Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@nxp.com>
To: Alex Elder <elder@riscstar.com>
Cc: han.xu@nxp.com, broonie@kernel.org, dlan@gentoo.org,
	guodong@riscstar.com, linux-spi@vger.kernel.org,
	imx@lists.linux.dev, spacemit@lists.linux.dev,
	linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 5/9] spi: fsl-qspi: add a clock disable quirk
Date: Thu, 23 Oct 2025 22:07:05 -0400	[thread overview]
Message-ID: <aPrfSVEP5xasMEBr@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <a43b6ddf-c552-4db8-89cc-49951015161d@riscstar.com>

On Thu, Oct 23, 2025 at 07:04:10PM -0500, Alex Elder wrote:
> On 10/23/25 6:36 PM, Frank Li wrote:
> > On Thu, Oct 23, 2025 at 12:59:17PM -0500, Alex Elder wrote:
> > > The SpacemiT K1 SoC QSPI implementation needs to avoid shutting off the
> > > clock when changing its rate.  Add a new quirk to indicate that disabling
> > > and enabling the clock should be skipped when changing its rate for
> > > operations.
> >
> > remove "for operations."
>
> OK.
>
> > >
> > > Signed-off-by: Alex Elder <elder@riscstar.com>
> > > ---
> > > v2: - The quirk flag is now named QUADSPI_QUIRK_SKIP_CLK_DISABLE
> > >      - The predicate now returns bool and is not inline
> > >
> > >   drivers/spi/spi-fsl-qspi.c | 21 +++++++++++++++++----
> > >   1 file changed, 17 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c
> > > index 1944e63169d36..c21e3804cb032 100644
> > > --- a/drivers/spi/spi-fsl-qspi.c
> > > +++ b/drivers/spi/spi-fsl-qspi.c
> > > @@ -197,6 +197,11 @@
> > >    */
> > >   #define QUADSPI_QUIRK_USE_TDH_SETTING	BIT(5)
> > >
> > > +/*
> > > + * Do not disable the "qspi" clock when changing its rate.
> > > + */
> > > +#define QUADSPI_QUIRK_SKIP_CLK_DISABLE	BIT(6)
> > > +
> > >   struct fsl_qspi_devtype_data {
> > >   	unsigned int rxfifo;
> > >   	unsigned int txfifo;
> > > @@ -306,6 +311,11 @@ static bool needs_tdh_setting(struct fsl_qspi *q)
> > >   	return !!(q->devtype_data->quirks & QUADSPI_QUIRK_USE_TDH_SETTING);
> > >   }
> > >
> > > +static inline bool needs_clk_disable(struct fsl_qspi *q)
> >
> > needs_skip_clk_disable()
>
> OK.  I was trying to avoid the double-negative:
>
>     if (!needs_skip_clk_disasble())
> 	clk_disable...()

Oh, Make senso, needs_clk_disable() is fine

Frank

>
> But I'll do as you suggest.
>
> Thanks.
>
> 					-Alex
> >
> > Frank
> > > +{
> > > +	return !(q->devtype_data->quirks & QUADSPI_QUIRK_SKIP_CLK_DISABLE);
> > > +}
> > > +
> > >   /*
> > >    * An IC bug makes it necessary to rearrange the 32-bit data.
> > >    * Later chips, such as IMX6SLX, have fixed this bug.
> > > @@ -536,15 +546,18 @@ static void fsl_qspi_select_mem(struct fsl_qspi *q, struct spi_device *spi,
> > >   	if (needs_4x_clock(q))
> > >   		rate *= 4;
> > >
> > > -	fsl_qspi_clk_disable_unprep(q);
> > > +	if (needs_clk_disable(q))
> > > +		fsl_qspi_clk_disable_unprep(q);
> > >
> > >   	ret = clk_set_rate(q->clk, rate);
> > >   	if (ret)
> > >   		return;
> > >
> > > -	ret = fsl_qspi_clk_prep_enable(q);
> > > -	if (ret)
> > > -		return;
> > > +	if (needs_clk_disable(q)) {
> > > +		ret = fsl_qspi_clk_prep_enable(q);
> > > +		if (ret)
> > > +			return;
> > > +	}
> > >
> > >   	q->selected = spi_get_chipselect(spi, 0);
> > >
> > > --
> > > 2.43.0
> > >
>

  reply	other threads:[~2025-10-24  2:07 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-23 17:59 [PATCH v2 0/9] spi: enable the SpacemiT K1 SoC QSPI Alex Elder
2025-10-23 17:59 ` [PATCH v2 1/9] dt-bindings: spi: fsl-qspi: support SpacemiT K1 Alex Elder
2025-10-23 18:51   ` Conor Dooley
2025-10-23 23:29   ` Frank Li
2025-10-23 17:59 ` [PATCH v2 2/9] dt-bindings: spi: fsl-qspi: add optional resets Alex Elder
2025-10-23 18:52   ` Conor Dooley
2025-10-23 23:32   ` Frank Li
2025-10-24  0:04     ` Alex Elder
2025-10-23 17:59 ` [PATCH v2 3/9] spi: fsl-qspi: add optional reset support Alex Elder
2025-10-23 17:59 ` [PATCH v2 4/9] spi: fsl-qspi: switch predicates to bool Alex Elder
2025-10-23 23:33   ` Frank Li
2025-10-24  0:04     ` Alex Elder
2025-10-23 17:59 ` [PATCH v2 5/9] spi: fsl-qspi: add a clock disable quirk Alex Elder
2025-10-23 23:36   ` Frank Li
2025-10-24  0:04     ` Alex Elder
2025-10-24  2:07       ` Frank Li [this message]
2025-10-24  2:31         ` Alex Elder
2025-10-23 17:59 ` [PATCH v2 6/9] spi: fsl-qspi: allot 1KB per chip Alex Elder
2025-10-23 23:38   ` Frank Li
2025-10-24  0:04     ` Alex Elder
2025-10-23 17:59 ` [PATCH v2 7/9] spi: fsl-qspi: support the SpacemiT K1 SoC Alex Elder
2025-10-23 19:56   ` han.xu
2025-10-24  0:04     ` Alex Elder
2025-10-23 23:41   ` Frank Li
2025-10-24  0:04     ` Alex Elder

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aPrfSVEP5xasMEBr@lizhi-Precision-Tower-5810 \
    --to=frank.li@nxp.com \
    --cc=broonie@kernel.org \
    --cc=dlan@gentoo.org \
    --cc=elder@riscstar.com \
    --cc=guodong@riscstar.com \
    --cc=han.xu@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=spacemit@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox