Re: [PATCH v2] PCI: imx6: Add runtime PM support for i.MX95

[Frank Li <Frank.li@oss.nxp.com>]

On Wed, Jul 08, 2026 at 11:59:26AM +0800, hongxing.zhu@oss.nxp.com wrote:
> From: Richard Zhu <hongxing.zhu@nxp.com>
>
> Enable runtime PM support for i.MX95 PCIe Root Complex to allow dynamic
> power management when the PCIe link is idle.
>
> The i.MX95 PCIe controller supports entering D3hot state when PCIe
> devices are not actively in use. This implementation uses
> pm_runtime_no_callbacks() to leverage the PCI core's generic runtime PM
> handling. The PCI core automatically manages D-state transitions based
> on the runtime PM state of connected endpoint devices.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> Changes in v2:
> Use devm_pm_runtime_set_active_enabled() simplify the codes and error
> path.
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index eae495a1b7990..578410f262aed 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -130,6 +130,7 @@ enum imx_pcie_variants {
>  #define IMX_PCIE_FLAG_SKIP_L23_READY		BIT(12)
>  /* Preserve MSI capability for platforms that require it */
>  #define IMX_PCIE_FLAG_KEEP_MSI_CAP		BIT(13)
> +#define IMX_PCIE_FLAG_PM_RUNTIME		BIT(14)
>
>  #define imx_check_flag(pci, val)	(pci->drvdata->flags & val)
>
> @@ -1973,6 +1974,13 @@ static int imx_pcie_probe(struct platform_device *pdev)
>  		 */
>  		imx_pcie_add_lut_by_rid(imx_pcie, 0);
>  	} else {
> +		if (imx_pcie->drvdata->flags & IMX_PCIE_FLAG_PM_RUNTIME) {
> +			pm_runtime_no_callbacks(dev);
> +			ret = devm_pm_runtime_set_active_enabled(dev);
> +			if (ret < 0)
> +				return ret;
> +		}
> +
>  		/*
>  		 * i.MX RC is powered off during suspend, force L2 entry to
>  		 * ensure proper endpoint notification before power loss.
> @@ -2121,6 +2129,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
>  		.flags = IMX_PCIE_FLAG_HAS_SERDES |
>  			 IMX_PCIE_FLAG_HAS_LUT |
>  			 IMX_PCIE_FLAG_8GT_ECN_ERR051586 |
> +			 IMX_PCIE_FLAG_PM_RUNTIME |
>  			 IMX_PCIE_FLAG_SUPPORTS_SUSPEND,
>  		.ltssm_off = IMX95_PE0_GEN_CTRL_3,
>  		.ltssm_mask = IMX95_PCIE_LTSSM_EN,
> --
> 2.34.1
>
>