From: Alex Elder <elder@riscstar.com>
To: Frank Li <Frank.li@nxp.com>
Cc: broonie@kernel.org, han.xu@nxp.com, dlan@gentoo.org,
guodong@riscstar.com, linux-spi@vger.kernel.org,
imx@lists.linux.dev, spacemit@lists.linux.dev,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 7/9] spi: fsl-qspi: support the SpacemiT K1 SoC
Date: Thu, 23 Oct 2025 19:04:22 -0500 [thread overview]
Message-ID: <f1da325a-af36-4759-b3e6-6b0a4e9eb13c@riscstar.com> (raw)
In-Reply-To: <aPq9LHwtALpsOIwz@lizhi-Precision-Tower-5810>
On 10/23/25 6:41 PM, Frank Li wrote:
> On Thu, Oct 23, 2025 at 12:59:19PM -0500, Alex Elder wrote:
>> Allow the SPI_FSL_QUADSPI Kconfig option to be selected if ARCH_SPACEMIT
>> enabled.
>>
>> Add support for the SpacemiT K1 SoC in the Freescale QSPI driver by
>> defining the device type data for its QSPI implementation.
>>
>> Signed-off-by: Alex Elder <elder@riscstar.com>
>> ---
>> v2: - A continued line the Kconfig file is now aligned
>>
>> drivers/spi/Kconfig | 3 ++-
>> drivers/spi/spi-fsl-qspi.c | 10 ++++++++++
>> 2 files changed, 12 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
>> index 4d8f00c850c14..592d46c9998bb 100644
>> --- a/drivers/spi/Kconfig
>> +++ b/drivers/spi/Kconfig
>> @@ -435,7 +435,8 @@ config SPI_FSL_LPSPI
>>
>> config SPI_FSL_QUADSPI
>> tristate "Freescale QSPI controller"
>> - depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
>> + depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || \
>> + ARCH_SPACEMIT || COMPILE_TEST
>> depends on HAS_IOMEM
>> help
>> This enables support for the Quad SPI controller in master mode.
>> diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c
>> index a474d1b341b6a..d4b007e8172b2 100644
>> --- a/drivers/spi/spi-fsl-qspi.c
>> +++ b/drivers/spi/spi-fsl-qspi.c
>> @@ -268,6 +268,15 @@ static const struct fsl_qspi_devtype_data ls2080a_data = {
>> .little_endian = true,
>> };
>>
>> +static const struct fsl_qspi_devtype_data spacemit_k1_data = {
>> + .rxfifo = SZ_128,
>> + .txfifo = SZ_256,
>> + .ahb_buf_size = SZ_512,
>> + .invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
>> + .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_SKIP_CLK_DISABLE,
>> + .little_endian = true,
>
> did you test your code? miss set sfa_size here.
I confessed earlier I did not, and I'm very sorry about that.
No future version will be sent until it's all tested.
-Alex
>
> Frank
>
>> +};
>> +
>> struct fsl_qspi {
>> void __iomem *iobase;
>> void __iomem *ahb_addr;
>> @@ -1003,6 +1012,7 @@ static const struct of_device_id fsl_qspi_dt_ids[] = {
>> { .compatible = "fsl,imx6ul-qspi", .data = &imx6ul_data, },
>> { .compatible = "fsl,ls1021a-qspi", .data = &ls1021a_data, },
>> { .compatible = "fsl,ls2080a-qspi", .data = &ls2080a_data, },
>> + { .compatible = "spacemit,k1-qspi", .data = &spacemit_k1_data, },
>> { /* sentinel */ }
>> };
>> MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
>> --
>> 2.43.0
>>
prev parent reply other threads:[~2025-10-24 0:04 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-23 17:59 [PATCH v2 0/9] spi: enable the SpacemiT K1 SoC QSPI Alex Elder
2025-10-23 17:59 ` [PATCH v2 1/9] dt-bindings: spi: fsl-qspi: support SpacemiT K1 Alex Elder
2025-10-23 18:51 ` Conor Dooley
2025-10-23 23:29 ` Frank Li
2025-10-23 17:59 ` [PATCH v2 2/9] dt-bindings: spi: fsl-qspi: add optional resets Alex Elder
2025-10-23 18:52 ` Conor Dooley
2025-10-23 23:32 ` Frank Li
2025-10-24 0:04 ` Alex Elder
2025-10-23 17:59 ` [PATCH v2 3/9] spi: fsl-qspi: add optional reset support Alex Elder
2025-10-23 17:59 ` [PATCH v2 4/9] spi: fsl-qspi: switch predicates to bool Alex Elder
2025-10-23 23:33 ` Frank Li
2025-10-24 0:04 ` Alex Elder
2025-10-23 17:59 ` [PATCH v2 5/9] spi: fsl-qspi: add a clock disable quirk Alex Elder
2025-10-23 23:36 ` Frank Li
2025-10-24 0:04 ` Alex Elder
2025-10-24 2:07 ` Frank Li
2025-10-24 2:31 ` Alex Elder
2025-10-23 17:59 ` [PATCH v2 6/9] spi: fsl-qspi: allot 1KB per chip Alex Elder
2025-10-23 23:38 ` Frank Li
2025-10-24 0:04 ` Alex Elder
2025-10-23 17:59 ` [PATCH v2 7/9] spi: fsl-qspi: support the SpacemiT K1 SoC Alex Elder
2025-10-23 19:56 ` han.xu
2025-10-24 0:04 ` Alex Elder
2025-10-23 23:41 ` Frank Li
2025-10-24 0:04 ` Alex Elder [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f1da325a-af36-4759-b3e6-6b0a4e9eb13c@riscstar.com \
--to=elder@riscstar.com \
--cc=Frank.li@nxp.com \
--cc=broonie@kernel.org \
--cc=dlan@gentoo.org \
--cc=guodong@riscstar.com \
--cc=han.xu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=spacemit@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox