* [PATCH v3 0/2] arm64: dts: freescale: imx93-var: Add Cortex-M33 configurations
@ 2026-11-19 16:00 Stefano Radaelli
2026-11-19 16:00 ` [PATCH v3 1/2] arm64: dts: freescale: imx93-var: Extract common Cortex-M33 configuration Stefano Radaelli
2026-11-19 16:00 ` [PATCH v3 2/2] arm64: dts: freescale: imx93-var: Add Cortex-M33 configurations Stefano Radaelli
0 siblings, 2 replies; 3+ messages in thread
From: Stefano Radaelli @ 2026-11-19 16:00 UTC (permalink / raw)
To: Frank Li, linux-kernel, devicetree, imx, linux-arm-kernel
Cc: pierluigi.p, Stefano Radaelli, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Daniel Baluta
This series adds Cortex-M33 overlays and combined DTBs for DART-MX93 on
Sonata and VAR-SOM-MX93 on Symphony.
The first patch extracts the existing DART-MX93 remoteproc configuration
into a common include without changing the resulting DTB. The second adds
the M33 variants, reserving the peripherals used by the firmware and
keeping dependent devices disabled. Remoteproc and MU1 are then enabled
only through the M33 overlays.
Changes in v3:
- Split the common configuration extraction and the M33 overlays into two
patches
- Use "reserved" for peripherals assigned to the M33 firmware; keep
"disabled" for dependent devices.
Changes in v2:
- Enable cm33 and MU1 only through the M33 overlay on DART-MX93.
Patch 2 uses the following binding and driver commits, already in
linux-next:
- ebb21cc5d1c0 ("dt-bindings: remoteproc: imx_rproc: Document
memory-region-names to avoid implicit ABI")
- 8396089f91fa ("remoteproc: imx_rpoc: Use memory-region-names to avoid
implicit ABI")
Validation used the remoteproc binding update and cebd1c0961d8
("dt-bindings: gpio: vf610: fix clock requirements per SoC"), which fixes
pre-existing GPIO schema errors. The base and M33 DTBs build and pass
schema validation.
No hardware testing was performed.
Stefano Radaelli (2):
arm64: dts: freescale: imx93-var: Extract common Cortex-M33
configuration
arm64: dts: freescale: imx93-var: Add Cortex-M33 configurations
arch/arm64/boot/dts/freescale/Makefile | 9 +++
.../dts/freescale/imx93-var-common-m33.dtsi | 24 ++++++++
.../freescale/imx93-var-dart-sonata-m33.dtso | 55 +++++++++++++++++++
.../dts/freescale/imx93-var-dart-sonata.dts | 2 +-
.../boot/dts/freescale/imx93-var-dart.dtsi | 14 -----
.../freescale/imx93-var-som-symphony-m33.dtso | 50 +++++++++++++++++
6 files changed, 139 insertions(+), 15 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-dart-sonata-m33.dtso
create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-som-symphony-m33.dtso
base-commit: 33adc96ac217d6e95b7c44ac383c19ca4ae2ff52
--
2.47.3
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v3 1/2] arm64: dts: freescale: imx93-var: Extract common Cortex-M33 configuration
2026-11-19 16:00 [PATCH v3 0/2] arm64: dts: freescale: imx93-var: Add Cortex-M33 configurations Stefano Radaelli
@ 2026-11-19 16:00 ` Stefano Radaelli
2026-11-19 16:00 ` [PATCH v3 2/2] arm64: dts: freescale: imx93-var: Add Cortex-M33 configurations Stefano Radaelli
1 sibling, 0 replies; 3+ messages in thread
From: Stefano Radaelli @ 2026-11-19 16:00 UTC (permalink / raw)
To: Frank Li, linux-kernel, devicetree, imx, linux-arm-kernel
Cc: pierluigi.p, Stefano Radaelli, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Daniel Baluta
From: Stefano Radaelli <stefano.r@variscite.com>
Move the DART-MX93 remoteproc and MU1 configuration into a common include
so it can be reused by the Variscite Cortex-M33 overlays.
Keep the common file included from imx93-var-dart.dtsi to preserve the
existing configuration.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
Changes in v3:
- Split the common configuration extraction into a separate patch,
preserving the existing DART-MX93 configuration.
.../dts/freescale/imx93-var-common-m33.dtsi | 22 +++++++++++++++++++
.../boot/dts/freescale/imx93-var-dart.dtsi | 15 +------------
2 files changed, 23 insertions(+), 14 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi
new file mode 100644
index 000000000000..de0e56f322a2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common Cortex-M33 configuration for Variscite i.MX93 modules
+ *
+ * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/* Use the reserved memory and resource table address from the carrier DTS. */
+&cm33 {
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&mu1 0 1
+ &mu1 1 1
+ &mu1 3 1>;
+ memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+ <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+ status = "okay";
+};
+
+&mu1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi
index 69495bb7fc9f..4ee4d74cadea 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/usb/pd.h>
#include "imx93.dtsi"
+#include "imx93-var-common-m33.dtsi"
/ {
model = "Variscite DART-MX93 Module";
@@ -54,16 +55,6 @@ wifi_pwrseq: wifi-pwrseq {
};
};
-&cm33 {
- mbox-names = "tx", "rx", "rxdb";
- mboxes = <&mu1 0 1>,
- <&mu1 1 1>,
- <&mu1 3 1>;
- memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
- <&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
- status = "okay";
-};
-
&eqos {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_eqos>;
@@ -221,10 +212,6 @@ bluetooth {
};
};
-&mu1 {
- status = "okay";
-};
-
&mu2 {
status = "okay";
};
--
2.47.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v3 2/2] arm64: dts: freescale: imx93-var: Add Cortex-M33 configurations
2026-11-19 16:00 [PATCH v3 0/2] arm64: dts: freescale: imx93-var: Add Cortex-M33 configurations Stefano Radaelli
2026-11-19 16:00 ` [PATCH v3 1/2] arm64: dts: freescale: imx93-var: Extract common Cortex-M33 configuration Stefano Radaelli
@ 2026-11-19 16:00 ` Stefano Radaelli
1 sibling, 0 replies; 3+ messages in thread
From: Stefano Radaelli @ 2026-11-19 16:00 UTC (permalink / raw)
To: Frank Li, linux-kernel, devicetree, imx, linux-arm-kernel
Cc: pierluigi.p, Stefano Radaelli, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Daniel Baluta
From: Stefano Radaelli <stefano.r@variscite.com>
Add Cortex-M33 overlays and combined DTBs for DART-MX93 on Sonata and
VAR-SOM-MX93 on Symphony. Use the common remoteproc configuration and
identify the existing reserved memory with memory-region-names.
Include the common configuration only from the overlays, so remoteproc
and MU1 are enabled only in the M33 variants. Use the -m33 DTB when
remoteproc support is needed.
Mark the peripherals used by the M33 firmware as reserved. Disable Wi-Fi,
Bluetooth and the devices depending on GPIO4. On Sonata, also disable USB
OTG1 because its USB-C role controller is unavailable.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
Changes in v3:
- Move the common configuration extraction to patch 1.
- Use "reserved" for peripherals assigned to the M33 firmware; keep
"disabled" for dependent devices.
Changes in v2:
- Enable cm33 and MU1 only through the M33 overlay on DART-MX93.
This patch uses the following binding and driver commits, already in
linux-next:
- ebb21cc5d1c0 ("dt-bindings: remoteproc: imx_rproc: Document
memory-region-names to avoid implicit ABI")
- 8396089f91fa ("remoteproc: imx_rpoc: Use memory-region-names to avoid
implicit ABI")
arch/arm64/boot/dts/freescale/Makefile | 9 +++
.../dts/freescale/imx93-var-common-m33.dtsi | 2 +
.../freescale/imx93-var-dart-sonata-m33.dtso | 55 +++++++++++++++++++
.../dts/freescale/imx93-var-dart-sonata.dts | 2 +-
.../boot/dts/freescale/imx93-var-dart.dtsi | 1 -
.../freescale/imx93-var-som-symphony-m33.dtso | 50 +++++++++++++++++
6 files changed, 117 insertions(+), 2 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-dart-sonata-m33.dtso
create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-som-symphony-m33.dtso
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index cfd548284358..05a7556e9de9 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -956,8 +956,17 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca-lvds-tm070jvhg33.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-mini-ezurio-wlan.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-mini-lvds-tm070jvhg33.dtb
+
+imx93-var-dart-sonata-m33-dtbs := imx93-var-dart-sonata.dtb imx93-var-dart-sonata-m33.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx93-var-dart-sonata.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-dart-sonata-m33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-dart-sonata-m33.dtbo
+
+imx93-var-som-symphony-m33-dtbs := imx93-var-som-symphony.dtb imx93-var-som-symphony-m33.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony-m33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony-m33.dtbo
+
dtb-$(CONFIG_ARCH_MXC) += imx93w-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93w-frdm.dtb
dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi
index de0e56f322a2..51b4cfe143d4 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi
@@ -14,6 +14,8 @@ &mu1 1 1
&mu1 3 1>;
memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+ memory-region-names = "vdev0buffer", "vdev0vring0", "vdev0vring1",
+ "vdev1vring0", "vdev1vring1", "rsc-table";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata-m33.dtso b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata-m33.dtso
new file mode 100644
index 000000000000..51ec0beea7c9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata-m33.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Cortex-M33 support for Variscite DART-MX93 on Sonata-Board
+ *
+ * Link: https://variscite.com/carrier-boards/sonata-board/
+ *
+ * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "imx93-var-common-m33.dtsi"
+
+/* Reserve the peripherals used by the Cortex-M33 firmware. */
+&flexcan1 {
+ status = "reserved";
+};
+
+&gpio4 {
+ status = "reserved";
+};
+
+&lpspi5 {
+ status = "reserved";
+};
+
+/* Disable Bluetooth along with Wi-Fi and release the JTAG pins. */
+&lpuart5 {
+ status = "disabled";
+};
+
+&lpuart7 {
+ status = "reserved";
+};
+
+/* The USB-C role controller uses an interrupt on GPIO4. */
+&ptn5150 {
+ status = "disabled";
+};
+
+/* The USB-C role controller is unavailable. */
+&usbotg1 {
+ status = "disabled";
+};
+
+/* Wi-Fi reset is connected to GPIO4. */
+&usdhc3 {
+ status = "disabled";
+};
+
+&wifi_pwrseq {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts
index 1ca3ec8330d0..e3afd0efe5c7 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts
@@ -291,7 +291,7 @@ ft5x06_ts: touchscreen@38 {
};
/* USB Type-C Controller */
- typec@3d {
+ ptn5150: typec@3d {
compatible = "nxp,ptn5150";
reg = <0x3d>;
interrupt-parent = <&gpio4>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi
index 4ee4d74cadea..6c596d61bd21 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-var-dart.dtsi
@@ -12,7 +12,6 @@
#include <dt-bindings/usb/pd.h>
#include "imx93.dtsi"
-#include "imx93-var-common-m33.dtsi"
/ {
model = "Variscite DART-MX93 Module";
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony-m33.dtso b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony-m33.dtso
new file mode 100644
index 000000000000..8df03ed3c004
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony-m33.dtso
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Cortex-M33 support for Variscite VAR-SOM-MX93 on Symphony-Board
+ *
+ * Link: https://variscite.com/carrier-boards/symphony-board/
+ *
+ * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "imx93-var-common-m33.dtsi"
+
+/* The resistive touchscreen uses GPIO4. */
+&ads7846 {
+ status = "disabled";
+};
+
+/* Reserve the peripherals used by the Cortex-M33 firmware. */
+&flexcan1 {
+ status = "reserved";
+};
+
+&gpio4 {
+ status = "reserved";
+};
+
+&lpspi6 {
+ status = "reserved";
+};
+
+/* Disable Bluetooth along with Wi-Fi and release the JTAG pins. */
+&lpuart5 {
+ status = "disabled";
+};
+
+&lpuart7 {
+ status = "reserved";
+};
+
+/* Wi-Fi reset is connected to GPIO4. */
+&usdhc3 {
+ status = "disabled";
+};
+
+&usdhc3_pwrseq {
+ status = "disabled";
+};
--
2.47.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-11-19 16:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-19 16:00 [PATCH v3 0/2] arm64: dts: freescale: imx93-var: Add Cortex-M33 configurations Stefano Radaelli
2026-11-19 16:00 ` [PATCH v3 1/2] arm64: dts: freescale: imx93-var: Extract common Cortex-M33 configuration Stefano Radaelli
2026-11-19 16:00 ` [PATCH v3 2/2] arm64: dts: freescale: imx93-var: Add Cortex-M33 configurations Stefano Radaelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox