Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: vladimir.oltean@nxp.com
Cc: imx@lists.linux.dev, Frank.Li@kernel.org
Subject: Re: [PATCH v4 net 5/8] net: enetc: ensure head buffer has at least 16 octets
Date: Fri, 16 Oct 2026 10:56:57 +0000	[thread overview]
Message-ID: <sashiko-outbox-174214@kernel.org> (raw)
In-Reply-To: <20261015105536.1692348-6-vladimir.oltean@nxp.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] enetc: missing lock release on dropped one-step tstamp packets
--

commit 9392e5d35a9d4208a5ea777cd38ae2adf7ac8c86
Author: vladimir.oltean@nxp.com <vladimir.oltean@nxp.com>
net: enetc: ensure head buffer has at least 16 octets

This commit addresses a hardware issue in ENETC devices where transmitting
frames with a head buffer under 16 bytes causes an interrupt storm. It adds
a check in enetc_start_xmit to pull at least 16 bytes into the linear skb
header, dropping the packet if that fails.

Closes: https://lore.kernel.org/netdev/b3d9136c-2803-4203-b1ea-1f9e62de80a1@gmail.com/

> diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
> index 707c17fe4a4c5..89b47accbac84 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc.c
> @@ -1079,6 +1079,12 @@ static netdev_tx_t enetc_start_xmit(struct sk_buff *skb,
>  		if (eth_skb_pad(skb))
>  			return NETDEV_TX_OK;
>  
> +		if (unlikely(skb_headlen(skb) < ENETC_MIN_BUFF_SIZE &&
> +			     !pskb_may_pull(skb, ENETC_MIN_BUFF_SIZE))) {
> +			dev_kfree_skb_any(skb);
> +			return NETDEV_TX_OK;
> +		}
> +

[Severity: High]
Does this error path miss releasing the bit lock for one-step timestamp
packets?

Earlier in enetc_start_xmit(), the bit lock is acquired for packets with
the ENETC_F_TX_ONESTEP_SYNC_TSTAMP flag:

        if (enetc_cb->flag & ENETC_F_TX_ONESTEP_SYNC_TSTAMP) {
                if (test_and_set_bit_lock(ENETC_TX_ONESTEP_TSTAMP_IN_PROGRESS,
                                          &priv->flags)) {
                        skb_queue_tail(&priv->tx_skbs, skb);
                        return NETDEV_TX_OK;
                }
        }

If the newly added pskb_may_pull() check fails, the packet is freed and the
function returns NETDEV_TX_OK without clearing the previously acquired lock.

Could this leave the ENETC_TX_ONESTEP_TSTAMP_IN_PROGRESS bit permanently set,
causing subsequent one-step timestamp packets to queue infinitely to tx_skbs
without ever being dequeued?

>  		if (unlikely(skb_shinfo(skb)->nr_frags > priv->max_frags))
>  			if (unlikely(skb_linearize(skb)))
>  				goto drop_packet_err;

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261015105536.1692348-1-vladimir.oltean@nxp.com?part=5

  reply	other threads:[~2026-10-16 10:56 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-15 10:55 [PATCH v4 net 0/8] Fix short frame transmission in enetc vladimir.oltean
2026-10-15 10:55 ` [PATCH v4 net 1/8] net: enetc: consistently track dropped frames in enetc_xdp_xmit() vladimir.oltean
2026-10-16 10:56   ` sashiko-bot
2026-10-15 10:55 ` [PATCH v4 net 2/8] net: enetc: serialize access to the same TX ring from NAPI XDP_TX and ndo_xdp_xmit() vladimir.oltean
2026-10-16 10:56   ` sashiko-bot
2026-10-15 10:55 ` [PATCH v4 net 3/8] net: enetc: fix bogus TX ring consumer index after reinitialization vladimir.oltean
2026-10-15 10:55 ` [PATCH v4 net 4/8] net: enetc: do not rely on mEMAC hardware frame padding vladimir.oltean
2026-10-16 10:56   ` sashiko-bot
2026-10-15 10:55 ` [PATCH v4 net 5/8] net: enetc: ensure head buffer has at least 16 octets vladimir.oltean
2026-10-16 10:56   ` sashiko-bot [this message]
2026-10-15 10:55 ` [PATCH v4 net 6/8] net: enetc: pad short XDP frames in software vladimir.oltean
2026-10-15 10:55 ` [PATCH v4 net 7/8] net: enetc: fix leak of pending XDP_TX frames when going down vladimir.oltean
2026-10-15 10:55 ` [PATCH v4 net 8/8] net: enetc: ensure enetc_xdp_xmit() calls enetc_update_tx_ring_tail() vladimir.oltean
2026-10-16 10:56   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-174214@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=Frank.Li@kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=sashiko-reviews@lists.linux.dev \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox