks = <&xtal25m>;
+		#clock-cells = <0>;
+		enable-gpios = <&pca9670_i2c3 7 GPIO_ACTIVE_LOW>;
+	};
+
+	xtal25m: clock-xtal25m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "xtal_25MHz";
+	};
+
 	dmic: dmic {
 		compatible = "dmic-codec";
 		#sound-dai-cells = <0>;
@@ -71,6 +85,15 @@ reg_m2_pwr: regulator-m2-pwr {
 		startup-delay-us = <5000>;
 	};
 
+	reg_slot_pwr: regulator-slot-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIe slot-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pcal6416_i2c3_u46 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_m2_wlan: regulator-wlan {
 		compatible = "regulator-fixed";
 		regulator-name = "WLAN_EN";
@@ -653,6 +676,18 @@ IMX94_PAD_GPIO_IO28__LPI2C6_SCL		0x40000b9e
 		>;
 	};
 
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO20__PCIE1_CLKREQ_B	0x4000031e
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			IMX94_PAD_GPIO_IO23__PCIE2_CLKREQ_B	0x4000031e
+		>;
+	};
+
 	pinctrl_pdm: pdmgrp {
 		fsl,pins = <
 			IMX94_PAD_PDM_CLK__PDM_CLK			0x31e
@@ -821,6 +856,53 @@ IMX94_PAD_XSPI1_DQS__XSPI1_A_DQS	0x3fe
 	};
 };
 
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	clocks = <&scmi_clk IMX94_CLK_HSIO>,
+		 <&scmi_clk IMX94_CLK_HSIOPLL>,
+		 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+		 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
+		 <&hsio_blk_ctl 0>,
+		 <&pcie_ref_clk>;
+	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux",
+		      "ref", "extref";
+	reset-gpio = <&pcal6416_i2c3_u46 3 GPIO_ACTIVE_LOW>;
+	vpcie3v3aux-supply = <&reg_m2_wlan>;
+	supports-clkreq;
+	status = "okay";
+};
+
+&pcie0_ep {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	vpcie3v3aux-supply = <&reg_m2_wlan>;
+	status = "disabled";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	clocks = <&scmi_clk IMX94_CLK_HSIO>,
+		 <&scmi_clk IMX94_CLK_HSIOPLL>,
+		 <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+		 <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
+		 <&hsio_blk_ctl 0>,
+		 <&pcie_ref_clk>;
+	clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux",
+		      "ref", "extref";
+	reset-gpio = <&pcal6416_i2c3_u46 1 GPIO_ACTIVE_LOW>;
+	vpcie3v3aux-supply = <&reg_slot_pwr>;
+	status = "okay";
+};
+
+&pcie1_ep {
+	pinctrl-0 = <&pinctrl_pcie1>;
+	pinctrl-names = "default";
+	vpcie3v3aux-supply = <&reg_slot_pwr>;
+	status = "disabled";
+};
+
 &usdhc1 {
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-- 
2.37.1