From: Richard Leitner <richard.leitner@linux.dev>
To: imx@lists.linux.dev
Subject: I2C_IMX support for i.MX8MP
Date: Wed, 17 Aug 2022 12:38:53 +0200 [thread overview]
Message-ID: <YvzFPR5rwVSLzNPK@skidata.com> (raw)
Hi list,
Just found out about this imx ML and I'm not sure if it is also intended
for questions, but I'll give it a try. Please correct me if I'm wrong.
We are currently in the process of creating a BSP for a custom i.MX8MP
based board which features 3 I2C busses. Unfortunately I'm currently
unable to get them to live with the i2c-imx or i2c-imxlpi2c drivers.
Using i2c-gpio (with adapted SW_MUX_CTL and unchanged SW_PAD_CTL)
works fine.
I'm aware of ERR007805 and tried therefore to configure the busses to
200kHz, but I don't get any signals/edges on the pins.
So the basic question for me is (as I was unable to find any trustworthy
answers on the net) if the i2c-imx driver supports the i.MX8MP at all?
Any feedback is warmly welcome!
regards;rl
P.S. All tests were done with mainline linux 5.19.y.
P.P.S I've also sent this mail to linux-imx@nxp.com before.
next reply other threads:[~2022-08-17 10:39 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-17 10:38 Richard Leitner [this message]
2022-08-17 14:01 ` [EXT] I2C_IMX support for i.MX8MP Shenwei Wang
2022-08-17 14:07 ` Richard Leitner
2022-08-17 14:14 ` Shenwei Wang
2022-08-18 6:55 ` Richard Leitner
2022-08-18 8:40 ` Richard Leitner
2022-08-18 11:59 ` Shenwei Wang
2022-08-18 12:54 ` David Wolfson
2022-08-18 13:47 ` Richard Leitner
2022-08-29 7:00 ` Richard Leitner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YvzFPR5rwVSLzNPK@skidata.com \
--to=richard.leitner@linux.dev \
--cc=imx@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox