From: Peng Fan <peng.fan@oss.nxp.com>
To: Frank Li <Frank.li@oss.nxp.com>
Cc: Linus Walleij <linusw@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Shenwei Wang <shenwei.wang@nxp.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
linux-gpio@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH v4 05/10] gpio: mxc: convert pad wakeup compatible checks to hwdata flags
Date: Fri, 9 Oct 2026 09:00:03 +0800 [thread overview]
Message-ID: <asg8k55GMcdQf+Ss@shlinux89> (raw)
In-Reply-To: <asf4m_H_XghR4G0t@SMW015318>
On Thu, Oct 08, 2026 at 03:10:03PM -0500, Frank Li wrote:
>On Wed, Oct 07, 2026 at 06:44:20PM +0800, Peng Fan (OSS) wrote:
>> From: Peng Fan <peng.fan@nxp.com>
>>
>> mxc_gpio_generic_config() and mxc_gpio_set_pad_wakeup() call
>> of_device_is_compatible() on every invocation to determine pad wakeup
>> capability and i.MX8QM-specific behavior. These properties are
>> invariant for the lifetime of the device.
>>
>> Extend the hwdata flags scheme introduced in the previous commit with
>> MXC_GPIO_HAS_PAD_WAKEUP and MXC_GPIO_IS_IMX8QM, adding dedicated
>> hwdata instances for imx8qm and imx8qxp (also used by imx8dxl).
>> This replaces the repeated device tree string comparisons in the
>> suspend/resume path with simple flag tests on static per-compatible
>> data.
>>
>> While at it, clean up mxc_gpio_generic_config() to use a local ret
>> variable for clarity instead of the == 0 comparison.
>>
>> Signed-off-by: Peng Fan <peng.fan@nxp.com>
>> ---
>> drivers/gpio/gpio-mxc.c | 46 ++++++++++++++++++++++++++++++++++------------
>> 1 file changed, 34 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
>> index c08f0b59d284..5da603569d88 100644
>> --- a/drivers/gpio/gpio-mxc.c
>> +++ b/drivers/gpio/gpio-mxc.c
>> @@ -34,6 +34,8 @@
>> #define IMX_SCU_WAKEUP_HIGH_LVL 7
>>
>> #define MXC_GPIO_HAS_POWER_OFF BIT(0)
>> +#define MXC_GPIO_HAS_PAD_WAKEUP BIT(1)
>> +#define MXC_GPIO_IS_IMX8QM BIT(2)
>
>Look like QM don't support fall edge
>
>Can you use MXC_GPIO_FALL_EDGE_WAKEUP_BROKEN?
>
>So it will be easy to know what feature missed for QM by hwdata.
ok. Fix in next version.
Thanks
Peng
>
>Frank
>
>>
>> /* device type dependent stuff */
>> struct mxc_gpio_hwdata {
>> @@ -132,6 +134,26 @@ static struct mxc_gpio_hwdata imx7d_gpio_hwdata = {
>> .flags = MXC_GPIO_HAS_POWER_OFF,
>> };
>>
>> +static struct mxc_gpio_hwdata imx8qm_gpio_hwdata = {
>> + MXC_GPIO_HW_DATA_COMMON,
>> + .flags = MXC_GPIO_IS_IMX8QM | MXC_GPIO_HAS_PAD_WAKEUP,
>> +};
>> +
>> +static struct mxc_gpio_hwdata imx8qxp_gpio_hwdata = {
>> + MXC_GPIO_HW_DATA_COMMON,
>> + .flags = MXC_GPIO_HAS_PAD_WAKEUP,
>> +};
>> +
>> +static inline bool mxc_gpio_is_imx8qm(struct mxc_gpio_port *port)
>> +{
>> + return port->hwdata->flags & MXC_GPIO_IS_IMX8QM;
>> +}
>> +
>> +static inline bool mxc_gpio_has_pad_wakeup(struct mxc_gpio_port *port)
>> +{
>> + return port->hwdata->flags & MXC_GPIO_HAS_PAD_WAKEUP;
>> +}
>> +
>> static inline bool mxc_gpio_has_power_off(struct mxc_gpio_port *port)
>> {
>> return port->hwdata->flags & MXC_GPIO_HAS_POWER_OFF;
>> @@ -158,9 +180,9 @@ static const struct of_device_id mxc_gpio_dt_ids[] = {
>> { .compatible = "fsl,imx31-gpio", .data = &imx31_gpio_hwdata },
>> { .compatible = "fsl,imx35-gpio", .data = &imx35_gpio_hwdata },
>> { .compatible = "fsl,imx7d-gpio", .data = &imx7d_gpio_hwdata },
>> - { .compatible = "fsl,imx8dxl-gpio", .data = &imx35_gpio_hwdata },
>> - { .compatible = "fsl,imx8qm-gpio", .data = &imx35_gpio_hwdata },
>> - { .compatible = "fsl,imx8qxp-gpio", .data = &imx35_gpio_hwdata },
>> + { .compatible = "fsl,imx8dxl-gpio", .data = &imx8qxp_gpio_hwdata },
>> + { .compatible = "fsl,imx8qm-gpio", .data = &imx8qm_gpio_hwdata },
>> + { .compatible = "fsl,imx8qxp-gpio", .data = &imx8qxp_gpio_hwdata },
>> { /* sentinel */ }
>> };
>> MODULE_DEVICE_TABLE(of, mxc_gpio_dt_ids);
>> @@ -575,15 +597,16 @@ static void mxc_gpio_restore_regs(struct mxc_gpio_port *port)
>> static bool mxc_gpio_generic_config(struct mxc_gpio_port *port,
>> unsigned int offset, unsigned long conf)
>> {
>> - struct device_node *np = port->dev->of_node;
>> + int ret;
>> +
>> + if (!mxc_gpio_has_pad_wakeup(port))
>> + return false;
>>
>> - if (of_device_is_compatible(np, "fsl,imx8dxl-gpio") ||
>> - of_device_is_compatible(np, "fsl,imx8qxp-gpio") ||
>> - of_device_is_compatible(np, "fsl,imx8qm-gpio"))
>> - return (gpiochip_generic_config(&port->gen_gc.gc,
>> - offset, conf) == 0);
>> + ret = gpiochip_generic_config(&port->gen_gc.gc, offset, conf);
>> + if (ret)
>> + return false;
>>
>> - return false;
>> + return true;
>> }
>>
>> static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable)
>> @@ -591,7 +614,6 @@ static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable)
>> unsigned long config;
>> bool ret = false;
>> int i, type;
>> - bool is_imx8qm = of_device_is_compatible(port->dev->of_node, "fsl,imx8qm-gpio");
>>
>> static const u32 pad_type_map[] = {
>> IMX_SCU_WAKEUP_OFF, /* 0 */
>> @@ -612,7 +634,7 @@ static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable)
>> else
>> config = IMX_SCU_WAKEUP_OFF;
>>
>> - if (is_imx8qm && config == IMX_SCU_WAKEUP_FALL_EDGE) {
>> + if (mxc_gpio_is_imx8qm(port) && config == IMX_SCU_WAKEUP_FALL_EDGE) {
>> dev_warn_once(port->dev,
>> "No falling-edge support for wakeup on i.MX8QM\n");
>> config = IMX_SCU_WAKEUP_OFF;
>>
>> --
>> 2.51.0
>>
>>
>
next prev parent reply other threads:[~2026-10-09 0:55 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-07 10:44 [PATCH v4 00/10] gpio: mxc: bug fixes and probe cleanup Peng Fan (OSS)
2026-10-07 10:44 ` [PATCH v4 01/10] gpio: mxc: fix race between chained IRQ handler install and probe completion Peng Fan (OSS)
2026-10-07 10:57 ` sashiko-bot
2026-10-08 9:44 ` Bartosz Golaszewski
2026-10-09 0:57 ` Peng Fan
2026-10-07 10:44 ` [PATCH v4 02/10] gpio: mxc: fix wakeup_pads bit operations Peng Fan (OSS)
2026-10-08 19:59 ` Frank Li
2026-10-09 0:59 ` Peng Fan
2026-10-07 10:44 ` [PATCH v4 03/10] gpio: mxc: use for_each_set_bit() to iterate wakeup pads Peng Fan (OSS)
2026-10-08 20:00 ` Frank Li
2026-10-07 10:44 ` [PATCH v4 04/10] gpio: mxc: replace of_device_is_compatible() with hwdata flags Peng Fan (OSS)
2026-10-08 20:05 ` Frank Li
2026-10-07 10:44 ` [PATCH v4 05/10] gpio: mxc: convert pad wakeup compatible checks to " Peng Fan (OSS)
2026-10-08 20:10 ` Frank Li
2026-10-09 1:00 ` Peng Fan [this message]
2026-10-07 10:44 ` [PATCH v4 06/10] gpio: mxc: convert probe error handling to devres Peng Fan (OSS)
2026-10-07 10:59 ` sashiko-bot
2026-10-08 9:47 ` Bartosz Golaszewski
2026-10-09 2:25 ` Peng Fan
2026-10-08 20:12 ` Frank Li
2026-10-09 2:18 ` Peng Fan
2026-10-07 10:44 ` [PATCH v4 07/10] gpio: mxc: switch probe error paths to dev_err_probe() Peng Fan (OSS)
2026-10-07 11:02 ` sashiko-bot
2026-10-08 20:15 ` Frank Li
2026-10-07 10:44 ` [PATCH v4 08/10] gpio: mxc: use local dev variable Peng Fan (OSS)
2026-10-07 11:03 ` sashiko-bot
2026-10-08 20:16 ` Frank Li
2026-10-07 10:44 ` [PATCH v4 09/10] gpio: mxc: introduce MXC_ICR macros and use field_prep/field_get Peng Fan (OSS)
2026-10-08 20:25 ` Frank Li
2026-10-07 10:44 ` [PATCH v4 10/10] gpio: mxc: use BIT() macro for single-bit operations Peng Fan (OSS)
2026-10-07 10:56 ` sashiko-bot
2026-10-09 2:32 ` Peng Fan
2026-10-08 20:26 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=asg8k55GMcdQf+Ss@shlinux89 \
--to=peng.fan@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=Frank.li@oss.nxp.com \
--cc=andy.shevchenko@gmail.com \
--cc=brgl@kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=shenwei.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox