* [RFC] arm64: dts: freescale: imx93-var-som: Align dts adding missing components
@ 2025-09-22 16:11 Stefano Radaelli
2025-09-22 20:43 ` Fabio Estevam
0 siblings, 1 reply; 3+ messages in thread
From: Stefano Radaelli @ 2025-09-22 16:11 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
devicetree, imx
Hi all,
the current device tree for the i.MX93 VAR-SOM is incomplete.
In particular, several peripherals that are present on the hardware
are not yet described, such as:
- audio codec
- PMIC
- WiFi + Bluetooth module
My plan is to align the DTS with the actual hardware by adding these
missing nodes.
Before preparing the patches, I would like to ask for your advice:
should I send one patch that performs the full DTS alignment (describing the
patch as an alignemnt of the dts with the actual hardware), or would
you prefer a patch series with one patch per peripheral (e.g. one for
codec, one for PMIC, one for WiFi/BT, etc.)?
I will do the same with the other Variscite SOMs and Carrier Boards
Thanks for your guidance.
Best regards,
Stefano
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [RFC] arm64: dts: freescale: imx93-var-som: Align dts adding missing components
2025-09-22 16:11 [RFC] arm64: dts: freescale: imx93-var-som: Align dts adding missing components Stefano Radaelli
@ 2025-09-22 20:43 ` Fabio Estevam
2025-09-22 20:47 ` Stefano Radaelli
0 siblings, 1 reply; 3+ messages in thread
From: Fabio Estevam @ 2025-09-22 20:43 UTC (permalink / raw)
To: Stefano Radaelli
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, devicetree, imx
Hi Stefano,
On Mon, Sep 22, 2025 at 1:11 PM Stefano Radaelli
<stefano.radaelli21@gmail.com> wrote:
> Before preparing the patches, I would like to ask for your advice:
> should I send one patch that performs the full DTS alignment (describing the
> patch as an alignemnt of the dts with the actual hardware), or would
> you prefer a patch series with one patch per peripheral (e.g. one for
> codec, one for PMIC, one for WiFi/BT, etc.)?
Sending a patch series with one patch per peripheral is preferred.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [RFC] arm64: dts: freescale: imx93-var-som: Align dts adding missing components
2025-09-22 20:43 ` Fabio Estevam
@ 2025-09-22 20:47 ` Stefano Radaelli
0 siblings, 0 replies; 3+ messages in thread
From: Stefano Radaelli @ 2025-09-22 20:47 UTC (permalink / raw)
To: Fabio Estevam
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, devicetree, imx
Hi Fabio,
On Mon, Sep 22, 2025 at 05:43:15PM -0300, Fabio Estevam wrote:
> Hi Stefano,
>
> On Mon, Sep 22, 2025 at 1:11 PM Stefano Radaelli
> <stefano.radaelli21@gmail.com> wrote:
>
> > Before preparing the patches, I would like to ask for your advice:
> > should I send one patch that performs the full DTS alignment (describing the
> > patch as an alignemnt of the dts with the actual hardware), or would
> > you prefer a patch series with one patch per peripheral (e.g. one for
> > codec, one for PMIC, one for WiFi/BT, etc.)?
>
> Sending a patch series with one patch per peripheral is preferred.
Great, thank you so much for the info!
Best Regards,
Stefano
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2025-09-22 20:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-09-22 16:11 [RFC] arm64: dts: freescale: imx93-var-som: Align dts adding missing components Stefano Radaelli
2025-09-22 20:43 ` Fabio Estevam
2025-09-22 20:47 ` Stefano Radaelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox