messages from 2026-02-16 08:11:59 to 2026-02-18 19:44:22 UTC [more...]
[PATCH 0/4] ARM: dts: TQMa6UL: modify for use in bootloaders
2026-02-18 19:44 UTC (8+ messages)
` [PATCH 1/4] ARM: dts: imx6ul/imx6ull: add boot phase properties
` [PATCH 2/4] ARM: dts: imx6ul[l]-tqma6ul[l]: "
` [PATCH 3/4] ARM: dts: mba6ulx: "
` [PATCH 4/4] ARM: dts: tqma6ul[l]: correct spelling of TQ-Systems
[PATCH 0/4] ARM: dts: TQMa6: modify for use in bootloaders
2026-02-18 19:42 UTC (7+ messages)
` [PATCH 1/4] ARM: dts: imx6qdl-tqma6: add missing labels
` [PATCH 2/4] ARM: dts: imx6qdl: add boot phase properties
` [PATCH 3/4] ARM: dts: imx6qdl-tqma6: "
` [PATCH 4/4] ARM: dts: imx6qdl-mba6: "
[PATCH 0/4] ARM: dts: imx: cleanup iomux related CHECK_DTBS warnings for imx1, imx25 and imx27
2026-02-18 18:39 UTC (3+ messages)
` [PATCH 1/4] dt-bindings: pinctrl: convert fsl,imx27-pinctrl.txt to YAML
[PATCH v1 00/11] arm64: dts: freescale: imx8mm-var-som: Align SOM and Symphony DTSs
2026-02-18 17:18 UTC (22+ messages)
` [PATCH v1 01/11] arm64: dts: imx8mm-var-som: Move UART4 description to Symphony carrier
` [PATCH v1 02/11] arm64: dts: freescale: imx8mm-var-som: Align fsl,pins tables
` [PATCH v1 03/11] arm64: dts: freescale: imx8mm-var-som: Update FEC support with MaxLinear PHY
` [PATCH v1 04/11] arm64: dts: imx8mm-var-som: Add support for WM8904 audio codec
` [PATCH v1 05/11] arm64: dts: freescale: imx8mm-var-som: Add MCP251xFD CAN controller
` [PATCH v1 06/11] arm64: dts: freescale: imx8mm-var-som: Update WiFi/BT configuration
` [PATCH v1 07/11] arm64: dts: imx8mm-var-som-symphony: Move USB configuration from SOM
` [PATCH v1 08/11] arm64: dts: imx8mm-var-som-symphony: Enable uSD on USDHC2
` [PATCH v1 09/11] arm64: dts: imx8mm-var-som-symphony: Add TPM2 support
` [PATCH v1 10/11] arm64: dts: freescale: imx8mm-var-som-symphony: Enable I2C4
` [PATCH v1 11/11] arm64: dts: imx8mm-var-som-symphony: Enable PCIe
[PATCH 0/3] ARM: dts: TQMa7: modify for use in bootloaders
2026-02-18 17:17 UTC (7+ messages)
` [PATCH 1/3] ARM: dts: imx7s: add boot phase properties
` [PATCH 2/3] ARM: dts: tqma7: "
` [PATCH 3/3] ARM: dts: imx7-mba7: disable boot_cfg pins after boot
` [PATCH 3/3 v2] ARM: dts: imx7-mba7: separate BOOT_CFG circuits "
[PATCH 0/4] Kontron i.MX8MP OSM Devicetree Fixups
2026-02-18 17:02 UTC (9+ messages)
` [PATCH 1/4] arm64: dts: imx8mp-kontron: Fix touch reset configuration on DL devices
` [PATCH 2/4] arm64: dts: imx8mp-kontron: Fix SD card supply on SMARC eval carrier
` [PATCH 3/4] arm64: dts: imx8mp-kontron: Fix boot order for PMIC and RTC
` [PATCH 4/4] arm64: dts: imx8mp-kontron: Use GPIO/IRQ defines in DL devicetree
[PATCH v1 0/2] i2c: imx: fix i2c issues when reading messages
2026-02-18 16:37 UTC (6+ messages)
` [PATCH v1 1/2] i2c: imx: fix i2c issue when reading multiple messages
` [PATCH v1 2/2] i2c: imx: ensure no clock is generated after last read
[PATCH v8 0/4] Enable Remote GPIO over RPMSG on i.MX Platform
2026-02-18 16:28 UTC (4+ messages)
` [PATCH v8 3/4] gpio: rpmsg: add generic rpmsg GPIO driver
[PATCH 00/13] Add DMA support for LINFlexD UART driver
2026-02-18 14:44 UTC (30+ messages)
` [PATCH 01/13] serial: linflexuart: Fix locking in set_termios
` [PATCH 02/13] serial: linflexuart: Clean SLEEP bit in LINCR1 after suspend
` [PATCH 03/13] serial: linflexuart: Check FIFO full before writing
` [PATCH 04/13] serial: linflexuart: Correctly clear UARTSR in buffer mode
` [PATCH 05/13] serial: linflexuart: Update RXEN/TXEN outside INITM mode
` [PATCH 06/13] serial: linflexuart: Ensure FIFO is empty when entering INITM
` [PATCH 07/13] serial: linflexuart: Revert earlycon workaround
` [PATCH 08/13] dt-bindings: serial: fsl-linflexuart: add clock input properties
` [PATCH 09/13] dt-bindings: serial: fsl-linflexuart: add dma properties
` [PATCH 10/13] serial: linflexuart: Add support for changing baudrate
` [PATCH 11/13] serial: linflexuart: Add support for configurable stop bits
` [PATCH 12/13] serial: linflexuart: Add DMA support
` [PATCH 13/13] serial: linflexuart: Avoid stopping DMA during receive operations
[PATCH 0/9] PCI: endpoint differentiate between disabled and reserved BARs
2026-02-17 23:00 UTC (7+ messages)
` [PATCH 1/9] PCI: endpoint: Introduce pci_epc_bar_type BAR_64BIT_UPPER
` [PATCH 5/9] PCI: dwc: Replace BAR_RESERVED with BAR_DISABLED in glue drivers
` [PATCH 6/9] PCI: dwc: Disable BARs in common code instead of in each glue driver
[net-next v23 0/7] net: mtip: Add support for MTIP imx287 L2 switch driver
2026-02-17 21:59 UTC (6+ messages)
` [net-next v23 2/7] net: mtip: The L2 switch driver for imx287
[PATCH RFC net-next 0/9] net: stmmac: qcom-ethqos: cleanups and re-organise SerDes handling
2026-02-17 18:40 UTC (21+ messages)
` [PATCH RFC net-next 1/9] net: stmmac: qcom-ethqos: rename "por" memebers to "rgmii_por"
` [PATCH RFC net-next 2/9] net: stmmac: qcom-ethqos: remove register field value obfuscations
` [PATCH RFC net-next 3/9] net: stmmac: qcom-ethqos: change ethqos_configure*() to return void
` [PATCH RFC net-next 4/9] net: stmmac: qcom-ethqos: move qcom_ethqos_set_sgmii_loopback() up
` [PATCH RFC net-next 5/9] net: stmmac: qcom-ethqos: move loopback disable to .mac_finish()
` [PATCH RFC net-next 7/9] net: stmmac: qcom-ethqos: pass phy interface mode to configs
` [PATCH RFC net-next 8/9] net: stmmac: qcom-ethqos: use phy interface mode for inband
` [PATCH RFC net-next 9/9] net: stmmac: qcom-ethqos: move SerDes speed configuration
[PATCH bpf v3 0/9] Address XDP frags having negative tailroom
2026-02-17 16:19 UTC (16+ messages)
` [PATCH bpf v3 1/9] xdp: use modulo operation to calculate XDP frag tailroom
` [PATCH bpf v3 2/9] xsk: introduce helper to determine rxq->frag_size
` [PATCH bpf v3 3/9] ice: fix rxq info registering in mbuf packets
` [PATCH bpf v3 4/9] ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
` [PATCH bpf v3 5/9] i40e: fix registering XDP RxQ info
` [PATCH bpf v3 6/9] i40e: use xdp.frame_sz as XDP RxQ info frag_size
` [PATCH bpf v3 7/9] libeth, idpf: use truesize "
` [PATCH bpf v3 8/9] net: enetc: "
` [PATCH bpf v3 9/9] xdp: produce a warning when calculated tailroom is negative
[PATCH 0/4] ARM: dts: imx: {bx50v3,b850v3}: Update device trees
2026-02-17 15:15 UTC (13+ messages)
` [PATCH 1/4] ARM: dts: imx: bx50v3: Configure switch PHY max-speed
` [PATCH 2/4] ARM: dts: imx: bx50v3: Configure phy-mode
` [PATCH 3/4] ARM: dts: imx: b850v3: Define GPIO line names
` [PATCH 4/4] ARM: dts: imx: b850v3: Disable usdhc4
[PATCH V2 0/5] ARM: dts: imx: {bx50v3,b850v3}: Update device trees
2026-02-17 15:06 UTC (7+ messages)
` [PATCH V2 1/5] ARM: dts: imx: bx50v3: Configure switch PHY max-speed
` [PATCH V2 2/5] ARM: dts: imx: bx50v3: Configure phy-mode
` [PATCH V2 3/5] ARM: dts: imx: b850v3: Use alphabetical sorting
` [PATCH V2 4/5] ARM: dts: imx: b850v3: Define GPIO line names
` [PATCH V2 5/5] ARM: dts: imx: b850v3: Disable usdhc4
[PATCH] PCI: layerscape: Allow to compile as module
2026-02-17 14:00 UTC (3+ messages)
[PATCH] clk: imx: pll14xx: Add 756 MHz entry for PLL1443x
2026-02-17 11:12 UTC (4+ messages)
[PATCH v3 0/6] media: synopsys: Add imx93 support
2026-02-17 7:48 UTC (8+ messages)
` [PATCH v3 1/6] media: synopsys: csi2rx: use devm_reset_control_get_optional_exclusive()
` [PATCH v3 2/6] media: synopsys: csi2rx: only check errors from devm_clk_bulk_get_all()
` [PATCH v3 3/6] media: synopsys: csi2rx: implement .get_frame_desc() callback
` [PATCH v3 4/6] media: synopsys: csi2rx: Use enum and u32 array for register offsets
` [PATCH v3 5/6] media: dt-bindings: add NXP i.MX93 compatible string
` [PATCH v3 6/6] media: synopsys: csi2rx: add i.MX93 support
[PATCH v3 00/15] mailbox: Stop sending NULL mailbox messages
2026-02-16 18:09 UTC (3+ messages)
` [PATCH v3 01/15] mailbox: Deprecate NULL mbox messages; Introduce mbox_ring_doorbell()
` [PATCH v3 04/15] firmware: imx-dsp: Use mbox_ring_doorbell() instead of NULL message
[PATCH v9 0/3] Add i.MX91/93 parallel display support
2026-02-16 16:47 UTC (3+ messages)
[PATCH] i3c: master: svc: spelling corrections
2026-02-16 16:28 UTC (4+ messages)
[PATCH V5 00/12] pci-imx6: Add support for parsing the reset property in new Root Port binding
2026-02-16 16:25 UTC (6+ messages)
` [PATCH V5 02/12] PCI: host-generic: Add common helpers for parsing Root Port properties
` [PATCH V5 03/12] PCI: dwc: Allow external allocation of pci_host_bridge
[PATCH v2 0/6] media: synopsys: Add imx93 support
2026-02-16 15:52 UTC (11+ messages)
` [PATCH v2 3/6] media: synopsys: csi2rx: implement .get_frame_desc() callback
` [PATCH v2 4/6] media: synopsys: csi2rx: Use enum and u32 array for register offsets
` [PATCH v2 5/6] media: dt-bindings: add NXP i.MX93 compatible string
` [PATCH v2 6/6] media: synopsys: csi2rx: add i.MX93 support
[PATCH 0/2] PCI: dwc: Add multi-port controller support
2026-02-16 15:35 UTC (5+ messages)
` [PATCH 1/2] PCI: API changes for "
` [PATCH 2/2] PCI: dwc: Add "
[PATCH bpf v2 0/9] Address XDP frags having negative tailroom
2026-02-16 15:17 UTC (6+ messages)
` [PATCH bpf v2 7/9] idpf: use truesize as XDP RxQ info frag_size
[PATCH 0/2] drm/imx: ipuv3-plane: support underlay plane
2026-02-16 13:18 UTC (5+ messages)
` [PATCH 1/2] drm/imx: ipuv3-plane: decouple zpos from plane type
` [PATCH 2/2] drm/imx: ipuv3-plane: support underlay plane
[PATCH v8 0/5] arm64: dts: freescale: add support for the GOcontroll Moduline IV/Mini
2026-02-16 13:07 UTC (6+ messages)
` [PATCH v8 1/5] dt-bindings: arm: fsl: Add "
` [PATCH v8 2/5] arm64: dts: imx8mm: Add pinctrl config definitions
` [PATCH v8 3/5] arm64: dts: freescale: add Ka-Ro Electronics tx8m-1610 COM
` [PATCH v8 4/5] arm64: dts: freescale: Add the GOcontroll Moduline IV
` [PATCH v8 5/5] arm64: dts: freescale: Add the GOcontroll Moduline Mini
[PATCH v4 0/4] clk: vf610: Add clocks to support MTIP L2 switch
2026-02-16 11:33 UTC (5+ messages)
[PATCH] firmware: imx: sm-misc: Make scmi_imx_misc_ctrl_nb variable static
2026-02-16 11:14 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox