* [patch dracut v2] fix teamd exec in case config does not include devname
@ 2013-01-10 14:02 Jiri Pirko
[not found] ` <1357826571-1877-1-git-send-email-jiri-rHqAuBHg3fBzbRFIqnYvSA@public.gmane.org>
0 siblings, 1 reply; 3+ messages in thread
From: Jiri Pirko @ 2013-01-10 14:02 UTC (permalink / raw)
To: initramfs-u79uwXL29TY76Z2rM5mHXA
Cc: harald-H+wXaHxf7aLQT0dZR+AlfA, amwang-H+wXaHxf7aLQT0dZR+AlfA,
dyoung-H+wXaHxf7aLQT0dZR+AlfA
In case that configuration file did not include name of team device,
teamd would not start. Fix this by adding "-t" parameter.
Signed-off-by: Jiri Pirko <jiri-rHqAuBHg3fBzbRFIqnYvSA@public.gmane.org>
---
v2->v1:
-fixed bad order of args
modules.d/40network/ifup.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/modules.d/40network/ifup.sh b/modules.d/40network/ifup.sh
index 216b1e3..6c3133e 100755
--- a/modules.d/40network/ifup.sh
+++ b/modules.d/40network/ifup.sh
@@ -187,7 +187,7 @@ if [ -e /tmp/team.info ]; then
fi
done
# Do not add slaves now
- teamd -d -U -n -f /etc/teamd/$teammaster.conf
+ teamd -d -U -n -t $teammaster -f /etc/teamd/$teammaster.conf
for slave in $working_slaves; do
# team requires the slaves to be down before joining team
ip link set $slave down
--
1.8.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [patch dracut v2] fix teamd exec in case config does not include devname
[not found] ` <1357826571-1877-1-git-send-email-jiri-rHqAuBHg3fBzbRFIqnYvSA@public.gmane.org>
@ 2013-01-10 14:10 ` Cong Wang
2013-01-22 14:35 ` Harald Hoyer
1 sibling, 0 replies; 3+ messages in thread
From: Cong Wang @ 2013-01-10 14:10 UTC (permalink / raw)
To: Jiri Pirko
Cc: initramfs-u79uwXL29TY76Z2rM5mHXA, harald-H+wXaHxf7aLQT0dZR+AlfA,
dyoung-H+wXaHxf7aLQT0dZR+AlfA
On Thu, 2013-01-10 at 15:02 +0100, Jiri Pirko wrote:
> In case that configuration file did not include name of team device,
> teamd would not start. Fix this by adding "-t" parameter.
>
> Signed-off-by: Jiri Pirko <jiri-rHqAuBHg3fBzbRFIqnYvSA@public.gmane.org>
> ---
>
> v2->v1:
> -fixed bad order of args
Looks good! I didn't test the ifcfg case.
Acked-by: Cong Wang <amwang-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Thanks!
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [patch dracut v2] fix teamd exec in case config does not include devname
[not found] ` <1357826571-1877-1-git-send-email-jiri-rHqAuBHg3fBzbRFIqnYvSA@public.gmane.org>
2013-01-10 14:10 ` Cong Wang
@ 2013-01-22 14:35 ` Harald Hoyer
1 sibling, 0 replies; 3+ messages in thread
From: Harald Hoyer @ 2013-01-22 14:35 UTC (permalink / raw)
To: Jiri Pirko
Cc: initramfs-u79uwXL29TY76Z2rM5mHXA, amwang-H+wXaHxf7aLQT0dZR+AlfA,
dyoung-H+wXaHxf7aLQT0dZR+AlfA
Am 10.01.2013 15:02, schrieb Jiri Pirko:
> In case that configuration file did not include name of team device,
> teamd would not start. Fix this by adding "-t" parameter.
>
> Signed-off-by: Jiri Pirko <jiri-rHqAuBHg3fBzbRFIqnYvSA@public.gmane.org>
> ---
>
> v2->v1:
> -fixed bad order of args
>
> modules.d/40network/ifup.sh | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/modules.d/40network/ifup.sh b/modules.d/40network/ifup.sh
> index 216b1e3..6c3133e 100755
> --- a/modules.d/40network/ifup.sh
> +++ b/modules.d/40network/ifup.sh
> @@ -187,7 +187,7 @@ if [ -e /tmp/team.info ]; then
> fi
> done
> # Do not add slaves now
> - teamd -d -U -n -f /etc/teamd/$teammaster.conf
> + teamd -d -U -n -t $teammaster -f /etc/teamd/$teammaster.conf
> for slave in $working_slaves; do
> # team requires the slaves to be down before joining team
> ip link set $slave down
>
merged
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-01-22 14:35 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-10 14:02 [patch dracut v2] fix teamd exec in case config does not include devname Jiri Pirko
[not found] ` <1357826571-1877-1-git-send-email-jiri-rHqAuBHg3fBzbRFIqnYvSA@public.gmane.org>
2013-01-10 14:10 ` Cong Wang
2013-01-22 14:35 ` Harald Hoyer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox